 | This article includes a list of general references, but it lacks sufficient corresponding inline citations .(February 2008) |
Cable knitting is a style of knitting in which textures of crossing layers are achieved by permuting stitches. For example, given four stitches appearing on the needle in the order ABCD, one might cross the first two (in front of or behind) the next two, so that in subsequent rows those stitches appear in the new order CDAB.
The stitches crossing behind are transferred to a small cable needle for storage while the stitches passing in front (or behind) are knitted. The former stitches are then transferred back to the original needle or knitted from the cable needle itself. Rather than use a cable needle, some knitters prefer to use a large safety pin or, for a single stitch, simply hold it in their fingers while knitting the other stitch(es). Cabling is typically done only when working on the right side of the fabric, i.e., every other row. This creates a spacer row, which helps the fabric to relax.
Cable knitting usually produces a fabric that is less flexible and more dense than typical knitting, having a much narrower gauge. This narrow gauge should be considered when changing from the cable stitch to another type of knitted fabric. If the number of stitches is not reduced, the second knitted fabric may flare out or pucker, due to its larger gauge. Thus, ribbed cuffs on an aran sweater may not contract around the wrist or waist, as would normally be expected. Conversely, stitches may need to be added to maintain the gauge when changing from another knitted fabric such as stocking to a cable pattern.
Cables are usually done in stocking stitch and surrounded with reverse stocking; this causes the cables to stand out against a receding background. But any combination will do; for example, a background seed stitch in the regions bounded by cables often looks striking. Another visually intriguing effect is meta-cabling, where the cable itself is made up of cables, such as a three-cable plait made of strands that are themselves 2-cable plaits. In such cases, the "inner" cables sometimes go their separate ways, forming beautiful, complex patterns such as the branches of a tree. Another interesting effect is to have one cable "pierce" another cable, rather than having it pass over or under the other.
Cable direction can have a left or right slant. Holding stitches to the front of the work on the cable needle creates a cable cross to the left. Holding the stitches to the back of the work will create a slant to the right. [1]
Two cables should cross each other completely in a single row because making an intermediate crossing row of fewer stitches look good is very difficult. For example, where a pair of three-stitch-wide cables cross, all three stitches of one should cross over the three of the other cable.
Cables are often used to make braid patterns. Usually, the cables themselves are with a knit stitch while the background is done in purl. As the number of cables increases, the number of crossing patterns increases, as described by the braid group. Various visual effects are also possible by shifting the center lines of the undulating cables, or by changing the space between the cables, making them denser or more open.
A one-cable serpentine is simply a cable that moves sinusoidally left and right as it progresses. Higher-order braids are often made with such serpentines crossing over and under each other.
A two-cable braid can look like a rope, if the cables always cross in the same way (e.g., left over right). Alternatively, it can look like two serpentines, one on top of the other.
A three-cable braid is usually a simple plait (as often seen styled in long hair), but can also be made to look like the links in a chain, or as three independent serpentines.
A four-cable braid allows for several crossing patterns.
The five-cable braid is sometimes called the Celtic princess braid, and is visually interesting because one side is cresting while the other side is in a trough. Thus, it has a shimmering quality, similar to a kris dagger.
The six-cable braid is also called a Saxon braid, and looks square and solid. This is a large motif, often used as a centerpiece of an Aran sweater or along the neckline and hemlines.
The seven-cable braid is rarely used, possibly because it is very wide.
A cable pattern is like a set of serpentine or wave-like cables, each one meandering around its own center line. A vast variety of cable patterns can be invented by changing the number of cables, the separations of their center lines, the amplitudes of their waves (i.e., how far they wander from their center line), the shape of the waves (e.g., sinusoidal versus triangular), and the relative position of the crests and troughs of each wave (e.g., one wave crests as another is crossing its center line).
New cable patterns can also be inspired by pictures, scenes from nature, Celtic knotwork, and even the double helix of DNA.
In some cases, one can form a lattice of cables, a kind of ribbing made of cables where the individual cable strands can be exchanged freely. A typical example is a set of parallel two-cable plaits in which, every so often, the two cables of each plait separate, going left and right and integrating themselves in the neighbouring cables. In the process, the right-going cable of one plait crosses the left-going cable of its neighbour, forming an "X".
Many patterns made with cables do not have a rope-like quality. For example, a deep honeycomb pattern can be made by adjacent serpentines, first touching the neighbor on the left then the neighbor on the right. Other common patterns include a "Y"-like shape (and its inverse) and a horseshoe crab pattern.
Many consider cable knitting to reach its heights in the Aran sweater, which consists of panels of different cable patterns.
Knitting is a method for production of textile fabrics by interlacing yarn loops with loops of the same or other yarns. It is used to create many types of garments. Knitting may be done by hand or by machine.
A knitting needle or knitting pin is a tool in hand-knitting to produce knitted fabrics. They generally have a long shaft and taper at their end, but they are not nearly as sharp as sewing needles. Their purpose is two-fold. The long shaft holds the active (unsecured) stitches of the fabric, to prevent them from unravelling, whereas the tapered ends are used to form new stitches. Most commonly, a new stitch is formed by inserting the tapered end through an active stitch, catching a loop of fresh yarn and drawing it through the stitch; this secures the initial stitch and forms a new active stitch in its place. In specialized forms of knitting the needle may be passed between active stitches being held on another needle, or indeed between/through inactive stitches that have been knit previously.
Knitting is the process of using two or more needles to pull and loop yarn into a series of interconnected loops in order to create a finished garment or some other type of fabric. The word is derived from knot, thought to originate from the Dutch verb knutten, which is similar to the Old English cnyttan, "to knot". Its origins lie in the basic human need for clothing for protection against the elements. More recently, hand knitting has become less a necessary skill and more of a hobby.
Fair Isle (/fɛəraɪ̯l/) is a traditional knitting technique used to create patterns with multiple colours. It is named after Fair Isle, one of the Shetland Islands. Fair Isle knitting gained considerable popularity when the Prince of Wales wore Fair Isle jumpers in public in 1921. Traditional Fair Isle patterns have a limited palette of five or so colours, use only two colours per row, are worked in the round, and limit the length of a run of any particular colour.
Intarsia is a knitting technique used to create patterns with multiple colours. As with the woodworking technique of the same name, fields of different colours and materials appear to be inlaid in one another, fit together like a jigsaw puzzle.
The term "gauge" is used in knitting to describe the fineness size of knitting machines. It is used in both hand knitting and machine knitting. The phrase in both instances refers to the number of stitches per inch rather than the size of the finished article of clothing. The gauge is calculated by counting the stitches or needles across a number of inches, then dividing by the sample's width in inches.
A knitting machine is a device used to create knitted fabrics in a semi or fully automated fashion. There are numerous types of knitting machines, ranging from simple spool or board templates with no moving parts to highly complex mechanisms controlled by electronics. All, however, produce various types of knitted fabrics, usually either flat or tubular, and of varying degrees of complexity. Pattern stitches can be selected by hand manipulation of the needles, push-buttons and dials, mechanical punch cards, or electronic pattern reading devices and computers.
Slip-stitch knitting is a family of knitting techniques that uses slip stitches to make multiple fabrics simultaneously, to make extra-long stitches, and/or to carry over colors from an earlier row.
In knitting, an increase is the creation of one or more new stitches, which may be done by various methods that create distinctive effects in the fabric. Most knitting increases either lean towards the left or the right.
In knitting, ribbing is a pattern in which vertical stripes of stockinette stitch alternate with vertical stripes of reverse stockinette stitch. These two types of stripes may be separated by other stripes in which knit and purl stitches alternate vertically; such plissé stripes add width and depth to ribbing but not more elasticity.
In knitting, casting on is a family of techniques for adding new stitches that do not depend on earlier stitches, i.e., having an independent lower edge. In principle, it is the opposite of binding off, but the techniques involved are generally unrelated.
Knitting abbreviations are often used for brevity in describing knitting patterns.
In knitting, welting is the horizontal analog of ribbing; that is, one or more horizontal rows of knit stitches alternating with one or more rows of purl stitches.
In knitting, a plaited stitch, also known as a twisted stitch, is a single knitted stitch that is twisted clockwise or counterclockwise, usually by one half-turn (180°) but sometimes by a full turn (360°) or more.
Basic knitted fabrics include stocking stitch, reverse stocking stitch, garter stitch, seed stitch, faggoting, and tricot. In some cases, these fabrics appear differently on the right side than on the wrong side.
Knitted fabric is a textile that results from knitting, the process of inter-looping of yarns or inter-meshing of loops. Its properties are distinct from woven fabric in that it is more flexible and can be more readily constructed into smaller pieces, making it ideal for socks and hats.
Hand knitting is a form of knitting, in which the knitted fabric is produced by hand using needles.
Aran knitting patterns are heavily textured knitting patterns which are named after the Aran Islands, which are located off the west coast of Ireland from County Galway and County Clare. The patterns are knitted into socks, hats, vests, scarves, mittens, afghans, pillow covers, and, most commonly, sweaters.
Twined knitting is a traditional Scandinavian knitting technique. It refers to knitting where two strands of yarn are knitted into the fabric alternatively and twisted once and always in the same direction before every stitch. The technique is called tvåändsstickning in Swedish, tvebandsstrikking in Norwegian, and tvebinding in Danish. Their literal meaning is "two-end knitting", referring to the traditional way of knitting with both yarn ends from one ball of yarn.
| Tools and materials |  | |
|---|---|---|
| Yarn styles | ||
| Yarn brands | ||
| Styles | ||
| Stitches | ||
| Techniques |
| |
| Patterns | ||
| Machine knitting | ||
| Knitters and designers | ||
| Organizations | ||
| Related | ||