This article includes a list of general references, but it lacks sufficient corresponding inline citations .(February 2008) |
Basic knitted fabrics include stocking stitch, reverse stocking stitch, garter stitch, seed stitch, faggoting, and tricot. In some cases, these fabrics appear differently on the right side (as seen when making the stitch) than on the wrong side (as seen from the other side, when the work is turned).
Stocking stitch (in US, stockinette stitch) is the most basic knitted fabric; every stitch (as seen from the right side) is a knit stitch. [1] This fabric has also been referred to as Knit or Knitted, Front, Smooth, Jersey, Plain, Vertical and Plain Sweater Fabric. [2] [3] [4] In the round, stocking stitch is produced by knitting every stitch; by contrast, in the flat, stocking stitch is produced by knitting and purling alternate rows. Variations on this fabric can be made by twisting stitches (knitting or purling through the back of each loop on the needle instead of the front) on one or both sides; [4] [3] Barbara Walker calls these "crossed" (only knitted stitches twisted) and "twisted" (knits and purl twisted) Stockinette. [3]
Stocking-stitch fabric is very smooth and each column ("wale") resembles a stacked set of "V"'s. It has a strong tendency to curl horizontally and vertically because of the asymmetry of its faces.
Reverse stocking stitch (also called Reverse Stockinette, [5] Rough Fabric, Wrong Fabric [2] ) is produced in the same way as stocking, except that the purl stitches are done on the right side and the knit stitches on the wrong side. [1] In the round, reverse stocking stitch is produced by purling every stitch.
Garter stitch is the most basic form of welting (as seen from the right side). In the round, garter stitch is produced by knitting and purling alternate rounds. By contrast, in the flat, garter stitch is produced by knitting every stitch (or purling every stitch, though this is much less common, and often referred to as 'reverse garter stitch'). [6]
In garter-stitch fabrics, the "purl" rows stand out from the "knit" rows ( a similar effect is used in shadow knitting). Together, they form little horizontal ridges. Garter-stitch fabric has significant lengthwise elasticity and little tendency to curl, due to the symmetry of its faces.
Seed stitch is the most basic form of a basketweave pattern; knit and purl stitches alternate in every column ("wale") and every row ("course"). In other words, every knit stitch is flanked on all four sides (left and right, top and bottom) by purl stitches, and vice versa. Moss stitch (also called Irish/American moss stitch) is created by alternating between knit and purl stitches across every row as well. Here, however, there are always two knit stitches stacked upon each other in every column and they are flanked by two purl stitches on all four sides.
Seed/moss-stitch fabrics lie flat; the symmetry of their two faces prevents them from curling to one side or the other. Hence, it makes an excellent choice for edging, e.g., the central edges of a cardigan. However, seed stitch is "nubbly", not nearly as smooth as stockinette/stocking stitch.
Faggoting is a variation of lace knitting, in which every stitch is a yarn over or a decrease. There are several types of faggoting, but all are an extremely open lace similar to netting.
Like most lace fabrics, faggoting has little structural strength and deforms easily, so it has little tendency to curl despite being asymmetrical. Faggoting is stretchy and open, and most faggoting stitches look the same on both sides, making them ideal for garments like lacy scarves or stockings.
Tricot is a special case of warp knitting, in which the yarn zigzags vertically, following a single column ("wale") of knitting, rather than a single row ("course"), as is customary. Tricot and its relatives are very resistant to runs, and are commonly used in lingerie.
Other classes of basic knitted fabrics include ribbing, welting, and cables.
Knitting is a method for production of textile fabrics by interlacing yarn loops with loops of the same or other yarns. It is used to create many types of garments. Knitting may be done by hand or by machine.
Combined knitting or combination knitting is a knitting method that combines elements of Eastern-style knitting with the Western techniques. The name was suggested by Mary Thomas in her 1938 book "Mary Thomas's Knitting Book", where she described the method as "..the better way to work in Flat Knitting. The resulting fabric is more even and closer in construction." By wrapping the yarn the opposite way while purling, the knitter changes the orientation of the resulting loops; then the next row's knit stitches can be formed by inserting the needle through the back leg, rather than through the front leg, without twisting the stitch. This method is suitable for all knitted fabrics from the basic Stockinette stitch, to any other technique, such as Fair Isle, circular knitting, or lace knitting.
A knitting machine is a device used to create knitted fabrics in a semi or fully automated fashion. There are numerous types of knitting machines, ranging from simple spool or board templates with no moving parts to highly complex mechanisms controlled by electronics. All, however, produce various types of knitted fabrics, usually either flat or tubular, and of varying degrees of complexity. Pattern stitches can be selected by hand manipulation of the needles, push-buttons and dials, mechanical punch cards, or electronic pattern reading devices and computers.
Entrelac is a knitting technique used to create a textured diamond pattern. While the result resembles basket-woven strips of knitted fabric, the actual material comprises interconnected squares on two different orientations.
Lace knitting is a style of knitting characterized by stable "holes" in the fabric arranged with consideration of aesthetic value. Lace is sometimes considered the pinnacle of knitting, because of its complexity and because woven fabrics cannot easily be made to have holes. Famous examples include the Orenburg shawl and the wedding ring shawl of Shetland knitting, a shawl so fine that it could be drawn through a wedding ring. Shetland knitted lace became extremely popular in Victorian England when Queen Victoria became a Shetland lace enthusiast. Her enthusiasm resulted i.a. in her choosing knitted lacework for presents; e.g. when in ca. 1897 the Queen gave a lace shawl as a present to American abolitionist Harriet Tubman. From there, knitting patterns for the shawls were printed in English women's magazines where they were copied in Iceland with single ply wool.
Slip-stitch knitting is a family of knitting techniques that uses slip stitches to make multiple fabrics simultaneously, to make extra-long stitches, and/or to carry over colors from an earlier row.
In knitting, an increase is the creation of one or more new stitches, which may be done by various methods that create distinctive effects in the fabric. Most knitting increases either lean towards the left or the right.
In knitting, ribbing is a pattern in which vertical stripes of stockinette stitch alternate with vertical stripes of reverse stockinette stitch. These two types of stripes may be separated by other stripes in which knit and purl stitches alternate vertically; such plissé stripes add width and depth to ribbing but not more elasticity.
Knitting abbreviations are often used for brevity in describing knitting patterns.
In knitting, welting is the horizontal analog of ribbing; that is, one or more horizontal rows of knit stitches alternating with one or more rows of purl stitches.
In knitting, a basketweave pattern is characterized by intersecting ribs and welts.
Warp knitting is defined as a loop-forming process in which the yarn is fed into the knitting zone, parallel to the fabric selvage. It forms vertical loops in one course and then moves diagonally to knit the next course. Thus the yarns zigzag from side to side along the length of the fabric. Each stitch in a course is made by many different yarns. Each stitch in one wale is made by several different yarns.
Flat knitting is a method for producing knitted fabrics in which the work is turned periodically; that is, the fabric is worked with alternating sides facing the knitter. Another method of achieving the same result is to knit alternately from right to left and left to right without turning; this back-and-forth technique requires either innate or learned ambidextrous motor skills. The two sides of the fabric are usually designated as the right side and the wrong side.
In knitting, picking up stitches means adding stitches to the knitting needle that were previously bound off or belong to the selvage.
Double knitting is a form of hand knitting in which two fabrics are knitted simultaneously on one pair of needles. The fabrics may be inseparable, as in interlock knitted fabrics, or they can simply be two unconnected fabrics. In principle, an arbitrary number of fabrics can be knitted simultaneously on one pair of knitting needles with yarns, as long as one is careful.
Knitted fabric is a textile that results from knitting, the process of inter-looping of yarns or inter-meshing of loops. Its properties are distinct from woven fabric in that it is more flexible and can be more readily constructed into smaller pieces, making it ideal for socks and hats.
Hand knitting is a form of knitting, in which the knitted fabric is produced by hand using needles.
Illusion knitting or shadow knitting is a form of textile art, in which the knitting is viewed as simply narrow stripes from one angle, and as an image when viewed from another angle. Illusion knitting has been recognised as an art form since 2010, largely due to the advances made by Steve Plummer who has created several large and detailed pieces. Similar effects occur in Tunisian crochet.
Twined knitting is a traditional Scandinavian knitting technique. It refers to knitting where two strands of yarn are knitted into the fabric alternatively and twisted once and always in the same direction before every stitch. The technique is called tvåändsstickning in Swedish, tvebandsstrikking in Norwegian, and tvebinding in Danish. Their literal meaning is "two-end knitting", referring to the traditional way of knitting with both yarn ends from one ball of yarn.