Double knitting

Last updated
Double knitting. Double knitting.jpg
Double knitting.

Double knitting is a form of hand knitting in which two fabrics are knitted simultaneously on one pair of needles. The fabrics may be inseparable, as in interlock knitted fabrics, or they can simply be two unconnected fabrics. In principle, an arbitrary number of fabrics can be knitted simultaneously on one pair of knitting needles with yarns, as long as one is careful.

Contents

History

A famous example of double knitting is the pair of socks knitted simultaneously on one set of knitting needles by Anna Makarovna, the nanny in Leo Tolstoy's War and Peace :

When the pair was finished, she made a solemn ceremony of pulling one stocking out of the other in the presence of the children.

Double knit fabric

Double knit fabric is a fabric where both sides of the fabric are identical, for example, Interlock and Rib. These fabrics are knitted with two sets of needles on the circular knitting machine that form a material with the same face and back, unlike a single knitted fabric, [1] for instance, a single jersey that has a different appearance on the front and back. [2]

Double knit fabric became popular within 1970s fashion; in the 1988 Grammy Award–winning song "Parents Just Don't Understand", Will Smith comically excoriates his mother for forcing him to wear outdated, 1970s-era "double-knit reversible slacks". However, the double-knit fabric referred to is a machine-made, double-thick construction with some similarities to handmade double knitting (durability, reversibility) but none of the unique colorwork and construction possibilities.

Scuba knit fabric is a lofty double knit fabric, that was designed to mimic neoprene, [3] made from finely spun polyester fibers commonly with 2 way stretch that has a super smooth hand on both sides, low luster sheen and a full-bodied drape. [4] [5] Techno knit fabric is lighter weight and drapier than scuba knit fabric. [3]

Methods

There are several methods for double knitting, including flat knitting on double-pointed knitting needles. After one row has been worked with one yarn, the knitter slides the stitches to the other end of the needle and begins the same row with the next yarn. Only half the stitches are knitted with any one yarn; the rest are slipped. After both passes are done, the knitter then turns the work and begins another row.

Another common method is to alternate a knit stitch of yarn A with a purl stitch of yarn B. Since the yarn is held to the back for a knit, and to the front for a purl, this results in two sheets of stockinette stitches, with the wrong (purl) sides facing each other. Switching colors ties the two sides together for a single, double-thick fabric. This method is often used for elaborate, two-color designs, as there are few constraints on how the colors may be used. The finished item from this method is reversible, each side holding the negative image of the other.

Related Research Articles

<span class="mw-page-title-main">Knitting</span> Method of forming fabric

Knitting is a method for production of textile fabrics by interlacing yarn loops with loops of the same or other yarns. It is used to create many types of garments. Knitting may be done by hand or by machine.

<span class="mw-page-title-main">Knitting needle</span>

A knitting needle or knitting pin is a tool in hand-knitting to produce knitted fabrics. They generally have a long shaft and taper at their end, but they are not nearly as sharp as sewing needles. Their purpose is two-fold. The long shaft holds the active (unsecured) stitches of the fabric, to prevent them from unravelling, whereas the tapered ends are used to form new stitches. Most commonly, a new stitch is formed by inserting the tapered end through an active stitch, catching a loop of fresh yarn and drawing it through the stitch; this secures the initial stitch and forms a new active stitch in its place. In specialized forms of knitting the needle may be passed between active stitches being held on another needle, or indeed between/through inactive stitches that have been knit previously.

Intarsia is a knitting technique used to create patterns with multiple colours. As with the woodworking technique of the same name, fields of different colours and materials appear to be inlaid in one another, fit together like a jigsaw puzzle.

English knitting, also known as right-hand knitting or throwing, is a style of Western knitting where the yarn to be knit into the fabric is carried in the right hand. This style is prevalent throughout the English-speaking world, though it is by no means universal.

Combined knitting or combination knitting is a knitting method that combines elements of Eastern-style knitting with the Western techniques. The name was suggested by Mary Thomas in her 1938 book "Mary Thomas's Knitting Book", where she described the method as "..the better way to work in Flat Knitting. The resulting fabric is more even and closer in construction." By wrapping the yarn the opposite way while purling, the knitter changes the orientation of the resulting loops; then the next row's knit stitches can be formed by inserting the needle through the back leg, rather than through the front leg, without twisting the stitch. This method is suitable for all knitted fabrics from the basic Stockinette stitch, to any other technique, such as Fair Isle, circular knitting, or lace knitting.

<span class="mw-page-title-main">Knitting machine</span> Device used to create knitted fabrics

A knitting machine is a device used to create knitted fabrics in a semi or fully automated fashion. There are numerous types of knitting machines, ranging from simple spool or board templates with no moving parts to highly complex mechanisms controlled by electronics. All, however, produce various types of knitted fabrics, usually either flat or tubular, and of varying degrees of complexity. Pattern stitches can be selected by hand manipulation of the needles, push-buttons and dials, mechanical punch cards, or electronic pattern reading devices and computers.

<span class="mw-page-title-main">Entrelac</span> Knitting technique used to create a textured diamond pattern

Entrelac is a knitting technique used to create a textured diamond pattern. While the result resembles basket-woven strips of knitted fabric, the actual material comprises interconnected squares on two different orientations.

<span class="mw-page-title-main">Slip-stitch knitting</span> Family of knitting techniques

Slip-stitch knitting is a family of knitting techniques that uses slip stitches to make multiple fabrics simultaneously, to make extra-long stitches, and/or to carry over colors from an earlier row.

<span class="mw-page-title-main">Increase (knitting)</span> Knitting term

In knitting, an increase is the creation of one or more new stitches, which may be done by various methods that create distinctive effects in the fabric. Most knitting increases either lean towards the left or the right.

<span class="mw-page-title-main">Casting on (knitting)</span>

In knitting, casting on is a family of techniques for adding new stitches that do not depend on earlier stitches, i.e., having an independent lower edge. In principle, it is the opposite of binding off, but the techniques involved are generally unrelated.

In knitting, binding off, or casting off, is a family of techniques for ending a column of stitches. Binding off is typically used to define the final edge of a knitted fabric, although it may also be used in other contexts, e.g., in making button holes. In principle, binding off is the opposite of casting on, but the techniques are generally not mirror images of one another. Sometimes, however, they can produce a mirror image appearance.

Knitting abbreviations are often used for brevity in describing knitting patterns.

<span class="mw-page-title-main">Short row (knitting)</span>

In knitting, a short row is a row that is not fully knitted; the work is turned before reaching the end of the row. When working short rows, technique must be employed to prevent holes or gaps where the work is turned. There are several ways to do this. Among the most common are (1) Wrap and Turn, (2) German short rows and (3) Japanese short rows.

Basic knitted fabrics include stocking stitch, reverse stocking stitch, garter stitch, seed stitch, faggoting, and tricot. In some cases, these fabrics appear differently on the right side than on the wrong side.

<span class="mw-page-title-main">Flat knitting</span>

Flat knitting is a method for producing knitted fabrics in which the work is turned periodically; that is, the fabric is worked with alternating sides facing the knitter. Another method of achieving the same result is to knit alternately from right to left and left to right without turning; this back-and-forth technique requires either innate or learned ambidextrous motor skills. The two sides of the fabric are usually designated as the right side and the wrong side.

<span class="mw-page-title-main">Knitted fabric</span> Textile material made using knitting techniques, often by machine knitting

Knitted fabric is a textile that results from knitting, the process of inter-looping of yarns or inter-meshing of loops. Its properties are distinct from woven fabric in that it is more flexible and can be more readily constructed into smaller pieces, making it ideal for socks and hats.

Hand knitting is a form of knitting, in which the knitted fabric is produced by hand using needles.

<span class="mw-page-title-main">Illusion knitting</span> Form of textile art

Illusion knitting or shadow knitting is a form of textile art, in which the knitting is viewed as simply narrow stripes from one angle, and as an image when viewed from another angle. Illusion knitting has been recognised as an art form since 2010, largely due to the advances made by Steve Plummer who has created several large and detailed pieces. Similar effects occur in Tunisian crochet.

<span class="mw-page-title-main">Ponte (Fabric)</span> Type of knit fabric pattern

Ponte is a thick, double knit fabric design produced on double jersey knitting machines. It is one of the firm, stable structures of knits with a subtle sheen. This fabric is heavier and thicker than a regular jersey. As with most of the other double knit designs, Ponte is reversible. The fabric is also known as ''Ponte di Roma.''

<span class="mw-page-title-main">Twined knitting</span> Knitting technique

Twined knitting is a traditional Scandinavian knitting technique. It refers to knitting where two strands of yarn are knitted into the fabric alternatively and twisted once and always in the same direction before every stitch. The technique is called tvåändsstickning in Swedish, tvebandsstrikking in Norwegian, and tvebinding in Danish. Their literal meaning is "two-end knitting", referring to the traditional way of knitting with both yarn ends from one ball of yarn.

References

  1. Jerde, Judith (1992). Encyclopedia of textiles. Internet Archive. New York : Facts on File. p. 56. ISBN   978-0-8160-2105-5.
  2. Cresswell, Lesley (2002). Textiles. Student book. Susanna Watkins (New ed.). Oxford: Heinemann Educational. p. 161. ISBN   978-0-435-41786-4. OCLC   49044746.
  3. 1 2 "How to press scuba knit and more: Tips for working with scuba fabric". Sie Macht. 16 March 2017. Retrieved 4 July 2022.
  4. "What is Scuba Fabric?". Wicked Fabrics. Retrieved 4 July 2022.
  5. "Scuba Knit Fabric". Fabric.com. Retrieved 4 July 2022.