Cetane number

Last updated

Cetane number (cetane rating) (CN) is an indicator of the combustion speed of diesel fuel and compression needed for ignition. It plays a similar role for diesel as octane rating does for gasoline. The CN is an important factor in determining the quality of diesel fuel, but not the only one; other measurements of diesel fuel's quality include (but are not limited to) energy content, density, lubricity, cold-flow properties and sulphur content. [1]

Contents

Definition

The cetane number of a fuel is defined by finding a blend of cetane and isocetane with the same ignition delay. Cetane has a cetane number defined to be 100, while isocetane's measured cetane number is 15, replacing the former reference fuel alpha-methylnaphthalene, which was assigned a cetane number of 0. Once the blend is known, the cetane number is calculated as a volume-weighted average, rounded to the nearest whole number, of cetane's 100 and heptamethylnonane's 15. [2]

cetane number = % n-cetane + 0.15(% heptamethylnonane) [2]

Cetane number is an inverse function of a fuel's ignition delay, the time period between the start of ignition and the first identifiable pressure increase during combustion of the fuel. In a particular diesel engine, higher cetane fuels will have shorter ignition delay periods than lower cetane fuels. Cetane numbers are only used for the relatively light distillate diesel oils. For heavy (residual) fuel oil two other scales are used, CCAI and CII.

Typical values

Generally, diesel engines operate well with a CN from 48 to 50. Fuels with lower cetane number have longer ignition delays, requiring more time for the fuel combustion process to be completed. Hence, higher speed diesel engines operate more effectively with higher cetane number fuels.

In Europe, diesel cetane numbers were set at a minimum of 38 in 1994 and 40 in 2000. The standard for diesel sold in European Union, Iceland, Norway and Switzerland is defined by standard EN 590. Since 1 January 2001 EN 590 demands a minimum cetane index of 46 and a minimum cetane number of 51. Premium diesel fuel can have a cetane number as high as 60. [3]

In Finland, premium diesel fuels sold by filling station chains St1 (Diesel Plus), Shell (containing GTL) and ABC (Smart Diesel) have a minimum cetane number of 60 with the typical value being at 63. [4] [5] [6] Neste MY Renewable Diesel sold in Finland has a minimum cetane number of 70. [7]

In North America, most states adopt ASTM D975 as their diesel fuel standard and the minimum cetane number is set at 40, with typical values in the 42-45 range. Premium diesel fuel may or may not have higher cetane number depending on the supplier. Premium diesel often use additives to improve CN and lubricity, detergents to clean the fuel injectors and minimize carbon deposits, water dispersants, and other additives depending on geographical and seasonal needs.[ citation needed ]. California diesel fuel has a minimum cetane of 53. [8] Under the Texas Low Emission Diesel (TxLED) program there are 110 counties where diesel fuel must have a cetane number of 48 or greater, or else must use an approved alternative formulation or comply with the designated alternative limits. [9]

Neste MY Renewable Diesel sold in North America has a cetane number of 70+. [10]

Additives

Alkyl nitrates (principally 2-ethylhexyl nitrate [11] ) and di-tert-butyl peroxide are used as additives to raise the cetane number.

Alternative fuels

Biodiesel from vegetable oil sources have been recorded as having a cetane number range of 46 to 52, and animal-fat based biodiesels cetane numbers range from 56 to 60. [12] Dimethyl ether is a potential diesel fuel as it has a high cetane rating (55-60) and can be produced as a biofuel. [13] Most simple ethers, including liquid ones, such as diethyl ether can be used as diesel fuels, although the lubricity can be of concern.

Chemical relevance

Cetane is the hydrocarbon with chemical formulas C16H34 and specifically the structural formula CH3(CH2)14CH3. Also named n-hexadecane, it is an unbranched saturated alkane. Cetane ignites with a short delay under compression, and is assigned a cetane number of 100. Alpha-methylnaphthalene, which has a long delay period, was assigned a cetane number of 0, but has been replaced as a reference fuel by 2,3,4,5,6,7,8-heptamethylnonane, which is assigned a cetane number of 15. [2] All other hydrocarbons in diesel fuel are indexed to cetane as to how rapidly they ignite under compression, i.e. diesel engine conditions. Since hundreds of components comprise diesel fuel, the overall cetane number of that fuel is the average cetane quality of all the components. High-cetane components have a disproportionate influence, hence the use of high-cetane additives.

Measuring cetane number

Cetane numbers are rather difficult to measure accurately, as it requires a special diesel engine called a Cooperative Fuel Research (CFR) engine. Under standard test conditions, the operator of the CFR engine uses a manual-wheel to increase the compression ratio (and therefore the peak pressure within the cylinder) of the engine until the time between fuel injection and ignition is 2.407 ms. The resulting cetane number is then calculated by determining which mixture of cetane (hexadecane) and isocetane (2,2,4,4,6,8,8-heptamethylnonane) will result in the same ignition delay.

Ignition Quality Tester (IQT)

Another reliable method of measuring the derived cetane number (DCN) of diesel fuel is the Ignition Quality Tester (IQT). This instrument applies a simpler, more robust approach to CN measurement than the CFR. Fuel is injected into a constant volume combustion chamber at approximately 575 °C and 310 psi (21 bar). The time between the start of injection and the recovery of the combustion chamber pressure to 310 psi (21 bar) is defined as the ignition delay. This measured ignition delay is then used to calculate the DCN of the fuel. The fuel's DCN is then calculated using an empirical inverse relationship to ignition delay. Because of the reproducibility, material cost, and speed of the IQT, this has been the definitive source for DCN measurements of fuels since the late 2000s. [14] [15] [16]

Fuel ignition tester

Another reliable method of measuring the derived cetane number of diesel fuel is the Fuel Ignition Tester (FIT). This instrument applies a simpler, more robust approach to CN measurement than the CFR. Fuel is injected into a constant volume combustion chamber in which the ambient temperature is approximately 575 °C. The fuel combusts, and the high rate of pressure change within the chamber defines the start of combustion. The ignition delay of the fuel can then be calculated as the time elapsed between the start of fuel injection and the start of combustion. The fuel's derived cetane number can then be calculated using an empirical inverse relationship to ignition delay.

Cetane index

Another statistic used by fuel-users to control quality is the cetane index (CI), which is a calculated number based on the density and a distillation range of the fuel. There are various versions of this, depending on whether metric or Imperial units are used, and the number of distillation points that are used. These days most oil companies use the '4-point method', ASTM D4737, based on density and 10% 50% and 90% recovery temperatures. The '2-point method' is defined in ASTM D976 and uses just density and the 50% recovery temperature. This 2-point method tends to overestimate the cetane index and is not recommended. Cetane index calculations cannot account for cetane improver additives and therefore do not measure the total cetane number for additized diesel fuels. Diesel engine operation is primarily related to the actual cetane number, and the cetane index is merely an estimation of the base (unadditized)[ clarification needed ] cetane number.

Industry standards

The industry standards for measuring cetane number are ASTM D613 (ISO 5165) for the CFR engine, D6890 for the IQT, and D7170 for the FIT.

See also

Related Research Articles

<span class="mw-page-title-main">Diesel fuel</span> Liquid fuel used in diesel engines

Diesel fuel, also called diesel oil or historically heavy oil, is any liquid fuel specifically designed for use in a diesel engine, a type of internal combustion engine in which fuel ignition takes place without a spark as a result of compression of the inlet air and then injection of fuel. Therefore, diesel fuel needs good compression ignition characteristics.

An octane rating, or octane number, is a standard measure of a fuel's ability to withstand compression in an internal combustion engine without undergoing pre-ignition. The higher the octane number, the more compression the fuel can withstand before detonating. Octane rating does not relate directly to the power output or the energy content of the fuel per unit mass or volume, but simply indicates gasoline's resistance to detonating under pressure without a spark.

<span class="mw-page-title-main">Biodiesel</span> Fuel made from vegetable oils or animal fats

Biodiesel is a renewable biofuel, a form of diesel fuel, derived from biological sources like vegetable oils, animal fats, or recycled greases, and consisting of long-chain fatty acid esters. It is typically made from fats.

<span class="mw-page-title-main">Flash point</span> Lowest temperature at which a volatile materials vapors ignite if given a source

The flash point of a material is the "lowest liquid temperature at which, under certain standardized conditions, a liquid gives off vapours in a quantity such as to be capable of forming an ignitable vapour/air mixture".

<span class="mw-page-title-main">Liquid fuel</span> Liquids that can be used to create energy

Liquid fuels are combustible or energy-generating molecules that can be harnessed to create mechanical energy, usually producing kinetic energy; they also must take the shape of their container. It is the fumes of liquid fuels that are flammable instead of the fluid. Most liquid fuels in widespread use are derived from fossil fuels; however, there are several types, such as hydrogen fuel, ethanol, and biodiesel, which are also categorized as a liquid fuel. Many liquid fuels play a primary role in transportation and the economy.

Shell V-Power is the brand name given to Shell's enhanced high specification fuels for road motor vehicles including Shell V-Power Nitro+ and Shell V-Power Diesel. Introduced in Italy in 2001, Shell relaunched the fuel in March 2008, under the name Nitrogen-Enriched Shell V-Power, with nitrogen-containing detergents.

JP-8, or JP8, is a jet fuel, specified and used widely by the US military. It is specified by MIL-DTL-83133 and British Defence Standard 91-87, and similar to commercial aviation's Jet A-1, but with the addition of corrosion inhibitor and anti-icing additives.

Vegetable oil can be used as an alternative fuel in diesel engines and in heating oil burners. When vegetable oil is used directly as a fuel, in either modified or unmodified equipment, it is referred to as straight vegetable oil (SVO) or pure plant oil (PPO). Conventional diesel engines can be modified to help ensure that the viscosity of the vegetable oil is low enough to allow proper atomization of the fuel. This prevents incomplete combustion, which would damage the engine by causing a build-up of carbon. Straight vegetable oil can also be blended with conventional diesel or processed into biodiesel, HVO or bioliquids for use under a wider range of conditions.

Neste MY Renewable Diesel is a vegetable oil refining fuel production process commercialized by the Finnish oil and refining company Neste. Whether as an admixture or in its pure form, Neste MY Renewable Diesel is able to supplement or partially replace diesel fuel without problems. Neste MY Renewable Diesel guarantees that every gallon sold meets ASTM D975 and EN 15940 specifications in compliance with OEM standards.

The Calculated Ignition Index (CII) is an index of the ignition quality of residual fuel oil. It is used to determine the suitability of heavy fuel oil for (marine) engines.

Isocetane (2,2,4,4,6,8,8-heptamethylnonane) is a highly branched alkane used as a reference in determining the cetane number of diesel. It has a cetane number of 15. Isocetane replaced 1-methylnaphthalene in 1962 as the lower reference for cetane number owing to the oxidation instability and difficulty of use of 1-methylnaphthalene in the reference engine.

Cetane index is used as a substitute for the cetane number of diesel fuel. The cetane index is calculated based on the fuel's density and distillation range. There are two methods used, ASTM D976 and D4737. The older D976, or "two-variable equation" is outdated and should no longer be used for cetane number estimation. It is, however, still required by the United States Environmental Protection Agency (EPA) as an alternative method for satisfying its aromaticity requirement for diesel fuel. D4737 is the newest method and is sometimes referred to as "the four-variable equation". D4737 is the same method as ISO 4264. Cetane index in some crude oil assays is often referred to as Cetane calcule, while the cetane number is referred to as Cetane measure.

Hydrotreated vegetable oil (HVO) is a biofuel made by the hydrocracking or hydrogenation of vegetable oil. Hydrocracking breaks big molecules into smaller ones using hydrogen while hydrogenation adds hydrogen to molecules. These methods can be used to create substitutes for gasoline, diesel, propane, kerosene and other chemical feedstock. Diesel fuel produced from these sources is known as green diesel or renewable diesel.

Crankcase dilution is a phenomenon of internal combustion engines in which unburned diesel or gasoline accumulates in the crankcase. Excessively rich fuel mixture or incomplete combustion allows a certain amount of fuel to pass down between the pistons and cylinder walls and dilute the engine oil. It is more common in situations where fuel is injected at a very high pressure, such as in a direct-injected diesel engine.

LS-9 Inc was a venture-funded company focused on producing diesel fuel from transgenic organisms. It launched in 2005, took in $81 million in investment, and in 2013 was sold to Renewable Energy Group for $40 million in cash and stock, and an additional $21.5 million if technology and production milestones were met.

<span class="mw-page-title-main">Carbureted compression ignition model engine</span> Type of carbureted engine

A carbureted compression ignition model engine, popularly known as a model diesel engine, is a simple compression ignition engine made for model propulsion, usually model aircraft but also model boats. These are quite similar to the typical glow-plug engine that runs on a mixture of methanol-based fuels with a hot wire filament to provide ignition. Despite their name, their use of compression ignition, and the use of a kerosene fuel that is similar to diesel, model diesels share very little with full-size diesel engines.

Internal combustion engines come in a wide variety of types, but have certain family resemblances, and thus share many common types of components.

<span class="mw-page-title-main">Internal combustion engine</span> Engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber

An internal combustion engine is a heat engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is typically applied to pistons, turbine blades, a rotor, or a nozzle. This force moves the component over a distance, transforming chemical energy into kinetic energy which is used to propel, move or power whatever the engine is attached to.

A cetane improver [′sē‚tān im′prüv·ər] is a chemical which has the effect of increasing a diesel fuel's cetane number. A few examples are nitrates, nitroalkanes, nitrocarbonates and peroxides.

Partially premixed combustion (PPC), also known as PPCI or GDCI is a modern combustion process intended to be used in internal combustion engines of automobiles and other motorized vehicles in the future. Its high specific power, high fuel efficiency and low exhaust pollution have made it a promising technology. As a compression-ignition engine, the fuel mixture ignites due to the increase in temperature that occurs with compression rather than a spark from a spark plug. A PPC engine injects and premixes a charge during the compression stroke. This premixed charge is too lean to ignite during the compression stroke – the charge will ignite after the last fuel injection ends near TDC. The fuel efficiency and working principle of a PPC engine resemble those of Diesel engine, but the PPC engine can be run with a variety of fuels. Also, the partially premixed charge burns clean. Challenges with using gasoline in a PPC engine arise due to the low lubricity of gasoline and the low cetane value of gasoline. Use of fuel additives or gasoline-diesel or gasoline-biodiesel blends can mitigate the various problems with gasoline.

References

  1. ↑ Werner Dabelstein, Arno Reglitzky, Andrea Schütze and Klaus Reders "Automotive Fuels" in Ullmann's Encyclopedia of Industrial Chemistry, 2007, Wiley-VCH, Weinheim. doi : 10.1002/14356007.a16_719.pub2
  2. 1 2 3 Speight, James G. (2014-12-12). Handbook of Petroleum Product Analysis: Speight/Handbook of Petroleum Product Analysis. Hoboken, NJ: John Wiley & Sons, Inc. doi:10.1002/9781118986370. ISBN   978-1-118-98637-0.
  3. ↑ bosch.de (German) Archived December 24, 2007, at the Wayback Machine
  4. ↑ "St1 Diesel plus -20 °C Product Data Sheet" (PDF). 2018-03-15.
  5. ↑ "Shell Diesel Summer -20 °C Product Data Sheet" (PDF). 2018-03-15. Archived from the original (PDF) on 2020-01-03. Retrieved 2020-01-03.
  6. ↑ "NEOT DIESEL -10/-20, NEOT DIESEL -10/-20 Premium Smart Diesel Data Sheet" (PDF). 2018-03-15.
  7. ↑ "Neste MY Renewable Diesel Product Data Sheet" (PDF). 2019-01-01.
  8. ↑ "Specs table" (PDF). www.arb.ca.gov. Archived from the original (PDF) on 2017-02-21. Retrieved 2013-06-08.
  9. ↑ "Texas Low Emission Diesel (TxLED) Program". TCEQ.
  10. ↑ "The Advantages of Neste MY Renewable Diesel (HVO or R99 Diesel)". Neste in North America. 2022-07-22. Retrieved 2023-10-16.
  11. ↑ dorfketal.com Archived August 8, 2007, at the Wayback Machine
  12. ↑ "404 Error - Biodiesel.org" (PDF). www.biodiesel.org. Archived from the original (PDF) on 2007-07-14. Retrieved 2008-09-13.{{cite web}}: Cite uses generic title (help)
  13. ↑ Olah, G.A.; Goeppert, A.; Prakash, G.K. (2006). "11". Beyond Oil and Gas: The Methanol Economy .
  14. ↑ Heyne, Kirby, Boehman, Energy & Fuels, 2009. doi : 10.1021/ef900715m
  15. ↑ Dooley, Stephen; Hee Won, Sang; Heyne, Joshua; Farouk, Tanvir I.; Ju, Yiguang; Dryer, Frederick L.; Kumar, Kamal; Hui, Xin; Sung, Chih-Jen; Wang, Haowei; Oehlschlaeger, Matthew A.; Iyer, Venkatesh; Iyer, Suresh; Litzinger, Thomas A.; Santoro, Robert J.; Malewicki, Tomasz; Brezinsky, Kenneth (2012). "The experimental evaluation of a methodology for surrogate fuel formulation to emulate gas phase combustion kinetic phenomena". Combustion and Flame. 159 (4): 1444–1466. doi:10.1016/j.combustflame.2011.11.002.
  16. ↑ Dooley, Stephen; Hee Won, Sang; Chaos, Marcos; Heyne, Joshua; Ju, Yiguang; Dryer, Frederick L.; Kumar, Kamal; Sung, Chih-Jen; Wang, Haowei; Oehlschlaeger, Matthew A.; Santoro, Robert J.; Litzinger, Thomas A. (2010). "A jet fuel surrogate formulated by real fuel properties". Combustion and Flame. 157 (12): 2333–2339. doi:10.1016/j.combustflame.2010.07.001.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.