Clinton Railroad Bridge

Last updated

Clinton Railroad Bridge
Clinton Railroad Bridge 01 (cropped).jpg
The Clinton Railroad Bridge in 2018
Coordinates 41°50′11″N90°11′05″W / 41.83639°N 90.18472°W / 41.83639; -90.18472
CarriesDouble railroad track
Crosses Mississippi River
Locale Clinton, Iowa, and Fulton, Illinois
Owner Union Pacific Railroad
Characteristics
Design Swing bridge
Total length855 m (2,805 ft)
Longest span460 m (1,509 ft)
Rail characteristics
No. of tracks 2
History
Constructed by Pennsylvania Steel Company
Construction start1901
Construction end1907 [1]
Construction cost$1 million [2]
Opened1909
Statistics
Daily traffic 42.9 trains per day (as of 2014) [3]
Location
Clinton Railroad Bridge

The Clinton Railroad Bridge, also called the Chicago and Northwestern Railway Bridge or more simply the Clinton Bridge, [1] is a bridge that carries double tracked rail lines across the Mississippi River between Clinton, Iowa, and Fulton (Albany), Illinois. The bridge is a truss bridge with a swing span crossing the main river channel and is adjacent to the Gateway Bridge. The original bridge was constructed in 1858, and the first train crossed the bridge on January 19, 1860. The bridge was the second railroad crossing over the Mississippi River. In 1870, the bridge was declared a post route, therefore stopping the occupation of steamboats and approval of railroads. From 1859 to 1908, the mileage in operation increased from 28,789 to 229,230, prompting the Chicago and North Western Railway to replace the bridge with a new structure in 1900.

Contents

The current bridge was built by the Pennsylvania Steel Company. Construction of the new bridge was planned in 1901, and on February 7, 1907, Congress authorized its construction. Construction of the bridge ended in 1907, and the bridge opened in 1909. During that year, the first train crossed the new bridge, and the old bridge was taken down. There are still piers from predecessor bridges next to the current bridge. Through its purchase of Chicago and North Western Railway in 1995, Union Pacific Railroad is the current owner of the bridge. There are possibilities that the current bridge would be replaced. The bridge was listed as “hazard to navigation” by United States Coast Guard in 1996 and by the Iowa Department of Transportation in 2009. In preparation of a replacement bridge, a new depot was purchased in 2017 and new land were purchased in 2018. During December 2020, the Illinois Department of Resources gave notice that a new bridge was planned to begin construction in 2021 with demolition of the existing one to occur in 2025.

Description

The swing span of the Clinton Railroad Bridge in 2018. Clinton Railroad Bridge 05.jpg
The swing span of the Clinton Railroad Bridge in 2018.

The Clinton Railroad Bridge is a two-tracked swing Parker truss bridge with a 460-foot (140 m) swing span and an overall length of 855 m (2,805 ft). This bridge contains four spans: a swing span, a deck girder span, a Parker through truss span, and a quadrangular truss span. The bridge's vertical clearance is 18.7 ft (5.7 m), [4] and has estimate of 15 m (49 ft) above ground. At the end of the swing span is a Warren-style truss configuration, and the tower portion of the bridge has a very narrow appearance.

History

Original bridge (1864–1909)

Planning

In 1835, a former riverboat pilot, Elijah Buell, along with his business partner, John Baker, located a ferry service at a place north of the current bridge location called "the Narrows." [5] Baker established himself on the Illinois side of the river, and Buell settled on the Iowa side. Baker's settlement eventually became the City of Fulton, Illinois. Buell's settlement was chartered by Buell and three partners (George Harlan, Dennis Warren, and Chalkey Hoag) in 1837 as Lyons, Iowa, named for the city of the same name in France. Because of the popularity of the river ferry, both Fulton and Lyons grew very rapidly. [6]

In 1852, citizens of Lyons learnt that a new railroad would be built westward of Iowa, which led to possibilities of a Mississippi River railroad crossing between Lyons and Fulton. [7] The Iowa Land Company was organized in 1855 with the announcement that a railroad crossing was to be attempted south of Lyons and Fulton. The land company bought Bartlett's holdings on the Iowa side of the river and re-platted them under the name Clinton, Iowa, in honor of the Governor of New York, DeWitt Clinton. [8] The Chicago, Iowa, and Nebraska (C&IN) Railroad Company was formed to effect the railroad crossing at Little Rock Island, between the new city of Clinton and the village of Albany, Illinois. [8] However, C&IN went bankrupt in 1862, and was later purchased by the Cedar Rapids and Missouri River Railroad. [9]

Construction

Stereoscope of the old bridge Clinton Bridge, draw closed, by J. Blackhall.png
Stereoscope of the old bridge

In 1858, Chicago, Iowa & Nebraska Railroad began construction of the bridge. [10] On January 15, 1859, the first piers for the bridge was driven and on December 14 that year, the last span was dropped. [11] The first railroad bridge at Clinton was declared open for operation at noon on January 19, 1860, as the first train crossed the bridge. It would be the second railway crossing over the entire Mississippi River. However, the entire span was not yet complete, and railway cars had to be ferried across the main channel of the river between Little Rock Island and the Iowa shoreline. [8]

The final segment of the original span was completed in 1864, the same year that the C&IN merged with the Galena & Chicago Union Railroad to form the Chicago and North Western (C&NW) Railroad. [12] This company operated the bridge, and its successor, the current bridge, constructed in 1907, until the Union Pacific Railway Company purchased the C&NW in 1995. [13] The bridge was completed on January 6, 1865, and the first Chicago freight train crossed it six days later. The bridge's total length was 3,750 ft (1,143 m), [14] and its draw span was 300 ft (91 m) long. [15]

From the beginning of its construction, the Clinton Railroad Bridge was the subject of several lawsuits brought by river steamboat operators. In 1870, a third lawsuit was settled by the United States Supreme Court in favor of the railroad. [16] The bridge was declared a post route, therefore stopping the occupation of steamboats and approval of railroads. The mileage in operation increased from 28,789 in 1859 to 229,230 in 1908, with more than 150 trains using the bridge on some days, prompted the Chicago and North Western Railroad to replace the bridge with a new structure in 1900. [10] The old bridge was torn down in 1909. [2]

Current bridge (1907–present)

Planning for construction on the new bridge began in 1901. [17] On February 6, 1907, Congress authorized construction of the new bridge. On May 4 of that year, the secretary of war approved plans for it. During the time of construction, the draw span was one of the largest spans on the Mississippi Rver. [17] On March 21, 1907, a formal order authorized the necessary expenditures for the bridge. On May 18, 1907, a contract for the entire sub-structure was entered, which was made for erection of the slough spans and east channel spans. In February 1908, a contract for constructing the west channel spans was made. [18] The new bridge opened in 1909, and in late winter during that year, the first train crossed the bridge. The cost for the new bridge was $1 million. [2]

In October 1958, [19] the bridge caught on fire and suffered $250,000 in loss. In June 1959, the bridge suffered another fire, but the damage was slight. The cause of the blaze was not determined, but firefighters said that 25 ties were damaged by heat and would need to be replaced. [20] On August 7, 2007, eleven coal cars derailed on the bridge. The train was traveling from Wyoming to Illinois. The bridge reopened on Wednesday August 8, 2007. [21]

Future replacement

There has been possibilities that the current Clinton Railroad Bridge may be replaced. In 1996, the United States Coast Guard listed the bridge as a "hazard to navigation", and this declaration helped put the bridge on track for replacement once federal funds would be available to do it. [22] During that year, the Coast Guard issued an order to "alter the bridge" to the Union Pacific and cited it as an "unreasonable obstruction to navigation". [1] In a 2009 report, the Iowa Department of Transportation described the bridge as a "persistent hazard to navigation that causes a significant loss of America's economic competitiveness due to delays it creates". [23] In 2013, Union Pacific planned to build a new $400 million span bridge to replace the current one. [24] In 2017, Union Pacific purchased a depot in preparation for a new railroad bridge. [25] In 2018, Union Pacific purchased new land near the Garden Plain Township in Illinois. [26]

See also

Related Research Articles

<span class="mw-page-title-main">Swing bridge</span> Bridge which pivots around the mid-point

A swing bridge is a movable bridge that has as its primary structural support a vertical locating pin and support ring, usually at or near to its center of gravity, about which the swing span can then pivot horizontally as shown in the animated illustration to the right. Small swing bridges as found over canals may be pivoted only at one end, opening as would a gate, but require substantial underground structure to support the pivot.

<span class="mw-page-title-main">BNSF Railway Bridge 5.1</span> Railroad bridge in Portland, Oregon

The BNSF Railway Bridge 5.1, also known as the St. Johns Railroad Bridge or the Willamette River Railroad Bridge, is a through truss railway bridge with a vertical lift that spans the Willamette River in Portland, Oregon, United States. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was originally a swing-span bridge, and its swing-span section was the longest in the world at the time. However, 81 years later the main span was converted from a swing-type to a vertical-lift type, in order to widen the navigation channel. The lift span is one of the highest and longest in the world. The bridge consists of five sections, with the two sections closest to the bank on each side fixed.

<span class="mw-page-title-main">Mark Morris Memorial Bridge</span> Bridge in Iowa and Fulton, Illinois

The Mark Morris Memorial Bridge is a 2 lane truss bridge across the Mississippi River in the United States. It connects the cities of Clinton, Iowa and Fulton, Illinois. The bridge may also be known as the Lyons-Fulton Bridge, which was the name of a predecessor bridge and the name listed on the USGS topographical map. The town of Lyons, Iowa, was annexed to Clinton in 1895, but the northern end of the city is still referred to as Lyons. The bridge is the terminus of both Iowa Highway 136 and Illinois Route 136. The 1975 bridge was named in memory Mark Morris, a long time member of the City of Clinton Bridge Commission who died in 1972. Morris was instrumental in the construction of the 1975 bridge and the City of Clinton Bridge Commission named it in his honor.

<span class="mw-page-title-main">Gateway Bridge (Illinois–Iowa)</span> Bridge over the Mississippi River

The Gateway Bridge is a suspension bridge over the Mississippi River in Clinton, Iowa, United States. It carries U.S. Route 30 from Iowa into Illinois just south of Fulton, Illinois. The bridge itself is two travel lanes wide.

<span class="mw-page-title-main">Fort Madison Toll Bridge</span> Bridge in and Niota, Illinois

The Fort Madison Toll Bridge is a tolled, double-decked swinging truss bridge over the Mississippi River that connects Fort Madison, Iowa, and unincorporated Niota, Illinois. A double-track railway occupies the lower deck of the bridge, while two lanes of road traffic are carried on the upper deck. The bridge is about 1 mile (1.6 km) long with a swing span of 525 feet (160 m), and was the longest and largest double-deck swing-span bridge in the world when constructed in 1927. It replaced an inadequate combination roadway/single-track bridge completed in 1887. The main river crossing consists of four 270-foot (82 m) Baltimore through truss spans and a swing span made of two equal arms, 266 feet (81 m) long. In 1999, it was listed in the National Register of Historic Places under the title, Fort Madison Bridge, ID number 99001035. It was also documented as survey number IA-62 by the Historic American Engineering Record, archived at the Library of Congress. Construction and photographic details were recorded at the time in Scientific American magazine.

<span class="mw-page-title-main">Thebes Bridge</span> Railroad bridge across the Mississippi River

The Thebes Bridge is a five span cantilever truss bridge carrying the Union Pacific Railroad across the Mississippi River between Illmo, Missouri and Thebes, Illinois. It is owned by the Southern Illinois and Missouri Bridge Company, now a Union Pacific subsidiary.

<span class="mw-page-title-main">Louisiana Railroad Bridge</span> Bridge in Louisiana, Missouri and Illinois

The Louisiana Railroad Bridge carries a single track rail line across the Mississippi River between Louisiana, Missouri and Pike County, Illinois, United States. Built by the Chicago and Alton Railroad, the structure is currently owned by the Canadian Pacific Kansas City following a series of sales and consolidation in the railroad industry.

<span class="mw-page-title-main">Quincy Rail Bridge</span> Bridge in Missouri and Quincy, Illinois

The Quincy Rail Bridge is a truss bridge that carries a rail line across the Mississippi River between West Quincy, Missouri, and Quincy, Illinois, USA. It was originally constructed in 1868 for the Chicago, Burlington and Quincy Railroad, a predecessor of BNSF Railway.

<span class="mw-page-title-main">Burlington Rail Bridge</span> Historic vertical-lift railroad bridge

The Burlington Bridge is a vertical-lift railroad bridge across the Mississippi River between Burlington, Iowa, and Gulfport, Illinois, United States. It is currently owned by BNSF Railway and carries two tracks which are part of BNSF's Chicago–Denver main line.

<span class="mw-page-title-main">Government Bridge</span> Bridge connecting Rock Island, Illinois and Davenport, Iowa

The Government Bridge or Arsenal Bridge spans the Mississippi River, connecting Rock Island, Illinois and Davenport, Iowa. The Iowa Interstate Railroad uses the upper deck of the bridge for its ex-Chicago and Rock Island Railroad route between Council Bluffs, Iowa and Chicago, Illinois. The lower deck carries automobile traffic between the two cities. It is located near Upper Mississippi Mile Marker 483, adjacent to the Mississippi River Lock and Dam No. 15. The current structure is the fourth at this location. The bridges all were built with a swing section to accommodate traffic navigating the river.

<span class="mw-page-title-main">La Crosse Rail Bridge</span> Bridge in La Crosse, Wisconsin

The La Crosse Rail Bridge is a swing bridge that spans the Mississippi River between La Crescent, Minnesota and La Crosse, Wisconsin. The first bridge in this location initially was designed and ready to build by June 1876, and was completed in November 1876 by the Milwaukee and St. Paul Railway, a predecessor of the Chicago, Milwaukee, St. Paul and Pacific Railroad. It was later replaced in 1902. It is at the Western end of the Canadian Pacific Railway Tomah Subdivision. Amtrak's Empire Builder crosses this bridge.

<span class="mw-page-title-main">Cairo Rail Bridge</span> Bridge in Kentucky and Cairo, Illinois

Cairo Rail Bridge is the name of two bridges crossing the Ohio River near Cairo, Illinois in the United States. The original was an 1889 George S. Morison through-truss and deck truss bridge, replaced by the current bridge in 1952. The second and current bridge is a through-truss bridge that reused many of the original bridge piers. As of 2018, trains like the City of New Orleans travel over the Ohio River supported by the same piers whose construction began in 1887.

<span class="mw-page-title-main">Union Pacific Missouri River Bridge</span> Bridge in and Omaha, Nebraska

The Union Pacific Missouri River Bridge is a rail truss bridge across the Missouri River between Council Bluffs, Iowa, and Omaha, Nebraska.

<span class="mw-page-title-main">Kinzie Street railroad bridge</span> Bridge in Chicago

The Chicago and North Western Railway's Kinzie Street railroad bridge is a single leaf bascule bridge across the north branch of the Chicago River in downtown Chicago, Illinois. At the time of its opening in 1908 it was the world's longest and heaviest bascule bridge. The previous bridges on the same site included a pedestrian span that was the first bridge across the Chicago River; a second bridge that served as Chicago's first railroad bridge; and a third bridge that was one of the first all-steel spans in the United States.

<span class="mw-page-title-main">Illinois Central Missouri River Bridge</span> Bridge in Iowa to Omaha, Nebraska

The Illinois Central Missouri River Bridge, also known as the IC Bridge or the East Omaha Bridge, is a rail through truss double swing bridge across the Missouri River connecting Council Bluffs, Iowa, with Omaha, Nebraska. It is owned by the Canadian National Railway and is closed to all traffic. At 521 feet long, the second version of the bridge was the longest swing bridge in the world from when it was completed in 1903 through 1915. In 1975 it was regarded as the third longest swing bridge.

<span class="mw-page-title-main">Oregon Slough Railroad Bridge</span> Railroad bridge in Portland, Oregon

The Oregon Slough Railroad Bridge, also known as the BNSF Railway Bridge 8.8, is a swing-span, through truss bridge in Portland, Oregon, United States. Currently owned and operated by BNSF Railway, it crosses an anabranch of the Columbia River known as North Portland Harbor and historically as the Oregon Slough. The bridge's northern end is on Hayden Island, which, along with Tomahawk Island, forms the north shore of the channel. Completed in 1908, the two-track bridge is one of only two swing bridges surviving in Portland, which once had several bridges of that type, both for road and rail traffic. The only other remaining swing bridge in the Portland area is another rail-only bridge on the same line, BNSF's nearby Bridge 9.6, spanning the Columbia River.

<span class="mw-page-title-main">Dumbarton Rail Bridge</span> Sole heavy rail-compatible crossing of the San Francisco Bay

The Dumbarton Rail Bridge lies just to the south of the Dumbarton road bridge. Built in 1910, the rail bridge was the first structure to span San Francisco Bay, shortening the rail route between Oakland and San Francisco by 26 miles (42 km). The last freight train traveled over the bridge in 1982, and it has been proposed since 1991 to reactivate passenger train service to relieve traffic on the road bridges, though this would entail a complete replacement of the existing bridge. Part of the western timber trestle approach collapsed in a suspected arson fire in 1998.

The Winona Rail Bridge was a swing bridge that spanned the Mississippi River between Winona, Minnesota, and Winona Junction in Buffalo, Buffalo County, Wisconsin. It was built to link the Winona and St. Peter Railroad with the La Crosse, Trempealeau & Prescott Railroad. Both railroads became part of the Chicago and North Western Transportation Company (C&NW). Parts of the bridge are still visible. The swing span was removed, but the box girder portion of the bridge still extends from Latsch Island just downstream of the current Main Channel Bridge. Piers from the original 1871 bridge and the box girders are in the North Channel just downstream of the current North Channel Bridge.

References

  1. 1 2 3 Dare, Jason. "Owner of Bridge Not Presumed Negligent for Barge Allision". The National Sea Grant Law Center. University of Mississippi. Archived from the original on September 13, 2006. Retrieved August 1, 2008.
  2. 1 2 3 Morse-Kahn, Deborah; Trnka, Joe (2003). "Clinton, Iowa: Railroad Town Paperback – 2003" (PDF). Iowa Department of Transportation . p. 19.
  3. ↑ Missouri Department of Transportation (2017). The Merchants Bridge rehabilitation program (PDF) (Grant application). Figure 10: Rail Traffic Volumes Overlaid with Seismic Hazard, 2014.
  4. ↑ "Drawbridge Upper Mississippi River, Clinton, IA; Repair and Maintenance". Federal Register : 33005. July 1, 2008.
  5. ↑ "THE HERALD'S OPINION: Club organizers keep local history in the headlines". Clinton Herald . August 9, 2019. Archived from the original on August 10, 2019. Retrieved November 10, 2019.
  6. ↑ Herrity, Gary (September 13, 2013). "The Buells Settle Lyons". Clinton Herald.
  7. ↑ Wolfe, Patrick (1911). Wolfe's History of Clinton County, Iowa. Vol. 1. p. 383. ISBN   9780343050641.{{cite book}}: |work= ignored (help)
  8. 1 2 3 "Early Development: 1836–1860". Clinton IAGenWeb Project. Archived from the original on 2019-08-10. Retrieved 2019-11-11.
  9. ↑ Donovan, Frank (2000). Iowa Railroads: The Essays of Frank P. Donovan, Jr. University of Iowa: University of Iowa Press. p. 131. ISBN   0877457239.
  10. 1 2 The School of Mines Quarterly. Vol. 30. 1909. pp. 308–310.
  11. ↑ Wolfe, Patrick (1911). Wolfe's History of Clinton County, Iowa. Vol. 1. p. 124. ISBN   9780343050641.{{cite book}}: |work= ignored (help)
  12. ↑ Lorenzsonn, Axel (September 27, 2010). Steam & Cinders: The Advent of Railroads in Wisconsin. University of Wisconsin–Madison: Wisconsin Historical Society. p. 298. ISBN   9780870204708.
  13. ↑ Feder, Barnaby J. (March 11, 1995). "COMPANY NEWS; Union Pacific to Buy Chicago and North Western". The New York Times . ISSN   0362-4331 . Retrieved April 5, 2015.
  14. ↑ "Completion of Old Clinton Rail Bridge – 1865". Clinton IAGenWeb Project. 1865.
  15. ↑ Adeli, Hojjat, ed. (April 19, 2016). Historic Bridges: Evaluation, Preservation, and Management. CRC Press. pp. 32–33. ISBN   978-1420079968.{{cite book}}: |work= ignored (help)
  16. ↑ "The Clinton Bridge, 77 U.S. 10 Wall. 454 454 (1870)". Supreme Justia. 1850. Archived from the original on 2017-10-25. Retrieved 2019-11-10.
  17. 1 2 Moffitt, Nick (August 31, 2017). "Bridge planning still in initial steps". Clinton Herald. Archived from the original on October 21, 2018. Retrieved November 24, 2019.
  18. ↑ Engineering News-record. McGraw-Hill. 1909. p. 64.
  19. ↑ Herrity, Gary (May 6, 2011). "Part 2: Clinton enters modern firefighting times". Clinton Herald.
  20. ↑ "Iowa Briefs". The Telegraph-Herald. June 7, 1959. p. 5.
  21. ↑ Martens, Steve (August 7, 2007). "Derailment on Clinton railroad bridge diverts train traffic". Quad-City Times. Archived from the original on November 12, 2019. Retrieved November 14, 2019.
  22. ↑ Bielema, Charlene (March 11, 2011). "Repairs possible for bridge". Clinton Herald. Archived from the original on November 23, 2019. Retrieved November 23, 2019.
  23. ↑ "Iowa Railroad System Plan" (PDF). Archived (PDF) from the original on 2018-04-13. Retrieved 2019-11-12.
  24. ↑ Dahlstrom, Katie (April 4, 2013). "UP eyes South Clinton land". The Clinton Herald. Archived from the original on November 12, 2019. Retrieved November 12, 2019.
  25. ↑ Moffitt, Nick (May 23, 2017). "Former depot sold to Union Pacific". The Clinton Herald. Archived from the original on November 12, 2019. Retrieved November 12, 2019.
  26. ↑ Hartman, Phillip (April 8, 2018). "Railroad buys land near Fulton for future bridge replacement". saukvalley.com. Archived from the original on November 12, 2019. Retrieved November 12, 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.