Cook Inlet Basin

Last updated

The Cook Inlet Basin is a northeast-trending collisional forearc basin that stretches from the Gulf of Alaska into South central Alaska, just east of the Matanuska Valley. It is located in the arc-trench gap between the Alaska-Aleutian Range batholith and contains roughly 80,000 cubic miles of sedimentary rocks. [1] These sediments are mainly derived from Triassic, Jurassic and Cretaceous sediments.

Contents

The Cook Inlet Basin The Cook Inlet Basin Location.jpg
The Cook Inlet Basin

The region is heavily influenced by two major tectonic elements which are still active in the area today. The western side of the basin lies directly above the Aleutian subduction zone where the Pacific Plate is subducting beneath the North American Plate. However the eastern side of the basin overlays the subduction of the Yakutat microplate beneath the North American plate. Active subduction along various sides of the basin produce regional compression that lead to major folding, faulting and the formation of anticline structures within the sediments. Anticline structures provide ideal hydrocarbon traps, and so the Cook Inlet Basin is widely known for its hydrocarbon accumulations and its overall production of oil and gas. [1]

Regional tectonism

The geology of Alaska is characterized by the collision and accretion of terranes over the last 100 Ma and its features formed as a response to plate convergence and subduction. [2]

Pacific Plate megathrust

This Image shows where the Yakutat microplate is subducting beneath the North American Plate. Red indicates the region where the microplate has already been subducted, while the yellow indicates where it is still present at the surface. Yakutat Subduction.gif
This Image shows where the Yakutat microplate is subducting beneath the North American Plate. Red indicates the region where the microplate has already been subducted, while the yellow indicates where it is still present at the surface.

Alaskan tectonism is mainly dominated by the subduction of the Pacific Plate beneath the North American Plate. The subduction boundary is marked by a 4,000 km long trench known as the Aleutian Trench, [2] where seismic activity is common and the volcanic arc produced is part of the Pacific Ring of Fire. The initial subduction of the Pacific Plate triggered the formation of the Bruin Bay Fault system, which is responsible for northeast trending faults throughout the western portion of the Cook Inlet Basin. Thrust type shearing is present along this active margin and it causes the sediments to form anticline structures as a response to regional compression.

Yakutat Microplate

The collision of the Yakutat microplate and the Alaskan superterrane is believed to have happened sometime during the Miocene epoch, after the subduction of the Pacific Plate had already begun. The Yakutat microplate is characterized by a basement of oceanic crust overlain by continental crust. [3] Throughout the basin, Tertiary non-marine stratigraphy have been deformed into northeast-trending, discontinuous folds which partially extend into Mesozoic strata. [1] The ongoing collision is causing the forarc region to collapse into itself, similar to the way a zipper collapses into itself when being zipped shut. This collision is also causing the buildup of an accretionary prism known as the Kenai Mountains, which borders the southeast region of the Cook Inlet basin.

Structural cross section

Generalized Cross section of the foreland basin of the Cook Inlet Basin, Alaska Cook Inlet Basin Alaska.jpg
Generalized Cross section of the foreland basin of the Cook Inlet Basin, Alaska

Major faults

Bruin bay Fault System

Cook Inlet Major Fault Systems, Modified After Bruhn et al. 2006 Cook Inlet Major Fault Systems.jpg
Cook Inlet Major Fault Systems, Modified After Bruhn et al. 2006

The Bruin Bay fault system is system of steeply dipping, northeast-striking faults which extend roughly 498 km along the western region of the basin. It extends from the south of Becharof Lake on the Alaskan Peninsula up to its termination point against the Castle-Mountain Lake fault system. [3] The system separates Mesozoic and Cenozoic volcanic sediments and Upper Triassic and Lower Jurassic volcanic rocks of the arc from Mesozoic marine and non-marine strata within the forearc basin. [4] Faults within the system are generally high angle and westward dipping, but due to the accumulation of sediments on the surface over time, the Burin Bay Fault system is present predominantly within the subsurface. The fault system was believed to have been active during Naknek deposition, and intrusive volcanic plutons indicate fault activity occurring before the Oligocene epoch. [5]

Border Ranges Fault System

The Border Ranges Fault system is a normal-oblique fault and stretches 1,500 mi on the eastern side of the basin. It separates the forearc basin from the subduction complex as well as deformed metamorphic rocks from the subduction complex. [4] The Fault system originated during the pre-miocene period as a result of megathrust subduction and it was subsequently filled with turbidity deposits. Since then, it underwent contractional deformation in the Cretaceous and Paleocene-Eocene due to strike-slip movements. [1]

Castle Mountain Fault System

This system of northeast striking faults extends roughly 200 km long and is the only fault in the region with Holocene faulting present at the surface. [5] Motion along this fault dates as far back as 47 Million years ago and was supposedly active during the Jurassic Period, where it experienced right lateral strike-slip motion. It is still partially active today. [6]

Stratigraphy

Generalized Stratigraphic Column of the Cook Inlet Basin, Alaska Generalized Stratigraphic Column of the Cook Inlet Basin, Alaska.png
Generalized Stratigraphic Column of the Cook Inlet Basin, Alaska

Depositional history

Late Triassic and Early Jurassic (237 Ma–174 Ma)

The Upper Triassic lithology, known as the Kamishak Formation, and the Lower Jurassic lithology, known as the Talkeetna Formation, are both part of an oceanic island arc. [6] These formations are present along the East-West margin of the Bruin Bay Fault zone and are intruded by igneous plutons originating from dehydration melt produced by Pacific Plate subduction. The Kamishak Formation is reflective of a shallow reef environment that graded into deeper marine sediments that were deposited during a transgressive ocean sequence. During the late Triassic, the pacific plate was subducting beneath the North American Plate causing plutons, dikes and sills to intrude into the country rock, especially near the Burin Bay Fault zone. Triassic sediments within the Kamishak sit atop a 7775 ft layer of Permian volcanic rocks. [7]

The Jurassic Talkeetna formation sits unconformably on top of the Kamishak formation, although some disconformities are seen throughout the peninsula. [1] The Talkeetna is composed mostly of volcanic material interbedded with characteristic lava flows and tuffs. Geochemical analysis of the lava flows indicate the formation was once at great depths within the ocean. The formation records periods of shallow, intermediate and deep crustal levels originating in an oceanic island arc environment. [8]

Middle and Upper Jurassic (174 Ma–145 Ma)

During the middle to late Jurassic, an amalgamated superterrane of Tertiary, Quaternary and Mesozoic sediments collided into the continental margin of Alaska. [8] The collision caused the shallow crust to be uplifted and eroded causing the exposure of igneous dike intrusions. The stratigraphy of this time period records the synorogenic sedimentation of marine Jurassic and Cretaceous sandstone, shale and limestone. Three major unconformities are present, the lower Tuxendi Group, the upper Tuxedni Group and the Naknek Formation. [1]

The lower Texendi Group

The Lower Tuxendi Group is composed of deep water marine sediments that indicate two instances of a transgressive and regressive oceanic sequences. Between each sequence the grading of the sediments reflect a deltaic environment. [1]

Upper Tuxedni Group

The Upper Tuxendi Group is comparable to the lower Tuxendi Group in that it reflects a marine environment consistent with deltaic facies. There are also interbedded deposits of shale, siltstone, sandstone and conglomerates. [9] However, this marine sequence is not see throughout the group. Nonmarine debris flows are also present but they eventually grade into sandy marine deposits that reflect a high energy marine environment. [1]

Naknek Formation

The Naknek Formation is a notably thick stratigraphic unit(up to 10,000 ft), but its thickness is non uniform throughout the Alaskan Peninsula. The lithologies display dramatic facies changes from large sediments (cobbles, boulders) to bioturbated sandstones which contain an abundant amount of fossils. [1]

Cretaceous

Major faults

Bruin Bay Fault System

The Bruin Bay fault system is system of steeply dipping, northeast-striking faults which extend roughly 498 km along the western region of the basin. It extends from the south of Becharof Lake on the Alaskan Peninsula up to its termination point against the Castle-Mountain Lake fault system. [3] The system separates Mesozoic and Cenozoic volcanic sediments and Upper Triassic and Lower Jurassic volcanic rocks of the arc from Mesozoic marine and non-marine strata within the forearc basin . Faults within the system are generally high angle and westward dipping, but due to the accumulation of sediments on the surface over time, the Burin Bay Fault system is present predominantly within the subsurface. [1] The fault system was believed to have been active during Naknek deposition, and intrusive volcanic plutons indicate fault activity occurring before the Oligocene epoch. [9]

Tertiary (65 Ma–2 Ma)

West Foreland Formation

The sediments within the West Foreland Formation are mainly derived from eroded Mesozoic and early Tertiary Rocks. They were deposited by streams and currents carry sediments in a shallow estuarine environment. Additionally, there are interbedded layers of siltstone, sandstone, conglomerates and coal beds. [10]

Hemlock Formation

The Hemlock Formation is roughly 600 feet thick and dominated by conglomerate deposits which are consistent with a fluvial-deltaic type of environment. This is a major oil producing reservoir and has produced over 315,000,000 barrels of oil. [10]

Sterling Formation

In the Sterling Formation, there is roughly 10,000 ft of thick sandstone that was deposited in the central and eastern regions of the Cook Inlet Basin during the late Tertiary-early Quaternary period. Regional uplift was occurring during this time, and major sediment sources were derived from the Chugach range and the Alaskan Range. The lower Sterling sandstone's are major gas reservoirs and have produced over 330 billion cubic feet of gas. [10]

Beluga Formation

The Beluga Formation is marked by alternating layers of sand, silt and coal followed by thick sandstone deposits. The sediment source was mainly from channel-sand deposits coming from the North. However, the uplift and erosion of the Chugach range provided the conglomerate sediments to the basin. Over 56 billion cubic feet of gas has been produced here. [10]

Oil and gas production

Annual Alaska South Field production of crude Oil Annual-Alaska-South-Field-Production-of-Crude-Oil-20170327.png
Annual Alaska South Field production of crude Oil
Cook Inlet Oil Fields Cook Inlet Oil Fields.png
Cook Inlet Oil Fields

The Cook Inlet Basin is a major hydrocarbon bearing province that was first discovered in the 1950s. The discovery of oil and gas extends from the Kachemak Bay area north to the mouth of the Susitna River, covering an area of nearly 5,000 square miles. [11]

Middle Ground Shoal (MGS) Oil Field

The Middle Ground Shoal (MGS) oil field was discovered in the upper Cook Inlet in July 1962 with the Shell MGS State No. 1 well, and is considered one of the largest, tightest anticline folds in the Cook Inlet Basin. The field produces oil mainly out of the Tertiary Tyonek Formation, Kenai Group, from a gross interval of 2,800 ft, between depths of 5,100 and 9,700 ft. Additionally, the field contains 31 producing wells, 23 injection wells, 1 shut-in gas well and 8 abandoned wells. As of April, 2022, the MGS produced nearly 204,871,000 barrels of oil. [11] [12]

See also

Related Research Articles

<span class="mw-page-title-main">Los Angeles Basin</span> Sedimentary basin located along the coast of southern California

The Los Angeles Basin is a sedimentary basin located in Southern California, in a region known as the Peninsular Ranges. The basin is also connected to an anomalous group of east-west trending chains of mountains collectively known as the Transverse Ranges. The present basin is a coastal lowland area, whose floor is marked by elongate low ridges and groups of hills that is located on the edge of the Pacific Plate. The Los Angeles Basin, along with the Santa Barbara Channel, the Ventura Basin, the San Fernando Valley, and the San Gabriel Basin, lies within the greater Southern California region. The majority of the jurisdictional land area of the city of Los Angeles physically lies within this basin.

<span class="mw-page-title-main">Geology of the Iberian Peninsula</span> Origins, structure, use and study of the rock formations of Spain, Portugal, Andorra and Gibraltar

The geology of the Iberian Peninsula consists of the study of the rock formations on the Iberian Peninsula, which includes Spain, Portugal, Andorra, and Gibraltar. The peninsula contains rocks from every geological period from the Ediacaran to the Quaternary, and many types of rock are represented. World-class mineral deposits are also found there.

<span class="mw-page-title-main">Accretionary wedge</span> The sediments accreted onto the non-subducting tectonic plate at a convergent plate boundary

An accretionary wedge or accretionary prism forms from sediments accreted onto the non-subducting tectonic plate at a convergent plate boundary. Most of the material in the accretionary wedge consists of marine sediments scraped off from the downgoing slab of oceanic crust, but in some cases the wedge includes the erosional products of volcanic island arcs formed on the overriding plate.

<span class="mw-page-title-main">Geology of the Pyrenees</span> European regional geology

The Pyrenees are a 430-kilometre-long, roughly east–west striking, intracontinental mountain chain that divide France, Spain, and Andorra. The belt has an extended, polycyclic geological evolution dating back to the Precambrian. The chain's present configuration is due to the collision between the microcontinent Iberia and the southwestern promontory of the European Plate. The two continents were approaching each other since the onset of the Upper Cretaceous (Albian/Cenomanian) about 100 million years ago and were consequently colliding during the Paleogene (Eocene/Oligocene) 55 to 25 million years ago. After its uplift, the chain experienced intense erosion and isostatic readjustments. A cross-section through the chain shows an asymmetric flower-like structure with steeper dips on the French side. The Pyrenees are not solely the result of compressional forces, but also show an important sinistral shearing.

Geologically the Australian state of New South Wales consists of seven main regions: Lachlan Fold Belt, the Hunter-Bowen Orogeny or New England Orogen (NEO), the Delamerian Orogeny, the Clarence Moreton Basin, the Great Artesian Basin, the Sydney Basin, and the Murray Basin.

The Antarctic Peninsula, roughly 1,000 kilometres (650 mi) south of South America, is the northernmost portion of the continent of Antarctica. Like the associated Andes, the Antarctic Peninsula is an excellent example of ocean-continent collision resulting in subduction. The peninsula has experienced continuous subduction for over 200 million years, but changes in continental configurations during the amalgamation and breakup of continents have changed the orientation of the peninsula itself, as well as the underlying volcanic rocks associated with the subduction zone.

<span class="mw-page-title-main">Geology of Iran</span>

The main points that are discussed in the geology of Iran include the study of the geological and structural units or zones; stratigraphy; magmatism and igneous rocks; ophiolite series and ultramafic rocks; and orogenic events in Iran.

<span class="mw-page-title-main">Lhasa terrane</span> Fragment of crustal material that forms present-day southern Tibet

The Lhasa terrane is a terrane, or fragment of crustal material, sutured to the Eurasian Plate during the Cretaceous that forms present-day southern Tibet. It takes its name from the city of Lhasa in the Tibet Autonomous Region, China. The northern part may have originated in the East African Orogeny, while the southern part appears to have once been part of Australia. The two parts joined, were later attached to Asia, and then were impacted by the collision of the Indian Plate that formed the Himalayas.

<span class="mw-page-title-main">Aleutian subduction zone</span> Convergence boundary between the North American Plate and the Pacific Plate

The Aleutian subduction zone is a 2,500 mi (4,000 km) long convergent boundary between the North American Plate and the Pacific Plate, that extends from the Alaska Range to the Kamchatka Peninsula. Here, the Pacific Plate is being subducted underneath the North American Plate and the rate of subduction changes from west to east from 7.5 to 5.1 cm per year. The Aleutian subduction zone includes two prominent features, the Aleutian Arc and the Aleutian Trench. The Aleutian Arc was created via volcanic eruptions from dehydration of the subducting slab at ~100 km depth. The Aleutian Trench is a narrow and deep morphology that occurs between the two converging plates as the subducting slab dives beneath the overriding plate.

<span class="mw-page-title-main">Geology of Utah</span>

The geology of Utah, in the western United States, includes rocks formed at the edge of the proto-North American continent during the Precambrian. A shallow marine sedimentary environment covered the region for much of the Paleozoic and Mesozoic, followed by dryland conditions, volcanism, and the formation of the basin and range terrain in the Cenozoic.

The geology of Alaska includes Precambrian igneous and metamorphic rocks formed in offshore terranes and added to the western margin of North America from the Paleozoic through modern times. The region was submerged for much of the Paleozoic and Mesozoic and formed extensive oil and gas reserves due to tectonic activity in the Arctic Ocean. Alaska was largely ice free during the Pleistocene, allowing humans to migrate into the Americas.

<span class="mw-page-title-main">Geology of Nevada</span>

The geology of Nevada began to form in the Proterozoic at the western margin of North America. Terranes accreted to the continent as a marine environment dominated the area through the Paleozoic and Mesozoic periods. Intense volcanism, the horst and graben landscape of the Basin and Range Province originating from the Farallon Plate, and both glaciers and valley lakes have played important roles in the region throughout the past 66 million years.

<span class="mw-page-title-main">Geology of Kyrgyzstan</span>

The geology of Kyrgyzstan began to form during the Proterozoic. The country has experienced long-running uplift events, forming the Tian Shan mountains and large, sediment filled basins.

<span class="mw-page-title-main">Geology of Bulgaria</span>

The geology of Bulgaria consists of two major structural features. The Rhodope Massif in southern Bulgaria is made up of Archean, Proterozoic and Cambrian rocks and is a sub-province of the Thracian-Anatolian polymetallic province. It has dropped down, faulted basins filled with Cenozoic sediments and volcanic rocks. The Moesian Platform to the north extends into Romania and has Paleozoic rocks covered by rocks from the Mesozoic, typically buried by thick Danube River valley Quaternary sediments. In places, the Moesian Platform has small oil and gas fields. Bulgaria is a country in southeastern Europe. It is bordered by Romania to the north, Serbia and North Macedonia to the west, Greece and Turkey to the south, and the Black Sea to the east.

<span class="mw-page-title-main">Geology of Slovakia</span>

The geology of Slovakia is structurally complex, with a highly varied array of mountain ranges and belts largely formed during the Alpine orogeny in Mesozoic and Cenozoic eras and with relicts of older Variscan structures of Paleozoic age. The internal zones of the West Carpathian orogen collapsed during Paleogene forming the Central Carpathian Paleogne Basin and later in Miocene the Pannonian Basin and Carpathian volcanic chain were formed.

The geology of Iraq includes thick sequences of marine and continental sedimentary rocks over poorly understood basement rock, at the junction of the Arabian Plate, the Anatolian Plate, and the Iranian Plate.

The geology of Yukon includes sections of ancient Precambrian Proterozoic rock from the western edge of the proto-North American continent Laurentia, with several different island arc terranes added through the Paleozoic, Mesozoic and Cenozoic, driving volcanism, pluton formation and sedimentation.

<span class="mw-page-title-main">Junggar Basin</span> Sedimentary basin in Xinjiang, China

The Junggar Basin, also known as the Dzungarian Basin or Zungarian Basin, is one of the largest sedimentary basins in Northwest China. It is located in Dzungaria in northern Xinjiang, and enclosed by the Tarbagatai Mountains of Kazakhstan in the northwest, the Altai Mountains of Mongolia in the northeast, and the Heavenly Mountains in the south. The geology of Junggar Basin mainly consists of sedimentary rocks underlain by igneous and metamorphic basement rocks. The basement of the basin was largely formed during the development of the Pangea supercontinent during complex tectonic events from Precambrian to late Paleozoic time. The basin developed as a series of foreland basins – in other words, basins developing immediately in front of growing mountain ranges – from Permian time to the Quaternary period. The basin's preserved sedimentary records show that the climate during the Mesozoic era was marked by a transition from humid to arid conditions as monsoonal climatic effects waned. The Junggar basin is rich in geological resources due to effects of volcanism and sedimentary deposition. According to Guinness World Records it is a land location remotest from open sea with great-circle distance of 2,648 km from the nearest open sea at 46°16′8″N86°40′2″E.

<span class="mw-page-title-main">Geology and geological history of California</span> Description of the geology of California

The geology of California is highly complex, with numerous mountain ranges, substantial faulting and tectonic activity, rich natural resources and a history of both ancient and comparatively recent intense geological activity. The area formed as a series of small island arcs, deep-ocean sediments and mafic oceanic crust accreted to the western edge of North America, producing a series of deep basins and high mountain ranges.

<span class="mw-page-title-main">Ryukyu Arc</span> Island arc between Kyushu and Taiwan

The Ryukyu Arc is an island arc which extends from the south of Kyushu along the Ryukyu Islands to the northeast of Taiwan, spanning about 1,200 kilometres (750 mi). It is located along a section of the convergent plate boundary where the Philippine Sea Plate is subducting northwestward beneath the Eurasian Plate along the Ryukyu Trench. The arc has an overall northeast to southwest trend and is located northwest of the Pacific Ocean and southeast of the East China Sea. It runs parallel to the Okinawa Trough, an active volcanic arc, and the Ryukyu Trench. The Ryukyu Arc, based on its geomorphology, can be segmented from north to south into Northern Ryukyu, Central Ryukyu, and Southern Ryukyu; the Tokara Strait separates Northern Ryukyu and Central Ryukyu at about 130˚E while the Kerama Gap separates Central Ryukyu and Southern Ryukyu at about 127 ˚E. The geological units of the arc include igneous, sedimentary, and metamorphic rocks, ranging from the Paleozoic to Cenozoic in age.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 "AAPG Datapages/Archives".
  2. 1 2 "Alaska: Tectonics and Earthquakes- Incorporated Research Institutions for Seismology". www.iris.edu. Retrieved 2017-04-26.
  3. 1 2 3 Detterman, R.L., T. Hudson, G. Plafker, R.G. Tysdal, and J.M. Hoare, 1976, Reconnaissance geologic map along Bruin Bay and Lake Clark faults in Kenai and Tyonek Quadrangles, Alaska: USG Open-file Map 76-477, scale 1:250,000.
  4. 1 2 Pavlis, T.L., and S.M. Roeske, 2007, The Border Ranges fault system, southern Alaska, in Ridgway, K.D., J.M. Trop, J.M.G. Glen, and J.M. O’Neill, eds., Tectonic growth of a collisional continental margin: Crustal evolution of southern Alaska: GSA Special Paper 431, p. 95–127.
  5. 1 2 Lahr, J. C., Page, R. A., Stephens, C. D., and Fogleman, K. A., 1986, Sutton, Alaska, earthquake of 1984: evidence for activity on the Talkeetna segment of the Castle Mountain fault system: Bulletin of the Seismological Society of America, v. 76, p. 967-983.
  6. 1 2 Clift, P.D., A.E. Draut, P.B. Kelemen, J. Bluzatajn, and A. Greene, 2005a, Stratigraphic and geochemical evolution of an oceanic arc upper crustal section: The Jurassic Talkeetna volcanic formation, south-central Alaska: GSA Bulletin, v. 117, p. 902–925.
  7. Blodgett, R.B., and B. Sralla, 2008, A major unconformity between Permian and Triassic strata at Cape Kekurnoi, Alaska Peninsula; old and new observations on stratigraphy and hydrocarbon potential, in Haeussler, P. J., and Galloway, J. P., eds., Studies by the USGS in Alaska, 2006: USGS Professional Paper 1739-E, 13 p., available at http://pubs.usgs.gov/pp/pp1739/e/.
  8. 1 2 Plafker, G., Gilpin, L.M., and Lahr, J.C., 1994a, Geology of the southern Alaska margin, in Plafker, G., and Berg, H.C., eds., The Geology of Alaska: Boulder, Colorado, Geological Society of America, The Geology of North America, v. G-1, p. 389–449.
  9. 1 2 Detterman, R.L., and B.L. Reed, 1980, Stratigraphy, structure, and economic geology of the Iliamna Quadrangle, Alaska: USGS Bulletin 1368-B, 86 p., scale 1:250,000, 1 plate.
  10. 1 2 3 4 Hartman, D.C (July 1972). "PRELIMINARY REPORT ON STRATIGRAPHY OF KENAl GROUP, UPPER COOK INLET, ALASKA" (PDF).
  11. 1 2 "Location and Extent of Tertiary Structures in Cook Inlet Basin, Alaska, and Mantle Dynamics that Focus Deformation and Subsidence" (PDF).
  12. Boss, R.F.; Lennon, R.B.; Wilson, B.W. (1976). Braunstein, Jules (ed.). Middle Ground Shoal Oil Field, Alaska, in North American Oil and Gas Fields. Tulsa: The American Association of Petroleum Geologists. pp. 1–22. ISBN   0891813004.

59°44′10″N152°23′04″W / 59.7360°N 152.3844°W / 59.7360; -152.3844