Development | |
---|---|
Designer | Robert Dufour and Marius Corbin |
Location | Canada |
Year | 1979 |
No. built | 200 |
Builder(s) | Corbin Les Bateaux |
Role | Cruiser |
Name | Corbin 39 |
Boat | |
Boat weight | 22,800 lb (10,342 kg) |
Draft | 5.50 ft (1.68 m) |
Hull | |
Type | Monohull |
Construction | Fibreglass |
LOA | 41.50 ft (12.65 m) |
LWL | 32.00 ft (9.75 m) |
Beam | 12.08 ft (3.68 m) |
Engine type | Westerbeke 33 hp (25 kW) diesel engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 9,000 lb (4,082 kg) |
Rudder(s) | skeg-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 48.50 ft (14.78 m) |
J foretriangle base | 18.30 ft (5.58 m) |
P mainsail luff | 42.00 ft (12.80 m) |
E mainsail foot | 17.50 ft (5.33 m) |
Sails | |
Sailplan | Cutter rig |
Mainsail area | 367.50 sq ft (34.142 m2) |
Jib/genoa area | 443.78 sq ft (41.229 m2) |
Total sail area | 811.28 sq ft (75.370 m2) |
Racing | |
PHRF | 156 |
The Corbin 39 is a Canadian sailboat that was designed by Robert Dufour and Marius Corbin as a global circumnavigation cruiser and first built in 1979. [1] [2] [3]
The design was based upon a one-off boat that Dufour had built, named Harmonie. [3]
Yacht broker Richard Jordan noted, "the quality reputation of Corbin, and Dufour’s design gives them a cult-like status." [4]
The design was built by Corbin Les Bateaux of Chateauguay, Quebec, Canada, with boats produced in Chateauguay, Napierville and Saint-Paul-de-l'Île-aux-Noix, Quebec. The company built 200 examples of the type between 1979 and 1986, but it is now out of production. Of those built, 185 of the boats were sold unfinished or as kits, for owner completion. The balance, 15 boats, were factory-completed demonstrators, all with different interiors. [1] [4] [2] [5]
A fire at the factory in 1982 resulted in the destruction of the aft cockpit model's deck moulds after boat serial number 129 had been built, so new ones were made with a larger cockpit and higher cabin trunk. A pilothouse was also added to the centre-cockpit model at the same time. The mast was also moved 2.5 ft (76 cm) forward. [3] [6]
The Corbin 39 is a recreational keelboat, built predominantly of fibreglass with either solid fibreglass construction or an optional Airex core and with wooden trim. It has a cutter rig or optional ketch rig with aluminum spars, an aft or centre cockpit, a raked stem, a rounded transom, a skeg-mounted rudder controlled by a wheel and a fixed fin keel. A tall rig was also produced. [1] [2]
The boat has a draft of 5.50 ft (1.68 m) with the standard keel fitted. [1]
The boat is fitted with a Volkswagen Pathfinder or Westerbeke diesel engine of 33 hp (25 kW) or BMW D-35 of 35 hp (26 kW) for docking and manoeuvring. The fuel tank holds 104 U.S. gallons (390 L; 87 imp gal) and the fresh water tank has a capacity of 128 U.S. gallons (480 L; 107 imp gal). [1] [2] [3]
The kit boats were produced at four levels of completion: [4]
Because most boats were owner-completed, interior layouts and rigs vary greatly. A typical layout includes up to seven berths although many boats were equipped for long-term living aboard by a couple. Berths can include an aft double stateroom with its own wash basin, main cabin settee berths and a bow cabin with a double berth to starboard and a settee to port. The galley is located on the port side and includes a three burner stove and an oven. There is a sink with a pressurized water supply. The navigation station is opposite the galley on the starboard side. The head is located aft of the bow cabin on the starboard side and includes a shower. [2]
Ventilation is typically provided by two hatches above the galley, two hatches in the main cabin and one in the bow cabin, plus six dorade vents. [2]
Typically teak trim is used on deck. There is a bow anchor locker, two mast-mounted halyard winches, two cockpit-mounted genoa winches, genoa tracks, a mainsheet traveller and running backstays. [2]
In a review Michael McGoldrick wrote, "the Corbin 39 was the result of an effort to design the ideal boat for serious bluewater cruising. It probably came very close to being exactly that. More so than with most other sailboats, you find the Corbin in the hands of people who have made extensive bluewater passages (or were at least planning on doing so)." [8]
In a 1994 review Richard Sherwood wrote, "the Corbin may be purchased in various stages of completion. Rig may be ketch or cutter, and the cockpit may be aft or amidships for either, although the mizzen will go through the aft cockpit of a ketch. Corbin is pleased that their boat has been termed "overbuilt," as they intend it for cruising." [2]
A 2010 review by yacht broker Richard Jordan indicated, "the work Corbin did do was exceptional. The hulls have an impressive layup schedule of 11 layers of mat and roving with a 16mm Airex core. The deck is a 3/4″ core of marine grade mahogany early on but later Airex foam. The ballast is 9,000 pounds lead encapsulated with extra layers of fiberglass around the keel for protection. Most spars are by Everett Bastet of E.B. Spars Inc. in Quebec. Early one this was a 46′ single spreader main or a 51′ turbo charged double spreader. Later on most had 49′ double spreader rigs. All rigs are deck stepped which may surprise traditionalists. If done right, a deck stepped rig is just as secure as a keel stepped one, and every indication shows that Corbin knew how to engineer a seaworthy sailboat." [4]
A 2011 review in Blue Water Boats, concluded, "Corbins with their fin keel and skeg rudder combination are better sailing than their 26,000 pounds displacement might suggest. They are meant as Marius Corbin writes to take someone, “safely and comfortably around the world…We get postcards from all over the world…what better recommendation is there for a strong and seaworthy vessel.” The cutter rig with a reefed main is a safe and seaworthy combination." [6]
Similar sailboats
The Dickerson 37 is an American sailboat that was designed by George Hazen as a cruiser and first built in 1980.
The Endeavour 37 is an American sailboat that was designed by Dennis Robbins as racer-cruiser and first built in 1977.
The Shannon 38 is an American sailboat that was designed by Walter Shultz, plus George Stadel III and George H. Stadel Jr. of G, H. Stadel & Son as a cruiser and first built in 1975.
The Freedom 39 PH is an American pilothouse schooner sailboat that was designed by Ron Holland and Gary Hoyt as a cruiser and first built in 1983.
The Freedom 39, also called the Freedom 39 Express, is an American sailboat that was designed by Ron Holland and Gary Hoyt as a cruiser and first built in 1983.
The Nautical 39 is an American sailboat that was designed by Charles Morgan and Roger Warren as a cruiser and first built in 1979.
The Baltic 40 is a Finnish sailboat that was designed by Judel/Vrolijk & Co. as an International Offshore Rule racer-cruiser and first built in 1988.
The Islander 40 is an American sailboat that was designed by Doug Peterson as a racer-cruiser and first built in 1979.
The Endeavour 40 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1981.
The Dickerson 41 is an American sailboat that was designed by Ernest Tucker as a cruiser and first built in 1973.
The Nimbus 42 is a Swedish sailboat that was designed by F. Michael Kaufman and Robert Ladd as a cruiser-racer and first built in 1981.
The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.
The Tayana 37 is a Taiwanese sailboat that was designed by Robert Perry as a cruiser and first built in 1976.
The Ericson 25+, also called the Ericson 25 Mark II, is an American trailerable sailboat that was designed by Bruce King as a cruiser and first built in 1978.
The Fisher 25 or Fisher 25 MS is a British trailerable pilothouse sailboat that was designed by Wyatt and Freeman as a cruiser and first built in 1974.
The South Coast 25 is an American trailerable sailboat that was designed by Warren Metcalf as a cruiser and first built in 1969.
The Lancer 45 is an American sailboat that was designed by Herb David as a motorsailer and first built in 1981.
The Matilda 20 is a trailerable sailboat that was designed by Robert Tucker as a daysailer and a cruiser and first built in 1971.
The Nor'Sea 27, or Norsea 27, is an American trailerable sailboat that was designed by Lyle Hess as cruiser and first built in 1976.
The Seafarer 36C is an American sailboat that was designed by Philip Rhodes as a cruiser and first built in 1968. The boat was built with a ketch rig or an optional sloop rig, without the mizzen mast, but with a taller main mast. The design was based on Rhodes Design #702.