Location | |
---|---|
Location | Darlington, United Kingdom |
Coordinates | 54°31′55″N1°32′35″W / 54.5319°N 1.5430°W Coordinates: 54°31′55″N1°32′35″W / 54.5319°N 1.5430°W |
OS grid | NZ295152 |
Characteristics | |
Owner | British Rail |
Depot code |
|
Type | Diesel |
History | |
Opened | 1840s |
Closed | 26 March 1966 (closed to steam) [2] |
Original | Great North of England Railway |
Pre-grouping | North Eastern Railway |
Post-grouping | LNER |
Darlington TMD was a railway traction maintenance depot situated in Darlington, England. The depot code was 51A during the steam era and DN later on. It had several locations. It mainly provided for Teesside freight and local passenger routes to Penrith, Richmond and Saltburn.
The main depot had an 1866 roundhouse, a 9-track 1940 shed [3] and a 1958 diesel depot. [4]
Darlington diesel depot was opened by Richard Nugent, MP on 17 September 1957. It was situated just north of Bank Top station on the east of the main line, and was linked to the main shed on the west by a 6 feet (1.8 m) wide, 250 feet (76 m) long, tubular steel footbridge. It had a 4-car long, 3-road running shed and a heated, enclosed, 4-car long, 2-road repair shop. Concrete frames supported brick walls and a roof with 70% glazing. 27 12 inches (300 mm) extractor fans cleared fumes. Four fuelling points were fed from a 7,000 imp gal (32,000 l; 8,400 US gal) tank. The washing plant had four pairs of rotating rag flails. A 2-storey block provided for 130 staff. Internal walls were of fluted asbestos sheets, aluminium-faced asbestos boards and glass. The brick stores block south of the repair shop had an oil-fired boiler in the basement. [4] [5] Since the 1980s the former site has been planted [6]
There were also three other sheds.
In 1825 a shed served the Stockton and Darlington Railway near North Rd. [3]
Darlington Civic Trust's application [7] to English Heritage to list the derelict shed, between Haughton Road and Dumfries Street, following a developer's request to demolish it, resulted in a Grade II* listing from 9 January 2008. [8] The listing describes a 2-bay red brick shed with stone dressings, corrugated asbestos roof, timber ventilator, a Queen Post Roof and the remains of a fireplace, possibly a small forge. [8]
The Civic Trust said it was built by the Great North of England Railway and dated from 1841, which is when that line opened. [8] However, an alternative view is that it was a two-road engine shed, big enough to house four of the first main line steam engines, built by the Newcastle & Darlington Junction Railway when it opened in 1844. [9] The Tithe map of 1847 confirms the building in this position. [8] The listing notes that the first trains to run on the 1841 line used locomotives borrowed or purchased from the Stockton and Darlington. [8] It also says, The architect is uncertain but it is thought to be George Townsend Andrews of York, architect of the first York Station. While this cannot be confirmed the balance of evidence supports this view as Andrews is confirmed as a prolific designer of very many railway buildings in the area including stations, goods stations and engine sheds during this period including work for the Great North of England Railway. The alternative view is that it was, Designed by George Hudson's friend, George Townsend Andrews. [9] That view is supported by the building being in Andrews' style. [10] It is believed to have been altered or rebuilt in 1854. [9]
An 1861. 4-road, 12-engine shed also survives in Whessoe Rd, designed by William Peachey in the angle between the S&D main line and the track serving North Road Works, into which it was merged. [9]
In 1949 Darlington MPD had 138 locos (including (4 LMS Ivatt Class 2 2-6-0, 1 A2, 17 A5, 14 B1, 2 C7 , 3 G5, 10 J21, 12 J25, 37 J39, 10 J71, 4 J72, 12 J77, 10 J94, 3 L1, 5 N9, Q5, 2 V2)) allocated to it. [2] By 1961 it was down to 68 steam locos (including 2 A3, 9 B1, 15 J94, 11 K1, 1 V2, 12 WD) and 27 diesel shunters. [3]
Darlington had several sub-sheds, some of which had sub-sheds of their own. Darlington's sub-shed was Middleton-in-Teesdale (to 1957)
The British Rail Class 10 diesel locomotive was a variant of the standard Class 08 diesel-electric shunter with a Lister Blackstone diesel engine and General Electric Company plc (GEC) traction motors. The locomotives were built at the BR Works in Darlington and Doncaster over the period 1955–1962, and were withdrawn between February 1967 and June 1972.
The Tanfield Railway is a 4 ft 8+1⁄2 instandard gauge heritage railway in Gateshead and County Durham, England. Running on part of a former horse-drawn colliery wooden waggonway, later rope & horse, lastly rope & loco railway. It operates preserved industrial steam locomotives. The railway operates a passenger service every Sunday, plus other days, as well as occasional demonstration coal, goods and mixed trains. The line runs 3 miles (4.8 km) between a southern terminus at East Tanfield, Durham, to a northern terminus at Sunniside, Gateshead. Another station, Andrews House, is situated near the Marley Hill engine shed. A halt also serves the historic site of the Causey Arch. The railway claims it is "the world's oldest railway" because it runs on a section dating from 1725, other parts being in use since 1621.
The motive power depot (MPD) or locomotive depot, or traction maintenance depot (TMD), is the place where locomotives are usually housed, repaired and maintained when not being used. They were originally known as "running sheds", "engine sheds" or, for short, just sheds. Facilities are provided for refuelling and replenishing water, lubricating oil and grease and, for steam engines, disposal of the ash. There are often workshops for day to day repairs and maintenance, although locomotive building and major overhauls are usually carried out in the locomotive works.
Darlington Works was established in 1863 by the Stockton and Darlington Railway in the town of Darlington in the north east of England. The main part of the works, the North Road Shops was located on the northeast side of the Stockton and Darlington Railway
The Tees Valley Line is a rail route, in Northern England, following part of the original Stockton and Darlington Railway route of 1825. The line covers a distance of 38 miles (61 km), and connects Bishop Auckland to Saltburn via Darlington, Middlesbrough and 14 other stations in the Teesdale.
The North Eastern Railway (NER) Class P3, classified J27 by the LNER, is a class of 0-6-0 steam locomotive. The P3 Class was designed by Wilson Worsdell and was a relatively minor modification of the existing North Eastern Railway Class P2. The most significant change was a deeper firebox with shallower sloping fire grate. This was achieved by raising the boiler slightly, and by reducing the clearance between the firebox and the rear axle. The P3 Class were a freight engine by nature and used for hauling long trains of freight.
Middlesbrough is a railway station on the Durham Coast Line, Esk Valley Line and Tees Valley Line. The station serves the town of Middlesbrough in North Yorkshire, England. It is owned by Network Rail and managed by TransPennine Express.
North Road is a railway station on the Tees Valley Line, which runs between Bishop Auckland and Saltburn via Darlington. The station, situated 1 mile 23 chains (2.1 km) north-west of Darlington, serves the market town of Darlington in County Durham, England. It is owned by Network Rail and managed by Northern Trains.
Laira T&RSMD is a railway traction and rolling stock maintenance depot situated in Plymouth, Devon, England. The depot is operated by Great Western Railway and is mainly concerned with the overhaul and daily servicing of their fleet of High Speed Trains and also the DMUs used on local services. The depot code "LA" is used to identify rolling stock based there.
Immingham engine shed, also known as Immingham depot, or more recently as Immingham TMD and always locally as Loco is a railway maintenance depot located on the Immingham Dock estate, in North East Lincolnshire, England. The depot code is IM.
Gateshead TMD was a railway traction maintenance depot situated in Gateshead, England. The depot code was 52A during the steam era and GD later on.
Thornaby TMD was a railway traction maintenance depot situated in Thornaby, England, latterly operated by DB Schenker. The depot was situated to the east of Thornaby, on the northern side of the line to Middlesbrough.
March TMD was a railway traction maintenance depot situated near March, England. March was a steam locomotive shed under British Railways with the depot code 31B; the depot code of the diesel depot under BR was MR. The nearest railway station is March, and the depot was located close to the Whitemoor Marshalling Yard. Despite its rural location, in the 1970s it accommodated a similar number of locomotives to the comparatively larger Toton TMD and served as the main diesel depot for East Anglia.
There were a number of engine sheds and railway works located in York. The large York North engine shed became the National Railway Museum in 1975.
West Auckland railway station served the villages of St Helen Auckland and West Auckland in County Durham, England, between 1833 and 1962. It was on the railway line between Bishop Auckland and Barnard Castle. There was a locomotive depot, which was the only one to be both closed completely and later reopened by the London and North Eastern Railway.
Broadmeadow Locomotive Depot was a large locomotive depot consisting of two roundhouse buildings and associated facilities constructed by the New South Wales Government Railways adjacent to the marshalling yard on the Main Northern line at Broadmeadow. Construction of the locomotive depot at Broadmeadow commenced in 1923 to replace the existing crowded loco sheds at Woodville Junction at Hamilton, with the depot opening in March 1924. It was added to the New South Wales State Heritage Register on 2 April 1999.
Stewarts Lane is a large railway-servicing facility in Battersea in London, England, founded by the London Chatham and Dover Railway (LCDR) in 1862, to serve London Victoria railway station. It is sited in the midst of a maze of railway lines between 'Factory Junction' and 'Stewarts Lane Junction', adjacent to the site of the former Longhedge Railway Works and the Stewarts Lane Chord formerly used by Eurostar trains from the Kent freight lines to Waterloo International station. Prior to 1962 it was one of the largest motive power depots in the UK. Following the end of steam traction in the early 1960s it was converted into a traction maintenance depot which is currently operated by Govia Thameslink Railway.
The Goulburn Rail Heritage Centre is located at the heritage-listed former railway workshops in Goulburn, New South Wales, Australia, on the Main Southern railway line. Now a museum, it is also known as the Goulburn Rail Workshop and Goulburn Roundhouse. The workshops were added to the New South Wales State Heritage Register on 2 April 1999. The workshops were saved from demolition by the Goulburn Locomotive Roundhouse Preservation Society and is now a museum open to the public with large collection of rolling stock and various exhibits, as well as privately owned locomotives and carriages with some commercial repair work happening on site.
Manningham Engine Shed was a railway depot located in the Manningham suburb of Bradford in West Yorkshire, England. The depot was built to provide steam engines for services leaving Bradford Forster Square station and freight traffic from the Valley Road area of the city. It was also responsible for other sites at Keighley and Ilkley with Manningham itself being a sub-shed of Holbeck.
Whitby engine shed was a steam locomotive depot located at the south end of Whitby railway station in North Yorkshire, England. The shed was opened in 1847, extended in the 1860s, and closed in 1959, when the closure of lines and dieselisation of the routes from Whitby took hold. The shed building, which was grade II listed in 1991, still stands, being utilised for various enterprises, and is now used as holiday accommodation.
{{cite web}}
: CS1 maint: unfit URL (link)