Dehiscence (botany)

Last updated
Dehiscence of the follicular fruit of milkweed (Asclepias syriaca) revealing seeds within Milkweed-in-seed.jpg
Dehiscence of the follicular fruit of milkweed ( Asclepias syriaca ) revealing seeds within

Dehiscence is the splitting of a mature plant structure along a built-in line of weakness to release its contents. This is common among fruits, anthers and sporangia. Sometimes this involves the complete detachment of a part. Structures that open in this way are said to be dehiscent. Structures that do not open in this way are called indehiscent, and rely on other mechanisms such as decay or predation to release the contents.

Contents

A similar process to dehiscence occurs in some flower buds (e.g., Platycodon , Fuchsia ), but this is rarely referred to as dehiscence unless circumscissile dehiscence is involved; anthesis is the usual term for the opening of flowers. Dehiscence may or may not involve the loss of a structure through the process of abscission. The lost structures are said to be caducous .

Association with crop breeding

Manipulation of dehiscence can improve crop yield since a trait that causes seed dispersal is a disadvantage for farmers, whose goal is to collect the seed. Many agronomically important plants have been bred for reduced shattering.

Mechanisms

Explosive dehiscence

Explosive dehiscence is a ballistic form of dispersal that flings seeds or spores far from the parent plant. This rapid plant movement can achieve limited dispersal without the assistance of animals. A notable example is the sandbox tree ( Hura crepitans ), which can fling seeds 100 meters (300 ft) and has been called the "boomer plant" due to the loud sound it generates. Another example is Impatiens , whose explosive dehiscence is triggered by being touched, leading it to be called the "touch-me-not". Ecballium elaterium , the "squirting cucumber", uses explosive dehiscence to disperse its seeds, ejecting them from matured fruit in a stream of mucilaginous liquid. Explosive dehiscence of sporangia is a characteristic of Sphagnum . [1]

Septicidal and loculicidal dehiscence

In loculicidal dehiscence, the locule wall splits between the septa, leaving the latter intact, while in septicidal dehiscence the split is at the septum that separates the loculi. Septicidal and loculicidal dehiscence may not be completely distinct; in some cases both the septa and the walls of the locules split.

Types

Dehiscence occurs through breakage of various parts of the enclosing structure; the mechanisms can be classified in various ways, but intermediate forms also occur.

Poricidal dehiscence

Dehiscence through a small hole (pore) is referred to as poricidal dehiscence. The pore may have a cover (operculate poricidal dehiscence or operculate dehiscence) that is referred to as an operculum or it may not (inoperculate poricidal dehiscence or inoperculate dehiscence).

Poricidal dehiscence occurs in many unrelated organisms, in fruit, causing the release of seeds, and also in the sporangia of many organisms (flowering plants, ferns, fungi, slime molds). Poricidal anthers of various flowers are associated with buzz pollination by insects.

Circumscissile dehiscence

Circumscissile dehiscence involves a horizontal opening that causes a lid to separate completely. This type of dehiscence occurs in some fruit and anthers [2] and also in some flower buds.

Anther dehiscence

Anther dehiscence is the final function of the anther that causes the release of pollen grains. This process is coordinated precisely with pollen differentiation, floral development, and flower opening.

The anther wall breaks at a specific site. Usually this site is observed as an indentation between the locules of each theca and runs the length of the anther, but in species with poricidal anther dehiscence it is instead a small pore. If the pollen is released from the anther through a split on the outer side (relative to the center of the flower), this is extrorse dehiscence, and if the pollen is released from the inner side, this is introrse dehiscence. If the pollen is released through a split that is positioned to the side, towards other anthers, rather than towards the inside or outside of the flower, this is latrorse dehiscence.

The stomium is the region of the anther where dehiscence occurs. The degeneration of the stomium and septum cells is part of a developmentally timed cell-death program. Expansion of the endothecial layer and subsequent drying are also required for dehiscence. The endothecium tissue is responsible for the tensions that lead to splitting of the anther. This tissue is usually one to several layers thick, with cells walls of uneven thickness due to uneven lignification. The cells lose water, and the uneven thickness causes the thinner walls of the cells to stretch to a greater extent. This creates a tension that eventually leads to the anther being split along its line of weakness and releasing pollen grains to the atmosphere.

Flower buds

Flower buds of Eucalyptus and related genera open with circumscissile dehiscence. A small cap separates from the remainder of the bud along a circular horizontal zone.

Fruit dehiscence

There are many different types of fruit dehiscence involving different types of structures. Some fruits are indehiscent, and do not open to disperse the seeds. Xerochasy is dehiscence that occurs upon drying, and hygrochasy is dehiscence that occurs upon wetting, the fruit being hygroscopic. Dehiscent fruits that are derived from one carpel are follicles or legumes, and those derived from multiple carpels are capsules or siliques. [3]

One example of a dehiscent fruit is the silique. This fruit develops from a gynoecium composed of two fused carpels, [3] which, upon fertilization, grow to become a silique that contains the developing seeds. After seed maturation, dehiscence takes place, and valves detach from the central septum, thus freeing the seeds. This is also known as shattering and can be important as a seed dispersal mechanism. This process is similar to anther dehiscence and the region that breaks (dehiscence zone) runs the entire length of the fruit between the valves (the outer walls of the ovary) and the replum (the persisting septa of the ovary). At maturity, the dehiscence zone is effectively a non-lignified layer between two regions of lignified cells in the valve and the replum. Shattering occurs due to the combination of cell wall loosening in the dehiscence zone and the tensions established by the differential hygro-responsive properties of the drying cells. [4]

Sporangium dehiscence in bryophytes

Endothecium tissue found in moss capsules functions in a similar way in dehiscence to the endothecium in the walls of anthers (see above).

Sporangium dehiscence in ferns

Many leptosporangiate ferns have an annulus around the sporangium, which ejects the spores. Eusporangiate ferns do not generally have specialized dehiscence mechanisms.

Sporangium dehiscence in fungi and myxomycetes

See also

Related Research Articles

<span class="mw-page-title-main">Spore</span> Unit of reproduction adapted for dispersal and survival in unfavorable conditions

In biology, a spore is a unit of sexual or asexual reproduction that may be adapted for dispersal and for survival, often for extended periods of time, in unfavourable conditions. Spores form part of the life cycles of many plants, algae, fungi and protozoa. They were thought to have appeared as early as the mid-late Ordovician period as an adaptation of early land plants.

<span class="mw-page-title-main">Sporangium</span> Enclosure in which spores are formed

A sporangium ; pl.: sporangia) is an enclosure in which spores are formed. It can be composed of a single cell or can be multicellular. Virtually all plants, fungi, and many other groups form sporangia at some point in their life cycle. Sporangia can produce spores by mitosis, but in land plants and many fungi, sporangia produce genetically distinct haploid spores by meiosis.

<span class="mw-page-title-main">Stamen</span> Male organ of a flower

The stamen is the pollen-producing reproductive organ of a flower. Collectively, the stamens form the androecium.

<span class="mw-page-title-main">Capsule (fruit)</span> Type of simple, dehiscent fruit

In botany, a capsule is a type of simple, dry, though rarely fleshy dehiscent fruit produced by many species of angiosperms.

<span class="mw-page-title-main">Achene</span> Class of simple non-opening dry fruits

An achene, also sometimes called akene and occasionally achenium or achenocarp, is a type of simple dry fruit produced by many species of flowering plants. Achenes are monocarpellate and indehiscent. Achenes contain a single seed that nearly fills the pericarp, but does not adhere to it. In many species, what is called the "seed" is an achene, a fruit containing the seed. The seed-like appearance is owed to the hardening of the fruit wall (pericarp), which encloses the solitary seed so closely as to seem like a seed coat.

<span class="mw-page-title-main">Ovule</span> Female plant reproductive structure

In seed plants, the ovule is the structure that gives rise to and contains the female reproductive cells. It consists of three parts: the integument, forming its outer layer, the nucellus, and the female gametophyte in its center. The female gametophyte — specifically termed a megagametophyte — is also called the embryo sac in angiosperms. The megagametophyte produces an egg cell for the purpose of fertilization. The ovule is a small structure present in the ovary. It is attached to the placenta by a stalk called a funicle. The funicle provides nourishment to the ovule. On the basis of the relative position of micropyle, body of the ovule, chalaza and funicle, there are six types of ovules.

<span class="mw-page-title-main">Gynoecium</span> Female organs of a flower

Gynoecium is most commonly used as a collective term for the parts of a flower that produce ovules and ultimately develop into the fruit and seeds. The gynoecium is the innermost whorl of a flower; it consists of pistils and is typically surrounded by the pollen-producing reproductive organs, the stamens, collectively called the androecium. The gynoecium is often referred to as the "female" portion of the flower, although rather than directly producing female gametes, the gynoecium produces megaspores, each of which develops into a female gametophyte which then produces egg cells.

<span class="mw-page-title-main">Silique</span> Type of seed capsule, with the length more than three times the width

A silique or siliqua is a type of fruit having two fused carpels with the length being more than three times the width. When the length is less than three times the width of the dried fruit it is referred to as a silicle. The outer walls of the ovary usually separate when ripe, then being named dehiscent, and leaving a persistent partition. Siliques are present in many members of the mustard family, Brassicaceae, but some species have silicles instead. Some species closely related to plants with true siliques have fruits with a similar structure that do not open when ripe; these are usually called indehiscent siliques.

<span class="mw-page-title-main">Ovary (botany)</span> Flowering plant reproductive part

In the flowering plants, an ovary is a part of the female reproductive organ of the flower or gynoecium. Specifically, it is the part of the pistil which holds the ovule(s) and is located above or below or at the point of connection with the base of the petals and sepals. The pistil may be made up of one carpel or of several fused carpels, and therefore the ovary can contain part of one carpel or parts of several fused carpels. Above the ovary is the style and the stigma, which is where the pollen lands and germinates to grow down through the style to the ovary, and, for each individual pollen grain, to fertilize one individual ovule. Some wind pollinated flowers have much reduced and modified ovaries.

<span class="mw-page-title-main">Trochodendraceae</span> Family of flowering plants

Trochodendraceae is the only family of flowering plants in the order Trochodendrales. It comprises two extant genera, each with a single species along with up to five additional extinct genera and a number of extinct species. The living species are native to south east Asia. The two living species both have secondary xylem without vessel elements, which is quite rare in angiosperms. As the vessel-free wood suggests primitiveness, these two species have attracted much taxonomic attention.

<span class="mw-page-title-main">Berry (botany)</span> Botanical fruit with fleshy pericarp, containing one or many seeds

In botany, a berry is a fleshy fruit without a stone (pit) produced from a single flower containing one ovary. Berries so defined include grapes, currants, and tomatoes, as well as cucumbers, eggplants (aubergines), persimmons and bananas, but exclude certain fruits that meet the culinary definition of berries, such as strawberries and raspberries. The berry is the most common type of fleshy fruit in which the entire outer layer of the ovary wall ripens into a potentially edible "pericarp". Berries may be formed from one or more carpels from the same flower. The seeds are usually embedded in the fleshy interior of the ovary, but there are some non-fleshy exceptions, such as Capsicum species, with air rather than pulp around their seeds.

<span class="mw-page-title-main">Flower</span> Reproductive structure in flowering plants

A flower, also known as a bloom or blossom, is the reproductive structure found in flowering plants. Flowers consist of a combination of vegetative organs – sepals that enclose and protect the developing flower. These petals attract pollinators, and reproductive organs that produce gametophytes, which in flowering plants produce gametes. The male gametophytes, which produce sperm, are enclosed within pollen grains produced in the anthers. The female gametophytes are contained within the ovules produced in the carpels.

Plant reproduction is the production of new offspring in plants, which can be accomplished by sexual or asexual reproduction. Sexual reproduction produces offspring by the fusion of gametes, resulting in offspring genetically different from either parent. Asexual reproduction produces new individuals without the fusion of gametes, resulting in clonal plants that are genetically identical to the parent plant and each other, unless mutations occur.

Sporogenesis is the production of spores in biology. The term is also used to refer to the process of reproduction via spores. Reproductive spores were found to be formed in eukaryotic organisms, such as plants, algae and fungi, during their normal reproductive life cycle. Dormant spores are formed, for example by certain fungi and algae, primarily in response to unfavorable growing conditions. Most eukaryotic spores are haploid and form through cell division, though some types are diploid sor dikaryons and form through cell fusion.we can also say this type of reproduction as single pollination

<i>Kleinhovia</i> Genus of plants

Kleinhovia is a monotypic genus of plants in the cotton, hibiscus and cacao family Malvaceae. The sole species in the genus is Kleinhovia hospita, commonly known as guest tree, an evergreen tree native to Indonesia, Malaysia and other parts of tropical Asia and the Pacific.

This page provides a glossary of plant morphology. Botanists and other biologists who study plant morphology use a number of different terms to classify and identify plant organs and parts that can be observed using no more than a handheld magnifying lens. This page provides help in understanding the numerous other pages describing plants by their various taxa. The accompanying page—Plant morphology—provides an overview of the science of the external form of plants. There is also an alphabetical list: Glossary of botanical terms. In contrast, this page deals with botanical terms in a systematic manner, with some illustrations, and organized by plant anatomy and function in plant physiology.

<span class="mw-page-title-main">Fruit (plant structure)</span> Internal makeup of fruits

Fruits are the mature ovary or ovaries of one or more flowers. They are found in three main anatomical categories: aggregate fruits, multiple fruits, and simple fruits.

This glossary of botanical terms is a list of definitions of terms and concepts relevant to botany and plants in general. Terms of plant morphology are included here as well as at the more specific Glossary of plant morphology and Glossary of leaf morphology. For other related terms, see Glossary of phytopathology, Glossary of lichen terms, and List of Latin and Greek words commonly used in systematic names.

<span class="mw-page-title-main">Simple fruit</span>

Simple fruits are the result of the ripening-to-fruit of a simple or compound ovary in a single flower with a single pistil. In contrast, a single flower with numerous pistils typically produces an aggregate fruit; and the merging of several flowers, or a 'multiple' of flowers, results in a 'multiple' fruit. A simple fruit is further classified as either dry or fleshy.

<span class="mw-page-title-main">Floral morphology</span> Study of flower structures

In botany, floral morphology is the study of the diversity of forms and structures presented by the flower, which, by definition, is a branch of limited growth that bears the modified leaves responsible for reproduction and protection of the gametes, called floral pieces.

References

  1. "Image Gallery - page 2". rbg-web2.rbge.org.uk.
  2. Hickey, M.; King, C. (2001). The Cambridge Illustrated Glossary of Botanical Terms. Cambridge University Press.
  3. 1 2 Esau, K. 1977. Anatomy of seed plants. John Wiley and Sons, New York.
  4. Huss, Jessica C.; Gierlinger, Notburga (June 2021). "Functional packaging of seeds". New Phytologist: International Journal of Plant Science. 230 (6): 2154–2163. doi:10.1111/nph.17299. PMC   8252473 . PMID   33629369.

Bibliography