In British railway parlance Dido trains were typically provided to transport workers to a remote place of railway employment on a Day in, day out basis.
The most common provision of this nature was to engine sheds away from centres of population where substantial numbers of staff would need to travel to or from work at times when other forms of public transport were not available. An example of this was the "Annesley Dido" which served the Great Central Railway-built Annesley engine shed north of Nottingham from at least 1929 to 8 September 1962. [1] [2] [3] [4]
A variant on this theme occurred to and from Langwith Junction engine shed in Derbyshire. This service was provided after Tuxford engine shed closed in 1959, when many Tuxford staff were transferred to work at Langwith Junction. [5] [6]
Dido trains were a variant within the broad class of workmen's trains which were provided by railways from their early days until well after the Second World War. Such trains ran to meet the needs of people working at establishments with significant numbers signing on and off at given times, such as collieries, factories, quarries, docks and railway workshops. Such trains were often made up of substandard coaching stock [7] hauled by ancient locomotives, [8] with occasional exceptions when a service's customary locomotive was indisposed. [9] By the nature of their destinations such trains often required special platforms or other stopping places, which usually did not appear on public timetables and did not cater for the general public. Like the rolling stock, these stations were typically substandard, amounting in some cases to an agreed stopping point where users clambered to and from the trackside. [10]
Where public stations existed near places of employment some workmen's trains called, usually not shown on the station's public timetable. [11] Occasionally workmen's carriages were attached to regular service trains. [12]
Whatever the variety of workmen's service used, passengers bought "workmen's tickets" at significantly reduced fares. [13]
Many workmen's services existed over the years. Examples were provided by:
Lowca had two railway stations that served the village of Lowca in the former county of Cumberland, England, which is now part of Cumbria.
Workington Central railway station was opened by the Cleator and Workington Junction Railway (C&WJR) in 1879 to serve the town of Workington in Cumberland, England. It was situated almost half a mile nearer the town centre than its rival Workington station.
Moor Row railway station was built by the Whitehaven, Cleator and Egremont Railway. It served the village of Moor Row, Cumbria, England.
Cleator Moor West railway station was opened as "Cleator Moor" by the Cleator and Workington Junction Railway (C&WJR) in 1879. It served the growing industrial town of Cleator Moor, Cumbria, England.
High Harrington railway station was opened by the Cleator and Workington Junction Railway (C&WJR) in 1879. It was situated half a mile south of Harrington Junction on the company's main line. and served what was then the eastern extremity of Harrington in Cumbria, England. The station is not to be confused with the current Harrington station a kilometre away on the coastal line.
Seaton railway station served the village of Seaton, near Workington in Cumberland, England.
Moresby Junction Halt railway station was opened by the Cleator and Workington Junction Railway (C&WJR) in 1910. Very few people lived near the halt, which served nearby Walkmill Colliery and coke ovens in Cumbria, England.
Keekle Colliers' Platform railway station was opened by the Cleator and Workington Junction Railway (C&WJR) in July 1910, closed the following January, reopened in June 1913 then closed for good on 1 October 1923. The halt was provided to enable residents of the isolated Keekle Terrace, less than 100 yds from the track, to get to and from work at the equally isolated Walkmill Colliery and coke ovens in Cumbria, England. The Platform is not shown by Jowett.
Moresby Parks railway station was opened by the Cleator and Workington Junction Railway (C&WJR) in 1879. It was situated just north of the summit of the company's main line and served the scattered community of Moresby Parks in Cumbria, England.
Harrington Junction was a railway junction in Harrington, Cumbria, England. It joined three branches to the Cleator and Workington Junction Railway's (CWJR) main line from Workington Central to Moor Row via Cleator Moor West. No station ever existed at the junction, High Harrington was the nearest, 48 chains (0.97 km) to the south.
Distington railway station was opened jointly by the Cleator and Workington Junction Railway (C&WJR) and the LNWR and Furness Joint Railway on 1 October 1879. It was situated on the northern edge of the village of Distington, Cumbria, England, where the C&WJR's north–south main line crossed the Joint Line's east–west Gilgarran Branch.
Harrington railway station, or Church Road halt, was a railway station in Harrington, Cumbria, England. It was opened by the Cleator and Workington Junction Railway (C&WJR) on the company's Harrington Branch which connected with the Lowca Light Railway at Rosehill to provide a through route from Lowca to Workington Central and beyond.
Rosehill railway station was opened by the Cleator and Workington Junction Railway (C&WJR) on the company's Harrington Branch which connected with the Lowca Light Railway (LLR) at Rosehill to provide a through route from Lowca to Workington Central and beyond.
Parton Halt railway station was opened by the LNWR and FR Joint Railway in January 1915 and closed by the LMSR fourteen years later in 1929.
The Gilgarran Branch was a 7-mile-32-chain long (11.9 km) single track railway line connecting four separate railway companies in the former county of Cumberland, now part of Cumbria, England.
Micklam railway station served the fireclay mine and brickworks at Micklam, a short distance north of Lowca in the former county of Cumberland, England, which is now part of Cumbria.
Copperas Hill railway station served the small clifftop community of Copperas Hill, south of Harrington in the former county of Cumberland, England, which is now part of Cumbria.
Rose Hill Platform served workmen in the Rose Hill area of Harrington in the former county of Cumberland, England, which is now part of Cumbria.
Moss Bay Cart Siding was used for two periods as a temporary northern terminus for workmen's trains to Lowca. It was situated where Moss Bay Road crossed the CWJR's Derwent Branch in southern Workington in the former county of Cumberland, England, which is now part of Cumbria.
North west Wales experienced a slate boom in the first half of the nineteenth century. Three sites stood out as experiencing the most explosive growth: Dinorwic near Llanberis, Penrhyn near Bethesda and Blaenau Ffestiniog.
{{cite book}}
: CS1 maint: year (link)