Drude particle

Last updated

Drude particles are model oscillators used to simulate the effects of electronic polarizability in the context of a classical molecular mechanics force field. They are inspired by the Drude model of mobile electrons and are used in the computational study of proteins, nucleic acids, and other biomolecules.

Contents

Classical Drude oscillator

Most force fields in current practice represent individual atoms as point particles interacting according to the laws of Newtonian mechanics. To each atom, a single electric charge is assigned that doesn't change during the course of the simulation. However, such models cannot have induced dipoles or other electronic effects due to a changing local environment.

Classical Drude particles are massless virtual sites carrying a partial electric charge, attached to individual atoms via a harmonic spring. The spring constant and relative partial charges on the atom and associated Drude particle determine its response to the local electrostatic field, serving as a proxy [1] for the changing distribution of the electronic charge of the atom or molecule. However, this response is limited to a changing dipole moment. This response is not enough to model interactions in environments with large field gradients, which interact with higher order moments.

Efficiency of simulation

The major computational cost of simulating classical Drude oscillators is the calculation of the local electrostatic field and the repositioning of the Drude particle at each step. Traditionally, this repositioning is done self consistently. This cost can be reduced by assigning a small mass to each Drude particle, applying a Lagrangian transformation [2] and evolving the simulation in the generalised coordinates. This method of simulation has been used to create water models incorporating classical Drude oscillators. [3] [4]

Quantum Drude oscillator

Since the response of a classical Drude oscillator is limited, it is not enough to model interactions in heterogeneous media with large field gradients, where higher order electronic responses have significant contributions to the interaction energy.[ citation needed ] A quantum Drude oscillator (QDO) [5] [6] [7] is a natural extension to the classical Drude oscillator. Instead of a classical point particle serving as a proxy for the charge distribution, a QDO uses a quantum harmonic oscillator, in the form of a pseudoelectron connected to an oppositely charged pseudonucleus by a harmonic spring.

A QDO has three free parameters: the spring's frequency , the pseudoelectron's charge and the system's reduced mass . The ground state of a QDO is a gaussian of width . Adding an external field perturbs the ground state of a QDO, which allows us to calculate its polarizability. [5] To second order, the change in energy relative to the ground state is given by the following series:

where the polarizabilities are

Furthermore, since QDOs are quantum mechanical objects, their electrons can correlate, giving rise to dispersion forces between them. The second order change in energy corresponding to such an interaction is:

with the first three dispersion coefficients being (in the case of identical QDOs):

Since the response coefficients of QDOs depend on three parameters only, they are all related. Thus, these response coefficients can combine into four dimensionless constants, all equal to unity:

The QDO representation of atoms is the basis of the many body dispersion model [8] which is a popular way to account for electrostatic forces in molecular dynamics simulations. [9] This representation allows describing the processes of biological ion transport [10] , small drug molecules across hydrophobic cell membranes [11] and the behavior of proteins in solutions [12] .

Related Research Articles

In mechanics and physics, simple harmonic motion is a special type of periodic motion an object experiences due to a restoring force whose magnitude is directly proportional to the distance of the object from an equilibrium position and acts towards the equilibrium position. It results in an oscillation that is described by a sinusoid which continues indefinitely.

<span class="mw-page-title-main">Quantum harmonic oscillator</span> Important, well-understood quantum mechanical model

The quantum harmonic oscillator is the quantum-mechanical analog of the classical harmonic oscillator. Because an arbitrary smooth potential can usually be approximated as a harmonic potential at the vicinity of a stable equilibrium point, it is one of the most important model systems in quantum mechanics. Furthermore, it is one of the few quantum-mechanical systems for which an exact, analytical solution is known.

In physics, a phonon is a collective excitation in a periodic, elastic arrangement of atoms or molecules in condensed matter, specifically in solids and some liquids. A type of quasiparticle, a phonon is an excited state in the quantum mechanical quantization of the modes of vibrations for elastic structures of interacting particles. Phonons can be thought of as quantized sound waves, similar to photons as quantized light waves. However, photons are fundamental particles that can be individually detected, whereas phonons, being quasiparticles, are an emergent phenomenon.

In physics, specifically in quantum mechanics, a coherent state is the specific quantum state of the quantum harmonic oscillator, often described as a state which has dynamics most closely resembling the oscillatory behavior of a classical harmonic oscillator. It was the first example of quantum dynamics when Erwin Schrödinger derived it in 1926, while searching for solutions of the Schrödinger equation that satisfy the correspondence principle. The quantum harmonic oscillator arise in the quantum theory of a wide range of physical systems. For instance, a coherent state describes the oscillating motion of a particle confined in a quadratic potential well. The coherent state describes a state in a system for which the ground-state wavepacket is displaced from the origin of the system. This state can be related to classical solutions by a particle oscillating with an amplitude equivalent to the displacement.

Chemistry at Harvard Macromolecular Mechanics (CHARMM) is the name of a widely used set of force fields for molecular dynamics, and the name for the molecular dynamics simulation and analysis computer software package associated with them. The CHARMM Development Project involves a worldwide network of developers working with Martin Karplus and his group at Harvard to develop and maintain the CHARMM program. Licenses for this software are available, for a fee, to people and groups working in academia.

<span class="mw-page-title-main">Debye model</span> Method in physics

In thermodynamics and solid-state physics, the Debye model is a method developed by Peter Debye in 1912 for estimating the phonon contribution to the specific heat in a solid. It treats the vibrations of the atomic lattice (heat) as phonons in a box, in contrast to the Einstein photoelectron model, which treats the solid as many individual, non-interacting quantum harmonic oscillators. The Debye model correctly predicts the low-temperature dependence of the heat capacity of solids, which is proportional to – the Debye T 3 law. Similarly to the Einstein photoelectron model, it recovers the Dulong–Petit law at high temperatures. Due to simplifying assumptions, its accuracy suffers at intermediate temperatures.

Creation operators and annihilation operators are mathematical operators that have widespread applications in quantum mechanics, notably in the study of quantum harmonic oscillators and many-particle systems. An annihilation operator lowers the number of particles in a given state by one. A creation operator increases the number of particles in a given state by one, and it is the adjoint of the annihilation operator. In many subfields of physics and chemistry, the use of these operators instead of wavefunctions is known as second quantization. They were introduced by Paul Dirac.

<span class="mw-page-title-main">Dispersion relation</span> Relation of wavelength/wavenumber as a function of a waves frequency

In the physical sciences and electrical engineering, dispersion relations describe the effect of dispersion on the properties of waves in a medium. A dispersion relation relates the wavelength or wavenumber of a wave to its frequency. Given the dispersion relation, one can calculate the frequency-dependent phase velocity and group velocity of each sinusoidal component of a wave in the medium, as a function of frequency. In addition to the geometry-dependent and material-dependent dispersion relations, the overarching Kramers–Kronig relations describe the frequency-dependence of wave propagation and attenuation.

The old quantum theory is a collection of results from the years 1900–1925 which predate modern quantum mechanics. The theory was never complete or self-consistent, but was rather a set of heuristic corrections to classical mechanics. The theory is now understood as the semi-classical approximation to modern quantum mechanics. The main and final accomplishments of the old quantum theory were the determination of the modern form of the periodic table by Edmund Stoner and the Pauli exclusion principle which were both premised on the Arnold Sommerfeld enhancements to the Bohr model of the atom.

<span class="mw-page-title-main">Jaynes–Cummings model</span> Model in quantum optics

The Jaynes–Cummings model is a theoretical model in quantum optics. It describes the system of a two-level atom interacting with a quantized mode of an optical cavity, with or without the presence of light. It was originally developed to study the interaction of atoms with the quantized electromagnetic field in order to investigate the phenomena of spontaneous emission and absorption of photons in a cavity.

Photon polarization is the quantum mechanical description of the classical polarized sinusoidal plane electromagnetic wave. An individual photon can be described as having right or left circular polarization, or a superposition of the two. Equivalently, a photon can be described as having horizontal or vertical linear polarization, or a superposition of the two.

The theoretical and experimental justification for the Schrödinger equation motivates the discovery of the Schrödinger equation, the equation that describes the dynamics of nonrelativistic particles. The motivation uses photons, which are relativistic particles with dynamics described by Maxwell's equations, as an analogue for all types of particles.

In spectroscopy, the Autler–Townes effect, is a dynamical Stark effect corresponding to the case when an oscillating electric field is tuned in resonance to the transition frequency of a given spectral line, and resulting in a change of the shape of the absorption/emission spectra of that spectral line. The AC Stark effect was discovered in 1955 by American physicists Stanley Autler and Charles Townes.

Surface-extended X-ray absorption fine structure (SEXAFS) is the surface-sensitive equivalent of the EXAFS technique. This technique involves the illumination of the sample by high-intensity X-ray beams from a synchrotron and monitoring their photoabsorption by detecting in the intensity of Auger electrons as a function of the incident photon energy. Surface sensitivity is achieved by the interpretation of data depending on the intensity of the Auger electrons instead of looking at the relative absorption of the X-rays as in the parent method, EXAFS.

In linear algebra, a raising or lowering operator is an operator that increases or decreases the eigenvalue of another operator. In quantum mechanics, the raising operator is sometimes called the creation operator, and the lowering operator the annihilation operator. Well-known applications of ladder operators in quantum mechanics are in the formalisms of the quantum harmonic oscillator and angular momentum.

<span class="mw-page-title-main">Dulong–Petit law</span> Empirical thermodynamic law

The Dulong–Petit law, a thermodynamic law proposed by French physicists Pierre Louis Dulong and Alexis Thérèse Petit, states that the classical expression for the molar specific heat capacity of certain chemical elements is constant for temperatures far from the absolute zero.

An LC circuit can be quantized using the same methods as for the quantum harmonic oscillator. An LC circuit is a variety of resonant circuit, and consists of an inductor, represented by the letter L, and a capacitor, represented by the letter C. When connected together, an electric current can alternate between them at the circuit's resonant frequency:

An electric dipole transition is the dominant effect of an interaction of an electron in an atom with the electromagnetic field.

Heat transfer physics describes the kinetics of energy storage, transport, and energy transformation by principal energy carriers: phonons, electrons, fluid particles, and photons. Heat is energy stored in temperature-dependent motion of particles including electrons, atomic nuclei, individual atoms, and molecules. Heat is transferred to and from matter by the principal energy carriers. The state of energy stored within matter, or transported by the carriers, is described by a combination of classical and quantum statistical mechanics. The energy is different made (converted) among various carriers. The heat transfer processes are governed by the rates at which various related physical phenomena occur, such as the rate of particle collisions in classical mechanics. These various states and kinetics determine the heat transfer, i.e., the net rate of energy storage or transport. Governing these process from the atomic level to macroscale are the laws of thermodynamics, including conservation of energy.

<span class="mw-page-title-main">Superradiant phase transition</span> Process in quantum optics

In quantum optics, a superradiant phase transition is a phase transition that occurs in a collection of fluorescent emitters, between a state containing few electromagnetic excitations and a superradiant state with many electromagnetic excitations trapped inside the emitters. The superradiant state is made thermodynamically favorable by having strong, coherent interactions between the emitters.

References

  1. Mackerell, Alexander D. (2004). "Empirical force fields for biological macromolecules: Overview and issues". Journal of Computational Chemistry. Wiley. 25 (13): 1584–1604. doi:10.1002/jcc.20082. ISSN   0192-8651. PMID   15264253. S2CID   9162620.
  2. Lamoureux, Guillaume; Roux, Benoı̂t (2003-08-08). "Modeling induced polarization with classical Drude oscillators: Theory and molecular dynamics simulation algorithm". The Journal of Chemical Physics. AIP Publishing. 119 (6): 3025–3039. Bibcode:2003JChPh.119.3025L. doi: 10.1063/1.1589749 . ISSN   0021-9606.
  3. Lamoureux, Guillaume; MacKerell, Alexander D.; Roux, Benoı̂t (2003-09-08). "A simple polarizable model of water based on classical Drude oscillators". The Journal of Chemical Physics. AIP Publishing. 119 (10): 5185–5197. Bibcode:2003JChPh.119.5185L. doi:10.1063/1.1598191. ISSN   0021-9606.
  4. Lamoureux, Guillaume; Harder, Edward; Vorobyov, Igor V.; Roux, Benoît; MacKerell, Alexander D. (2006). "A polarizable model of water for molecular dynamics simulations of biomolecules". Chemical Physics Letters. Elsevier BV. 418 (1–3): 245–249. Bibcode:2006CPL...418..245L. doi:10.1016/j.cplett.2005.10.135. ISSN   0009-2614.
  5. 1 2 A. Jones, “Quantum Drude Oscillators for Accurate Many-body Intermolecular Forces,” The University of Edinburgh, 2010.
  6. Jones, Andrew; Thompson, Andrew; Crain, Jason; Müser, Martin H.; Martyna, Glenn J. (2009-04-27). "Norm-conserving diffusion Monte Carlo method and diagrammatic expansion of interacting Drude oscillators: Application to solid xenon". Physical Review B. American Physical Society (APS). 79 (14): 144119. Bibcode:2009PhRvB..79n4119J. doi:10.1103/physrevb.79.144119. ISSN   1098-0121.
  7. Jones, A.; Cipcigan, F.; Sokhan, V. P.; Crain, J.; Martyna, G. J. (2013-05-31). "Electronically Coarse-Grained Model for Water". Physical Review Letters. American Physical Society (APS). 110 (22): 227801. Bibcode:2013PhRvL.110v7801J. doi:10.1103/physrevlett.110.227801. ISSN   0031-9007. PMID   23767748.
  8. "Many body dispersion".
  9. Bučko, Tomáš; Lebègue, Sébastien; Gould, Tim; Ángyán, János G (2016-01-12). "Many-body dispersion corrections for periodic systems: an efficient reciprocal space implementation". Journal of Physics: Condensed Matter. IOP Publishing. 28 (4): 045201. Bibcode:2016JPCM...28d5201B. doi:10.1088/0953-8984/28/4/045201. ISSN   0953-8984. PMID   26753609. S2CID   2620743.
  10. Manin, Nikolai; da Silva, Mauricio C.; Zdravkovic, Igor; Eliseeva, Olga; Dyshin, Alexey; Yaşar, Orhan; Salahub, Dennis R.; Kolker, Arkadiy M.; Kiselev, Michael G.; Noskov, Sergei Yu. (2016). "LiCl solvation in N-methyl-acetamide (NMA) as a model for understanding Li + binding to an amide plane". Physical Chemistry Chemical Physics. 18 (5): 4191–4200. doi:10.1039/C5CP04847H. ISSN   1463-9076.
  11. Lemkul, Justin A.; Huang, Jing; Roux, Benoît; MacKerell, Alexander D. (2016-05-11). "An Empirical Polarizable Force Field Based on the Classical Drude Oscillator Model: Development History and Recent Applications". Chemical Reviews. 116 (9): 4983–5013. doi:10.1021/acs.chemrev.5b00505. ISSN   0009-2665. PMC   4865892 . PMID   26815602.
  12. Huang, Jing; Lopes, Pedro E. M.; Roux, Benoît; MacKerell, Alexander D. (2014-09-18). "Recent Advances in Polarizable Force Fields for Macromolecules: Microsecond Simulations of Proteins Using the Classical Drude Oscillator Model". The Journal of Physical Chemistry Letters. 5 (18): 3144–3150. doi:10.1021/jz501315h. ISSN   1948-7185. PMC   4167036 . PMID   25247054.