Eamont (schooner)

Last updated
History
Civil Ensign of the United Kingdom.svgUnited Kingdom
NameEamont
Owner Dent & Co
BuilderWhite, Cowes
Launched1854
General characteristics
Tons burthen120 (bm
Length87 ft (26.5 m)
Beam20 ft (6.1 m)
Draught12 ft (3.7 m)
Sail plan Schooner

Eamont was an opium clipper built in Cowes. [1] It was the subject of an 1891 book, A cruise in an opium clipper, by Captain Lindsay Anderson. [2]

Contents

Eamont was involved in the opening of Japan to foreigners in 1858, serving as a dispatch boat between Nagasaki and Shanghai, [3] and was one of the first vessels to open up a trade with Formosa.

Construction

White, of Cowes, built both Eamont and Wild Dayrell. Eamont was constructed of teak and mahogany, measured a little over 200 tons and had a mainboom 110 feet long. She was a very powerful vessel and carried 200 tons of iron kentledge fitted into her as a stationary ballast. She was armed with four 18-pounders a side and two pivot guns, like Zephyr , the two vessels belonging to Dent & Co.

Career

During the Taiping Rebellion Eamont ran up to the threatened city of Ningpo, passing right through the Battle of Chinhae, which was being waged not only on the banks but in the river itself. At Ningpo she found Zephyr. The two schooners loaded up with fugitive celestials, and raced each other back to Woosung. But in the smooth sheltered water of the river, and with a fresh whole sail breeze, Zephyr more than a match for the more strongly built Cowes schooner. However, Eamont had her revenge in weather more to her choice. The two vessels met this time in half a gale of wind with a heavy sea running, and Eamont sailed right dead to windward of Zephyr, and left her out of sight in twelve hours.

Eamont was sent on some very dangerous trips. She was one of the first vessels to open up a trade with Formosa, and made the first survey of the port of Taku, which she entered by bumping over the reef in spite of a tremendous surf beating upon it at the time, a most daring performance. And in her efforts to trade with the Formosans she had to withstand the attack of hundreds of armed natives right on top of a typhoon, which she succeeded in riding out on her moorings. But Eamont's captain was a famous fighting man, as the Chinese pirates knew to their cost. In his constant encounters with piratical lorchas Captain Gulliver made use of a drag sail, with which he would suddenly deaden the way of his schooner, and so out-manoeuvre these "Invincibles," as they called themselves.

Eamont was also employed in the negotiations for the first commercial treaty with Japan. On this occasion she ran into Nagasaki and quietly dropped anchor, in spite of the fact that opposition to the proposed commercial treaty was very strong at the time. On the following morning 150 boat-loads of Japanese attempted to tow her to sea, being evidently ignorant of an anchor's raison d'être. But though they attempted several similar methods to get rid of her they refrained from any armed attack, and, eventually, her mission was completely successful. This was in 1858, and Eamont's crew saw many wonderful sights in that tierra incognita.

Typhoon of 1858

Double Haven, Double Island, in 2011 Double Haven 2.jpg
Double Haven, Double Island, in 2011

On 21 September 1858, [4] a typhoon destroyed several well-known opium clippers, including Anonyma, Gazelle, Pantaloon, and Mazeppa. Eamont was anchored off Double Island, with "150 fathoms (900 feet; 270 meters) of chain out and a second anchor backed on it at 60 fathoms (360 feet; 110 meters)]." The waves in the anchorage were estimated to be as large as 40 feet (12 meters), and Eamont’s crew had to cut away her masts. Eamont was one of only two ships in that anchorage to survive the night, the other being Hazard. [5]

Related Research Articles

<span class="mw-page-title-main">Clipper</span> Very fast sailing ship of the 19th century

A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. Clippers were generally narrow for their length, small by later 19th century standards, could carry limited bulk freight, and had a large total sail area. "Clipper" does not refer to a specific sailplan; clippers may be schooners, brigs, brigantines, etc., as well as full-rigged ships. Clippers were mostly constructed in British and American shipyards, although France, Brazil, the Netherlands and other nations also produced some. Clippers sailed all over the world, primarily on the trade routes between the United Kingdom and China, in transatlantic trade, and on the New York-to-San Francisco route around Cape Horn during the California Gold Rush. Dutch clippers were built beginning in the 1850s for the tea trade and passenger service to Java.

<i>Royal Clipper</i> Sail cruise ship, built 2000

Royal Clipper is a steel-hulled five-masted fully rigged tall ship used as a cruise ship. She was redesigned by Robert McFarlane of McFarlane ShipDesign, for Star Clippers Ltd. of Sweden, the same designer behind the cruise company's first two vessels. This third one was built using an existing steel hull designed by Zygmunt Choreń that was modified by the Gdańsk Shipyard, where 24 metres (79 ft) was added to its length.

<i>Marco Polo</i> (1851 ship)

Marco Polo was a three-masted wooden clipper ship, launched in 1851 at Saint John, New Brunswick. She was named after Venetian traveler Marco Polo. The ship carried emigrants and passengers to Australia and was the first vessel to make the round trip from Liverpool in under six months. Later in her career, the ship was used as a cargo ship before running aground off Cavendish, Prince Edward Island, in 1883.

<i>Ariel</i> (clipper)

Ariel was a clipper ship famous for making fast voyages between China and England in the late 1860s. She is most famous for almost winning The Great Tea Race of 1866, an unofficial race between Fuzhou, China and London with the first tea crop of the 1866 season.

<i>Pride of Baltimore</i>

The Pride of Baltimore was a reproduction of a typical early 19th-century "Baltimore clipper" topsail schooner. This was a style of vessel made famous by its success as a privateer commerce raider, a small warship in the War of 1812 (1812–1815) against British merchant shipping and the world-wide British Royal Navy. After the end of the war, Baltimore Clippers did not have sufficient cargo capacity for normal merchant trade, so some were used in the illegal opium trade into China and vessels of the same type were used in the transatlantic slave trade from Africa.

<span class="mw-page-title-main">Baltimore Clipper</span>

A Baltimore Clipper is a fast sailing ship historically built on the mid-Atlantic seaboard of the United States of America, especially at the port of Baltimore, Maryland. An early form of clipper, the name is most commonly applied to two-masted schooners and brigantines. These vessels may also be referred to as Baltimore Flyers.

HMS <i>Pelorus</i> (1808) Brig-sloop of the Royal Navy

HMS Pelorus was an 18-gun Cruizer-class brig-sloop of the British Royal Navy. She was built in Itchenor, England and launched on 25 June 1808. She saw action in the Napoleonic Wars and in the War of 1812. On anti-slavery patrol off West Africa, she captured four slavers and freed some 1350 slaves. She charted parts of Australia and New Zealand and participated in the First Opium War (1839–1842) before becoming a merchantman and wrecking in 1844 while transporting opium to China.

<i>Great Republic</i> (1853 clipper)

When launched in 1853, Great Republic was the largest wooden ship in the world. She shared this title with another American-built ship, the steamship Adriatic. She was also the largest full-rigged ship ever built in the United States. She was built by Donald McKay for trade on his own account to Australia.

<span class="mw-page-title-main">Great Tea Race of 1866</span>

In the middle third of the 19th century, the clippers which carried cargoes of tea from China to Britain would compete in informal races to be first ship to dock in London with the new crop of each season. The Great Tea Race of 1866 was keenly followed in the press, with an extremely close finish. Taeping docked 28 minutes before Ariel - after a passage of more than 14,000 miles. Ariel had been ahead when the ships were taken in tow by steam tugs off Deal, but after waiting for the tide at Gravesend the deciding factor was the height of tide at which one could enter the different docks used by each ship. The third finisher, Serica, docked an hour and 15 minutes after Ariel. These three ships had left China on the same tide and arrived at London 99 days later to dock on the same tide. The next to arrive, 28 hours later, was Fiery Cross, followed, the next day, by Taitsing.

<i>Sea Serpent</i> (clipper)

Sea Serpent was an 1850 extreme clipper that sailed in the San Francisco trade, the China trade, and the transatlantic lumber trade. She was one of the longest lived clippers, with a service life of 36 years and 5 months.

<i>Golden Fleece</i> (clipper)

Golden Fleece was an 1855 medium clipper in the California trade, built by Paul Curtis. She was known for arriving with cargoes in good condition, for making passages in consistently good time, and for catching fire with a load of ice.

<i>Sylph</i> (1831 ship) Clipper ship

Sylph was a clipper ship built at Sulkea, opposite Calcutta, in 1831 for the Parsi merchant Rustomjee Cowasjee. After her purchase by the Hong Kong-based merchant house Jardine Matheson, in 1833 Sylph set a speed record by sailing from Calcutta to Macao in 17 days, 17 hours. Her primary role was to transport opium between various ports in the Far East. She disappeared en route to Singapore in 1849.

The schooner Anglona was the first American opium clipper. She sailed in the Chinese coastal trade in the 1840s, and had a famous race with the schooner Ariel around Lintin Island.

<i>Lahloo</i> (clipper)

Lahloo was a British tea clipper known for winning the Tea Race of 1870, and finishing second in the Tea Race of 1871. She sailed from Fuzhou to London with over a million pounds of tea in 1868.

<i>Lord of the Isles</i> (clipper)

Lord of the Isles was the first iron-hulled tea clipper, built in Greenock in 1853. She served in the tea trade until 1862, and also made voyages to Australia. She is known for a record passage between Greenock and Shanghai, and for her close finish in the 1856 Tea Race from China to England, docking in London just ten minutes before Maury. This race was the basis for the plot of a 1927 movie by Cecil B. DeMille The Yankee Clipper.

Zephyr was an 1842 opium clipper built by Samuel Hall, East Boston that was known for its speed.

<i>Yatala</i> (clipper ship) English ship wrecked in 1872

Yatala was a British clipper ship that was built in England in 1865 and wrecked on the north coast of France in 1872. She spent her seven-year career with Anderson, Thomson and Co's Orient Line, sailing between London and South Australia.

<i>Schomberg</i> (1855)

The SS Schomberg was a clipper built in Aberdeen by Alexander Hall & Co. for "the Black Ball line" for carrying large cargoes and steerage passengers, and to "outdo the Americans". When built, she was regarded as the most luxurious and well-built clipper of the period.

Kaisow, a composite clipper, was built by Robert Steele & Company at Greenock and launched on 19 November 1868.

References

  1. Lubbock, Basil (1933). The Opium Clippers. Boston, MA: Charles E. Lauriat Co. pp. 339, 341, 347, 351–2, 364–8, 384.
  2. Captain Lindsay Anderson (1891). A cruise in an opium clipper. London: Chapman and Hall, Limited. Retrieved 2013-03-21.
  3. Lubbock (1933), p. 351-352
  4. "China". Daily News. No. 3913. London. 28 November 1858.
  5. Lubbock (1933), p. 384.

PD-icon.svg This article incorporates text from this source, which is in the public domain :Lubbock, Basil (1914). The China clippers (2nd ed.). Glasgow: James Brown & Son. Retrieved 2013-03-21.

Further reading