| IA 38 | |
|---|---|
 | |
| The prototype IAe.38 under construction | |
| Role | Experimental tailless transport aircraft |
| National origin | Argentina |
| Manufacturer | DINFIA |
| First flight | 1960 |
| Number built | 1 |
The DINFIA IA 38 was a 1960s Argentine four-engine experimental tailless transport aircraft, designed under the direction of Reimar Horten and based on the German Horten Ho VIII project and built by the DINFIA.
The IA 38 was an experimental cargo aircraft based on research by Reimar Horten. The design was developed to meet a 1950 requirement for an aircraft to carry citrus fruits (and in particular, oranges) from the west of Argentina to Buenos Aires, there being no rail links (except to San Luis, Mendoza and other cities) while the roads were inadequate for heavy trucks. [1] [2] It was an all-metal tailless shoulder-wing swept monoplane, with the vertical control surfaces located near the tips of the wings. The short, stubby fuselage was fitted with a tricycle landing gear, with a retractable nosewheel and fixed mainwheels. [3] [4] Power was provided by four radial engines mounted within the wings, driving pusher propellers mounted clear of the wing trailing edges. The aircraft was designed to use 750 hp (560 kW) I.Ae. 19R El Indio, but these were not available and the prototype was forced to use 450 hp (340 kW) I.Ae. 16 El Gaucho engines instead. [3] [4] A crew of two were sat in an enclosed cockpit above the leading edge of the wing. [5] A cargo compartment within the fuselage had a capacity of 30 m3 (1,100 cu ft) (with a 6 long tons (6,100 kg; 13,000 lb) load planned) and could be accessed by a clamshell rear cargo door that could be opened in flight to allow air-dropping of loads. [3] [5]
Development work and construction of the prototype was slow, and was further slowed down by the Revolución Libertadora of 1955 that overthrew the government of Juan Perón. While work restarted in 1958, the prototype only made its first flight to 9 December 1960. [2] The IA 38 proved to be difficult to control, and was underpowered, giving a poor performance, while the engines also suffered from overheating. [3] [4] The prototype made three more test flights before the project was cancelled in 1962. [2]
After the project was cancelled, the IA 38 was placed in the grounds of the Aeronautical School, where it was used as a static display until a fire (suspected to have been an act of arson) destroyed the aircraft's skin. The remains of the plane were scrapped afterwards.
Data from Jane's All The World's Aircraft 1961–62 [5]
General characteristics
Performance
Related lists
Media related to DINFIA IA 38 at Wikimedia Commons
Walter Horten and Reimar Horten, sometimes credited as the Horten Brothers, were German aircraft pilots. Walter was a fighter pilot on the Western Front, flying a Bf 109 for Jagdgeschwader 26 in the first six months of World War II; he eventually became the unit's technical officer. Reimar was also trained as a Messerschmitt Bf 109 pilot; however, later in August 1940, he was transferred to the glider pilot school in Braunschweig. He earned his PhD in mathematics from the University of Göttingen, having resumed his studies in 1946 with help from Ludwig Prandtl. The Hortens designed the world's first jet-powered flying wing, the Horten Ho 229.
The Vought F6U Pirate was the Vought company's first jet fighter, designed for the United States Navy during the mid-1940s. Although pioneering the use of turbojet power as the first naval fighter with an afterburner and composite material construction, the aircraft proved to be underpowered and was judged unsuitable for combat. None were ever issued to operational squadrons and they were relegated to development, training, and test roles before they were withdrawn from service in 1950.
The Short Sturgeon was a planned British carrier-borne reconnaissance bomber whose development began during Second World War with the S.6/43 requirement for a high-performance torpedo bomber, which was later refined into the S.11/43 requirement which was won by the Sturgeon. With the end of the war in the Pacific production of the aircraft carriers from which the Sturgeon was intended to operate was suspended and the original reconnaissance bomber specification was cancelled.
The I.Ae. 30 "Ñancú" was an Argentine twin piston engined fighter designed by the Instituto Aerotécnico in the late 1940s, similar to the de Havilland Hornet, but made of metal rather than wood. Only one prototype was completed; the project was abandoned in favour of the FMA I.Ae. 27 Pulqui I jet aircraft.
The I.A. 50 Guaraní II is an Argentine utility aircraft designed at the DINFIA in the early 1960s.
In aeronautics, a tailless aircraft is an aircraft with no other horizontal aerodynamic surface besides its main wing. It may still have a fuselage, vertical tail fin, and/or vertical rudder.
The DINFIA IA 35 Huanquero was a 1950s Argentine twin-engined general-purpose monoplane aircraft built by the DINFIA.
The DINFIA IA 45 Querandi was a 1950s Argentine twin-engined light transport aircraft built by the DINFIA.
The DINFIA IA 46 Ranquel, IA 46 Super Ranquel, and IA 51 Tehuelche were Argentine utility aircraft developed in the late 1950s.
The DINFIA IA 53 Mamboretá was an agricultural aircraft developed in Argentina by DINFIA in the 1960s.
The Roland D.VI was a German fighter aircraft built at the end of World War I. It lost a fly-off to the Fokker D.VII, but production went ahead anyway as insurance against problems with the Fokker.
The LFG Roland D.I was a fighter aircraft produced in Germany during World War I. It was a single-seat aircraft based originally on the Roland C.II two-seat reconnaissance type. It shared its predecessor's unusual design feature of having a deep fuselage that completely filled the interplane gap, but in comparison, the fuselage was much sleeker. While the C.II's appearance had earned the Walfisch ("Whale"), the D.I became known as the Haifisch ("Shark"). The I-struts that had been used to brace the C.II's wing were replaced by more conventional struts. Other changes to the wing included the removal of stagger from the design and the introduction of slight sweepback.
The Nikitin-Schyevchyenko IS series, were single seat polymorphic fighters designed and produced in the USSR from 1938.
The I.Ae. 34 Clen Antú, sometimes known as the Horten XVa after its designer Reimar Horten, was a two-seat tailless glider built in Argentina. Two single-seat variants competed unsuccessfully in the 1952 World Gliding Championships.
The FMA I.Ae. 37 was a prototype jet fighter developed in Argentina during the 1950s. It never flew and was cancelled in 1960.
The I.Ae.41 Urubú was a two-seat flying wing tailless glider, built in Argentina by the Fábrica Militar de Aviones (FMA) in the 1950s.
The Kaproni Bulgarski KB-11 Fazan was a 1940s Bulgarian army liaison and utility monoplane built by Kaproni Bulgarski, a subsidiary of the Italian aviation conglomerate Società Italiana Caproni.
The Wibault 3 or Wibault Wib 3 C.1 was a French parasol wing prototype fighter aircraft from the 1920s, designed for high altitude operations. Its development was abandoned after repeated materials failure in its supercharger.
The Wibault Wib 210 C.1 was a single engine, single seat low wing monoplane fighter aircraft, designed and built in France in the late 1920s. Flight tests revealed vibration problems and development was quickly abandoned.
The Horten H.VII was a flying wing fighter-trainer aircraft designed by the Horten brothers in Nazi Germany during World War II.