| FS ALe 642 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 FS Class ALe 642 at Bologna Centrale station | |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
FS ALe 642 is a class of Italian Electric Multiple Unit trains built from 1991 to 1995 for use on secondary lines and for commuter traffic. In service since 1991.
| FS ALe 642 | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FS Class ALe 642 at Bologna Centrale station | |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
| |||||||||||||||||||||
FS ALe 642 is a class of Italian Electric Multiple Unit trains built from 1991 to 1995 for use on secondary lines and for commuter traffic. In service since 1991.
This class is strictly derived from the previous ALe 582 and ALe 724 EMUs, sharing most of the mechanical and technical characteristics. The main differences are in the electrical part (especially traction control and low tension circuitry) and for the presence of 2nd class only seatings. The frontal part containing cabins consists of a preformed structure made of polyester reinforced with fiberglass. They originally had the Navetta livery, painted in gray with orange and red lateral stripes; now they all have received the corporate green-white XMPR livery.
Like the previous EMUs on which they are based on, Class 642 can be divided in one or more sections containing a varying number of elements:
Each section must contain at least one ALe and one Le, with a driving cabin on each end; a train can be formed by a maximum of two sections coupled with Scharfenberg type automatic coupler. Basic section arrangement are:
- ALe 642 + Le 764 + ALe 642
- ALe 642 + Le 764 + Le 764 + ALe 642
- ALe 642 + Le 682 *
- ALe 642 + Le 764 + Le 682 *
- ALe 642 + Le 764 + Le 764 + Le 682 *
(where "M" are ALe 642, "R" Le 764 and "Rp" Le 682).
Engine units employ four direct current traction motors placed inside the bogies, two for each one of them.
They are fed by choppers, one per bogie; unlike ALe 724, where the regulation is shunt-chopper type and a resistor is used when accelerating at low speeds, a full-chopper system is used as on ALe 582 with the only difference that, in this case, Class 642s are fitted with three-frequency choppers (582s employ single frequency ones).
Chopper regulation allows rheostatic braking (active above/until 35 km/h (22 mph), about 7 km/h (4.3 mph) if also using pneumatic braking) and the current generated by motors can be sent to the overhead supply line if there are other trains able to absorb it. An interlocking valve limits to 0.4 bars the pressure into the brake cylinders of the ALes when electrically braking.
Low tension circuitry employs 24 V batteries (110 V on ALe 724 and ALe 582) recharged by 380 V three-phase 70 kVA DC/AC static converters, located on engine units and Le 682 and which supply electric current to auxiliary services.
ALe 642 complexes normally consist of two traction units (ALe 642) in multiple control and their trailers (Le 764), interspersed between the two units. One of the two traction units can be replaced by the pilot car (Le 682).
The possible compositions are as follows:
- ALe 642 + Le 764 + ALe 642
- ALe 642 + Le 764 + ALe 642
- ALe 642 + Le 682 *
- ALe 642 + Le 764 + Le 682 *
- ALe 642 + Le 764 + Le 764 + Le 682 *
(* the Le 682 pilot car can be either at the head or at the rear of the train, being equipped with a driver's cab and suitable for remote control of the traction units)
If it is necessary, it is possible to form trains composed of more than one composition; in this case the individual compositions go to form a single train composed of several "sections."
It is not possible to couple two traction units without intermediate trailers.
The ALe 642 group is not electrically compatible with the ALe 582 and ALe 724 group, so the coupling of different groups is never realized.
Since 2002 the ALe 642 group have received substantial upgrades in order to improve comfort and extend their service life; new modern seats were installed to replace the original ones, interior's color scheme was slightly changed, electronic screens showing trip info were also added, as well as an improved air conditioning system. In addition to this, all units were fitted with the SCMT (Sistema Controllo Marcia Treno) safety system, thus making the entire group compliant with the latest safety regulations..
The entire group of ALe 642 in service is assigned to the Pisa depot and performs short-range regional services in Tuscany and neighboring regions on routes such as Livorno-Pisa-Pontedera, Pisa-Pontedera, Pisa-Lucca, Lucca-Pisa-Pontedera, Lucca-Pisa-Livorno, Pisa-La Spezia, Livorno-Pisa-La Spezia, La Spezia-Pontremoli, La Spezia-Parma, Pontremoli-Parma, Pisa-Follonica, Pisa-Piombino, and Pisa-Campiglia Marittima.
On 25 May 2022, while waiting for departure on La Spezia Centrale platform n°1, ALe 642 044 unit suffered severe damage to its electrical part and interior due to a fire, which has also determined the evacuation of the train station with consequential delays and disruptions.
The SNCF BB 26000 locomotives are a class of dual voltage, four axle B'B' electric locomotives capable of a top speed of 200 km/h built by GEC Alsthom between 1988 and 1998 for SNCF. The locomotives are also commonly known as the Sybics.
The DB Class 101 is a class of three-phase electric locomotives built by Adtranz and operated by DB Fernverkehr in Germany. 145 locomotives were built between 1996 and 1999 to replace the 30-year-old and aging Class 103 as the flagship of the Deutsche Bahn, primarily hauling Intercity services. This class encompasses the latest generation of locomotives of the Deutsche Bahn.
Pontedera is an Italian comune with a population of 29,270 inhabitants, located in the province of Pisa, Tuscany, central Italy.
The FS E.636 is a class of Italian articulated electric locomotives. They were introduced in the course of the 1940s until the 1960s, and have been decommissioned since 2006. They have been one of the most numerous Italian locomotive groups, and have been widely employed during their long career, hauling every type of train, ranging from freight to long range passenger services. Their introduction also saw the employment of some revolutionary design concepts, such as the articulated carbody and the three bogies scheme.
The FS E.632 and E.633 are two classes of Italian railways electric locomotives. They were introduced in the course of the 1980s.
The SNCF Class BB 60000 are a class of 4 axle heavy shunting and light freight diesel–electric locomotives built at the Vossloh España works in Valencia. Since the class is primarily used as a freight locomotive the class is commonly referred to as SNCF BB 460000.
The Class 13 are a type of mixed use 200 km/h (124 mph) multivoltage electric locomotive of type Traxis designed by Alstom in the late 1990s for the Belgian and Luxembourgish railways.
The SNCF Class BB 36000 locomotives are a class of triple voltage 4 axle twin bogie electric locomotives built by GEC-Alsthom between 1996 and 2001 for SNCF.
E.402A/B is a class of electric locomotives mainly used on medium speed passenger trains by the Italian railway company FS Trenitalia.
Škoda 15T is a 100% low-floor multiple-unit tram developed by VUKV a.s. and built by Škoda Transportation in Pilsen for the Prague tram network. It was a successor to the Škoda 14 T, featuring articulated bogies and more power to correct for problems found during the operation of the 14 T. The 15T has articulated bogies at either end of the train, and Jacobs bogies between the segments. The tram has two double-doors in each segment to allow fast boarding of passengers, and one extra side door leading to the driver's cabin.
The Genoa–Pisa railway is one of the trunk lines of the Italian railway network. It runs along the Ligurian coast from Genoa to Pisa through the Riviera di Levante and the Versilia. It passes through the cities of Massa, Carrara and La Spezia. South of Pisa the Pisa–Rome line continues along the Tyrrhenian coast to Rome. The line is double track and is fully electrified at 3,000 V DC. Passenger traffic is managed by Trenitalia.
The South African Railways Class 6E of 1970 was an electric locomotive.
The South African Railways Class 7E is an electric locomotive. South African Railways placed 100 Class 7E electric locomotives with a Co-Co wheel arrangement in service in 1978/79. They were the first 25 kV AC locomotives to enter service in South Africa.
The Spoornet Class 10E1, Series 2 of 1990 is a South African electric locomotive.
The South African Railways Class 12E of 1983 was an electric locomotive.
The Spoornet Class 18E, Series 1 of 2000 is a South African electric locomotive.
The EP20 (ЭП20) is a type of 6 axle Bo'Bo'Bo' electric passenger locomotive being built for Russian Railways by Transmashholding's Novocherkassk Electric Locomotive Plant. The locomotive was designed by TRTrans, a joint venture between Transmashholding and Alstom.
The Indian locomotive class WCAM-2 is a class of dual-power AC/DC series electric locomotives that was developed in 1995 by Bharat Heavy Electricals Limited used in the Indian Railways system. They are the second locomotive from the WCAM class. The model name stands for broad gauge (W), DC Current (C), AC Current (A), Mixed traffic (M) locomotive, 2nd generation (2). They entered service in 1995. A total of 20 WCAM-2 were built at BHEL between 1995 and 1996, which made them the most numerous class of mainline dual-power AC-DC electric locomotive. They use the same motors as WCAM 1 but with different circuitry and gearing. They are operational in routes around Mumbai. MU operation was possible with 3 units. WCAM-2P was the passenger-oriented version of the WCAM-2 class. However, they perform better than the WCAM 1 series. Same as WCAM 1 class they also performed poorly in DC mode compared to AC mode. They were also used for hauling trains away from the DC section of suburban trains to AC section and performed the same task as the WCAM-1 did. WCAM-2 locos had the same traction motors, as the WCAM-1 locos, but different circuitry and gearing. The bogies are somewhat different from those of the WCAM-1 being fabricated trimount Co-Co bogies with secondary suspension. Rated speed 105 km/h in DC mode and 120 km/h in AC mode.. Almost all of these were dual-braked, but all are now equipped with air brakes only. All the WCAM-1's and -2's were homed at Valsad shed in Gujarat. Many of CR's WCAM-2 locos were not used much in DC zones as they delivered very poor performance in DC mode and on CR's heavy grades. Although these locos have the same traction motors as the WAM 4 and WCAM 1, the power output from the WCAM-2 locos is higher than for the WAM-4 and WCAM-1 because in those models the traction motors were underfed and did not yield their potential maximum power. Under AC traction, the WCAM-2 locos operate with all six motors in parallel, while in DC mode they also operate in the all-series and series-parallel configurations. Recent WCAM-2's from BHEL, including the passenger-specific version WCAM-2P, were rated 2916 hp in DC mode and 4715 hp in AC mode. These were used by WR and CR for fast trains, running at up to 120 km/h. CR had tried the WCAM-2 and WCAM-2P units but found them usable only with speed restrictions. Some WCAM-2P units had only air brakes. With the WCAM-2 locos, MU operation was possible with up to 3 (4?) units. Some (all?) of the WCAM-2 locos were originally leased to IR, ownership remaining with BHEL, the manufacturers.
The ALe 582 is an Italian electric multiple unit train designed for commuter and medium-distance services, developed in the mid-1980s to replace pre-war and immediately post-war EMUs and locomotive-hauled trains on various lines in Sicily and Southern Italy, although they later diffused on the whole FS network. They're part of the "ALe Elettroniche" or "G.A.I." family, together with their predecessors ALe 724 and their successors, the ALe 642.
The Parma–La Spezia railway is the railway line that connects Parma, Italy with the Genoa–Pisa railway near La Spezia over the Cisa Pass through the Apennines. The route is approximately 120 kilometres long. Its Italian name derives from the town of Pontremoli, one of the main towns it passes through.
Media related to FS ALe 642 at Wikimedia Commons