Frecciarossa 1000 | |
---|---|
Manufacturer | Hitachi Rail Italy (sole constructor from 2021) [lower-alpha 1] electric motors from Alstom Trápaga [1] |
Designer | Mike Robinson [2] and Bertone |
Built at | Pistoia (Hitachi Rail Italy) AnsaldoBreda ; Vado Ligure (Bombardier Italy) |
Family name | ETR 1000 (IT), Serie 109 (ES), commercial Frecciarossa 1000 |
Constructed | 2013–present |
Entered service | from 2015 |
Number under construction | 14 (ordered), 23 (optional) [3] |
Number built | 50 [4] (1 out of service, damaged in Livraga derailment on 6 February 2020) |
Formation | 4M4T; 1 Executive car, 1 Business car, 1 Business car with a bar-bistro, 1 Premium car, 4 Standard cars. |
Capacity | 457 (Executive, 10; Business, 69; Premium, 76; Standard, 300; and wheelchair, 2) [5] |
Operators | Trenitalia Iryo |
Lines served |
|
Specifications | |
Car body construction | Aluminium alloy |
Train length | 202 m (662 ft 9 in) |
Width | 2,924 mm (9 ft 7.1 in) |
Height | 4,080 mm (13 ft 5 in) |
Floor height | 1,240 mm (49 in) |
Doors | 28 (total) |
Wheel diameter | 920 mm (36 in) |
Maximum speed | |
Weight | 500 t (490 long tons; 550 short tons) |
Axle load | 17 t (17 long tons; 19 short tons) |
Traction system | Water-cooled IGBT–VVVF inverter control |
Traction motors | 16 × 3-phase AC induction motor |
Power output | 9,800–10,000 kW (13,100–13,400 hp) |
Tractive effort | 370 kN (83,000 lbf) |
Acceleration | 0.7 m/s/s (1.6 mph/s) |
Deceleration | 1.2 m/s/s (2.7 mph/s) |
Electric system(s) | 25 kV 50 Hz AC, 15 kV 16+2⁄3 Hz AC (installed, but not active), 3 kV DC, 1,500 V DC overhead catenary |
Current collector(s) | Pantograph |
UIC classification | Bo′Bo′+2′2′+Bo′Bo′+2′2′+2′2′+Bo′Bo′+2′2′+Bo′Bo′ |
Braking system(s) | Regenerative, dynamic, electro-pneumatic |
Safety system(s) | ERTMS, ETCS, SCMT, ASFA, LZB |
Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
Notes/references | |
Sources: [8] [9] |
The Frecciarossa 1000 [10] [11] [12] [13] is a high-speed train operated by Italian state railway operator Trenitalia and the private Spanish high-speed rail operator Iryo. It was co-developed as a joint venture between Italian rail manufacturer Hitachi Rail Italy (initially AnsaldoBreda) and multinational conglomerate Alstom (initially Bombardier Transportation). Both design and production work were divided between the two partner companies.
Design work on the train began in 2008, with considerable design work performed by Mike Robinson [2] and Bertone. It was heavily based on existing products, including Bombardier's Zefiro and AnsaldoBreda's V250 trains. The design was modified to conform with the requirements of the Trenitalia tender. In 2010, the Frecciarossa 1000 was selected and a total of 50 trainsets were ordered to meet Trenitalia's needs. Upon the public unveiling of the first example of the type, it was hailed as being the fastest train to reach series production in Europe at that time. [14]
During the mid 2000s, Italian state railway operator Ferrovie dello Stato became increasingly interested in the acquisition of a new very-high-speed train for its Eurostar Alta Velocità Frecciarossa (Eurostar high speed Red Arrow) services along the Turin-Milan-Florence-Rome-Naples corridor. [15] Having become aware of this interest, Italian rail manufacturer AnsaldoBreda and multinational conglomerate Bombardier Transportation decided to partner up to produce a suitable train in 2008. It was decided to centralise design work by the joint venture at a single location, working out of an office at Bombardier's manufacturing plant at Hennigsdorf. [15]
The emergent design was a 200-metre (656 ft 2 in)-long eight car non-articulated single decker train with distributed traction, capable of reaching a maximum speed of 350 km/h (220 mph); it was heavily based on elements of Bombardier's Zefiro and AnsaldoBreda's existing V250 designs. [16] According to rail industry publication Rail Engineer, Bombardier personnel were responsible for conducting the concept and detailed design phases of development, as well as for the provision of propulsion equipment and bogies, homologation efforts, testing, and the commissioning of the first five trains. Meanwhile, AnsaldoBreda developed the train's industrial design, including body, interior, signalling and other systems, in addition to performing the final assembly and commissioning of series production trains. Both firms were involved in detail design and engineering activity. [15]
Italian vehicle manufacturer and design company Gruppo Bertone was involved in the designing of the train's aesthetics and appearance. [15] It was instructed to produce a style that accentuated its elegance and speed, but would also conform with various international railway standards, such as driver visibility, crash protection, and headlight functionality. Bertone's design was reviewed by the team and subject to various tests, including the use of a wind tunnel, which proved it to produce compliant drag coefficients and crosswind stability levels. [15] The train's design includes an active suspension system. [15]
Having been deemed suitable for presentation, the vehicle design, which had been formally designated as the Zefiro 300, was submitted by the joint venture as a response to Ferrovie dello Stato's tender for 50 new high-speed trainsets. [15] Initial specifications were for a train meeting European high-speed technical standards, with a design commercial speed of 360 km/h (225 mph), initially operated at 300 km/h (190 mph), and to be tested to 400 km/h (250 mph). [16] Other requirements included the train being suitable for a condition-based maintenance programme, while it was capable of being operated across seven different European countries, specifically the railway systems of Austria, Belgium, France, Germany, Netherlands, Spain and Switzerland. [15] [17]
The maximum speed specified by the tender exceeded that of the initial design, thus the design team was reassembled by AnsaldoBreda's Pistoia facility for a period of six months to revise the design to comply with the requirements outlaid. [15] Reportedly, the new top speed required a detailed reexamination of the design, and in some cases the redesign, to be performed for various elements of the train, including the bogies, power and control systems and pantograph. While the train was to only fitted with ERTMS Level 2 and the legacy Italian signalling system, passive provisions also had to be found for a number of other signalling systems that had been listed in the requirement. [15]
During August 2010, it was announced that Trenitalia had awarded the contract to the Bombardier/Ansaldo joint venture, and that the first example was set to come into revenue service during 2013. [15] The bid was determined to have been less expensive at €30.8m per train than the €35m per train cost given by the other bidder, French manufacturer Alstom. The contract value was €1.54bn of which Bombardier's share was €654m. [18] [19] Marco Sacchi, Hitachi Rail Italy's head of engineering, attributed the outcome as having been a result of the specially-developed solutions involved in the train's design that had gained Trenitalia's favour. The joint venture moved into the detailed design phase immediately following news of the selection. [15]
During August 2012, a full-scale mock up of the train was publicly unveiled at Rimini by the Italian Prime Minister Mario Monti. [15] [20] By this point, the train has received its official service designation, the 'Frecciarossa 1000'. On 26 March 2013, the first trainset was unveiled during a public ceremony at the Ansaldo-Breda facilities in Pistoia; this train was formally named Pietro Mennea , in memory of the Italian world record holder of the 200 metres track sprint event from 1979 to 1996, who had died five days earlier. [15]
The train underwent extensive testing to be certified to operate on the Italian high-speed rail network at 360 km/h (225 mph). During August 2013, testing commenced on the Genoa-Savona line, before being transferred to conducting night time runs held between Milan and Bologna. [15] On 25 April 2015, it was announced that the testing phase of development had been successfully completed. To mark the occasion, a special inaugural service featuring various high-profile guests, including the president of Italy, Sergio Mattarella, was performed between Milan and Rome. [15] [21]
During June 2015, commercial services using the type commenced, having officially entered service for Expo 2015. [22] According to Bombardier, following the first three months of service, Trenitalia had reported back to them that they had experienced the easiest introduction of a new train into service in their history with the type, and that it had attained all of its reliability targets. [15] The number of services performed by the type have gradually expanded as further examples have been delivered from the assembly line; as of September 2016, a total of 36 trains were in revenue service. At one point, trains were reportedly leaving the factory at the rate of two per week. [15]
The introduction of the ETR 1000 shall enable Trenitalia to redeploy its existing ETR 500 high-speed trains onto other routes, such as Milan – Venice and the Adriatic coast. [23] Early on, it was also declared by FS president Marcello Messori that the Frecciarossa 1000 enables Trenitalia to compete in the international high-speed market, and that it would be approved for operation in France, Germany, Spain, Austria, Switzerland, the Netherlands, and Belgium. [21] On 28 October 2015, Trenitalia acknowledged that it was holding preliminary discussions between its suppliers and regulatory bodies regarding its interest in the prospective launch of an open access high speed service between Paris and Brussels; Pietro Diamantini of FS Group's Passenger Division stated that it could be the first international corridor on which the ETR 1000-Frecciarossa would be deployed. [24]
On 26 November 2015, it was reported that one of the ETR 1000-Frecciarossa eight-car sets reached 389 km/h (242 mph) during testing; however, under normal initial conditions, the trains will be limited to 300 km/h (190 mph) as this remains the maximum permitted speed on the Italian high-speed network. [23] On 26 February 2016, a Frecciarossa 1000 reportedly attained a peak speed of 393.8 km/h (245 mph) while traversing the Torino-Milano high speed line. [25] On 28 May 2018, the Italian Ministry of Infrastructure and Transport and the ANSF announced that no further tests will be carried out and the speed limit of 300 km/h (190 mph) will not be raised. [26]
After applying for French approval in 2019, Frecciarossa 1000 services between Paris and Milan began in December 2021. [27] [28]
In 2022, the Spanish railway company Iryo (owned by ILSA, Intermodalidad de Levante S.A.) began service, having ordered a fleet of twenty S 109 trainsets similar to the Italian units ETR 1000-Frecciarossa. [29] However, unlike its Italian counterparts, the Iryo S 109 trainsets does not have an executive class seat.
On 6 February 2020, unit number 21 was involved in a high-speed derailment at Livraga (Lodi), on the Milan-Bologna high-speed line, operating the first service of the day. It caused the death of the two train drivers and the injury of 31 people. [30]
Pendolino is an Italian family of high-speed tilting trains used in Italy, Spain, Germany, Poland, Portugal, Slovenia, Finland, the Czech Republic, Slovakia, the UK, the US, Switzerland, China, and Greece. It was also used in Russia from December 12, 2010 until March 26, 2022. Based on the design of the Italian ETR 401, it was further developed and manufactured by Fiat Ferroviaria, which was taken over by Alstom in 2000.
Trenitalia SpA is the primary train operator of Italy. A subsidiary of Ferrovie dello Stato Italiane, itself partly owned by the Italian government, the company is owned publicly and partly private from a private investors group. It was established in 2000 following a European Union directive on the deregulation of rail transport.
The Italian railway system is one of the most important parts of the infrastructure of Italy, with a total length of 24,567 km (15,265 mi) of which active lines are 16,832 km (10,459 mi). The network has recently grown with the construction of the new high-speed rail network. Italy is a member of the International Union of Railways (UIC). The UIC Country Code for Italy is 83.
Hitachi Rail Italy S.p.A. is a multinational rolling stock manufacturer company based in Pistoia, Italy. Formerly AnsaldoBreda S.p.A., a subsidiary of state-owned Finmeccanica, the company was sold in 2015 to Hitachi Rail of Japan. After the deal was finalized, the current name was adapted in November 2015 to reflect the new ownership.
The Italian railway system is one of the most important parts of the infrastructure of Italy, with a total length of 24,227 km (15,054 mi) as of 2011.
High-speed rail in Italy consists of two lines connecting most of the country's major cities. The first line connects Turin to Salerno via Milan, Bologna, Florence, Rome and Naples, the second runs from Turin to Venice via Milan and Verona, and is under construction in parts. Trains are operated with a top speed of 300 km/h (190 mph).
The ETR 200 is an Italian electric multiple unit (EMU) introduced in 1936.
High-speed rail (HSR) has developed in Europe as an increasingly popular and efficient means of transport. The first high-speed rail lines on the continent, built in the 1970s, 1980s, and 1990s, improved travel times on intra-national corridors.
Nuovo Trasporto Viaggiatori S.p.A. is an Italian open-access train operating company operating in the field of high-speed rail transport under the brand name Italo, stylized as .italo.
The Trenitalia ETR 700, originally NS Hispeed V250, is a high-speed train designed by Pininfarina and built by AnsaldoBreda originally for NS International and NMBS/SNCB to operate on the Fyra service, a high speed train between Amsterdam and Brussels with a branch to Breda on the newly built HSL-Zuid in the Netherlands and its extension HSL 4 in Belgium.
Hitachi, Ltd. Railway Systems Business Unit, trading as Hitachi Rail, is the rolling stock and railway signalling manufacturing division of Hitachi outside Japan.
Zefiro is a family of high-speed passenger trains designed by Bombardier Transportation whose variants have top operating speeds of between 250 km/h (155 mph); 380 km/h (240 mph) and 400 km/h (250 mph).
Frecciarossa is a high-speed train of the Italian national train operator, Trenitalia, as well as a member of the train category Le Frecce. The name was introduced in 2008 after it had previously been known as Eurostar Italia. Frecciarossa trains operate at speeds of up to 300 km/h (190 mph). Frecciarossa is the premier service of Trenitalia and competes with italo, operated by Nuovo Trasporto Viaggiatori. Trenitalia also operates the sister brands Frecciargento and Frecciabianca for slower services.
ETR 500 is a family of Italian high-speed trains built by AnsaldoBreda and introduced in 1993.
Trenitalia France is an open-access train operator running international services between France and Italy. It was originally established under the Thello brand in October 2011.
Frecciargento is a high-speed train of the Italian national train operator, Trenitalia, as one of its Le Frecce brands. The name was introduced in 2012; these trains were previously branded as Eurostar Italia. Frecciargento trains operate at speeds of up to 250 kilometres per hour (155 mph).
Frecciabianca is a high-speed train operated by Trenitalia, Italy's national train operator, and one of its Le Frecce brands, along with Frecciarossa and Frecciargento. Frecciabianca was introduced in 2011, replacing Eurostar Italia. Frecciabianca trains operate at speeds up to 200 km/h (124 mph).
Le Frecce is the high-speed rail train category operated by Trenitalia in Italy under overall three brand names.
The Caravaggio is an electric multiple unit (EMU) developed and built by Hitachi Rail Italy. It is named after the Italian Baroque painter Michelangelo Merisi da Caravaggio.
Luigi Corradi is an Italian businessman, the CEO of Trenitalia since 2020.