Siemens ACS-64

Last updated

Siemens ACS-64
ACS-64 600 Wilmington.jpg
Amtrak ACS-64 No. 600 with the Crescent in 2021
Type and origin
Power typeElectric
Builder Siemens Mobility
Order numberAmtrak: 70
SEPTA: 15 (option for 3 additional)
Build dateAmtrak: 2012–2016
SEPTA: 2015–2018
Specifications
Configuration:
   AAR B-B
   UIC Bo'Bo'
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Trucks Siemens model SF4
Wheel diameter43.98 in (1,117 mm) (new)
40.98 in (1,041 mm) (worn)
Minimum curve 249.3 ft (76 m)
Wheelbase 32 ft 5.8 in (9.9 m)
(bogie center distance)
Length66 ft 8 in (20,320 mm)
Width9 ft 9+12 in (2,984 mm)
Height12 ft 6 in (3,810 mm) (excluding pantograph)
Axle load 54,250 lb (24,610 kg)
Adhesive weight 100%
Loco weight215,537 lb (97,766 kg)
Electric system/s Overhead line;
Current pickup(s) Pantograph
Traction motors 3-phase, AC, fully suspended, Siemens built (Norwood, Ohio)
Head end power 1,000 kW (1,340 hp) 3-phase, 60 Hz, 480 VAC, 1,000 kVA
TransmissionPinion Hollow Shaft Drive w/ Partially Suspended Gearboxes
MU working Yes
Loco brake Regenerative braking, NYAB Electro-Pneumatic Cheek Mounted Disk Brakes
Train brakes Electro-pneumatic [1]
Safety systems FRA standards
ACSES II [2]
Performance figures
Maximum speed125 mph (201 km/h) Service
135 mph (217 km/h) Design [3]
Power output6,400  kW (8,600  hp) Maximum (short-time)
5,000  kW (6,700  hp) Continuous
Tractive effort Starting:
72,000  lbf (320  kN)
Short-time:
61,000  lbf (270  kN) @ 53.5 mph (86 km/h)
26,000  lbf (115  kN) @ 125 mph (200 km/h)
Continuous:
63,000  lbf (282  kN) @ 40 mph (64 km/h)
20,000  lbf (89  kN) @ 125 mph (200 km/h)
Factor of adh. 2.99 (33.4%)
Brakeforce34,000  lbf (150  kN), 6,700 hp (5,000 kW) Maximum [4]
Career
Operators Amtrak, SEPTA
Numbers
NicknamesSprinters
Delivered2013-2018 [5]
First runFebruary 7, 2014 with Amtrak
Sources: [6] except where noted

The Siemens ACS-64, or Amtrak Cities Sprinter, is an electric locomotive designed by Siemens Mobility for use on the Northeast Corridor (NEC) and the Keystone Corridor in the northeastern United States. The design was based on locomotives Siemens created for use in Europe and Asia, but with changes to comply with American standards. The ACS-64 is built at the Siemens factory in Florin, California, located outside of Sacramento.

Contents

The first 70 locomotives were built for Amtrak to replace the railroad's fleet of aging AEM-7 and unreliable HHP-8 locomotives. The first ACS-64 entered service in February 2014 and deliveries continued until August 2016.

The Southeastern Pennsylvania Transportation Authority in Southeastern Pennsylvania operates a fleet of 15 ACS-64s since August 2018, on the agency's Regional Rail Lines.

Design

Amtrak ACS-64 No. 601, testing at Transportation Technology Center on June 8, 2013. 601 was later involved in the 2015 Philadelphia train derailment. Amtrak ACS-64 601.jpg
Amtrak ACS-64 No. 601, testing at Transportation Technology Center on June 8, 2013. 601 was later involved in the 2015 Philadelphia train derailment.

The design is based on the EuroSprinter and the Vectron platforms, which Siemens sells in Europe and Asia. [7] Significant structural changes to the design were made to comply with American crashworthiness requirements, including the addition of crumple zones and anti-climbing features as well as structural strengthening of the cab, resulting in a heavier locomotive than the previous models. [5] [2] The body is a monocoque structure with integral frames and sidewalls. [2]

The locomotives are able to operate from the 25 kV 60 Hz, 12.5 kV 60 Hz, and 12 kV 25 Hz power supplies used on the Northeast Corridor, and have a maximum power of 6,400 kilowatts (8,600 hp). [7] The locomotives are designed to be capable of accelerating 18 Amfleet cars to maximum speeds as high as 125 mph (201 km/h) on the Northeast Corridor in a little over eight minutes, [8] with trains of eight Amfleets taking two and a half minutes to reach the same speed. [9] They had advanced safety systems, including specialized couplers designed to keep trains from rolling over, jackknifing, or derailing during a collision. [10] Additionally, the new locomotives are more energy-efficient than those that they replace, and lack dynamic braking grids in favor of 100% regenerative braking, depending on grid receptiveness. Energy generated from the brake may also be used to meet HEP needs, further reducing current draw from the grid. [10]

Each locomotive has two electrical converter units with three IGBT based, water cooled output inverters per converter. Two of the inverters power the traction motors; the third unit supplies head-end and auxiliary power. [2] The HEP/auxiliary inverters are dual-redundant and identical (rated 1,000 kW or 1,300 hp), allowing the locomotive to remain in service should one inverter fail en route. [8] The locomotive bogies are fabricated steel designs, with low-lying traction links and center pivot pin. The traction motors are frame-mounted, with torque transmitted via a hollow shaft drive. Locomotive braking is facilitated by cheek mounted disc brakes on each wheel. [2]

The locomotives are compliant with the "Buy America Act" and were assembled at the Siemens factory in Florin, California, with traction and electrical equipment being manufactured at Siemens facilities in Norcross and Alpharetta, Georgia. [5] Traction inverters were manufactured in Alpharetta, and the traction motors and gear units were manufactured in Norwood, Ohio. [4]

Amtrak

Procurement

In October 2010, Amtrak ordered 70 locomotives at a cost of US$466 million, to be delivered beginning in February 2013. [3] The order was the second part of Amtrak's company-wide fleet-replacement program, after an order for 130 Viewliner II passenger cars was placed in July 2010. On June 30, 2011, US Secretary of Transportation Ray LaHood announced that Amtrak had received a $562.9 million loan from the federal government's Railroad Rehabilitation and Improvement Financing program for the new locomotives. [11] The additional funding over and above the $466 million will cover capital spare parts and facility improvements to accommodate the ACS-64s.

Amtrak and Siemens Mobility unveiled the first three completed locomotives on May 13, 2013. They were tested during the summer of 2013: Nos. 600 and 601 at the Transportation Technology Center in Pueblo, Colorado, and No. 602 on the NEC. [12] [13]

Then-Vice President Joe Biden sits at the controls of ACS-64 No. 600 at a publicity event on February 6, 2014 Cities Sprinter cab.jpg
Then-Vice President Joe Biden sits at the controls of ACS-64 No. 600 at a publicity event on February 6, 2014

On February 6, 2014, then-Vice President Joe Biden visited 30th Street Station in Philadelphia to tour ACS-64 #600. In his subsequent remarks he stressed the importance of infrastructure investment as well as the important role Amtrak's new locomotives will play in serving the critical artery of the Northeast Corridor. [14]

Amtrak and Siemens celebrated the completion of the last ACS-64, No. 670, in Florin, California, on June 2, 2016. [15] The celebration concluded with unit No. 670 being towed by Amtrak CEO Joe Boardman's train bound for Washington, D.C. [ citation needed ] Locomotive No. 670 entered service in August 2016, completing the acceptance of the Amtrak order. [16]

Service

Amtrak ACS-64 No. 600 leading its first revenue trip on February 7, 2014 ACS-64 first revenue run approaching Readville.JPG
Amtrak ACS-64 No. 600 leading its first revenue trip on February 7, 2014

Unit 600 entered service on February 7, 2014, on Northeast Regional train 171 from Boston to Washington, D.C. [17] As the new locomotives entered service, they gradually displaced the electric locomotives that Amtrak had previously operated. The extra six ACS-64 units were to be used to increase the number of locomotives available for use at any point, and to add more frequent service in the future. [18] The final unit, #670, was delivered from Siemens on June 2, 2016, [15] and entered revenue service in August of the same year. [16]

SEPTA

SEPTA ACS-64 910 leads a train out of Hatboro station SEPTA ACS-64 910 inbound departing Hatboro Station.jpeg
SEPTA ACS-64 910 leads a train out of Hatboro station

In May 2015, SEPTA (Philadelphia's mass-transit authority) approved an initial order for 13 ACS-64 locomotives for commuter service to replace its 7 AEM-7 and single ALP-44 locomotives on push-pull express trains, with an option for an additional five locomotives to be added to the order. On November 11, 2015, Siemens announced that it was awarded the $118 million contract for the initial 13 locomotives. [19] [20] The total contract value, including the option for additional locomotives, is worth $154 million. [21] [22] [23]

On February 29, 2016, Amtrak unit 664 began test runs on SEPTA Regional Rail branches to test the height of the locomotives on SEPTA territory, and to ensure clearance through the Center City Tunnel. [24] After testing the unit on most of SEPTA's lines, it was returned to Amtrak on March 21, 2016, for completion of its acceptance testing. [25] From July 2016 until April 2017, SEPTA leased several ACS-64 units to pull five Amfleet cars and several MARC Train sets as emergency rolling stock after all Silverliner V cars were temporarily pulled from service. [26]

SEPTA's first ACS-64 was delivered on December 14, 2017, by which time SEPTA had increased its order to 15 locomotives. [27] [28] [29] The first unit entered service on the Paoli/Thorndale Line on July 11, 2018. [30]

Related Research Articles

<i>Maple Leaf</i> (train) International passenger train operated by Amtrak and Via Rail

The Maple Leaf is an international passenger train service operated by Amtrak and Via Rail between New York Penn Station in New York City and Union Station in Toronto via the Empire Corridor. Daily service is offered in both directions; the 544-mile (875 km) trip takes approximately 12 hours, including two hours for U.S. or Canadian customs and immigration inspection at either Niagara Falls, New York, or Niagara Falls, Ontario. Although the train uses Amtrak rolling stock exclusively, the train is operated by Via Rail crews while in Canada and by Amtrak crews in the United States. Service began in 1981.

<i>Northeast Regional</i> Amtrak northeastern U.S. intercity rail service

The Northeast Regional is an intercity rail service operated by Amtrak in the Northeastern and Mid-Atlantic United States. In the past it has been known as the NortheastDirect, Acela Regional, or Regional. It is Amtrak's busiest route, carrying 9,163,082 passengers in fiscal year (FY) 2023. The Northeast Regional service earned over $787.7 million in gross ticket revenue in FY 2023.

<span class="mw-page-title-main">EMD AEM-7</span> Twin-cab four-axle 7,000 hp (5.2 MW) B-B electric locomotive built by Electro-Motive Division

The EMD AEM-7 is a twin-cab four-axle 7,000 hp (5.2 MW) B-B electric locomotive built by Electro-Motive Division (EMD) and ASEA between 1978 and 1988. The locomotive is a derivative of the Swedish SJ Rc4 designed for passenger service in the United States. The primary customer was Amtrak, which bought 54 for use on the Northeast Corridor and Keystone Corridor. Two commuter operators, MARC and SEPTA, also purchased locomotives, for a total of 65.

<i>Metroliner</i> (train) Former express train between Washington, D.C., and New York City

The Metroliners were extra-fare high-speed trains between Washington, D.C., and New York City which operated from 1969 to 2006. They were briefly first operated by Penn Central Transportation, then by Amtrak for 35 years.

<i>Keystone Service</i> Amtrak service in Pennsylvania

The Keystone Service is a 195 mile regional passenger train service from Amtrak between the Harrisburg Transportation Center in Harrisburg, Pennsylvania, and 30th Street Station in Philadelphia, running along the Philadelphia to Harrisburg Main Line. Most trains continue along the Northeast Corridor (NEC) to Penn Station in New York City.

<i>Pennsylvanian</i> (train) Amtrak service between Pittsburgh, PA and New York City, NY

The Pennsylvanian is a 444-mile (715 km) daily daytime Amtrak train running between New York City and Pittsburgh via Philadelphia. The trains travel across the Appalachian Mountains, through Pennsylvania's capital Harrisburg, the Pennsylvania Dutch Country, suburban and central Philadelphia, and New Jersey en route to New York. The entire train ride takes about 9 hours total: 1.5 hours between New York and Philadelphia, 2 hours between Philadelphia and Harrisburg, and 5.5 hours between Harrisburg and Pittsburgh.

<span class="mw-page-title-main">GE Genesis</span> Series of locomotives

General Electric Genesis is a series of passenger diesel locomotives produced by GE Transportation, then a subsidiary of General Electric. Between 1992 and 2001, a total of 321 units were built for Amtrak, Metro-North, and Via Rail.

<i>Silver Star</i> (Amtrak train) Amtrak service between New York and Florida

The Silver Star is a long-distance passenger train operated by Amtrak on a 1,522-mile (2,449 km) route between New York City and Miami via Washington, D.C., Richmond, Virginia, Raleigh, North Carolina, Columbia, South Carolina, Savannah, Georgia, Jacksonville, Florida, and Tampa, Florida. The Silver Star and its sister train in the Silver Service brand, the Silver Meteor, are the descendants of numerous long-distance trains that operated between Florida and New York for most of the 20th century.

<i>Palmetto</i> (train) Amtrak service between New York City, NY and Savannah, GA

The Palmetto is a passenger train operated by Amtrak on a 829-mile (1,334 km) route between New York City and Savannah, Georgia, via the Northeast Corridor, Washington, D.C., Richmond, Virginia, Fayetteville, North Carolina, and Charleston, South Carolina. The Palmetto is a shorter version of the Silver Meteor, which continues south to Miami, Florida. From 1996 to 2002 this service was called the Silver Palm. Although currently a day train, the Palmetto is considered a long-distance train by Amtrak and previously provided overnight sleeper service to Florida.

<span class="mw-page-title-main">Bombardier–Alstom HHP-8</span> French-Canadian electric locomotive for American passenger uses

The Bombardier–Alstom HHP-8 is a type of twin-cab electric locomotive manufactured by a consortium of Bombardier Transportation and Alstom for Amtrak and MARC. The locomotive's electrical drive technology is directly derived from the SNCF BB 36000 manufactured by Alstom.

<span class="mw-page-title-main">Amtrak paint schemes</span> History of paint schemes applied to Amtrak locomotives and rail cars

Amtrak has used a variety of paint schemes (liveries) on its rolling stock since taking over intercity passenger rail service in the United States in 1971. A series of seven schemes termed Phases, first introduced in 1972, have seen the widest use. Phases primarily use geometric arrangements of red, white, and blue—the national colors of the United States—part of Amtrak's patriotic visual identity.

<span class="mw-page-title-main">Amfleet</span> Class of American passenger railroad cars

Amfleet is a fleet of single-level intercity railroad passenger cars built by the Budd Company for American company Amtrak in the late 1970s and early 1980s. Budd based the Amfleet design on its earlier Metroliner electric multiple unit. An initial order for 57 cars in 1973 to supplement the Metroliners on the Northeast Corridor grew to two orders totaling 642 cars, sufficient to reequip all the services on the Northeast Corridor and many other routes around the United States. The first 492 cars, known as Amfleet I and completed between 1975 and 1977, were designed for short-distance service. A second order of 150 cars, known as Amfleet II and completed between 1980 and 1983, were designed for long-distance service. They were the last intercity passenger cars built by Budd.

<span class="mw-page-title-main">Trenton Line</span> SEPTA Regional Rail system line

The Trenton Line is a route of the SEPTA Regional Rail system. The route serves the northeastern suburbs of Philadelphia, Pennsylvania with service in Bucks County along the Delaware River to Trenton, New Jersey.

<span class="mw-page-title-main">ABB ALP-44</span> Swedish/US electric locomotive class

The ABB ALP-44 was an electric locomotive which was built by Asea Brown Boveri of Sweden between 1989 and 1997 for the New Jersey Transit and SEPTA railway lines.

<span class="mw-page-title-main">Pioneer III</span>

The Pioneer III railcar was a short/medium-distance coach designed and built by the Budd Company in 1956 with an emphasis on weight savings. A single prototype was built, but declines in rail passenger traffic resulted in a lack of orders so Budd re-designed the concept as an electric multiple unit (m.u.). Six of the EMU coach design were purchased by the Pennsylvania Railroad with the intention of using them as a high-speed self-contained coach that could be used for long-distance commuter or short-distance intercity travel in the Northeast U.S. The 6 production Pioneer III units were the first all-stainless-steel-bodied EMU railcar built in North America and, at 90,000 pounds (41,000 kg), the lightest.

<span class="mw-page-title-main">EuroSprinter</span> Family of electric locomotives

The EuroSprinter family of electric locomotives is a modular concept of locomotives for the European market built by Siemens Mobility. The internal Siemens product name is ES 64, with ES for EuroSprinter and the number 64 indicating the 6,400 kW power at rail.

<span class="mw-page-title-main">Budd Metroliner</span> Retired high-speed train

The Budd Metroliner was a class of American electric multiple unit (EMU) railcar designed for first-class, high-speed service between New York City and Washington, D.C., on the Northeast Corridor. They were designed for operation up to 150 miles per hour (240 km/h): what would have been the first high speed rail service in the Western Hemisphere. Although 164 mph (264 km/h) was reached during test runs, track conditions and electrical issues limited top speeds to 120 mph (190 km/h) in revenue service. The single-ended units were designed to be arranged in two-car sets, which were in turn coupled into four to eight-car trains.

<span class="mw-page-title-main">Paoli/Thorndale Line</span> SEPTA Regional Rail service from Philadelphia to Thorndale

The Paoli/Thorndale Line, commonly known as the Main Line, is a SEPTA Regional Rail service running from Center City Philadelphia through Montgomery County and Delaware County to Thorndale in Chester County. It operates along the far eastern leg of Amtrak's Philadelphia to Harrisburg Main Line, which in turn was once the Main Line of the Pennsylvania Railroad and is now part of the Keystone Corridor, a federally-designated high-speed rail corridor.

<span class="mw-page-title-main">Siemens Charger</span> North American diesel-electric passenger locomotive

The Siemens Charger is a family of diesel-electric/dual-mode passenger locomotives designed and manufactured by Siemens Mobility for the North American market.

References

  1. Amtrak (February 15, 2011). "PRIIA Specifications for single level cars" (PDF). Retrieved November 4, 2013.
  2. 1 2 3 4 5 Latour, Michael (September 2011). "A new face in the Northeast Corridor". Railway Gazette International . Vol. 167, no. 9. Archived from the original on July 4, 2015.
  3. 1 2 "Siemens AG bags $466-mn order from US railroad company Amtrak". domain-b.com. October 29, 2010. Retrieved November 4, 2013.
  4. 1 2 "ACS-64 Info Graphic and Fact Sheet" (PDF). Siemens. Retrieved March 10, 2018.
  5. 1 2 3 "Amtrak orders Siemens 200 km/h Cities Sprinter locomotives". Railway Gazette International . October 29, 2010. Retrieved October 30, 2010.
  6. "Amtrak City Sprinter Class ACS64 Electric Locomotive For Amtrak's North East Corridor (NEC) High Speed Passenger Service" (PDF). Siemens AG Infrastructure & Cities Sector Rail Systems Division. Archived from the original (PDF) on February 13, 2014. Retrieved December 24, 2013.
  7. 1 2 "Siemens breaks into the U.S. long-distance passenger rail market" (PDF) (Press release). Siemens. October 29, 2010. Retrieved October 30, 2010.
  8. 1 2 Michael Latour (June 2011). "Amtrak ACS-64: Speed, power, efficiency". Railway Age. Archived from the original on April 26, 2012. Retrieved June 11, 2011.
  9. "In-cab video of 601 + 8 Amfleets performing an acceleration test at Pueblo, CO". Youtube.com. August 1, 2013. Archived from the original on December 21, 2021.
  10. 1 2 "Amtrak orders 70 new electric locomotives from Siemens". Trains. October 29, 2010. Archived from the original on November 29, 2019. Retrieved October 30, 2010.
  11. "Amtrak receives $562.9m loan to purchase 70 locomotives for Northeast Corridor". Rail.co. June 30, 2011. Archived from the original on March 20, 2012. Retrieved July 1, 2011.
  12. Siemens USA. "Siemens Provides First Look at New Amtrak Locomotives". Synaptic Digital. Archived from the original on March 9, 2021. Retrieved November 4, 2013.
  13. "New Amtrak Locomotives Advancing in Rigorous Testing Program" (Press release). Amtrak. July 29, 2013. Archived from the original on May 17, 2021. Retrieved March 10, 2018.
  14. Matheson, Kathy (February 6, 2014). "Biden stresses infrastructure investment in Philly". Associated Press. Archived from the original on February 21, 2014. Retrieved February 25, 2014.
  15. 1 2 "Siemens completes 70th ACS-64 locomotive for Amtrak". Progressive Railroading. June 2, 2016. Retrieved June 3, 2016.
  16. 1 2 "ACS-64 Locomotives Usher in New Era of Mobility on Northeast Corridor". All Aboard: The Official Blog of Amtrak (Press release). Amtrak. August 2016.
  17. "New Amtrak Locomotives Ready for Service and Set to Power Northeast Economy" (Press release). Amtrak. February 6, 2014. Archived from the original on February 27, 2021. Retrieved March 10, 2018.
  18. "Amtrak contracts Siemens to supply 70 electric locomotives". Progressive Railroading. October 29, 2010. Retrieved October 29, 2010.
  19. Worrell, Carolina (November 11, 2015). "Siemens to build new locomotives for SEPTA". www.railwayage.com.
  20. Siemens USA (November 11, 2015). "Siemens to build 13 electric locomotives for the Southeastern Pennsylvania Transportation Authority".
  21. Dan, McQuade (November 11, 2015). "SEPTA Is Buying 13 New Locomotives for $113 Million". Philadelphia Magazine. Retrieved December 6, 2017.
  22. Nussbaum, Paul (May 27, 2015). "SEPTA plans to spend $154 million on new locomotives". The Philadelphia Inquirer . Retrieved May 29, 2015.
  23. "May 2015 Special Agenda" (PDF). Southeastern Pennsylvania Transportation Authority. May 2015. Archived from the original (PDF) on June 18, 2021. Retrieved July 3, 2015.
  24. "SEPTA testing an ACS-64 in March" . Trains News Wire. March 1, 2016.
  25. "Railfan Pictures of the Week - 3/27/2016". The Philadelphia Chapter of the National Railway Historical Society. March 27, 2016. Archived from the original on April 11, 2016.
  26. Smith, Sandy (July 8, 2016). "SEPTA to Add 1,700 Regional Rail Seats Starting Monday". Philadelphia Magazine. Retrieved July 19, 2016.
  27. "Siemens delivers new locomotives to Baltimore, Philadelphia agencies". Progressive Railroading. December 18, 2017. Retrieved March 12, 2018.
  28. "Siemens ships first ACS-64 locomotive for SEPTA". Railway Age. December 7, 2017. Retrieved March 12, 2018.
  29. "SEPTA's first new electric locomotive has pulled into Philly". Curbed Philadelphia. December 15, 2017. Retrieved January 30, 2018.
  30. Gambardello, Joseph A. (July 11, 2018). "SEPTA's new Regional Rail locomotive makes debut". The Philadelphia Inquirer .

Further reading

Commons-logo.svg Media related to Siemens ACS-64 locomotives at Wikimedia Commons