| GE P30CH | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Amtrak #712 in Southern Pacific service on the Peninsula Commute in 1978. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sources: [1] | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The GE P30CH was one of the first brand-new diesel-electric locomotives built for Amtrak by General Electric during Amtrak's early years. The design was based on the GE U30C, but had a cowl carbody like its EMD competitors. Amtrak operated them between 1975 and 1992.
Amtrak ordered 25 P30CHs in 1974, following up on its order of 40 EMD SDP40Fs in 1973. The designation "P30CH" stood for the following: "P" for passenger service, "30" for the 3,000 horsepower V16 GE 7FDL diesel engine, "C" for C-C wheel arrangement, and "H" for head-end power. This designation led to the units being nicknamed "Pooch".
The P30CH was the first Amtrak diesel locomotive built from the factory to offer HEP (head end power) in the form of 2 Detroit Diesel generator sets, each rated at 375 kW for a combined total of 750 kW.
The six-axle P30CHs, which cost Amtrak $480,000 each, [2] : 105 were plagued with mechanical problems and were never very popular with crews or Amtrak management. In the mid-1970s Amtrak moved away from six-axle designs in favor of four-axle units; four-axle locomotives could better handle routes with numerous curves. [3] : 34 Ultimately the four-axle EMD F40PHs quickly began to supersede the P30CHs soon after their introduction by Amtrak.
Amtrak leased fifteen to the Southern Pacific Railroad in 1978 for use on the Peninsula Commute between San Francisco and San Jose, California. [4] : 12 Caltrans leased several P30CHs for its abortive Oxnard–Los Angeles "CalTrain" commuter service. [5]
Two units were wrecked prior to official retirement. In 1977, P30CH #713 was involved in a collision [6] with some log trucks. In 1979 P30CH #715 was involved in a collision with an Illinois Central freight train.
In the later years of their Amtrak careers, the locomotives were used regularly into the mid-1980s on the Sunset Limited and Auto Train routes. [2] : 105 With the introduction of the Genesis series and the Dash 8-32BWH series, the P30CHs had their final runs in late 1991; [3] : 34 (with one being sold off for use in safety tests) and all have been presumed scrapped.
GE produced 25 P30CHs, all of which were delivered to Amtrak:[ citation needed ]
| Original Owner | Road Numbers | Quantity | Builder Numbers | Notes |
|---|---|---|---|---|
| Amtrak | 700-724 | 25 | 40694-40718 | 15 units leased to Southern Pacific in 1978. 713 wrecked and retired after a grade crossing accident in 1977. 715 wrecked and retired after being involved in the Harvey, Illinois train collision |
The EMD AEM-7 is a twin-cab four-axle 7,000 hp (5.2 MW) B-B electric locomotive built by Electro-Motive Division (EMD) and ASEA between 1978 and 1988. The locomotive is a derivative of the Swedish SJ Rc4 designed for passenger service in the United States. The primary customer was Amtrak, which bought 54 for use on the Northeast Corridor and Keystone Corridor. Two commuter operators, MARC and SEPTA, also purchased locomotives, for a total of 65.
CalTrain was a short-lived commuter rail system in the Los Angeles area which operated between 1982–1983. It connected downtown Los Angeles's Union Station with Oxnard in Ventura County, using the tracks of the Southern Pacific Railroad. It was the first local rail service in Los Angeles since 1961 and was a forerunner of the modern Metrolink Ventura County Line. Service ended in the face of high costs, lower-than-expected ridership, a changing political climate, and staunch opposition from the Southern Pacific.
The EMD FP45 is a cowl unit type of C-C diesel locomotive produced in the United States by General Motors Electro-Motive Division (EMD). It was produced beginning in 1967 at the request of the Atchison, Topeka and Santa Fe Railway, which did not want its prestigious Super Chief/El Capitan and other passenger trains pulled by freight style hood unit locomotives, which have external walkways.
The GE Genesis is a series of passenger diesel locomotives built by GE Transportation for Amtrak, Metro-North, and Via Rail between 1992 and 2001. A total of 321 units were produced.
A cowl unit is a diesel locomotive with full-width, enclosing bodywork, similar in appearance to the cab unit-style of earlier locomotives, such as the EMD F-units of the 1940s and 1950s. The term cowl unit is of North American origin, although similarly-styled locomotives exist elsewhere.
The EMD F40PH is a four-axle 3,000–3,200 hp (2.2–2.4 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division in several variants from 1975 to 1992. Intended for use on Amtrak's short-haul passenger routes, it became the backbone of Amtrak's diesel fleet after the failure of the EMD SDP40F. The F40PH also found widespread use on commuter railroads in the United States and with VIA Rail in Canada. Additional F40PH variants were manufactured by Morrison-Knudsen and MotivePower between 1988 and 1998, mostly rebuilt from older locomotives.
The AAR wheel arrangement system is a method of classifying locomotive wheel arrangements that was developed by the Association of American Railroads. Essentially a simplification of the European UIC classification, it is widely used in North America to describe diesel and electric locomotives. It is not used for steam locomotives, which use the Whyte notation instead.
The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel–electric locomotive built by EMD from 1972 to 1989.
The SDP45 is a six-axle, C-C, 3,600-horsepower (2,680 kW) diesel-electric locomotive built by General Motors' Electro-Motive Division of La Grange, Illinois. It was a passenger-hauling version of the SD45 on a stretched locomotive frame with an extended, squared-off long hood at the rear, aft of the radiators, giving space for a steam generator for passenger train heating. This steam generator placement followed the pattern set by the SDP35 and SDP40.
The EMD SD50 is a 3,500-horsepower (2,610 kW) diesel-electric locomotive built by General Motors Electro-Motive Division. It was introduced in May 1981 as part of EMD's "50 Series"; production ceased in January 1986. The SD50 was a transitional model between EMD's Dash 2 series which was produced throughout the 1970s and the microprocessor-equipped SD60 and SD70 locomotives. A total of 431 were built.
The EMD F59PH is a four-axle 3,000 hp (2 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division from 1988 to 1994. A variant, the F59PHI, was produced from 1994 to 2001. The F59PH was originally built for GO Transit commuter operation in the Toronto region. Metrolink in Southern California also purchased a fleet for its 1992 launch. The streamlined F59PHI was designed for Amtrak California intercity service. A total of 72 F59PH and 83 F59PHI locomotives were built.
In rail transport, head-end power (HEP), also known as electric train supply (ETS), is the electrical power distribution system on a passenger train. The power source, usually a locomotive at the front or 'head' of a train, provides the electricity used for heating, lighting, electrical and other 'hotel' needs. The maritime equivalent is hotel electric power. A successful attempt by the London, Brighton and South Coast Railway in October 1881 to light the passenger cars on the London to Brighton route heralded the beginning of using electricity to light trains in the world.
The SD45 is a six-axle diesel-electric locomotive class built by General Motors Electro-Motive Division between 1965 and 1971. It has an EMD 645E3 twenty-cylinder engine generating 3,600 hp (2,680 kW) on the same frame as the SD38, SD39, SD40, and SDP40. As of 2023, most SD45s have been retired, scrapped or rebuilt to SD40-2 standards.
The EMD SDP40F is a six-axle 3,000 hp (2.2 MW) C-C diesel–electric locomotive built by General Motors Electro-Motive Division (EMD) from 1973 to 1974. Based on Santa Fe's EMD FP45, EMD built 150 for Amtrak, the operator of most intercity passenger trains in the United States. Amtrak, a private company but funded by the United States government, had begun operation in 1971 with a fleet of aging diesel locomotives inherited from various private railroads. The SDP40F was the first diesel locomotive built new for Amtrak and for a brief time they formed the backbone of the company's long-distance fleet.
The EMD F40C is a 6-axle 3,200 horsepower (2.4 MW) diesel-electric locomotive built by General Motors Electro-Motive Division in 1974 for commuter service in Chicago. EMD only built 15 locomotives; the decline of the 6-axle design for passenger service led to the adoption of the 4-axle EMD F40PH as the standard passenger locomotive in the United States. Along with a small fleet of HEP-equipped EMD SD70MAC locomotives operating on the Alaska Railroad, the F40Cs were the last six-axle passenger locomotives in daily service in mainland North America until the delivery of Metra's first SD70MACH in 2022.
The passenger locomotives derivatives of the General Motors EMD GP40 diesel-electric locomotive have been, and continue to be, used by multiple passenger railroads in North America. For passenger service, the locomotives required extra components for providing steam or head-end power (HEP) for heating, lighting and electricity in passenger cars. Most of these passenger locomotives were rebuilt from older freight locomotives, while some were built as brand new models.
This article contains a list of terms, jargon, and slang used to varying degrees by railfans and railroad employees in the United States and Canada. Although not exhaustive, many of the entries in this list appear from time to time in specialist, rail-related publications. Inclusion of a term in this list does not necessarily imply its universal adoption by all railfans and railroad employees, and there may be significant regional variation in usage.
The MK5000C is a 5,000 hp (3.7 MW) North American diesel-electric locomotive developed by MK Rail. At the time of its introduction in 1994, the MK5000C was the most powerful single prime mover diesel-electric locomotive ever made, a title it would hold for only for one year until GE Transportation released its competing 6,000 hp (4.5 MW) AC6000CW model in 1995.
The MPI MPXpress is a line of diesel-electric locomotives built by MotivePower for commuter rail service. There are five MPXpress models: MP36PH-3S, MP36PH-3C, MP40PH-3C, MP32PH-Q, and MP54AC.
The Dash 8 Series is a line of diesel-electric freight locomotives built by GE Transportation. It replaced the Dash 7 Series in the mid-1980s, and was superseded by the Dash 9 Series for freight usage and the Genesis Series for passenger usage in the mid-1990s.
{{cite web}}: CS1 maint: archived copy as title (link)
Media related to GE P30CH locomotives at Wikimedia Commons