GE U30C

Last updated
GE U30C
GE U30C BN 5383.jpg
Burlington Northern U30C operating at the Illinois Railway Museum in 2004
Type and origin
Power type Diesel-electric
Builder GE Transportation Systems
ModelU30C
Build dateNovember 1966 October 1976
Total produced600 (plus 6 U30CG)
Specifications
Configuration:
   AAR C-C
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Length67 feet 3 inches (20.50 m)
Prime mover GE 7FDL-16
Performance figures
Power output3,000  hp (2,200  kW)
Career
Locale North America
Dispositionmost scrapped, some preserved, others rebuilt into the GE Super 7 Program

The GE U30C is a six-axle locomotive built by General Electric from 1966 to 1976. With 600 units sold, the U30C proved to be a viable alternative for customers who were unable to purchase SD40s from Electro-Motive Diesel (EMD) due to production backlog. Throughout its ten-year production span, the U30C was known for reliability issues concerning its electrical system. However, most railroads were assured of the reliability of the GE Model 752 DC traction motor, and began to place orders for U30Cs starting in 1966. When production ended, the last U30Cs carried pre-Dash 7 specifications, which would be carried in its replacement, the GE C30-7.

Contents

The U30C served customers of all kinds, from mining, to general freights, coal trains, and even as a power source unit for the Department of Transportation's subway-car test tracks in Pueblo, Colorado before a connection from the commercial electric power grid could be established ( Cudahy 1979 ).

Not to be outdone in the freight sector, GE produced a passenger version of the locomotive, the GE U30CG. The U30CG only sold six units for the Atchison, Topeka & Santa Fe Railway.

When most U30Cs were being retired due to old age and mechanical or electrical problems, General Electric initiated a rebuild program where older Universal Series locomotives would be upgraded with the latest technology and fuel-saving systems. GE would then strip the locomotive down to its frame and engine, and completely rebuild the locomotive with new components. When completed, the unit would receive a new designation: GE C30-S7R (R for Rebuilt frame of traded-in locomotive). In the later years, the rebuild frame was discontinued, and a brand new frame would be used, re-designating the locomotive as GE C30-S7N (N for New frame). The only external difference was a large vent on the fireman's side ahead of the engine compartment. The final variation came with the discontinued frame of the Universal series and instead, using GE C40-8 kits. This new model also featured a microprocessor, officially designating this locomotive as GE C30-S7NMP.

A variant of the U20C export locomotive was known as the U30C. This version is unrelated to the U30C built for North America.

Original owners

OwnerQuantityNumbersNotes
Atchison, Topeka and Santa Fe Railway 6400-405model U30CG
Atlantic Coast Line Railroad 43021-3024#3021 was the first U30C built.
Burlington Northern Railroad 1805300-5394, 5800-5839, 5900-59445800-5805, 5900-5911 new as 5300-5305 (1st) and 5353-5364. (1st) 5802 preserved in Gillette, Wyoming.
Colorado & Southern (Chicago, Burlington & Quincy)4890-893All sent to Burlington Northern. Same numbers.
Chesapeake and Ohio Railway 133300-3312
Chicago and North Western Railway 7930-936934 was wrecked and rebuilt into a U34CH in 1978.
Chicago, Milwaukee, St. Paul and Pacific Railroad (Milwaukee Road)85651-5658
Chicago, Rock Island and Pacific Railroad (Rock Island)184582-4599XR Series
Delaware and Hudson Railroad 12701-712
Detroit Edison 11007-012, 018-022
Ferrocarril del Pacifico 8401-408
Kaiser Steel (Eagle Mountain Mine Division)51030–1034Ballasting Sand added to the frame to increase weight (considered the heaviest U30Cs ever built).
Louisville and Nashville Railroad 791470–1499, 1534–1582#1499 was presented in an XR Series paint scheme.
Missouri Pacific Railroad 3525-29, 960-983, 3329-3334
Norfolk and Western Railroad 38000-8002
Pennsylvania Railroad 56535-6539
Reading Railroad 56300-6304
Soo Line Railroad 10800-809
Southern Railway 53800-3804High short hood
Southern Pacific Railroad 377900-7936Ballasting Sand added to the frame to increase weight.
Union Pacific Railroad 1502810–2959#2851 was delivered with a fiberglass nose.
United States Department of Transportation 11

Preservation

  Burlington Northern #5383 is preserved and operational at the Illinois Railway Museum [1]

Burlington Northern #5802 is preserved and on display in Gilette, Wyoming. [2]

DOTX #001 is preserved at the Pueblo Railroad Museum in Pueblo, Colorado. [3]

Reading #6300 is preserved at the Reading Railroad Heritage Museum in Hamburg, Pennsylvania. [4]

• VLIX #1497 (ex-L&N 1497) is preserved at the Southern Appalachia Railroad Museum in Oak Ridge, Tennessee, awaiting restoration. [5]

• VLIX #9009 (ex-DEEX #009) is preserved at the Southern Appalachia Railroad Museum in Oak Ridge, Tennessee, awaiting restoration. [6]

Images

See also

Related Research Articles

<span class="mw-page-title-main">EMD FP45</span> US Diesel-electric locomotive

The EMD FP45 is a cowl unit type of C-C diesel locomotive produced in the United States by General Motors Electro-Motive Division (EMD). It was produced beginning in 1967 at the request of the Atchison, Topeka and Santa Fe Railway, which did not want its prestigious Super Chief/El Capitan and other passenger trains pulled by freight style hood unit locomotives, which have external walkways.

<span class="mw-page-title-main">GE U28B</span>

The GE U28B diesel-electric locomotive model replaced the U25B in early 1966, featuring a slightly uprated prime mover. Early units had the same car body styling as the U25B, while later units had design features more in common with later models. After only a year of production, this model was superseded by the U30B.

<span class="mw-page-title-main">GE U30B</span>

The GE U30B was a diesel-electric locomotive produced by GE Transportation between 1966 and 1975. It was a further development of the U28B, with a 3,000 hp (2,200 kW) 16-cylinder prime mover. The U30B competed with the EMD GP40 and the ALCO Century 430, but was not as successful as the GE U30C.

<span class="mw-page-title-main">GE U28C</span>

The U28C locomotive was developed by General Electric from the U25C, with a slight increase in power of 300 hp (224 kW). A passenger-hauling variant, the U28CG, was also produced for the Atchison, Topeka and Santa Fe Railway.

<span class="mw-page-title-main">EMD GP30</span> Model of American 2250 hp diesel locomotive

The EMD GP30 is a 2,250 hp (1,680 kW) four-axle diesel-electric locomotive built by General Motors Electro-Motive Division of La Grange, Illinois between July 1961 and November 1963. A total of 948 units were built for railroads in the United States and Canada, including 40 cabless B units for the Union Pacific Railroad.

<span class="mw-page-title-main">EMD SD40-2</span> American diesel-electric locomotive

The EMD SD40-2 is a 3,000-horsepower (2,200 kW) C-C diesel-electric locomotive built by EMD from 1972 to 1989.

<span class="mw-page-title-main">EMD GP40</span> 4-axle diesel-electric locomotive built by General Motors Electro-Motive Division

The EMD GP40 is a 4-axle diesel-electric locomotive built by General Motors' Electro-Motive Division between November 1965 and December 1971. It has an EMD 645E3 16-cylinder engine generating 3,000 hp (2,240 kW).

<span class="mw-page-title-main">EMD SD9</span> Model of 1750 hp Co′Co′ American diesel locomotive

The EMD SD9 is a model of diesel locomotive built by General Motors Electro-Motive Division between January 1954 and June 1959. An EMD 567C 16-cylinder engine generated 1,750 horsepower (1.30 MW). Externally similar to its predecessor, the SD7, the SD9 was built with the improved and much more maintainable 567C engine.

<span class="mw-page-title-main">EMD SD35</span> American model of diesel locomotive

The EMD SD35 is a model of 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between June 1964 and January 1966. Power was provided by an EMD 567D3A, 16-cylinder engine which generated 2,500 brake horsepower (1,900 kW). A 3,000-US-gallon fuel tank was used on this unit. This locomotive model shared a common frame with the EMD SD28, giving it an overall length of 60 feet 8+12 inches (18.504 m). 360 examples of this locomotive model were built for American railroads.

<span class="mw-page-title-main">EMD SD40</span> North American diesel-electric locomotive

The EMD SD40 is an American 6-axle diesel-electric locomotive built by General Motors Electro-Motive Division between January 1966 and August 1972. 1,268 locomotives were built between 1966 and 1972. In 1972, an improved version with new electronics was developed and marketed as a new locomotive, the SD40-2.

<span class="mw-page-title-main">GE U23C</span>

The 2300 horsepower GE U23C diesel-electric locomotive model was first offered by GE in 1968, and featured a V-type 12 cylinder version of the standard GE FDL diesel motor. Designed as a competitor to EMD's SD38 and SD39 series, it was intended for heavy transfer, drag and hump service where speed was not a priority. Other than six tall hood doors matching six power assemblies per side, there are very few features which distinguish the U23C from the U30C. The U30C has eight tall hood doors per side, a function of the V16 within.

<span class="mw-page-title-main">GE B30-7</span>

The GE B30-7 is a diesel-electric locomotive model produced by GE from 1977 to 1983 as part of their Dash 7 Series, featuring a 16 cylinder engine producing 3,000 horsepower. A total of 399 units were produced, including 120 cabless B30-7A units. The B30-7AB/A(B) is an unofficial model. The B30-7 was GE's successor to the U30B.

<span class="mw-page-title-main">GE C30-7</span>

The C30-7 is a 6-axle diesel-electric locomotive built by GE Transportation Systems between September 1976 and May 1986 as an updated U30C with a 16-cylinder 3,000 horsepower (2,200 kW) FDL-series diesel engine. 1,137 were built for North American railroads.

<span class="mw-page-title-main">GE 44-ton switcher</span> Diesel-electric switcher locomotive (Built 1940-1956)

The GE 44-ton switcher is a four-axle diesel-electric locomotive built by General Electric between 1940 and 1956. It was designed for industrial and light switching duties, often replacing steam locomotives that had previously been assigned these chores.

<span class="mw-page-title-main">GE P30CH</span> American diesel locomotive

The GE P30CH was one of the first brand-new diesel-electric locomotives built for Amtrak by General Electric during Amtrak's early years. The design was based on the GE U30C, but had a cowl carbody like its EMD competitors. Amtrak operated them between 1975 and 1992.

<span class="mw-page-title-main">GE U36C</span>

The GE U36C is a 3600 hp diesel-electric locomotive model built by GE Transportation Systems.

<span class="mw-page-title-main">GE U30CG</span> US passenger diesel locomotive

The GE U30CG was a passenger-hauling diesel-electric locomotive built by GE Transportation Systems. It was a passenger variant of GE's U30C design purchased by the Atchison, Topeka and Santa Fe Railway. ATSF had purchased ten U28CG locomotives in 1966, and while these locomotives were satisfactory operationally, the railroad felt that their utilitarian appearance was unsuitable for its passenger trains. Desiring smooth-sided passenger power, the railroad ordered the first cowl units from both GE and GM-EMD. GE produced the U30CG to meet this requirement. It was mechanically identical to a U30C except that the bodywork was replaced with a full-width long hood with fluted stainless-steel panels, and a full-width rounded nose and slanted cab front were fitted.

<span class="mw-page-title-main">ALCO RS-3m</span> The ALCO RS-3m is a diesel-electric locomotive rebuilt from an ALCO RS-3 road switcher.

The ALCO RS-3m is a diesel-electric locomotive rebuilt from an ALCO RS-3 road switcher. These 98 locomotives were rebuilt to replace their original ALCO prime mover with the more reliable EMD 567B engine and fan assemblies taken from retired E8s. Many of these rebuilds were performed by the ex NYC DeWitt shop with 56 completed at the ex PRR Juniata shop. The RS3m rebuild program started in 1972 and continued until 1978 under Conrail.

The GE Universal Series is a series of diesel locomotives intended for the export market introduced by General Electric in early 1956. General Electric had previously partnered with Alco, producing locomotives for export using Alco's 244 engine, and provided electrical parts for Alco's domestic production. However, with the advent of the Universal Series, GE ended its partnership with Alco and entered the export locomotive market on its own.

<span class="mw-page-title-main">GE Dash 7 Series</span>

The Dash 7 Series is a line of diesel-electric freight locomotives built by GE Transportation. It replaced the Universal Series in the mid-1970s, and was superseded by the Dash 8 Series in the mid-1980s.

References

  1. "Burlington Northern 5383". Illinois Railway Museum. Retrieved 2024-03-09.
  2. "BN 5802". www.rrpicturearchives.net. Retrieved 2024-03-09.
  3. "RailPictures.Net Photo: DOTX 001 Department of Transportation GE U30C at Pueblo, Colorado by Craig Walker". www.railpictures.net. Retrieved 2024-03-09.
  4. "RCT&HS Roster–Locomotives". www.readingrailroad.org. Retrieved 2024-03-09.
  5. "VLIX 1497". rrpicturearchives.net. Retrieved 2024-03-09.
  6. "VLIX 9009". www.rrpicturearchives.net. Retrieved 2024-03-09.