SBB RABe 501 | |
---|---|
Manufacturer | Stadler Rail |
Constructed | 2016– |
Capacity |
|
Operators | |
Specifications | |
Car body construction | Aluminium |
Train length | 202 m (662 ft 9 in) |
Car length |
|
Width | 2.9 m (9 ft 6 in) |
Height | 4,255 mm (13 ft 11.5 in) |
Floor height |
|
Wheel diameter | 920–840 mm (36–33 in) (new–worn) |
Wheelbase |
|
Maximum speed |
|
Weight | 380 t (370 long tons; 420 short tons) (unladen) |
Traction system | ABB BORDLINE CC1500 MS 3-level IGBT–VVVF [1] |
Traction motors | 8 × TSA TMF 50-33-4 600 kW (805 hp) [2] asynchronous 3-phase AC |
Power output | 4,800 kW (6,440 hp) |
Tractive effort | 300 kN (67,400 lbf) |
Electric system(s) | |
Current collector(s) | 1,450 mm (4 ft 9 in) and 1,950 mm (6 ft 5 in) wide pantographs |
UIC classification | 2′(Bo)′(Bo)′(2)′(2)′(2)′(2)′(Bo)′(Bo)′(2)′(2)′2′ |
Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
Notes/references | |
[3] [4] |
The RABe 501, nicknamed Giruno, is a high-speed electric multiple unit train built by Stadler Rail of Switzerland for the Swiss Federal Railways (SBB). According to Stadler Rail, it was the world's first single-decker low-floor high-speed train. [5]
The trains are intended to replace the ETR610 trains on the trans-Alpine route between Milan (Italy) and Basel / Zürich, [6] with eventually further connections with Germany and Austria. The main route goes through the 57 kilometre-long Gotthard Base Tunnel. As a consequence, the Giruno is also referred to as the "Gotthard train". [7]
The 11-car units operate with a top speed of 250 km/h (155 mph) and can accommodate up to 403 passengers (117 in first class, 286 in second class). Two train sets can be coupled together to accommodate over 800 passengers.
Stadler originally named the train the EC250. This was changed in 2017 to SMILE, [8] short for Schneller Mehrsystemfähiger Innovativer Leichter Expresszug (English: “speedy multi-system innovative lightweight express train”). [8] [9] The SBB have named the train Giruno (from Girun, Romansh for "buzzard", "bearded vulture" or "kestrel"). [10]
Each of the 31 trainsets is numbered and named. Twenty-six are named after the cantons of Switzerland, but the numbering deviates from that of the "Gotthard locomotives". Two are named after the Italian provinces of Liguria and Lombardy, one is named after the commune of Monteceneri (because of the Ceneri Base Tunnel), one after the Saint-Gotthard Massif and one after the Simplon Pass. The names are indicated at both ends of the train and inside the dining car.
List of named RABe 501 trainsets | ||
---|---|---|
№ | Name | Notes |
RABe 501 001 | Ticino | |
RABe 501 002 | Aargau | |
RABe 501 003 | San Gottardo | with coat of arms [11] |
RABe 501 004 | Schwyz | |
RABe 501 005 | Nidwalden | |
RABe 501 006 | Obwalden | |
RABe 501 007 | Uri | |
RABe 501 008 | Monteceneri | |
RABe 501 009 | Zürich | |
RABe 501 010 | Baselland | |
RABe 501 011 | Thurgau | |
RABe 501 012 | Solothurn | |
RABe 501 013 | Zug | |
RABe 501 014 | Bern | |
RABe 501 015 | St. Gallen | |
RABe 501 016 | Glarus | |
RABe 501 017 | Fribourg | |
RABe 501 018 | Appenzell Ausserrhoden | |
RABe 501 019 | Appenzell Innerrhoden | |
RABe 501 020 | Luzern | |
RABe 501 021 | Graubünden | |
RABe 501 022 | Vaud | |
RABe 501 023 | Valais | |
RABe 501 024 | Neuchâtel | |
RABe 501 025 | Genève | |
RABe 501 026 | Basel-Stadt | |
RABe 501 027 | Schaffhausen | |
RABe 501 028 | Jura | |
RABe 501 029 | Simplon | without coat of arms |
RABe 501 030 | Lombardia | without coat of arms |
RABe 501 031 | Liguria | without coat of arms |
In April 2012, Swiss Federal Railways (SBB) issued a tender for 29 new single-deck trains, capable of reaching 250 km/h (155 mph), for service on routes between Germany, Switzerland and Italy via the then under-construction Gotthard Base Tunnel, [12] the only completely flat route through the great Alpine barrier. Bids were placed by Stadler Rail (Switzerland), Siemens (Germany), Alstom (France) and Talgo (Spain). All four bids were rejected by SBB and a second round took place, at which point Siemens withdrew. On 9 May 2014 SBB announced an order worth CHF 980,000,000 for 29 Stadler EC250s. The final signing was delayed, however, as Alstom and Talgo both launched legal challenges: Alstom withdrew theirs in September 2014, while Talgo's complaint –that SBB gave the domestic producer an advantage –was dismissed by the Federal Administrative Court in October 2014. The final contract was signed between SBB and Stadler on 30 October 2014. [13]
The EC250's first public appearance –as a short 5-car set –was at InnoTrans 2016 in Berlin, Germany, by Stadler CEO, Peter Spuhler, and SBB CEO, Andreas Meyer. [14] The first full 11-car set was presented at a ceremony in Bussnang on 18 May 2017, which was also attended by the then Swiss President Doris Leuthard. [15] Shortly afterwards in August, the EC250 was renamed as SMILE following a public competition. [8]
As SBB intend to operate these trains across several countries, testing had to be carried out in Germany, Italy and Austria, in addition to Switzerland. In early April 2018, a test train unit ran through the Gotthard Tunnel at 275 km/h (171 mph) in order to meet approval conditions to operate up to 250 km/h (155 mph) on the line. [16] The Federal Office of Transport approved this service for Switzerland on 4 April 2019 and the European Union Railway Agency approved it for Italy in March 2020 –in both cases, for speeds up to 200 km/h (125 mph). [17] [18]
The first passenger revenue service operated between Zürich and Erstfeld on 8 May 2019, using Giruno unit 501 006. [19]
In February 2024, Stadler and Saudi Arabia Railways (SAR) signed a contract for the supply and maintenance of 10 DMU trains, with an option for 10 more, depicted on artist impressions using the same cab as the Giruno. [20]
The EC250 is designed to comply with the TSI-High-speed regulations and meets the EN 15227 crashworthiness standards.
The cars are connected to Jacobs bogies and the propulsion system consists of four motorised bogies, powered from four roof-mounted electric current collectors. [21] The electrification system is compatible with the Swiss and German 15 kV 16.7 Hz alternating current (AC) overhead power supplies, as well as with Italian 3 kV direct current (DC) and 25 kV 50 Hz electrification systems. The motorized bogies are reportedly capable of generating a maximum power output of 6000 kW. [22]
Each 11-car train set is 200 metres (656 ft 2 in) long and has an empty weight of 380 tonnes (840,000 lb). Each carriage has a width of 2.9 m (9 ft 6 in) and a height of 4.25 m (13 ft 11 in). The wheelbase of the unpowered bogies is 2.7 m (8 ft 10 in), while those of the motorised bogies are 2.75 m (9 ft 0 in). The carriages do not have a uniform floor height as the seats at either end of each car are positioned above the bogies while the central aisle rises towards the carriage connection through ramps.
The low-floor entrances allow step-free access from platforms at heights between 550 mm (22 in) and 760 mm (30 in) and several accessible toilets and areas for wheelchairs are available, allowing the train to comply with the Law on Equal Rights for Persons with Disabilities. [23] As a long-distance train, it also features signal boosters for 3G/4G cellular phone networks, power sockets (for Swiss and international plugs) and large luggage racks for passenger comfort, along with energy-efficient lighting. The interior is flexible, meaning it can be extensively refitted and modified to an operator's requirements. [22]
As of December 2020, Giruno units operate services from Basel and Zürich to Chiasso and Lugano. Services between Zurich and Milan have also operated since 12 August 2020, and have later expanded to Venice, Genoa and Bologna. [24]
The Giruno replaced existing RABDe 500 (ICN) and tilting ETR 610 units on the Gotthard railway, which were reassigned to more winding Alpine routes such as the Jura Foot Railway. [25]
A tilting train is a train that has a mechanism enabling increased speed on regular rail tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest, and standing passengers to lose their balance. In such excessive speeds, it could even cause the train to derail. Tilting trains are designed to counteract this by tilting the carriages towards the inside of the curve, thus compensating for the g-force. The train may be constructed such that inertial forces cause the tilting, or it may have a computer-controlled powered mechanism.
Intercity Express is a high-speed rail system in Germany. It also serves destinations in Austria, France, Belgium, Switzerland and the Netherlands as part of cross-border services. It is the flagship of the German state railway, Deutsche Bahn. ICE fares are fixed for station-to-station connections, on the grounds that the trains have a higher level of comfort. Travelling at speeds up to 300 km/h (190 mph) within Germany and 320 km/h (200 mph) when in France, they are aimed at business travellers and long-distance commuters and marketed by Deutsche Bahn as an alternative to flights.
Swiss Federal Railways is the national railway company of Switzerland.
Rail transport in Switzerland is noteworthy for the density of its network, its coordination between services, its integration with other modes of transport, timeliness and a thriving domestic and trans-Alp freight system. It is made necessary by strong regulations on truck transport, and is enabled by properly coordinated intermodal logistics.
Pendolino is an Italian family of high-speed tilting trains used in Italy, Spain, Germany, Poland, Portugal, Slovenia, Finland, the Czech Republic, Slovakia, the UK, the US, Switzerland, China, and Greece. It was also used in Russia from December 12, 2010 until March 26, 2022. Based on the design of the Italian ETR 401, it was further developed and manufactured by Fiat Ferroviaria, which was taken over by Alstom in 2000.
Talgo is a Spanish manufacturer of intercity, standard, and high-speed passenger trains. Talgo is an abbreviation of Tren Articulado Ligero Goicoechea Oriol.
The Gotthard Base Tunnel is a railway tunnel through the Alps in Switzerland. It opened in June 2016 and full service began the following December. With a route length of 57.09 km (35.5 mi), it is the world's longest railway and deepest traffic tunnel and the first flat, low-level route through the Alps. It lies at the heart of the Gotthard axis and constitutes the third tunnel connecting the cantons of Uri and Ticino, after the Gotthard Tunnel and the Gotthard Road Tunnel.
The SBB RABDe 500, also known as the ICN, is a Swiss high speed passenger train which was introduced in 2000, in time for Expo.02 held in western Switzerland in 2002. Its maximum speed is 200 km/h (125 mph), and it employs tilting technology, which allows it to travel through curvy routes faster than non-tilting trains. The train sets were a joint development by Bombardier, Swiss Federal Railways and Alstom, with an aerodynamic body designed by Pininfarina, bogies and tilting mechanism designed by the then SIG, Schweizerische Industrie Gesellschaft.
The CargoSprinter is a freight multiple unit designed to transport freight or equipment. The CargoSprinter was designed by Windhoff GmbH (Germany) in the mid-1990s.
The New Pendolino is a class of high-speed tilting trains built by Alstom Ferroviaria for Trenitalia and Cisalpino.
Jacobs bogies are a type of rail vehicle bogie commonly found on articulated railcars and tramway vehicles.
The Double-deck Coach is a bilevel passenger railcar currently manufactured by Alstom, which acquired Bombardier Transportation in 2021 used by various European railways and Israel Railways. The current generation of double-deck coaches can be run at speeds up to 200 km/h (125 mph). Depending on their configuration, each coach can seat 100 to 150 passengers.
The Ceneri Base Tunnel is a Swiss railway base tunnel in the canton of Ticino. It passes under Monte Ceneri between Camorino in the Magadino Flat and Vezia near Lugano; it bypasses the former high-altitude rail route through the Monte Ceneri Tunnel. It is composed of two single-track tunnels, each 15.4 km (9.6 mi) long. It is part of the New Railway Link through the Alps (NRLA) project for faster north-south rail links across the Swiss Alps.
Stadler FLIRT is a passenger multiple unit trainset made by Stadler Rail of Switzerland. The baseline design of FLIRT is an electric multiple unit articulated trainset that can come in units of two to twelve cars with two to six motorized axles. The maximum speed is 200 km/h (125 mph). Standard floor height is 57 cm, but 78 cm high floors are also available for platform heights of 76 cm.
The Südostbahn – commonly abbreviated to SOB – is a Swiss railway company, and a 1,435 mmstandard gauge network in Central and Eastern Switzerland. It resulted from the merger of the original SOB with the Bodensee–Toggenburg railway (BT) at the end of 2001.
Rail 2000 is a large-scale project of the Swiss Federal Railways (SBB CFF FFS) established in 1987 to improve the quality of the Swiss rail network for the New millennium. It includes measures to accelerate a number of existing connections and the modernisation of rolling stock. The federal government decision to support the project in 1986 was approved by a referendum in 1987. In 2004 the first phase was completed consisting of around 130 projects with a budget of around CHF 5.9 billion.
Bellinzona railway station serves the town of Bellinzona, in the canton of Ticino, Switzerland. It is on the Swiss Federal Railways' Gotthard line. The station is nicknamed Porta del Ticino since the opening of the Gotthard Base Tunnel in 2016.
High-speed rail in Switzerland consists of two new lines and three new base tunnels, including the world's longest railway and deepest traffic tunnel: the Gotthard Base Tunnel whose length is 57 km (35 mi). Each of these tunnels have a technical maximum speed of 250 km/h (155 mph), which is reduced, at least in the Gotthard Base Tunnel and the Ceneri Base Tunnel, to a maximum authorized speed of 230 km/h (145 mph), for environmental and economic reasons.
The Swiss locomotive class Ae 4/6 was a class of electric locomotives. They were intended as a powerful locomotive for the steep gradients of the Gotthard Railway, but smaller than the huge 'double locomotives' which had previously been tested there. They were built from 1941, during World War II, and although Switzerland remained neutral through this, material shortages led to some quality problems with these locomotives.
The SOB Traverso, designated RABe 526, is a passenger articulated trainset manufactured by Stadler Rail for Südostbahn, a railway company in Switzerland. It is a derivative of the Stadler FLIRT and began entering service in 2019. Südostbahn employs the Traversos on long-distance routes such as the Voralpen-Express and the Treno Gottardo services over the traditional Gotthard railway.