Fairbanks Morse 38 8-1/8 diesel engine

Last updated

The Fairbanks-Morse 38 8-1/8 is a diesel engine of the two-stroke, opposed-piston type. [1] It was developed in the 1930s, and is similar in arrangement to a contemporary series of German Bombers aircraft diesels. [2] The engine was used extensively in US diesel electric submarines of the 1940s and 1950s, as backup power on most US nuclear submarines, as well as in other marine applications, stationary power generation, and briefly, locomotives. A slightly modified version, the 38ND 8-1/8, continues in service on Los Angeles-, Seawolf-, and Ohio-class nuclear submarines of the US Navy. The 38 8-1/8 has been in continuous production since its development in 1938, and is currently manufactured by a descendant of Fairbanks-Morse, FMDefense, in Beloit, Wisconsin.

Contents

Specifications

Fairbanks Morse Opposed Piston liner and water jacket. Fairbanks Morse OP Liner.jpg
Fairbanks Morse Opposed Piston liner and water jacket.

The 38 8-1/8 engines are inline diesel engines, with combustion occurring between two opposed pistons within a single cylinder liner. The engine has a bore of 8-1/8 inches (206.4 mm), a stroke of 10 inches (254.0 mm) for each piston, and the cylinder height is 38 inches (970 mm). The engine block is of dry block construction. [1] They have been manufactured with between four and twelve cylinders, depending on application.

Vertical force is transmitted from the opposed trunk style pistons to either an upper or lower crankshaft. The two crank shafts are geared together by a vertical drive shaft. Pistons are removed by either removing the top crankshaft, and removing from the top, or by removing through the lower crank case access doors. [1]

The lower crankshaft is timed 12 degrees before the upper crankshaft in order to expel exhaust gasses prior to the admittance of scavenging air. Fresh air cleanses the cylinders of remaining exhaust prior to the exhaust ports being covered by the rising lower piston. [3]

As this engine is of two stroke opposed-piston design, unlike most four stroke engines it has no cylinder head nor mechanical valves. Instead, ports in the cylinder liners provide incoming air and exhaust. The two camshafts on the engine provide timing for two injection pumps per cylinder. Porting allows exhaust gases to be expelled and scavenge air to be taken in by a positive air box pressure. Intake air is provided by an engine driven Roots blower or turbo-supercharger. [4]

Applications

North America

World War II USS Pampanito (SS-383) 38 8-1/8 diesel engines. Opposed piston engine 1.jpg
World War II USS Pampanito (SS-383) 38 8-1/8 diesel engines.
From the Muskegon, Michigan, Silversides Submarine Museum. USS Silversides (SS-236). Fairbanks Morse & Co. 38 8-1/8 diesel engine. Fairbanks Morse & Co. 38 8-1-8 diesel engine on the USS Silversides 2.jpg
From the Muskegon, Michigan, Silversides Submarine Museum. USS Silversides (SS-236). Fairbanks Morse & Co. 38 8-1/8 diesel engine.

Historically, the opposed-piston engine was used in U.S. diesel-electric submarines of World War II and the 1950s. [5] Surviving diesel-electric submarines with these engines include USS Pampanito, USS Blueback, USS Ling, and USS Torsk. This engine was also used in surface ships, notably in the diesel-electric Wind-class icebreakers and in the geared Edsall-class destroyer escorts. [6] [7] [8] [9] [10] When the innovative but faulty "pancake" engines of the 1950s Tang class proved unworkable, they were replaced with World War II-style Fairbanks-Morse engines, and these remained standard on US diesel-powered submarines through the early 1960s. Variants of the 38 8-1/8 and other Fairbanks-Morse engines provided (and continue to provide) backup power on US nuclear submarines commissioned through the 1990s. [11] In addition, certain ice-breaking class vessels of the Canadian Coast Guard used Fairbanks Morse opposed piston engines in the operation of a diesel electric/gas-turbine electric operation. The former CCGS Norman McLeod Rogers, which ended its service under the Chilean flag as Contraalmirante Oscar Viel Toro is one such example. [12]

Current[ when? ] marine Opposed-Piston applications include use as main propulsion engines and service generators. The USCG Hamilton-class cutters use the 38 8-1/8 engine in a CODOG arrangement, where the diesel engine provides cruise propulsion, and a gas-turbine provides propulsion where high speeds are required.

The Fairbanks Morse Opposed Piston engine is also used as a stationary power generator engine, both in primary and standby duties. [13]

Railroad Service

During the 1940s and 1950s, Fairbanks-Morse attempted to market their opposed-piston powered line of diesel-electric locomotives, with their entire post-war lineup using the 38 8-1/8 in some form. They had good success with their early switching locomotives, [14] but the 38D 8-1/8 experienced problems in mainline service that were not encountered in naval service. As originally configured for the Erie-Built locomotives of 1945, the engine ran at a Brake Mean Effective Pressure of 95.2 psi, as opposed to the 85 psi rating for Navy engines and higher than the engines in competing locomotives. [15] Submarines gave the engines access to cool, sea-level air, but on Western railroads like Union Pacific, the engines were operating under heavy loads at high altitude, high temperature, and low humidity, and often in the wake of waste heat from leading locomotives. [15] Locomotives had closed-loop cooling systems while submarines drew cooling water from the sea. Because the exhaust port was located near the lower pistons, the engines suffered excessive lower-piston temperatures which led to piston failure, which could then cause cylinder liner damage and a possible crankcase explosion. [15] F-M immediately attempted to address the problem but it was seven to eight years before a piston was developed that could stand up to railroad service. [15] Replacement of a single power assembly (cylinder liner and its two pistons) required moving the locomotive under a crane and removing (and later reinstalling) the locomotive's roof hatch, upper crankcase, upper caps, upper connecting rod caps, and upper crankshaft, making the operation much more time- and resource-intensive than a power assembly change on other engine types. [15] Fairbanks-Morse learned that in shops that maintained multiple locomotive types, where the foreman was under pressure to repair as many locomotives as possible, repair of OP engines that required extensive disassembly was often delayed in favor of other types of locomotives that could be turned around more quickly. [15]

Fairbanks-Morse exited the locomotive market in 1963. [16] The locomotive market share was eventually dominated by products from GM's Electro-Motive Division, the American Locomotive Company, and General Electric.

Soviet Union

The 38 8-1/8 was reverse-engineered in the USSR and used as a primary engine for railroad locomotives. The first Soviet mass-produced diesel locomotive, TE3, was powered by a 1470 kW (2000 hp) 2D100 engine, direct descendant of the marine 38 8-1/8 engine. The TE3 was produced in high numbers (up to 7600 units), and proved to be a reliable mainline freight locomotive. Later this engine evolved to the turbocharged 10D100, rated at 2200 kW (3000 hp). It was used as powerplant for later 2TE10L, 2TE10M, 2TE10U series locomotives. Unfortunately, the 10D100 engine became infamous for its high rate of failures and low operating availability. Currently, many TE10 locomotives remain in service in Russia, Ukraine, Belarus, Latvia, and Kazakhstan. However, they are often re-engined with more modern and fuel-efficient 4-stroke engines during rebuilding programs.

13D100 variant was used as a generating set in diesel-electric Dobrynya Nikitich-class icebreakers and their derivatives.

Developments

The 38 8-1/8 underwent development to provide for better fuel efficiency and lessen emissions. In the 1990s, Fairbanks-Morse applied their "Enviro Design" technology to run the opposed piston engine as a dual diesel and natural gas engine. This system injects a small 'pilot' amount of diesel fuel to aid in the combustion of natural gas within the combustion chamber while controlled with computerized electronics. [17]

See also

Related Research Articles

<span class="mw-page-title-main">Two-stroke engine</span> Internal combustion engine type

A two-strokeengine is a type of internal combustion engine that completes a power cycle with two strokes of the piston in one revolution of the crankshaft. In a two-stroke engine, the end of the combustion stroke and the beginning of the compression stroke happen simultaneously, with the intake and exhaust functions occurring at the same time.

<span class="mw-page-title-main">Napier Deltic</span> Opposed-piston engine used in marine, firefighting and BR locomotive applications

The Napier Deltic engine is a British opposed-piston valveless, supercharged uniflow scavenged, two-stroke diesel engine used in marine and locomotive applications, designed and produced by D. Napier & Son. Unusually, the cylinders were disposed in a three-bank triangle, with a crankshaft at each corner of the triangle.

A V20 engine is a twenty-cylinder piston engine where two banks of ten cylinders are arranged in a V configuration around a common crankshaft. Large diesel V20 engines have been used in diesel locomotives, haul trucks, electric generators and marine applications.

<span class="mw-page-title-main">Opposed-piston engine</span> Combustion engine using disks compressing fuel in the same cylinder

An opposed-piston engine is a piston engine in which each cylinder has a piston at both ends, and no cylinder head. Petrol and diesel opposed-piston engines have been used mostly in large-scale applications such as ships, military tanks, and factories. Current manufacturers of opposed-piston engines include Cummins, Achates Power and Fairbanks-Morse Defense (FMDefense).

<i>Tang</i>-class submarine Class of diesel-electric submarine by US Navy

The Tang-class submarines were the first submarines designed and built by the United States Navy after World War II. They incorporated the best features of the high-speed German Type XXI U-boat and the venerable U.S. Navy fleet submarine. The Tang class, with the fleet submarines converted under the Greater Underwater Propulsion Power (GUPPY) program, had much higher submerged performance than their predecessors, but were quickly surpassed by the nuclear-propelled submarines that entered service beginning in 1954. Six units in total were built.

<span class="mw-page-title-main">Junkers Jumo 205</span> Aircraft diesel engine family

The Jumo 205 aircraft engine was the most numerous of a series of aircraft diesel engines produced by Junkers. The Jumo 204 first entered service in 1932. Later engines of this type comprised the experimental Jumo 206 and Jumo 208, with the Jumo 207 produced in some quantity for the Junkers Ju 86P and -R high-altitude reconnaissance aircraft, and the 46-meter wingspan, six-engined Blohm & Voss BV 222 Wiking flying boat. All three of these variants differed in stroke and bore and supercharging arrangements. In all, more than 900 of these engines were produced, in the 1930s and through most of World War II.

<span class="mw-page-title-main">V18 engine</span> Piston engine with 18 cylinders in vee configuration

A V18 engine is an eighteen-cylinder piston engine where two banks of nine cylinders are arranged in a V configuration around a common crankshaft.

Fairbanks, Morse and Company was an American manufacturing company in the late 19th and early 20th century. Founded in 1823 as a manufacturer of weighing scales, it later diversified into pumps, engines, windmills, coffee grinders, radios, farm tractors, feed mills, locomotives, and industrial supplies. It was purchased by the Penn-Texas conglomerate in 1958.

<span class="mw-page-title-main">EMD 645</span> Reciprocating internal combustion engine

The EMD 645 is a family of two-stroke diesel engines that was designed and manufactured by the Electro-Motive Division of General Motors. While the 645 series was intended primarily for locomotive, marine and stationary engine use, one 16-cylinder version powered the 33-19 "Titan" prototype haul truck designed by GM's Terex division

<span class="mw-page-title-main">Electro-Motive Diesel</span> American locomotive manufacturer

Electro-Motive Diesel is a brand of diesel-electric locomotives, locomotive products and diesel engines for the rail industry. Formerly a division of General Motors, EMD has been owned by Progress Rail since 2010. Electro-Motive Diesel traces its roots to the Electro-Motive Engineering Corporation, founded in 1922 and purchased by General Motors in 1930. After purchase by GM, the company was known as GM's Electro-Motive Division. In 2005, GM sold EMD to Greenbriar Equity Group and Berkshire Partners, and in 2010, EMD was sold to Progress Rail, a subsidiary of the American heavy equipment manufacturer Caterpillar. Upon the 2005 sale, the company was renamed to Electro-Motive Diesel.

In the context of an internal combustion engine, the term stroke has the following related meanings:

The Erie-built was the first streamlined, cab-equipped dual service diesel locomotive built by Fairbanks-Morse, introduced as direct competition to such models as the ALCO PA and FA and EMD FT. F-M lacked the space and staff to design and manufacture large road locomotives in their own plant at Beloit, Wisconsin, and was concerned that waiting to develop the necessary infrastructure would cause them to miss out on the market opportunity for large road locomotives. Engineering and assembly work was subcontracted out to General Electric, which produced the locomotives at its Erie, Pennsylvania, facility, thereby giving rise to the name "Erie-built."

<span class="mw-page-title-main">SEMT Pielstick</span> Rolling stock manufacturer

SEMT Pielstick was a French company that designed and built large diesel engines. Its full name was Société d’Etudes des Machines Thermiques.

A steam diesel hybrid locomotive is a railway locomotive with a piston engine which could run on either steam from a boiler or diesel fuel. Examples were built in the United Kingdom, Soviet Union and Italy but the relatively high cost of fuel oil, or failure to resolve problems caused by technical complexity, meant that the designs were not pursued.

The firm of Hooven, Owens, Rentschler, and Company manufactured steam and diesel engines in Hamilton, Ohio. Because the firm was frequently known by its initials, H.O.R., the Hooven is sometimes incorrectly rendered as Hoover, and the Owens may be mistaken for Owen.

<span class="mw-page-title-main">Free-piston engine</span> Type of engine with no crank

A free-piston engine is a linear, 'crankless' internal combustion engine, in which the piston motion is not controlled by a crankshaft but determined by the interaction of forces from the combustion chamber gases, a rebound device and a load device.

<span class="mw-page-title-main">Two-stroke diesel engine</span> Engine type

A two-stroke diesel engine is a diesel engine that uses compression ignition in a two-stroke combustion cycle. It was invented by Hugo Güldner in 1899.

<span class="mw-page-title-main">Single- and double-acting cylinders</span> Classification of reciprocating engine cylinders

In mechanical engineering, the cylinders of reciprocating engines are often classified by whether they are single- or double-acting, depending on how the working fluid acts on the piston.

<span class="mw-page-title-main">Internal combustion engine</span> Engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber

An internal combustion engine is a heat engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is typically applied to pistons, turbine blades, a rotor, or a nozzle. This force moves the component over a distance. This process transforms chemical energy into kinetic energy which is used to propel, move or power whatever the engine is attached to.

<span class="mw-page-title-main">Cleveland Diesel Engine Division</span>

The Cleveland Diesel Engine Division of General Motors (GM) was a leading research, design and production facility of diesel engines from the 1930s to the 1960s that was based in Cleveland, Ohio. The Cleveland Diesel Engine Division designed several 2 stroke diesel engines for submarines, tugboats, destroyer escorts, Patapsco-class gasoline tankers and other marine applications. Emergency generator sets were also built around the Cleveland Diesel and were installed in many US warships. The division was created in 1938 from the GM-owned Winton Engine Corporation and was folded into the GM Electro-Motive Division in 1962. The engines continue in use today on older tugs.

References

  1. 1 2 3 Technical Manual: 1500 KW Diesel Generator Set. Department of the Navy, Naval Ship Systems Command. 1967.
  2. ↑ Friedman, Norman (1995). U.S. Submarines Through 1945: An Illustrated Design History. Annapolis, Maryland: United States Naval Institute. p. 263. ISBN   1-55750-263-3.
  3. ↑ Submarine Main Propulsion Diesels. Department of the Navy, NAVPERS. 1946.
  4. ↑ "Fairbanks-Morse Company Model 38D-8-1/8 Opposed Piston Engine". Tugboat Enthusiasts Society of the Americas. Archived from the original on February 21, 2013. Retrieved April 1, 2012.
  5. ↑ Pinkpank, Jerry A (1973). The Second Diesel Spotter's Guide. Kalmbach Books. p. 323. LCCN   66-22894.
  6. ↑ Silverstone, Paul H (1966). U.S. Warships of World War II. Doubleday and Company. pp. 167–170, 176, 378.
  7. ↑ Jane's Fighting Ships of World War II . Crescent Books (Random House). 1998. pp.  287, 288, 290, 308. ISBN   0517-67963-9.
  8. ↑ "NavSource USS Finback SS-230". Photographic History of the U.S. Navy. NavSource Naval History. Retrieved 2013-03-03.
  9. ↑ "NavSource USS Edsall DE-129". Photographic History of the U.S. Navy. NavSource Naval History. Retrieved 2013-03-03.
  10. ↑ "NavSource USS Westwind AGB 6". Photographic History of the U.S. Navy. NavSource Naval History. Retrieved 2013-03-03.
  11. ↑ Gardiner, Robert (1995). Conway's All the World's Fighting Ships 1947-1995. Annapolis, Maryland: Naval Institute Press. p. 603. ISBN   1-55750-132-7.
  12. ↑ "Norman McLeod Rogers". Shipping World and Shipbuilder. 3841. 163. January 1970.
  13. ↑ Steigers, J.A. (2002). "Demonstrating the Use of Fish Oil as Fuel in a Large Stationary Engine".{{cite journal}}: Cite journal requires |journal= (help)
  14. ↑ Aldag Jr., Robert (March 1987). "F-M Against the Odds Part 1: How Fairbanks Morse Got Into the Locomotive Business". Trains. Kalmbach Publishing Co.
  15. 1 2 3 4 5 6 Aldag Jr., Robert (April 1987). "F-M Against the Odds Part 2: Train Master Triumph, Speed Merchant Flop, OP Paradox". Trains. Kalmbach Publishing Co.
  16. ↑ Pinkepank(73) pages 323-324
  17. ↑ "Enviro-Design | Fairbanks Morse Engine". Fairbanks Morse Engine. Retrieved April 16, 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.