| Fauvel AV.2 | |
|---|---|
 | |
| Role | Flying wing |
| National origin | France |
| Manufacturer | Guerchais and Caudron |
| Designer | Charles Fauvel |
| First flight | 1932 |
| Number built | 1 |
The Fauvel AV.2 (AV for aile volante (English: flying wing) was the first Fauvel type to fly, completed in 1932.
According to his own account, the idea of a flying wing aircraft came to Fauvel in July 1928 during a discussion of the design of high performance gliders; the central aim was to cut down drag to near the limit set by the lift induced drag of the wing by minimising other components. The best possible aircraft should avoid everything but the wing. In 1929 experiments were made with a model of his initial design, known as the AV.1, in the wind tunnel at the aeronautical laboratory at Saint-Cyr to check lift, drag and stability. He built his first full-size aircraft in collaboration with Louis Peyret. It could be flown as a glider or powered with a 15 kW (20 hp) engine. Peyret had no spare man-power in his factory and a deal was struck with the Société Makhonine. Initially it was intended that the AV.2 should be built by Guerchais at Saint Cloud but after their closure construction was taken over by Caudron and a more powerful engine fitted. [1]
The AV.2 was almost entirely wing. Constructed around a single main spar, with an auxiliary spar to carry the ailerons, it was a wooden structure with plywood skin from the main spar forward around the leading edge forming a D-box. The rest was fabric covered. [2] There was a thick centre section, which occupied about 20% of the span but more than 33% of its area, and outer panels with marked taper and dihedral. [1] [2]
In the absence of a rudder, the AV.2's pilot controlled yaw by differentially operating two pairs of airbrakes, each mounted near a wing tip and opening above and below the wing. The outer panels also carried ailerons. The only vertical surfaces on the wing were two fixed triangular fins, intended to reduce turbulence at each end of the unusual elevator designed by Peyret, mounted on the trailing edge of the centre section. [2] It consisted of two geometrically similar surfaces, each of symmetrical section and joined to each other and to the wing without a gap. In plan the rear surface, though shorter, blended smoothly into the forward one. Together they formed a control surface with adjustable curvature, which could modify the profile of the centre section from symmetric to reflex. The pilot's controls were conventional; the airbrakes were controlled with a rudder bar which when rotated raised them differentially and when pressed forward opened them together as brakes. The ailerons and elevator operated by the usual control column. His seat was in an open cockpit at the leading edge of the wing, where a brief, rounded, enclosed forward extension carried a windscreen and pitot tube. [1] [2]
The AV.2 was powered by a 24 kW (32 hp) ABC Scorpion flat twin engine arranged in pusher configuration and driving a two blade propeller. It was contained in a tear-shaped pod that also held the fuel and oil tanks, mounted over the cockpit on a mast of steel tubes. It had a low, wide track tailskid undercarriage with its mainwheels semi-recessed into the centre section where it began to thin towards the outer panels. There were wheel brakes, operated like the airbrakes by forward pressure on the rudder bar, which came into operation when the airbrakes were more than half extended. [1] [2]
The AV.2 was completed in 1932. [2]
Data from Hauet (2001), p.290 [2] Performance figures estimated.
General characteristics
Performance
The SZD-6x Nietoperz was a single-seat tail-less experimental glider aircraft that was designed and built in Poland at Szybowcowy Zakład Doświadczalny in Bielsko-Biała in 1951. Only one example was constructed.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Alpaero Choucas is a French two seat, single engine tailless kit-built ultralight motor glider. At least 12 are flying, with more under construction.
The Ciani EC 38/56 Urendo, or SSVV EC 38/56 Urendo is an Italian tandem-seat training glider from the 1950s. Four were built, one winning the Italian National Championships in 1959. Another, restored, still flies.
The IIL IS-9 was a low powered, experimental pod and boom style motor glider, designed and built in Romania in the late 1950s.
The Caudron C.68 was a two-seat French training and touring aircraft, built in the early 1920s, which attracted interest at the time because of its simple and fast wing folding arrangement. Only a few were produced.
The Caudron C.43 was the first French five-engined aircraft, a biplane intended for passenger transport or military use and multi-engined for safety. A development of the three-engined Caudron C.39, it had one tractor configuration engine in the nose and two push-pull pairs between the wings. It was capable of carrying eight passengers but was not developed.
The Caudron C.25 was a large, three-engined, biplane airliner, designed and built in France soon after the end of World War I. Its enclosed cabin could accommodate up to eighteen passengers.
The Caudron Type O was a French single seat air racing biplane first flown in 1914.
The Hydroaéroplane Caudron-Fabre, (Caudron-Fabre), was a French amphibious seaplane which competed in the 1912 Monaco event. It was one of the first true amphibians, able to take-off from water and touch down on land.
The Caudron Type L was a two-seat French pusher configuration amphibious biplane, flown around 1913 and intended for naval use.
The Caudron Type B was a 1911 development of the earliest Caudron type, the Caudron Type A, with a nacelle style fuselage and more powerful engine. Initially an equal span biplane, it was modified into a sesquiplane.
The Albessard Triavion, sometimes known as the Peyret-Albessard Triavion, was a three surface aircraft, combining a tandem wing and conventional tailplane.
The Caproni Ca.95 was a large, three engine, long range, heavy bomber prototype built in Italy in 1929. It could carry a 1,600 kg (3,500 lb) bomb load and had three defensive gun positions. Only one was built.
The Caudron C.570 was a French twin-engine aircraft designed and built by Caudron in the mid-1930s. It was designed to function in multiple roles; as a bomber, passenger transport, paratroop aircraft, cargo aircraft and air ambulance.
The WNF Wn 16 was an Austrian experimental aircraft built near the start of World War II to test the properties of the then-new tricycle undercarriage arrangement.
The Mauboussin M.112, M-12 or Mauboussin M.XII was originally called the Peyret-Mauboussin PM XII and was renamed when Mauboussin founded his own company in 1931, ending his partnership with Louis Peyret. It was a French, single-engine, two-seat, low cantilever wing touring monoplane. At least six were built.
The Peyret-Nessler Libellule (Dragonfly) was a French two-seat, low-powered parasol wing light aircraft built in 1927 to provide practical but economical flying. It was one of the first of these French avionettes.
The Muniz M-5 was the first of Antonio Guedez Muniz's aircraft designs to fly; soon afterwards he became the first Brazilian to design an aircraft which reached series production. The sole example of the M-5, built while he was a student in France by Caudron, was a low wing cabin tourer or military liaison aircraft.
The Fauvel AV.3 (AV for aile volante was a flying wing glider built in France in the early 1930s.