Ferrari 268/282C/308C engine

Last updated
Ferrari 268/282C/308C engine [1]
Overview
Manufacturer Ferrari
Production1983–1986
Layout
Configuration 90° V8
Displacement 2.6–3.0  L (159–183  cu in)
Cylinder bore 80  mm (3  in)
Piston stroke 64.5  mm (3  in)
Valvetrain 32-valve, DOHC, four-valves per cylinder
Compression ratio 7.0:1–8.0:1
Combustion
Turbocharger KKK twin-turbocharged
Fuel system Mechanical multi-point fuel injection
Fuel type Gasoline
Oil system Dry sump
Output
Power output 620–850  hp (462–634  kW)
Torque output 376–800  lb⋅ft (510–1,085  N⋅m)

The Ferrari 268/282C/308C engine is a twin-turbocharged, 2.6-litre, 2.8-litre, and 3.0-litre, V-8 racing engine, designed, developed and built by Ferrari, for their sister company Lancia, to use in their Lancia LC2 Group C sports prototype race car; between 1983 and 1986. [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] The engine itself is derived from the Dino engine.

Contents

Design

Besides the fact that the LC1 had an open-cockpit, the turbocharged straight-four Lancia engine it had used was not capable of achieving the fuel economy necessary in the new Group C regulations, requiring Lancia to also seek a new powerplant. [13] Under the direction of Cesare Fiorio, Lancia began to work on the LC1's replacement. Lancia lacked a production engine large enough to base a racing engine on, leaving the company to turn to outside sources. Since Lancia were owned by the Fiat Group, they were able to seek the assistance of fellow Fiat company Ferrari. Ferrari allowed Lancia to adapt the new naturally aspirated 3.0 litres (183 cu in) four valve V8 which had been introduced in the Ferrari 308 GTBi QV in 1982. [14] The development of the engine was assigned by Enzo Ferrari to Nicola Materazzi, then Chief Engineer in the Racing Department. The development was done in parallel with that of the F114B powering the 288 GTO and both engines were intended with high duty in mind, with one difference being that the 288 GTO engine would use IHI turbos for the road. [15] [16] [17] [18] [19] [20] The basic engine architecture was heavily redesigned for racing purposes and the engine was reduced in capacity to 2.6 litres (159 cu in) [2] [14] and two KKK turbochargers were added to help the engine provide the fuel economy and power necessary. [21] The specific engine displacement was chosen because of the possibility of using the same engine in the North American CART series. [13] The engine was initially connected to a Hewland five-speed manual gearbox, which was replaced by an Abarth-cased unit in 1984. [22] [23]

The Ferrari V8 was modified in 1984, bringing the displacement back up to 3.0-litres in an attempt to increase reliability and horsepower while improved engine electronics from Magneti Marelli allowed the larger engine to use the same amount of fuel as the previous version. [14] The engine developed just under 840 HP at 9000 rpm with massive 800 lb.-ft. at 4800 rpm, the twin KKK turbos were running at 3.0 bar boost and would start pulling from 3000 rpm. [24] In total, seven LC2s were built under the direction of Lancia, while a further two were built for Gianni Mussato without official backing after the program had ended. [25]

After the program had ended, Abarth acquired an LC2 and fitted it with the 3.5-litre Alfa Romeo Tipo 1035 V10 engine from the Alfa Romeo 164 Procar, and developed it under the project name SE047. The SE047 was an early development of the Alfa Romeo SE 048SP project in 1988. The SE047's engine was ultimately not utilized in the later stages of the SE 048SP development. [26]

Applications

Related Research Articles

<span class="mw-page-title-main">Ferrari 328</span> Motor vehicle

The Ferrari 328 GTB and GTS are mid-engine V8, two-seat sports cars created by Italian automobile manufacturer Ferrari. It was the successor to the Ferrari 308 GTB and GTS. While mechanically still based on the 308, modifications were made to the body, chassis, and engine, most notably an increase in engine displacement to 3.2 L for increased power and torque output. The 328 is still considered by some enthusiasts to be one of the most reliable and functional Ferraris; unlike other models, much of its maintenance can be performed without lowering the engine from the vehicle. In 1989, the 328 was succeeded by the 348.

<span class="mw-page-title-main">Grand tourer</span> High-performance luxury car

A grand tourer (GT) is a type of car that is designed for high speed and long-distance driving with performance and luxury. The most common format is a front-engine, rear-wheel-drive two-door coupé with either a two-seat or a 2+2 arrangement. Grand tourers are often the coupé derivative of luxury saloons or sedans. Some models, such as the Ferrari 250 GT, Jaguar E-Type, and Aston Martin DB5, are considered classic examples of gran turismo cars.

<span class="mw-page-title-main">Lancia Stratos</span> Rally racing sports car 1973–1978

The Lancia Stratos HF, known as Lancia Stratos, is a rear mid-engined sports car designed for rallying, made by Italian car manufacturer Lancia. It was highly successful in competition, winning the World Rally Championship in 1974, 1975 and 1976; as well as winning the 1974 Targa Florio, winning the Tour de France Automobile five times and the Giro d'Italia automobilistico three times.

<span class="mw-page-title-main">Lancia Thema</span> Motor vehicle

The Lancia Thema is an executive car produced by the Italian automaker Lancia between 1984 and 1994, and one of four cars to share the Type Four platform alongside the Alfa Romeo 164, Fiat Croma and Saab 9000. The Thema was first shown at the Turin Motor Show in 1984. The Thema was available as a saloon and as a station wagon designed and produced by Pininfarina.

<span class="mw-page-title-main">Bugatti EB 110</span> Motor vehicle

The Bugatti EB 110 is a mid-engine sports car initially conceived by Ing. Paolo Stanzani in the mid 1980s and produced by Bugatti Automobili S.p.A. from 1991 until 1995, when the company was liquidated. The model restarted the brand's presence in the automobile industry after a hiatus of nearly 40 years.

<span class="mw-page-title-main">Ferrari F40</span> Italian flagship sports car produced from 1987–1992

The Ferrari F40 is a mid-engine, rear-wheel drive sports car engineered by Nicola Materazzi with styling by Pininfarina. It was built from 1987 until 1992, with the LM and GTE race car versions continuing production until 1994 and 1996 respectively. As the successor to the 288 GTO, it was designed to celebrate Ferrari's 40th anniversary and was the last Ferrari automobile personally approved by Enzo Ferrari. At the time it was Ferrari's fastest, most powerful, and most expensive car for sale.

The Ferrari Dino engine is a line of mechanically similar V6 and V8 engines produced by Ferrari for about 40 years from the late 1950s into the early 2000s.

<span class="mw-page-title-main">Alfa Romeo Twin Cam engine</span> Reciprocating internal combustion engine

The Alfa Romeo Twin Cam engine is an all-alloy inline-four engine series produced by Alfa Romeo from 1954 to 1994. In Italian it is known as the "bialbero" ("twin-shaft"), and has also been nicknamed the "Nord" (North) engine in reference to its being built in Portello, Milan, in the North of Italy and to distinguish it from the Alfa Romeo Boxer engine built in the South (Sud) for the Alfasud.

<span class="mw-page-title-main">Ferrari 288 GTO</span> Motor vehicle

The Ferrari GTO is an exotic homologation version of the Ferrari 308 GTB produced from 1984 until 1987 in Ferrari's Maranello factory. It was designated GT for Gran Turismo and O for Omologata.

<span class="mw-page-title-main">Alfa Romeo Giulietta (2010)</span> Italian compact hatchback

The Alfa Romeo Giulietta is a hatchback manufactured and marketed by Alfa Romeo, as a 5-door subcompact executive car. Production started near the end of 2009 and the model was introduced at the March 2010 Geneva Motor Show. The Giulietta placed second in the 2011 European Car of the Year awards. In 2020, Alfa Romeo announced that they were going to axe the Giulietta and production ended on 22 December 2020 spanning 10 years of sales from a period of 2010 to 2020. In total 469,067 examples were produced until 2020.

<span class="mw-page-title-main">Alfa Romeo V6 engine</span> Reciprocating internal combustion engine

The Alfa Romeo V6 engine is a 60° V6 engine made by Alfa Romeo from 1979 to 2005. It was developed in the early 1970s by Giuseppe Busso, and first used on the Alfa 6 with a displacement of 2.5 L (2,492 cc) and a SOHC 12-valve cylinder head. Later versions ranged from 1,996 to 3,179 cc and had DOHC 24-valve valvetrains. The original design had short pushrods for the exhaust valves in a design similar to earlier Lancia Fulvia engines. The first DOHC version was in the 1993 Alfa Romeo 164, with an aluminium alloy engine block and head with sodium filled exhaust valves.

<span class="mw-page-title-main">Alfa Romeo MiTo</span> Italian supermini hatchback

The Alfa Romeo MiTo is a front-wheel drive, three-door supermini designed by Centro Stile Alfa Romeo and presented in 2008 at Castello Sforzesco in Milan with an international introduction at the British Motor Show in 2008. The MiTo was marketed across a single generation from 2008 to 2018, sharing the Fiat Small platform with the Fiat Grande Punto. Production reached 293,428 at FCA's Mirafiori plant.

<span class="mw-page-title-main">Cesare Fiorio</span> Italian racing driver and motorsport manager (born 1939)

Cesare Fiorio is a former Formula One sporting director for Ferrari, Ligier and Minardi, and former team manager of Lancia's factory World Rally Championship team. He is currently employed as a TV commentator. His son Alessandro "Alex" Fiorio became a professional rally driver.

The Turin Motor Show is an auto show held annually in Turin, Italy. The first official show took place between 21 and 24 April 1900, at the Castle of Valentino, becoming a permanent fixture in Turin from 1938 having shared it with Milan and Rome until that time. From 1972, the show was held biannually and in 1984, it moved into Fiat's shuttered Lingotto factory.

<span class="mw-page-title-main">Lancia LC2</span> Series of racing cars by Italian automobile manufacturer Lancia

The Lancia LC2 was a series of racing cars built by Italian automobile manufacturer Lancia and powered by engines built by their sister company Ferrari. They were part of Lancia's official factory-backed effort in the World Sportscar Championship from 1983 to 1986, although they continued to be used by privateer teams until 1991. They were also the company's first car meeting the FIA's new Group C regulations for sports prototypes.

<span class="mw-page-title-main">Abarth 1000 GT Coupé</span> Motor vehicle

The Abarth 1000 GT Coupé or Alfa Romeo 1000 Abarth GT Bertone Coupé is a prototype car made by the Italian car producer Abarth in collaboration with Alfa Romeo, and designed by Franco Scaglione for Bertone. Three cars were built; one example survives, rebodied by Luigi Colani.

<span class="mw-page-title-main">Alfa Romeo SE 048SP</span> Racing car model

The Alfa Romeo SE 048SP was a Group C racing car built by Alfa Romeo in the early 1990s. Designed to replace the Lancia LC2 after the Group C regulations had undergone a major revamp, the SE 048SP had an Abarth-developed chassis mated to the 3.5-litre V10 engine from the stillborn Alfa Romeo 164 Procar, but, although at least one SE 048SP was built, it never left the development phase. The V10 engine appears to have been replaced by a Ferrari-sourced 3.5-litre V12 engine at some point during its development, although this was never officially confirmed by Alfa Romeo.

<span class="mw-page-title-main">Nicola Materazzi</span> Italian mechanical engineer (1939–2022)

Nicola Materazzi was an Italian mechanical engineer who developed several sports and racing cars, including the Ferrari 288 GTO, Ferrari F40, Bugatti EB110, and B Engineering Edonis. He was one of Italy's leading turbocharging specialists from the mid-1970s, a respected sports car and motorcycle engineer, and is sometimes referred to as "Mr. F40" or the "father of the F40."

The Alfa Romeo Tipo 1035 is a naturally-aspirated, 3.5-liter, V10 racing engine, designed and built by Alfa Romeo. It was originally specially designed for the Ligier Formula One team, but was later used in the experimental Alfa Romeo 164 Procar touring car, and the Alfa Romeo SE 048SP Group C sports prototype race car.

References

  1. ↑ "Lancia LC2". www.fcaheritage.com.
  2. 1 2 "8W - What? - Ferrari at Indianapolis". 8w.forix.com.
  3. ↑ "1983 - 1986 Lancia LC2 - Images, Specifications and Information". Ultimatecarpage.com.
  4. ↑ "Lancia LC2 - Into the Lion's Den". www.classicdriver.com.
  5. ↑ "1983→1986 Lancia LC2 | Lancia". April 21, 2016.
  6. ↑ "Lancia LC2". May 30, 2020.
  7. ↑ Florea, Ciprian (November 7, 2021). "1984 Lancia LC2 Le Mans Prototype Hits Public Roads, Goes Full Throttle on the Highway". autoevolution.
  8. ↑ "1985 Lancia LC2 Group C". Girardo & Co.
  9. ↑ "Lancia LC2: The Not-Ferrari Le Mans Car Too Fast To Win". Jalopnik. 25 December 2016.
  10. ↑ "What's It Like Driving A Rare Lancia Le Mans Race Car On The Road?". Carscoops. November 8, 2021.
  11. ↑ "Lancia racing history endures in John Campion's LC2". May 4, 2017.
  12. ↑ "The stunning, underachieving Lancia LC2". Motor Sport Magazine.
  13. 1 2 "Lancia LC2". UltimateCarPage.com. Archived from the original on 2021-02-10. Retrieved 2007-12-04.
  14. 1 2 3 "Lancia LC2 – Into the Lion's Den". Auto Italia. August 2004. Archived from the original on 2021-02-10. Retrieved 2007-12-04.
  15. ↑ Sackey, Joe (2013). Ferrari 288 GTO. Dorchester: Veloce Publishing. p. 5. ISBN   978-1845842734.
  16. ↑ Goodfellow, Winston (2014). Ferrari Hypercars. Beverly: Motorbooks. p. 96. ISBN   978-0760346082.
  17. ↑ Mantovani, Alberto (2018). Ferrari: Le Turbo Otto Cilindri. New York: Youcanprint SelfPublishing. p. 140. ISBN   978-8827844403.
  18. ↑ Delbo, We sit down with the man who engineered the Ferrari F40 and 288 GTO, archived from the original on 2021-02-10, retrieved 2020-04-01
  19. ↑ Reggiani (10 December 2012), Lancia LC2: così è rinato un gioiello tecnologico (in Italian), archived from the original on 2021-02-10, retrieved 2020-04-01
  20. ↑ Cironi, Materazzi Racconta: Ferrari F40 (in Italian), archived from the original on 2021-02-10, retrieved 2020-04-01
  21. ↑ "An Encapsulated History of Sports Car Racing". Mulsanne's Corner. Archived from the original on 2021-02-10. Retrieved 2008-03-25.
  22. ↑ Hamilton, Maurice, ed. (1984). Autocourse 1984–1985. Hazleton Publishing. p. 234. ISBN   0-905138-32-5.
  23. ↑ Remi Hubert. "Lancia LC2". Gurney Flap. Archived from the original on 2021-02-10. Retrieved 2008-03-28.
  24. ↑ "Lancia Belter". Motor Sport Magazine.
  25. ↑ "Lancia Chassis Numbers". World Sports Racing Prototypes. 1 October 2005. Archived from the original on 20 October 2007. Retrieved 2008-02-27.
  26. ↑ Collins, Peter (1 December 2012). Alfa Romeo 155/156/147 Competition Touring Cars: The Development and Racing History. Veloce Publishing Ltd. pp. 17–18. ISBN   9781845843427. Archived from the original on 10 February 2021. Retrieved 11 March 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.