Goderich 35

Last updated

Goderich 35
Development
Designer Ted Brewer
Location Canada
Year1977
Builder(s) Huromic Metal Industries Limited
Role Cruiser
NameGoderich 35
Boat
Boat weight 17,000 lb (7,711 kg)
Draft 4.75 ft (1.45 m)
Hull
Type Monohull
Construction Steel
LOA 35.67 ft (10.87 m)
LWL 28.33 ft (8.63 m)
Beam 11.50 ft (3.51 m)
Engine type Volvo 24 hp (18 kW) diesel engine
Hull appendages
Keel/board typemodified long keel
Ballast6,200 lb (2,812 kg)
Rudder(s) skeg-mounted rudder
Rig
Rig type Bermuda rig
Sails
Sailplan Cutter rigged sloop
Total sail area649.00 sq ft (60.294 m2)
[ edit on Wikidata]

The Goderich 35, also known as the Huromic 35, is a Canadian sailboat that was designed by Ted Brewer of Brewer, Walstrom and Associates, as a cruiser and first built in 1977. [1] [2] [3]

Contents

Production

The design was built by Huromic Metal Industries Limited in Canada, but it is now out of production. [1] [3]

Design

The Goderich 35 is a recreational keelboat, built predominantly of steel, with wood trim. It has a cutter rig sloop rig, a spooned raked stem, a plumb transom, a keel-mounted rudder controlled by a tiller and a fixed modified long keel, with a cutaway forefoot. It displaces 17,000 lb (7,711 kg) and carries 6,200 lb (2,812 kg) of ballast. The hull is made from steel, painted with urethane paint. [1] [3] Some of the boats were built with 37 foot LOAs, using an extended stern overhang and some were built with ketch rigs. [4]

The boat has a draft of 4.75 ft (1.45 m) with the standard keel fitted. [1]

The cutter staysail is mounted on a boom and the design uses no bowsprit. [3]

The boat is fitted with a Swedish Volvo diesel engine of 24 hp (18 kW) for docking and maneuvering. The fuel tank holds 35 U.S. gallons (130 L; 29 imp gal) and the fresh water tank has a capacity of 75 U.S. gallons (280 L; 62 imp gal). [1]

Below decks sleeping accommodation includes a bow "V"-berth, two main cabin settee berths and a pilot berth aft on the starboard side. The galley is located on the port side, at the foot of the companionway steps. It includes a three-burner stove and 14 cu ft (0.40 m3) icebox. The head is located forward and has a door for access from the main cabin and one from the forward cabin. [3]

Ventilation is provided by five opening ports and five portlights, plus a main cabin hatch. [3]

The steel hull is constructed from welded radius-rolled sheet steel used in the bilge area, in between flatter sheet steel in the sides and hull bottom. [4]

Operational history

Reviewer Richard Sherwood wrote in 1994, "this steel cutter is built in Canada. Stiffness comes from the beam, as the ballast is moderate. The ballast/displacement ratio is 37 percent. To minimize sweating, the hull is insulated with urethane foam." [3]

Marvin Creamer, a geography professor from New Jersey did a circumnavigation in a Goderich 35, Globe Star, starting 21 December 1982 from Cape May, New Jersey, completing the voyage with use of any instruments, save an hourglass to determine watch lengths. The trip was completed on 17 May 1984, after 18 months, including 11 months at sea. [4]

Another Goderich 35, Nomad, was built with aluminum construction for Ed Arnold in Washington state. It was shipped by road to the US east coast and he sailed it to Europe. On the return voyage Arnold sailed it around Cape Horn and on to Sitka, Alaska. He later used the boat to do a solo circumnavigation, intended to be non-stop. He completed it between 1 October 2001 and 6 September 2002, including a month for repairs at the Royal Cape Yacht Club in Cape Town after hitting an iceberg and a stop in Adelaide, Australia, to have his radar repaired. [4]

See also

Similar sailboats

Related Research Articles

The C&C 34/36 is a Canadian sailboat series, designed by Robert W. Ball and first built in 1989. Ball was the chief designer for C&C Yachts between 1969 and 1991.

The Island Packet 29 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1981.

The Island Packet 35 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1988.

The Southern Cross 28, also called the Gillmer 28, is an American sailboat that was designed by Thomas C. Gillmer and first built in 1978.

The Cape Dory 33 is an American sailboat that was designed by Carl Alberg as cruiser and first built in 1980.

The Coast 34 is a Canadian sailboat that was designed by Bruce Roberts and Grahame Shannon as a cruiser and first built in 1980.

The Cal 35 is an American sailboat that was designed by C. William Lapworth as a cruiser and first built in 1979.

The Southern Cross 35, also called the Gillmer 35, is an American sailboat that was designed by Thomas C. Gillmer as a cruiser and first built in 1978.

The Pilot 35 is an American sailboat that was designed by Sparkman & Stephens as a racer-cruiser and first built in 1962.

The Vancouver 36 is an American sailboat that was designed by Robert B. Harris as a bluewater ocean cruiser and first built in 1977.

The Hinterhoeller F3 is a Canadian sailboat that was designed by Argentine naval architect Germán Frers as a racer-cruiser and first built in 1981.

The Crealock 37, also called the Pacific Seacraft 37, is an American sailboat that was designed by British naval architect W. I. B. Crealock as a cruiser and first built in 1978.

The Dickerson 37 is an American sailboat that was designed by George Hazen as a cruiser and first built in 1980.

The Alajuela 38 is an American sailboat that was designed by William Atkin as a cruiser and first built in 1977.

The Corbin 39 is a Canadian sailboat that was designed by Robert Dufour and Marius Corbin as a global circumnavigation cruiser and first built in 1979.

The Bristol 40 is an American sailboat that was designed by Ted Hood as a racer-cruiser and first built in 1970.

The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.

Tayana 37 Sailboat class

The Tayana 37 is a Taiwanese sailboat that was designed by Robert Perry as a cruiser and first built in 1976.

The Eastsail 25 is an American trailerable sailboat that was designed by Eliot Spalding as an off-shore cruiser and first built in 1984.

The Seafarer 36C is an American sailboat that was designed by Philip Rhodes as a cruiser and first built in 1968. The boat was built with a ketch rig or an optional sloop rig, without the mizzen mast, but with a taller main mast. The design was based on Rhodes Design #702.

References

  1. 1 2 3 4 5 McArthur, Bruce (2019). "Goderich 35 sailboat". sailboatdata.com. Archived from the original on 13 August 2019. Retrieved 19 January 2020.
  2. ↑ McArthur, Bruce (2019). "Edward S. Brewer". sailboatdata.com. Archived from the original on 13 August 2019. Retrieved 19 January 2020.
  3. 1 2 3 4 5 6 7 Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 284-285. Houghton Mifflin Company, 1994. ISBN   0-395-65239-1
  4. 1 2 3 4 "Question of the Month with Designer Ted Brewer (#3)". Sail Far, Live Free. Archived from the original on 29 June 2019. Retrieved 19 January 2020.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.