Green Satin radar

Last updated

Green Satin, also known as ARI 5851, was a Doppler radar system developed by the Royal Air Force as an air navigation aid. The system provided direct measures of the drift speed and direction, and thereby allowed accurate calculation of the winds aloft. These values were then fed into the Navigation and Bombing System.

Contents

It was originally specified in 1949 as OR.3015 for the English Electric Canberra bomber. The first examples arrived in 1953, [1] and it was soon fitted operationally. It was subsequently used on the V bomber fleet. It remained in use on the V-bombers until the Avro Vulcans 1969 when it was replaced by the Decca 73. Handley Page Victors may have used it until they left service in 1993.

The name comes from an era when the Ministry of Supply used random combinations of colours and code words to prevent their code names being too literal. A version known as Blue Silk with lower top-speed limits was used in some marks of Canberra and Royal Navy aircraft.

Background

In air navigation there are six values of interest; airspeed, heading (the compass angle the nose is pointing), ground speed, course (the compass angle of the actual motion), wind speed and wind direction. Using any four of these values and basic vector addition, the other values can be determined through the wind triangle. Once determined, the path of the aircraft can be accurately calculated using dead reckoning in comparison to an original fixed point.

Airspeed and heading can be measured with a fair degree of accuracy using onboard measurements, namely the airspeed indicator and gyrocompass. Since the aircraft flies within the air mass, it is not possible to directly measure wind values, so their determination must be carried out with reference to some external measure. For most of the history of air navigation, this was accomplished through a reverse dead reckoning process, timing the passage of objects on the ground to measure ground speed, and either estimating the drift or measuring it with simple optical instruments like the drift meter. Both are inherently inaccurate, with the US Navy suggesting such measures are accurate to only 10%.

Green Satin provided accurate and immediate measurements of the true ground speed and the drift angle. Combined with the airspeed and heading, air navigation complexity was greatly reduced. However, accurate dead reckoning also requires an accurate original "fix" from which future movements are determined. In practice, Gee would be used to take a fix after the aircraft reached cruise altitude and speed, and would be used to fine-tune the navigation until it passed out of Gee range, perhaps 300 to 450 nautical miles.

Development

Green Satin started life in Operational Requirement (OR) 3015 in 1949. This called for a device to provide an accurate measure of the groundspeed of an aircraft to within 0.2 percent while flying at any speed between 100 and 700 knots at all altitudes up to 60,000 feet. It also had to measure the drift angle up to 20 degrees on either side of the heading, with an accuracy of less than 0.1 degree. It had to make these measurements over land or water, in any weather. [2]

The solution to measuring ground speed was already well understood at the time, using a Doppler radar system to compare the returned frequency of two or more signals. Green Satin used four such signals to determine both ground speed and drift angle, which were sent out simultaneously by a single cross-shaped antenna with feed horns at the four ends. In its neutral position, facing forward, one set of antennas sent out two signals aligned slightly fore and aft, and the other set slightly to the port and starboard side. Each pair of signals was sent into a separate frequency comparator, with the output being the difference in frequencies represented by a voltage. [3]

Consider an aircraft flying over the ground with no wind. In this case, the velocity to the side is zero, so the port and starboard signals will return to the aircraft at the same frequency. When sent through their comparator, the output is zero voltage, indicating no sideways drift. Now consider the case where the aircraft is being blown to the right. In this case, the starboard signal will be shifted upwards in frequency and the port signal downwards. The speed of the movement is not of interest, only the angle. To measure the angle, the entire antenna array was mounted on a motorized pivot and rotated back and forth until the output was zero again. [3]

Once the drift angle is accurately measured, the antenna will be pointing directly in the direction of the drift. Any difference in frequency between the fore and aft pointing signals at this point is thus a measure of the ground speed. [3]

Green Satin was a pulsed system, although it was not a pulse-Doppler radar in the typical meaning. Pulses were used in order to allow a single antenna to be used for both broadcast and reception, not to measure distance (or in this case, altitude) through pulse timing. Frequencies were compared within a single pulse (a monopulse radar), so the high frequency stability over longer multi-pulse times was not required. Green Satin was thus based on a simple cavity magnetron generator, rather than the more frequency-stable solutions like the klystron. [4]

The electronics were housed within two pressurized canisters mounted on large backplanes that included power supplies and various electrical connections. These were mounted above the cabin area on the rear bulkhead of the Canberra. [4] Some of these maintained their pressurization decades after being decommissioned.

Data from the Green Satin was fed into the Navigation and Bombing System (NBS), a mechanical computer that calculated the current location of the aircraft through the continual dead reckoning of the inputs. Most of these inputs were automatically fed from various aircraft instruments, but Green Satin data was normally fed in manually. The output of the NBS was the calculated latitude and longitude based solely on airspeed and heading, the values from the Green Satin were then added to these to produce the final outputs in the navigation computer. These outputs also drove correction circuits in the H2S Mk. IX bombing radars and Mark XIV bomb sight to adjust the predicted bomb trajectories. [3]

Testing

In order to determine the operational accuracy of Green Satin, a lengthy series of test flights over land and water were carried out from an early Canberra. However, for these tests the G4B gyrocompass proved far too inaccurate as it required constant correction for drift. And while Gee was accurate enough for the purpose, taking a fix required lengthy manual calculation by the operator. The test program demanded additional equipment to solve both of these problems. [5]

Accurate heading information was supplied by the Azimuth Datum Instrument (ADI), a star tracker mounted on a periscope so that it projected its display on a plate in front of the navigator. [6] Using angle measurements similar to those taken with a sextant, the aircraft heading could be accurately determined. For initial position fixes, Gee was replaced with the Decca Navigator System (Mark 6), which directly output measurements on three dials. [7]

By locating both the ADI and Decca output on the navigation console, along with the Green Satin outputs, a movie camera was able to record everything in real time for later data analysis on the ground. This consisted of taking a snapshot of the settings every six seconds and then averaging the instrument positions. [8] Testing demonstrated that accuracy of Green Satin over land in straight and level flight was less than ±0.1% of distance flown, and less than ±0.1 of a degree in drift. [9]

In use

The Green Satin was initially used with a simple display system with two large dials presenting true ground speed in knots on the left, and drift angle on the right. The output from this system was typically sent, along with the G4 compass' output, to the Mark 4 Ground Position Indicator (GPI). The GPI was a simple mechanical computer that integrated the inputs to produce an offset from a user-provided initial location (taken from Gee, for instance), and presented this as either latitude and longitude or grid reference numbers on two odometer-like displays.

Green Satin initially equipped the Canberra force, but was soon used on most larger RAF aircraft. Problems locking on to a calm sea surface meant Decca navigational equipment had to be used instead during Grapple bomb aiming from Valiant aircraft.

Other applications

Green Satin was also used in combination with a second radar system named Red Setter to produce a side looking airborne radar (SLAR) system. [lower-alpha 1] This used the antenna and electronics from an H2S Mark IXA, but turned off the scanning motor so it normally pointed to one side of the aircraft. The drift angle from the Green Satin was fed into the motor to make minor adjustments to keep the antenna aligned at right angles to the aircraft's ground track, independent of the heading. [3]

The CRT display used by the normal H2S was fitted with a film system with a motorized takeup reel. The motor was connected to the ground speed output of the Green Satin, so it drew the film across the front of the display at a set speed independent of the airspeed. With the scanning motor turned off, the display on the CRT was a single line, modulated in brightness by the returns at various distances from the aircraft. This exposed the film, producing a 2D image of the land to one side of the aircraft. [3]

The film was pulled through a rapid developer system produced by Kelvin Hughes, who made similar systems for a variety of purposes. The film was processed and ready for viewing after a short delay. [3]

See also

Notes

  1. Lovell claims this was known as "Red Neck", but this name was for a different SLAR system.

Related Research Articles

<span class="mw-page-title-main">Radar</span> Object detection system using radio waves

Radar is a system that uses radio waves to determine the distance (ranging), direction, and radial velocity of objects relative to the site. It is a radiodetermination method used to detect and track aircraft, ships, spacecraft, guided missiles, motor vehicles, map weather formations, and terrain.

<span class="mw-page-title-main">Doppler radar</span> Type of radar equipment

A Doppler radar is a specialized radar that uses the Doppler effect to produce velocity data about objects at a distance. It does this by bouncing a microwave signal off a desired target and analyzing how the object's motion has altered the frequency of the returned signal. This variation gives direct and highly accurate measurements of the radial component of a target's velocity relative to the radar. The term applies to radar systems in many domains like aviation, police radar detectors, navigation, meteorology, etc.

<span class="mw-page-title-main">Radio navigation</span> Use of radio-frequency electromagnetic waves to determine position on the Earths surface

Radio navigation or radionavigation is the application of radio frequencies to determine a position of an object on the Earth, either the vessel or an obstruction. Like radiolocation, it is a type of radiodetermination.

<span class="mw-page-title-main">Omega (navigation system)</span> First global radio navigation system for aircraft

OMEGA was the first global-range radio navigation system, operated by the United States in cooperation with six partner nations. It was a hyperbolic navigation system, enabling ships and aircraft to determine their position by receiving very low frequency (VLF) radio signals in the range 10 to 14 kHz, transmitted by a global network of eight fixed terrestrial radio beacons, using a navigation receiver unit. It became operational around 1971 and was shut down in 1997 in favour of the Global Positioning System.

<span class="mw-page-title-main">Gee (navigation)</span> Radio navigation system

Gee, sometimes written GEE, was a radio-navigation system used by the Royal Air Force during World War II. It measured the time delay between two radio signals to produce a fix, with accuracy on the order of a few hundred metres at ranges up to about 350 miles (560 km). It was the first hyperbolic navigation system to be used operationally, entering service with RAF Bomber Command in 1942.

<span class="mw-page-title-main">Distance measuring equipment</span> Radio navigation technology used in aviation

In aviation, distance measuring equipment (DME) is a radio navigation technology that measures the slant range (distance) between an aircraft and a ground station by timing the propagation delay of radio signals in the frequency band between 960 and 1215 megahertz (MHz). Line-of-visibility between the aircraft and ground station is required. An interrogator (airborne) initiates an exchange by transmitting a pulse pair, on an assigned 'channel', to the transponder ground station. The channel assignment specifies the carrier frequency and the spacing between the pulses. After a known delay, the transponder replies by transmitting a pulse pair on a frequency that is offset from the interrogation frequency by 63 MHz and having specified separation.

Ground speed is the horizontal speed of an aircraft relative to the Earth’s surface. It is vital for accurate navigation that the pilot has an estimate of the ground speed that will be achieved during each leg of a flight.

<span class="mw-page-title-main">H2S (radar)</span> First airborne, ground scanning radar system WWII

H2S was the first airborne, ground scanning radar system. It was developed for the Royal Air Force's Bomber Command during World War II to identify targets on the ground for night and all-weather bombing. This allowed attacks outside the range of the various radio navigation aids like Gee or Oboe, which were limited to about 350 kilometres (220 mi) of range from various base stations. It was also widely used as a general navigation system, allowing landmarks to be identified at long range.

<span class="mw-page-title-main">Oboe (navigation)</span> British bomb aiming system

Oboe was a British bomb aiming system developed to allow their aircraft to bomb targets accurately in any type of weather, day or night. Oboe coupled radar tracking with radio transponder technology. The guidance system used two well-separated radar stations to track the aircraft. Two circles were created before the mission, one around each station, such that they intersected at the bomb drop point. The operators used the radars, aided by transponders on the aircraft, to guide the bomber along one of the two circles and drop the bombs when they reached the intersection.

Gee-H, sometimes written G-H or GEE-H, was a radio navigation system developed by Britain during the Second World War to aid RAF Bomber Command. The name refers to the system's use of the earlier Gee equipment, as well as its use of the "H principle" or "twin-range principle" of location determination. Its official name was AMES Type 100.

<span class="mw-page-title-main">Terrain-following radar</span> Radar used for extremely low level flight

Terrain-following radar (TFR) is a military aerospace technology that allows a very-low-flying aircraft to automatically maintain a relatively constant altitude above ground level and therefore make detection by enemy radar more difficult. It is sometimes referred to as ground hugging or terrain hugging flight. The term nap-of-the-earth flight may also apply but is more commonly used in relation to low-flying military helicopters, which typically do not use terrain-following radar.

Monopulse radar is a radar system that uses additional encoding of the radio signal to provide accurate directional information. The name refers to its ability to extract range and direction from a single signal pulse.

<span class="mw-page-title-main">Bombsight</span> Aircraft system for aiming bombs

A bombsight is a device used by military aircraft to drop bombs accurately. Bombsights, a feature of combat aircraft since World War I, were first found on purpose-designed bomber aircraft and then moved to fighter-bombers and modern tactical aircraft as those aircraft took up the brunt of the bombing role.

<span class="mw-page-title-main">Wind triangle</span>

In air navigation, the wind triangle is a graphical representation of the relationship between aircraft motion and wind. It is used extensively in dead reckoning navigation.

<span class="mw-page-title-main">Drift meter</span>

A drift meter, also drift indicator and drift sight, is an optical device used to improve dead reckoning for aircraft navigation by measuring wind effect on flight.

<span class="mw-page-title-main">LORAN</span> Radio navigation system

LORAN, short for long range navigation, was a hyperbolic radio navigation system developed in the United States during World War II. It was similar to the UK's Gee system but operated at lower frequencies in order to provide an improved range up to 1,500 miles (2,400 km) with an accuracy of tens of miles. It was first used for ship convoys crossing the Atlantic Ocean, and then by long-range patrol aircraft, but found its main use on the ships and aircraft operating in the Pacific theater during World War II.

<span class="mw-page-title-main">AIRPASS</span> British interceptor radar/avionics system

AIRPASS was a British aircraft interception radar and fire-control radar system developed by Ferranti. It was the world's first airborne monopulse radar system and fed data to the world's first head-up display. The name is an acronym for "Aircraft Interception Radar and Pilot's Attack Sight System". In the Royal Air Force (RAF) it was given the official name Radar, Aircraft Interception, Mark 23, normally shortened to AI.23. AIRPASS was used on the English Electric Lightning throughout its lifetime.

The Navigation and Bombing System, or NBS, was a navigation system used in the Royal Air Force's V-bomber fleet. Primary among its parts was the Navigation and Bombing Computer (NBC), a complex electromechanical computer that combined the functions of dead reckoning navigation calculation with a bombsight calculator to provide outputs that guided the aircraft and automatically dropped the bombs with accuracy on the order of a few hundred metres on missions over thousands of kilometres.

A Doppler velocity sensor (DVS) is a specialized Doppler radar that uses the Doppler effect to measure the three orthogonal velocity components referenced to the aircraft. When aircraft true heading, pitch and roll are provided by other aircraft systems, it can function as a navigation sensor to perform stand-alone dead reckoning navigation calculations as a Doppler Navigation Set (DNS).

<span class="mw-page-title-main">ASV Mark III radar</span>

Radar, Air-to-Surface Vessel, Mark III, or ASV Mk. III for short, was a surface search radar system used by RAF Coastal Command during World War II. It was a slightly modified version of the H2S radar used by RAF Bomber Command, with minor changes to the antenna to make it more useful for the anti-submarine role. It was Coastal Command's primary radar from the spring of 1943 until the end of the war. Several improved versions were introduced, notably the ASV Mark VI, which replaced most Mk. IIIs from 1944 and ASV Mark VII radar, which saw only limited use until the post-war era.

References

Citations

  1. Furner 1997, p. 93.
  2. Furner 1997, p. 92.
  3. 1 2 3 4 5 6 7 Lovell 1991, p. 259.
  4. 1 2 Lambert 2005.
  5. Furner 1997, pp. 93–94.
  6. Furner 1997, pp. 94–95.
  7. Furner 1997, p. 94.
  8. Furner 1997, pp. 97–98.
  9. Furner 1997, p. 98.

Bibliography

  • Pannu, Anandeep. "Canberra : Photo Reconnaissance Marks PR.57 and PR.67". Archived from the original on 2013-05-10. Retrieved 2012-05-17.
  • Furner, Jack (1997). "Chapter 9: Developments in the Early 1950s" (PDF). History of Air Navigation in the RAF. pp. 92–97. Archived from the original (PDF) on 2017-08-03. Retrieved 2017-08-03.
  • Lambert, Malcolm (March 2005). "Canberra PR.3 WF922 at Midland Aviation Museum". Midland Aviation Museum.
  • Lovell, Bernard (1991). Echoes of War: The Story of H2S Radar. CRC Press. ISBN   9780852743171.