Growling (wind instruments)

Last updated

Growling is a musical technique where the instrumentalist vocalizes into the instrument to alter quality of the sound. Growling is used primarily in rock and blues style playing, it is also frequently used in klezmer music; it is popular in the woodwind family of instruments, especially the saxophone, though it is also commonly used on brass instruments, as well. It is commonly used by mainstream artists such as Ben Webster, Illinois Jacquet and Earl Bostic. [1] Outside of these styles and instruments, it is often considered a novelty effect.

Contents

The growl gives the performer's sound a dark, guttural, gritty timbre resulting largely from the rustle noise and desirable consonance and dissonance effects produced. The technique of simultaneous playing a note and singing into an instrument is also known as horn chords or multiphonics.

Method

The most common and effective method of woodwind growling is to hum, sing, or even scream into the mouthpiece of the instrument. [2] This method introduces interference within the instrument itself, breaking up the normal quality of sound waves produced. Furthermore, the vibration of the vocal note in the mouth and lips creates rustle noise in the instrument.

The vocally produced note can be the same note (though this is believed to be less effective), a natural third or perfect fifth, or any random note, usually from a different octave than the note the instrument is producing. The latter choice is believed to cause the most interference and yield the darkest, grittiest timbre.

Alternate methods

A woodwind growl can also be produced by allowing air to escape from around the corners of the mouth, causing a vibration in the lips and mouthpiece. Although this method does not set up patterns of interference, it does produce the characteristic rustle noise of the growl.

Alternately, it is possible to use multiphonic fingering to create a growl-like effects. The performer selects a bizarre or unusual fingering that causes the instrument to attempt to sound on multiple notes. This creates interference, but no beating or rustle noise.

Other methods include constricting the airway to create a "rasp".

Use in other instruments

A "growl" can be produced by instruments outside of the woodwind family such as the trumpet or the trombone. Bubber Miley is often referred to as "growl trumpeter". A "growl trombone" may be seen in a 1929 film Black and Tan Fantasy played by Joe "Tricky Sam" Nanton.

Harmonica players have started growling as well by using a technique similar to bending notes which causes the reeds to project a raspy guttural sound.

See also

Notes

  1. Saxophone Tone & Effects – Growl
  2. Saxophone Growl effect, how to growl on Sax to get that dirty sax sound

Related Research Articles

Bassoon Double-reed woodwind instrument

The bassoon is a woodwind instrument in the double reed family, which plays in the tenor and bass ranges. It is composed of six pieces, and is usually made of wood. It is known for its distinctive tone color, wide range, versatility, and virtuosity. It is a non-transposing instrument and typically its music is written in the bass and tenor clefs, and sometimes in the treble. There are two forms of modern bassoon: the Buffet and Heckel systems. It is typically played while sitting using a seat strap, but can be played while standing if the player has a harness to hold the instrument. Sound is produced by rolling both lips over the reed and blowing direct air pressure to cause the reed to vibrate. Its fingering system can be quite complex when compared to those of other instruments. Appearing in its modern form in the 19th century, the bassoon figures prominently in orchestral, concert band, and chamber music literature, and is occasionally heard in pop, rock, and jazz settings as well. One who plays a bassoon is called a bassoonist.

Saxophone Single-reed woodwind instrument

The saxophone is a type of single-reed woodwind instrument with a conical body, usually made of brass. As with all single-reed instruments, sound is produced when a reed on a mouthpiece vibrates to produce a sound wave inside the instrument's body. The pitch is controlled by opening and closing holes in the body to change the effective length of the tube. The holes are closed by leather pads attached to keys operated by the player. Saxophones are made in various sizes and are almost always treated as transposing instruments. Saxophone players are called saxophonists.

Trumpet Brass instrument

The trumpet is a brass instrument commonly used in classical and jazz ensembles. The trumpet group ranges from the piccolo trumpet with the highest register in the brass family, to the bass trumpet, which is pitched one octave below the standard B or C Trumpet.

Overtone Tone with a frequency higher than the frequency of the reference tone

An overtone is any harmonic with frequency greater than the fundamental frequency of a sound. In other words, overtones are all pitches higher than the lowest pitch within an individual sound; the fundamental is the lowest pitch. While the fundamental is usually heard most prominently, overtones are actually present in any pitch except a true sine wave. The relative volume or amplitude of various overtone partials is one of the key identifying features of timbre, or the individual characteristic of a sound.

Wah-wah is an imitative word for the sound of altering the resonance of musical notes to extend expressiveness, sounding much like a human voice saying the syllable wah. The wah-wah effect is a spectral glide, a "modification of the vowel quality of a tone".

Mute (music) Device attached to musical instrument to change its sound

A mute is a device attached to a musical instrument which changes the instrument's tone quality (timbre) or lowers its volume. Mutes are commonly used on string and brass instruments, especially the trumpet and trombone, and are occasionally used on woodwinds. Their effect is mostly intended for artistic use, but they can also allow players to practice discreetly. Muting can also be done by hand, as in the case of palm muting a guitar or grasping a triangle to dampen its sound.

Overblowing is the manipulation of supplied air through a wind instrument that causes the sounded pitch to jump to a higher one without a fingering change or the operation of a slide. Overblowing may involve a change in the air pressure, in the point at which the air is directed, or in the resonance characteristics of the chamber formed by the mouth and throat of the player.

Extended technique Unorthodox methods of singing or of playing musical instruments

In music, extended technique is unconventional, unorthodox, or non-traditional methods of singing or of playing musical instruments employed to obtain unusual sounds or timbres.

Tenor saxophone Type of saxophone

The tenor saxophone is a medium-sized member of the saxophone family, a group of instruments invented by Adolphe Sax in the 1840s. The tenor and the alto are the two most commonly used saxophones. The tenor is pitched in the key of B (while the alto is pitched in the key of E), and written as a transposing instrument in the treble clef, sounding an octave and a major second lower than the written pitch. Modern tenor saxophones which have a high F key have a range from A2 to E5 (concert) and are therefore pitched one octave below the soprano saxophone. People who play the tenor saxophone are known as "tenor saxophonists", "tenor sax players", or "saxophonists".

A multiphonic is an extended technique on a monophonic musical instrument in which several notes are produced at once. This includes wind, reed, and brass instruments, as well as the human voice. Multiphonic-like sounds on string instruments, both bowed and hammered, have also been called multiphonics, for lack of better terminology and scarcity of research.

Split tones are a multiphonic effect on brass instruments. During normal play, the upper and lower lips will vibrate together at the same speed. If, however, the lips are set to vibrate at different speeds two pitches may be perceived. When not done intentionally, split tones are referred to pejoratively as "double buzzing".

Ophicleide Type of wind instrument

The ophicleide is a keyed brass instrument similar to the tuba. It is a conical-bore keyed instrument belonging to the bugle family and has a shape similar to the sudrophone's.

Rustle noise is noise consisting of aperiodic pulses characterized by the average time between those pulses, known as rustle time (Schouten ?). Rustle time is determined by the fineness of sand, seeds, or shot in rattles, contributes heavily to the sound of sizzle cymbals, drum snares, drum rolls, and string drums, and makes subtle differences in string instrument sounds. Rustle time in strings is affected by different weights and widths of bows and by types of hair and rosin in strings. The concept is also applicable to flutter-tonguing, brass and woodwind growls, resonated vocal fry in woodwinds, and eructation sounds in some woodwinds. Robert Erickson suggests the exploration of accelerando-ritardando scales producible on some acoustic instruments and further variations in rustle noise "because this apparently minor aspect of musical sounds has a disproportionately large importance for higher levels--textures, ensemble timbres, [and] contrasts between music events."

Altissimo is the uppermost register on woodwind instruments. For clarinets, which overblow on odd harmonics, the altissimo notes are those based on the fifth, seventh, and higher harmonics. For other woodwinds, the altissimo notes are those based on the third, fourth, and higher harmonics. The altissimo register is also known as the high register.

Wind controller

A wind controller, sometimes referred to as a wind synthesizer, is an electronic wind instrument. It is usually a MIDI controller associated with one or more music synthesizers. Wind controllers are most commonly played and fingered like a woodwind instrument, usually the saxophone, with the next most common being brass fingering, particularly the trumpet. Models have been produced that play and finger like other acoustic instruments such as the recorder or the tin whistle. The most common form of wind controller uses electronic sensors to convert fingering, breath pressure, bite pressure, finger pressure, and other gesture or action information into control signals that affect musical sounds. The control signals or MIDI messages generated by the wind controller are used to control internal or external devices such as analog synthesizers or MIDI-compatible synthesizers, synth modules, softsynths, sequencers, or even non-instruments such as lighting systems.

Mouthpiece (woodwind)

The mouthpiece of a woodwind instrument is that part of the instrument which is placed partly in the player's mouth. Single-reed instruments, capped double-reed instruments, and fipple flutes have mouthpieces while exposed double-reed instruments and open flutes do not. The characteristics of a mouthpiece and reed can play a significant role on the sound of the instrument.

Musical technique Ability of musicians to exert optimal control of their instruments and/or bodies

Musical technique is the ability of instrumental and vocal musicians to exert optimal control of their instruments or vocal cords in order to produce the precise musical effects they desire. Improving one's technique generally entails practicing exercises that improve one's muscular sensitivity and agility. Technique is independent of musicality. Compositional technique is the ability and knowledge composers use to create music, and may be distinguished from instrumental or performance technique, which in classical music is used to realize compositions, but may also be used in musical improvisation. Extended techniques are distinguished from more simple and more common techniques. Musical technique may also be distinguished from music theory, in that performance is a practical matter, but study of music theory is often used to understand better and to improve techniques. Techniques such as intonation or timbre, articulation, and musical phrasing are nearly universal to all instruments.

Wind instrument Class of musical instruments with air resonator

A wind instrument is a musical instrument that contains some type of resonator in which a column of air is set into vibration by the player blowing into a mouthpiece set at or near the end of the resonator. The pitch of the vibration is determined by the length of the tube and by manual modifications of the effective length of the vibrating column of air. In the case of some wind instruments, sound is produced by blowing through a reed; others require buzzing into a metal mouthpiece, while yet others require the player to blow into a hole at an edge, which splits the air column and creates the sound.

Saxophone technique

Saxophone technique refers to the physical means of playing the saxophone. It includes how to hold the instrument, how the embouchure is formed and the airstream produced, tone production, hands and fingering positions, and a number of other aspects. Instrumental technique and corresponding pedagogy is a topic of much interest to musicians and teachers and therefore has been subjected to personal opinions and differences in approach. Over the course of the saxophone’s performance history, notable saxophonists have contributed much to the literature on saxophone technique.

The trombone is a musical instrument from the brass instrument family. Trombone's first premiere in jazz was with Dixieland Jazz as a supporting role within the Dixie Group. This role later grew into the spotlight as players such as J.J. Johnson and Jack Teagarden began to experiment more with the instrument, finding that it can fill in roles along with the saxophone and trumpet in Bebop Jazz. The trombone has since grown to be featured in standard big band group setups with 3 to 5 trombones depending on the arrangement. A person who plays the trombone is called a trombone player or a trombonist.