HMS Melita (1888)

Last updated

HMS Melita (1884) (cropped).jpg
Watercolour, 1896, by Gaetano Esposito
History
Naval Ensign of the United Kingdom.svgUnited Kingdom
NameHMS Melita
Namesake Malta (Latin)
Builder Malta Dockyard
Cost£60,179 [1]
Laid down18 July 1883 [1]
Launched20 March 1888
Commissioned27 October 1892 [2]
RenamedRingdove in December 1915
Reclassifiedsalvage vessel 1915
FateSold on 9 July 1920 to the Falmouth Docks Company
Civil Ensign of the United Kingdom.svg United Kingdom
Name
  • 1920: Ringdove’s Aid
  • 1927: Restorer
Operator
Identification Official Number: 137212 (from 1921) [3]
FateBroken up in the second quarter of 1937
General characteristics
Class and type Mariner-class composite screw sloop
Tonnage554  GRT, 214  NRT (from 1921) [3]
Displacement970 tons
Length167 ft (51 m)
Beam32 ft (9.8 m)
Draught14 ft (4.3 m) [1]
Installed power850  ihp (630 kW)
Propulsion
  • 2-cylinder horizontal compound-expansion steam engine
  • Single screw [1]
Sail plan Barque-rigged
Speed11+1⁄2 knots (21.3 km/h)
RangeApproximately 2,100 nmi (3,900 km) at 10 kn (19 km/h) [1]
Complement126
Armament

HMS Melita was a Royal Navy Mariner-class composite screw sloop of 8 guns, launched in 1888 and commissioned in 1892. She was the only significant Royal Navy warship ever to be built in Malta Dockyard, [Note 2] She was renamed HMS Ringdove in 1915 as a salvage vessel and in 1920 was sold to the Falmouth Docks Company, which changed her name to Ringdove's Aid. She was sold again in 1926 to the Liverpool & Glasgow Salvage Association, renamed Restorer, and finally broken up in 1937, 54 years after her keel was laid.

Contents

Construction

Launch of Melita Launch of HMS Melita.JPG
Launch of Melita

The last of six 8-gun Mariner-class gunvessels designed by Nathaniel Barnaby, [1] the Royal Navy Director of Naval Construction, her hull was of composite construction; that is, iron keel, frames, stem and stern posts with wooden planking. She was fitted with a 2-cylinder horizontal compound expansion steam engine driving a single screw, which was also built in the Malta Dockyard. [1] She was rigged with three masts, with square rig on the fore- and main-masts, making her a barque-rigged vessel. Her keel was laid at a special slipway built for her on the Senglea side of French Creek, which was still known as the "Melita Slip" into modern times. [2] Although laid down on 18 July 1883, [1] work progressed slowly; the entire enterprise had been designed to employ the local workforce when the Mediterranean Fleet was absent, and the fleet's frequent presence caused work on the new vessel to be halted all too often. [2] She was launched as Melita, the Latin name for the Malta, on 20 March 1888 by Princess Victoria Melita, the twelve-year-old daughter of the Duke of Edinburgh who was Commander-in-Chief of the British Mediterranean Fleet. [2] The Army and Navy Gazette reported that

The launch of the Melita, sloop at Malta Dockyard must have been quite an event in the history of the island. Under the circumstances, it would be invidious to make any remarks about the length of time she has been building. Let us hope she will prove a staunch and useful vessel. [4]

By the time she was launched, her entire class had been re-classified from gunvessels to sloops [1]

Melita was commissioned into the Royal Navy on 27 October 1892, nearly ten years after she was laid down. [2] During the 1890s she served in the Mediterranean, [5] recommissioning in October 1895, and again in October 1898. [2] While serving in Melita during this period Lieutenant (later Rear Admiral) Edward Inglefield invented the Inglefield clip for quickly attaching flags to each other - they are still in use in the Royal Navy today. In 1896 she served off the Sudanese coast, as part of the preparations for the reconquest of the Sudan. [6] While under Commander Ian M. Fraser she was as special service vessel at Constantinople when in November 1901 she was ordered to Devonport, [7] where she arrived in late December to be paid off 17 January 1902. [8]

Although it was stated by the Secretary to the Admiralty in Parliament that she would be sold, [9] instead she became a boom defence vessel at Southampton in May 1905. She was converted to a salvage vessel in December 1915, and swapped names with the Redbreast-class gunboat Ringdove, thereby becoming the sixth Ringdove to serve in the Royal Navy. [1]

HMS Melita Hmsmelita.jpg
HMS Melita

Civilian salvage vessel

Ringdove (ex-Melita) was sold to the Falmouth Docks Company on 9 July 1920, passing to Falmouth Docks & Engineering Company Ltd as Ringdove’s Aid the following year. [1] [3] In 1923 she was fitted with a new engine made by Samuel White & Co. of East Cowes, Isle of Wight. This was a 2-cylinder compound steam engine of 1200 IHP, driving a new "washless" propeller. [10] [11]

The ship was sold in 1926 to the Liverpool & Glasgow Salvage Association, which renamed her Restorer in 1927. [12] [13]

Restorer was broken up in the second quarter of 1937. [14]

Notes

  1. ↑ The rest of the class had 38cwt versions
  2. ↑ Two 2-gun 94-ton schooners were also built by German of Malta in the 1850s

Related Research Articles

The following ships of the Royal Navy were assigned the name Calypso, after Calypso, a sea nymph in Greek mythology:

HMS <i>Gannet</i> (1878) Sloop of the Royal Navy

HMSGannet is a Royal Navy Doterel-class screw sloop-of-war launched on 31 August 1878. It became a training ship in the Thames in 1903, and was then loaned as a training ship for boys in the Hamble from 1913. It was restored in 1987 and is now part of the UK's National Historic Fleet.

HMS <i>Algerine</i> (1895) Sloop of the Royal Navy

HMS Algerine was a Phoenix-class steel screw sloop of the Royal Navy. She was launched at Devonport in 1895, saw action in China during the Boxer Rebellion, and later served on the Pacific Station. She was stripped of her crew at Esquimalt in 1914, and transferred to the Royal Canadian Navy in 1917, being commissioned as HMCS Algerine. She was sold as a salvage vessel in 1919 and wrecked in 1923.

Three ships of the Royal Navy have been named HMS Melita, named after the island of Malta:

Twenty-two ships of the Royal Navy have borne the name HMS Falcon. They are named after an exceptionally fast bird of prey.

HMS <i>Reindeer</i> (1883) Royal Navy Mariner-class composite screw gunvessel of 8 guns

HMS Reindeer was a Royal Navy Mariner-class composite screw gunvessel of 8 guns.

<i>Mariner</i>-class gunvessel

The Mariner class was a class of six 8-gun gunvessels built for the Royal Navy between 1883 and 1888. Four were built in the Naval Dockard at Devonport, and two elsewhere; the Acorn was built by contract at Jacobs Pill on the Pembroke River, while the Melita was built in the Malta Dockyard, the only substantial ship of the Royal Navy ever to be built in the island.

HMS <i>Mariner</i> (1884) Royal Navy Mariner-class composite screw gunvessel of 8 guns

HMS Mariner was the name-ship of the Royal Navy Mariner-class composite screw gunvessel of 8 guns.

HMS <i>Racer</i> (1884) Sloop of the Royal Navy

HMS Racer was a Royal Navy Mariner-class composite screw gunvessel of 8 guns.

HMS <i>Icarus</i> (1885) Sloop of the Royal Navy

HMS Icarus was a Mariner-class composite screw gunvessel of 8 guns, and the third Royal Navy vessel to carry the name. She was launched in 1885 at Devonport and sold in 1904.

Seven ships of the Royal Navy have borne the name HMS Ringdove, another name for the common wood pigeon:

HMS Swift has been the name of numerous ships of the Royal Navy:

HMS <i>Phoenix</i> (1832) Sloop of the Royal Navy

HMS Phoenix was a 6-gun steam paddle vessel of the Royal Navy, built in a dry dock at Chatham in 1832. She was reclassified as a second-class paddle sloop before being rebuilt as a 10-gun screw sloop in 1844–45. She was fitted as an Arctic storeship in 1851 and sold for breaking in 1864.

HMS <i>Rambler</i> (1880) Gunvessel of the Royal Navy

HMS Rambler was an Algerine-class gunvessel of the Royal Navy, built by John Elder & Co., Glasgow and launched on 26 January 1880. She was commissioned as a survey vessel in 1884 and served in Chinese waters during the 1880s and 1890s. She provided men to a naval brigade during the Boer War and was sold on 23 January 1907. The work of this vessel is now remembered in Hong Kong by the Rambler Channel near Tsing Yi.

<i>Algerine</i>-class gunvessel

The Algerine-class gunvessel was a class of three Royal Navy composite gunvessels built in 1880. Two of them were sold after only ten years of service, but the other was converted to a survey ship before commissioning and survived in this role until 1907.

HMS <i>Ringdove</i> (1889) Gunboat of the Royal Navy

HMS Ringdove was a Redbreast-class gunboat of the Royal Navy, built at Devonport Dockyard and launched on 30 April 1889.

HMS <i>Stork</i> (1756) Sloop of the Royal Navy

HMS Stork was a 10-gun Alderney-class sloop of the Royal Navy which saw active service during the Seven Years' War. Launched in 1757, she was assigned to the Navy's Jamaica Station until August 1758 when she was captured by the French. She remained in French hands until being disarmed in 1759 and removed from service in 1760.

HMS <i>Diligence</i> (1756) Sloop of the Royal Navy

HMS Diligence was a 10-gun Alderney-class sloop of the Royal Navy which saw active service during the Seven Years' War and the American Revolutionary War. Launched in 1756, she was a successful privateer hunter off the coast of France before being reassigned to North American waters in 1763. Fifteen years later she was briefly refitted as a receiving ship for press ganged sailors brought into Sheerness Dockyard, before being re-registered in August 1779 as the fireship Comet.

HMS <i>Desperate</i> (1849) Sloop of the Royal Navy

HMS Desperate was originally slated to be built to the Sampson designed steam vessel rated as a Steam Vessel First Class (SV1); however, the Admiralty, first rerated the vessels as First Class Sloops on 19 April 1845 then on the 9 May 1845, she was ordered as First-Class screw sloops to be built from a design of Sir William Symonds, Surveyor of the Navy. She would be a 10-gun vessel with 400 NHP engines. She served in the Baltic during the Crimean war, and as a store ship to Edward Augustus Inglefield's Arctic expedition. She was broken up by 1865.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Winfield, R.; Lyon, D. (2004). The Sail and Steam Navy List: All the Ships of the Royal Navy 1815–1889. London: Chatham Publishing. ISBN   978-1-86176-032-6. OCLC   52620555.
  2. 1 2 3 4 5 6 Melita Historica New Series. 12(1998)3(323-330)
  3. 1 2 3 Mercantile Navy List. London: Spottiswood, Ballantyne. 1 January 1923. p. 446. Retrieved 16 November 2019.
  4. ↑ Army and Navy Gazette, 24 March 1888
  5. ↑ "HMS Melita at the Naval Database website". Archived from the original on 5 May 2006. Retrieved 11 September 2008.
  6. ↑ Joslin, Litherland and Simpkin. British Battles and Medals. p. 181. Published Spink, London. 1988.
  7. ↑ "Naval & Military intelligence". The Times. No. 36617. London. 20 November 1901. p. 10.
  8. ↑ "Naval & Military intelligence". The Times. No. 36643. London. 20 December 1901. p. 5.
  9. ↑ Hansard, Commons Sitting, 13 March 1905 vol 142 cc1199-200
  10. ↑ "Washless Propeller: Feature of Falmouth Salvage Ship" . Western Morning News. No. 19755. Plymouth. 9 July 1923. p. 3. Retrieved 16 November 2019– via The British Newspaper Archive.
  11. ↑ "Cornish Salvage Steamer" . Western Morning News. No. 19757. Plymouth. 11 July 1923. p. 3. Retrieved 16 November 2019– via The British Newspaper Archive.
  12. ↑ "The Salvage Association". Shipbuilding and Shipping Record. Volume 53, Part 1. 1939. Retrieved 16 November 2019.
  13. ↑ "Notices" . Western Morning News. No. 20968. Plymouth. 7 June 1927. p. 1. Retrieved 16 November 2019– via British Newspaper Archive.
  14. ↑ "1137212" . Miramar Ship Index . Retrieved 7 July 2009.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.