Cherokee II | |
---|---|
Role | Glider |
National origin | United States |
Designer | Stan Hall |
First flight | 1956 |
Introduction | 1956 |
Status | Plans no longer available |
Number built | about 106 |
Variants | Leonard Annebula |
The Hall Cherokee II is an American high-wing, single seat glider that was designed by Stan Hall and introduced in 1956 as plans for amateur construction. [1] [2]
Due to its low cost and ease of construction, the Cherokee II is one of the most produced home-built gliders. [2]
The Cherokee was designed by Hall to provide homebuilders with an easy-to-construct and inexpensive aircraft that would give performance at least equal to the Schweizer SGS 1-26, which had flown two years earlier. [1] [2]
The Cherokee structure is built from wood and covered in doped aircraft fabric covering. The fuselage features truss construction, with longerons and gussets and a fixed monowheel landing gear. The wing has two spars, with geodetic braces handling the torsion loads and is built with a fixed center section and removable outer wing panels. The wings have spoilers on the top surfaces and use a Gö 549 airfoil. [1] [2]
As with all plans-built aircraft, builders have made modifications to the design. Some examples have been built with leading edges made from aluminium, cardboard, glass reinforced plastic and plywood and with many different styles of canopy. [1] [2]
The first Cherokee II to fly was built by Frank Kerns and George McGinnis in 1956. The first flight was done by the designer, Stan Hall, in the late summer of 1956. [3]
Cherokee IIs have been used to earn many Gold badges as well as some Diamond badge legs. [2] The first 300 km flight of a Cherokee II, for Gold Distance and Diamond Goal, was done by Ray Proenneke in April 1960. [4] To date, the longest distance flown in a Cherokee II is 260 miles (420 km), flown by Jim Hard in June 1965. [5] In July 2012, Tony Condon flew his Cherokee II on a 300 km FAI Triangle closed course flight. [6]
Cherokee IIs have occasionally been flown in competition, usually in regional handicapped contests. The prototype Cherokee II was entered in the 1956 US National Championships at Grand Prairie, Texas, but was not allowed to compete as it had not flown the FAA-required 50 hours of flight test time within 25 miles (40 km) of its home airport. [3] In 1959, two Cherokee IIs competed at the Canadian national contest, with Ross Grady placing second and a team of Jim Reid and Ken Lewandowski coming in third. [7] In Class II of the 1960 US West Coast Championship, George Asdel and Stan Hall took first and second, respectively, in their Cherokee IIs. [8] Ray Proenneke flew in many US west coast meets and contests in the early 1960s and won the Torrey Pines meet in 1964. [9] Bud Brown flew several regional contests in the US midwest in the late 1960s, placing 7th, winning the handicap trophy, in the Wright Memorial Meet of 1967. [10] In the 1968 Region 6 Contest Bud flew to 11th overall, but once again won the handicap trophy. [11] In 1967, Peter Newgard flew his Cherokee to first place in the 25:1 glide ratio and under category at the US Region 11 contest. [10] Carl Herold won the 1976 US Region 11 Sports Class contest in a borrowed Cherokee II. [12] In the 1978 US Region 4 Sports Class contest, Ted Garnett came in first in his Cherokee II. [13] Dean Gradwell placed 5th in the US Region 11 Sports Class in 1983, winning one day's competition. [14] Tony Condon placed 3rd in the 2011 US Region 10 Soaring Championships flying his Cherokee II, winning two days. [15] In 2012, Condon flew his Cherokee to a 7th-place finish in the US 13.5 Meter Super Regionals. [16]
In March 2011 there were at least two Cherokee IIs in airworthy condition, one in the USA [17] and another in Australia. [18] The original Cherokee RM, built by Ree and Miller, had recently been flown after an extensive restoration. [19] At least three Cherokee IIs were currently undergoing restoration, two in the US and one in Australia. [20]
Data from Sailplane Directory and Soaring [1] [2]
General characteristics
Performance
The Schweizer SGS 1-26 is a United States One-Design, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-23 is a United States Open and Standard Class, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-24, also referred to as the Schweizer-Burr SGS 1-24, is a United States single-seat, mid-wing, Open Class competition glider built by Howard Burr and Schweizer Aircraft of Elmira, New York.
The Schweizer SGS 1-29 is an American single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.
The Neukom Elfe is family of Swiss single-seat high-performance sailplane designs.
The Nelson Hummingbird PG-185B is an American, tandem two seat, mid-wing motor glider that was developed by Nelson Aircraft after discontinuing the Nelson Dragonfly.
The Leonard Annebula is an American high-wing, single-seat FAI Standard Class glider designed by Bob Leonard of Wichita, Kansas, based on the Hall Cherokee II.
The Franklin PS-2 is an American, high-wing, strut-braced, single seat, glider that was designed by R. E. Franklin and produced by the Franklin Glider Corporation starting in 1930.
The Laister LP-46 and LP-49 are a family of American high-wing, single-seat, gliders that were designed by Jack Laister and produced by Laister Sailplanes both as kit aircraft and as certified complete aircraft.
The Miller Tern is an American single-seat, high wing glider that was designed by William Terrance Miller and offered as plans for amateur construction.
The Mitchell Nimbus is a series of American, single-seat, high-wing gliders that was designed by Don Mitchell in the 1950s. Mitchell is also well known for his ultralight Mitchell Wing A-10 and U-2 designs.
The Schreder Airmate HP-11 is an American mid-wing, V-tailed, single seat glider designed by Richard Schreder. Airmate was the name of Schreder's design company.
The Slingsby T.59 Kestrel is a British Open class glider which first flew in August 1970. Of fibreglass construction, it features camber-changing flaps, airbrakes, and a retractable main wheel.
The Johnson RHJ-6 Adastra was an American mid-wing, two-seat glider that was designed and constructed by Dick Johnson and first flown on 3 April 1960.
The Lamson L-106 Alcor is an American, high-wing, experimental, pressurized research glider that was designed and built by Bob Lamson. The Alcor was the first pressurized sailplane ever built.
The Oldershaw O-2, officially registered as the Oldershaw Jana-Linn O-2, is an American high-wing, single seat, V-tailed glider that was designed and built by Vernon Oldershaw.
The Oldershaw O-3 is an American high-wing, single seat, V-tailed glider that was designed by Vernon Oldershaw. Two examples were constructed as gliders and then both were later converted to motor gliders.
The Crown City Glider Club Screaming Wiener is an American mid-wing, single-seat glider that was designed and built by members of the Crown City Glider Club in 1938.
The Warsztaty Szybowcowe Orlik, also known as the Kocjan Orlik after the designer, is a family of Polish gull winged gliders that was designed by Antoni Kocjan and produced by Warsztaty Szybowcowe.
The Schleicher Condor, also referred to as the Dittmar Condor, is a series of German high-wing, single and two-seat, gull winged, gliders that were designed by Heini Dittmar in the 1930s, produced in small quantities before the Second World War, produced again between 1952 and 1955 by Alexander Schleicher GmbH & Co and also by Ferdinand Schmetz.
Wikimedia Commons has media related to Hall Cherokee II . |