ICAD (software)

Last updated

ICAD (Corporate history: ICAD, Inc., Concentra (name change at IPO in 1995), KTI (name change in 1998), Dassault Systemes (purchase in 2001) ( [1] ) is a knowledge-based engineering (KBE) system that enables users to encode design knowledge using a semantic representation that can be evaluated for Parasolid output. ICAD has an open architecture that can utilize all the power and flexibility of the underlying language.

Contents

KBE, as implemented via ICAD, received a lot of attention due to the remarkable results that appeared to take little effort.[ citation needed ] ICAD allowed one example of end-user computing that in a sense is unparalleled. Most ICAD developers were degreed engineers. Systems developed by ICAD users were non-trivial and consisted of highly complicated code. In the sense of end-user computing, ICAD was the first to allow the power of a domain tool to be in the hands of the user, at the same time being open to allow extensions as identified and defined by the domain expert or subject-matter expert (SME).[ citation needed ]

A COE article [2] looked at the resulting explosion of expectations (see AI winter), which were not sustainable. However, such a bubble burst does not diminish the existence of ability that would exist were expectations and use reasonable or properly managed.[ citation needed ]

History

The original implementation of ICAD was on a Lisp machine (Symbolics). Some of the principals involved with the development were Larry Rosenfeld, [3] Avrum Belzer, Patrick M. O'Keefe, Philip Greenspun, and David F. Place. The time frame was 1984–85. [4] [5]

ICAD started on special-purpose Symbolics Lisp hardware and was then ported to Unix when Common Lisp became portable to general-purpose workstations.

The original domain for ICAD was mechanical design with many application successes. However, ICAD has found use in other domains, such as electrical design, shape modeling, etc. An example project could be wind tunnel design or the development of a support tool for aircraft multidisciplinary design. [6] [7] [8] Further examples can be found in the presentations at the annual IIUG (International ICAD Users Group) that have been published in the KTI Vault [ dead link ] (1999 through 2002). [9] Boeing and Airbus used ICAD extensively to develop various components in the 1990s and early 21st century.

As of 2003, ICAD was featured strongly in several areas as evidenced by the Vision & Strategy Product Vision and Strategy [ dead link ] presentation. After 2003, ICAD use diminished. At the end of 2001, the KTI Company faced financial difficulties and laid off most of its best staff. They were eventually bought out by Dassault who effectively scuppered the ICAD product. See IIUG at COE, 2003 (first meeting due to Dassault by KTI)

The ICAD system was very expensive, relatively, and was in the price range of high-end systems. Market dynamics couldn't support this as there may not have been sufficient differentiating factors between ICAD and the lower-end systems (or the promises from Dassault). KTI was absorbed by Dassault Systemes and ICAD is no longer considered the go-forward tool for knowledge-based engineering (KBE) applications by that company. Dassault Systemes is promoting a suite of tools oriented around version 5 of their popular CATIA CAD application, with Knowledgeware the replacement for ICAD.

As of 2005, things were still a bit unclear. ICAD 8.3 was delivered. The recent COE Aerospace Conference had a discussion about the futures of KBE. One issue involves the stacking of 'meta' issues within a computer model. How this is resolved, whether by more icons or the availability of an external language, remains to be seen.

The Genworks GDL product (including kernel technology from the Gendl Project) is the nearest functional equivalent to ICAD currently available.

Particulars

ICAD provided a declarative language (IDL) using New Flavors (never converted to Common Lisp Object System (CLOS)) that supported a mechanism for relating parts (defpart) via a hierarchical set of relationships. Technically, the ICAD Defpart was a Lisp macro; the ICAD defpart list was a set of generic classes that can be instantiated with specific properties depending upon what was represented. This defpart list was extendible via composited parts that represented domain entities. Along with the part-subpart relations, ICAD supported generic relations via the object modeling abilities of Lisp.

Example applications of ICAD range from a small collection of defparts that represents a part or component to a larger collection that represents an assembly. In terms of power, an ICAD system, when fully specified, can generate thousands of instances of parts on a major assembly design.

One example of an application driving thousands of instances of parts is that of an aircraft wing – where fastener type and placement may number in the thousands, each instance requiring evaluation of several factors driving the design parameters.

Futures (KBE, etc.)

One role for ICAD may be serving as the defining prototype for KBE which would require that we know more about what occurred the past 15 years (much information is tied up behind corporate firewalls and under proprietary walls). With the rise of functional programming languages (an example is Haskell) in the markets, perhaps some of the power attributable to Lisp may be replicated.

See also

Related Research Articles

<span class="mw-page-title-main">Lisp machine</span> Computer specialized in running Lisp

Lisp machines are general-purpose computers designed to efficiently run Lisp as their main software and programming language, usually via hardware support. They are an example of a high-level language computer architecture, and in a sense, they were the first commercial single-user workstations. Despite being modest in number Lisp machines commercially pioneered many now-commonplace technologies, including effective garbage collection, laser printing, windowing systems, computer mice, high-resolution bit-mapped raster graphics, computer graphic rendering, and networking innovations such as Chaosnet. Several firms built and sold Lisp machines in the 1980s: Symbolics, Lisp Machines Incorporated, Texas Instruments, and Xerox. The operating systems were written in Lisp Machine Lisp, Interlisp (Xerox), and later partly in Common Lisp.

<span class="mw-page-title-main">Computer-aided design</span> Constructing a product by means of computer

Computer-Aided Design (CAD) is the use of computers to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve communications through documentation, and to create a database for manufacturing. Designs made through CAD software help protect products and inventions when used in patent applications. CAD output is often in the form of electronic files for print, machining, or other manufacturing operations. The terms computer-aided drafting (CAD) and computer-aided design and drafting (CADD) are also used.

<span class="mw-page-title-main">CATIA</span> CAD/CAM/CAE commercial software suite

CATIA is a multi-platform software suite for computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), 3D modeling and product lifecycle management (PLM), developed by the French company Dassault Systèmes.

<span class="mw-page-title-main">Genera (operating system)</span> Symbolics operating system based on Lisp

Genera is a commercial operating system and integrated development environment for Lisp machines created by Symbolics. It is essentially a fork of an earlier operating system originating on the Massachusetts Institute of Technology (MIT) AI Lab's Lisp machines which Symbolics had used in common with Lisp Machines, Inc. (LMI), and Texas Instruments (TI). Genera was also sold by Symbolics as Open Genera, which runs Genera on computers based on a Digital Equipment Corporation (DEC) Alpha processor using Tru64 UNIX. In 2021 a new version was released as Portable Genera which runs on DEC Alpha, Tru64 UNIX, x86-64 and Arm64 Linux, x86-64 and Apple Silicon M Series macOS. It is released and licensed as proprietary software.

Information architecture (IA) is the structural design of shared information environments; the art and science of organizing and labelling websites, intranets, online communities and software to support usability and findability; and an emerging community of practice focused on bringing principles of design, architecture and information science to the digital landscape. Typically, it involves a model or concept of information that is used and applied to activities which require explicit details of complex information systems. These activities include library systems and database development.

<span class="mw-page-title-main">Philip Greenspun</span> American computer scientist and entrepreneur

Philip Greenspun is an American computer scientist, educator, early Internet entrepreneur, and pilot who was a pioneer in developing online communities like photo.net.

<span class="mw-page-title-main">Requirements analysis</span> Engineering process

In systems engineering and software engineering, requirements analysis focuses on the tasks that determine the needs or conditions to meet the new or altered product or project, taking account of the possibly conflicting requirements of the various stakeholders, analyzing, documenting, validating and managing software or system requirements.

<span class="mw-page-title-main">Product lifecycle</span> Duration of processing of products from inception, to engineering, design & manufacture

In industry, product lifecycle management (PLM) is the process of managing the entire lifecycle of a product from its inception through the engineering, design and manufacture, as well as the service and disposal of manufactured products. PLM integrates people, data, processes, and business systems and provides a product information backbone for companies and their extended enterprises.

<span class="mw-page-title-main">Computer-aided software engineering</span> Software Quality Engineering Practices

Computer-aided software engineering (CASE) was a domain of software tools used to design and implement applications. CASE tools were similar to and were partly inspired by Computer-Aided Design (CAD) tools used for designing hardware products. CASE tools were intended to help develop high-quality, defect-free, and maintainable software. CASE software was often associated with methods for the development of information systems together with automated tools that could be used in the software development process.

<span class="mw-page-title-main">SolidWorks</span> Commonly used software for 3D modeling

SolidWorks is a brand within Dassault Systèmes that develops and markets solid modeling computer-aided design, computer-aided engineering, 3D CAD design and collaboration, analysis, and product data management software.

Kansei engineering aims at the development or improvement of products and services by translating the customer's psychological feelings and needs into the domain of product design. It was founded by Mitsuo Nagamachi, Professor Emeritus of Hiroshima University. Kansei engineering parametrically links the customer's emotional responses to the properties and characteristics of a product or service. In consequence, products can be designed to bring forward the intended feeling.

A software factory is a structured collection of related software assets that aids in producing computer software applications or software components according to specific, externally defined end-user requirements through an assembly process. A software factory applies manufacturing techniques and principles to software development to mimic the benefits of traditional manufacturing. Software factories are generally involved with outsourced software creation.

Knowledge-based engineering (KBE) is the application of knowledge-based systems technology to the domain of manufacturing design and production. The design process is inherently a knowledge-intensive activity, so a great deal of the emphasis for KBE is on the use of knowledge-based technology to support computer-aided design (CAD) however knowledge-based techniques can be applied to the entire product lifecycle.

Dassault Systèmes Simulia Corp. is a computer-aided engineering (CAE) vendor. Formerly known as Abaqus Inc. and previously Hibbitt, Karlsson & Sorensen, Inc., (HKS), the company was founded in 1978 by David Hibbitt, Bengt Karlsson and Paul Sorensen, and has its headquarters in Providence, Rhode Island.

<span class="mw-page-title-main">Orphaned technology</span> Technology abandoned by the original developers

Orphaned technology refers to computer technologies that have been abandoned by their original developers. As opposed to deprecation, which tends to be a gradual shift away from an older technology to newer technology, orphaned technology is usually abandoned immediately or with no direct replacement. Unlike abandonware, orphaned technology refers to both software and hardware and the practises around them.

Domain-driven design (DDD) is a major software design approach, focusing on modeling software to match a domain according to input from that domain's experts.

3DVIA is a brand of Dassault Systèmes that is focused on the development of 3D authoring, publishing, and hosting tools for professional and consumer markets. The company's products are targeted at manufacturing, design, and marketing professionals.

<span class="mw-page-title-main">Abaqus</span> Software for finite element analysis

Abaqus FEA is a software suite for finite element analysis and computer-aided engineering, originally released in 1978. The name and logo of this software are based on the abacus calculation tool. The Abaqus product suite consists of five core software products:

  1. Abaqus/CAE, or "Complete Abaqus Environment". It is a software application used for both the modeling and analysis of mechanical components and assemblies (pre-processing) and visualizing the finite element analysis result. A subset of Abaqus/CAE including only the post-processing module can be launched independently in the Abaqus/Viewer product.
  2. Abaqus/Standard, a general-purpose Finite-Element analyzer that employs implicit integration scheme (traditional).
  3. Abaqus/Explicit, a special-purpose Finite-Element analyzer that employs explicit integration scheme to solve highly nonlinear systems with many complex contacts under transient loads.
  4. Abaqus/CFD, a Computational Fluid Dynamics software application which provides advanced computational fluid dynamics capabilities with extensive support for preprocessing and postprocessing provided in Abaqus/CAE - discontinued in Abaqus 2017 and further releases.
  5. Abaqus/Electromagnetic, a Computational electromagnetics software application which solves advanced computational electromagnetic problems.

A metaCASE tool is a type of application software that provides the possibility to create one or more modeling methods, languages or notations for use within the process of software development. Often the result is a modeling tool for that language. MetaCASE tools are thus a kind of language workbench, generally considered as being focused on graphical modeling languages.

Knowledge-based configuration, also referred to as product configuration or product customization, is an activity of customising a product to meet the needs of a particular customer. The product in question may consist of mechanical parts, services, and software. Knowledge-based configuration is a major application area for artificial intelligence (AI), and it is based on modelling of the configurations in a manner that allows the utilisation of AI techniques for searching for a valid configuration to meet the needs of a particular customer.

References

  1. ↑ The ICAD System Archived November 22, 2004, at the Wayback Machine
  2. ↑ Switlik, John (October–November 2005). "Knowledge Based Engineering (KBE): Update". coe.org. COE. Archived from the original on 24 March 2012. Retrieved 6 July 2014.{{cite web}}: CS1 maint: unfit URL (link)
  3. ↑ "Welcome to Glengary LLC – Partner Directory | Larry Rosenfeld, ICAD Founder". glengaryllc.com. Archived from the original on 13 September 2017. Retrieved 11 April 2017.
  4. ↑ Philip Greenspun's resume
  5. ↑ Philip Greenspun's List of Engineering Projects
  6. ↑ Bermell-Garcia, P. et al () A KBE System for the design of wind tunnel models using reusable knowledge components Archived 2013-06-22 at the Wayback Machine
  7. ↑ "A modular reconfigurable software tool to support distributed multidisciplinary design and optimization of complex products" (PDF). lr.tudelft.nl. Retrieved 11 April 2017.[ permanent dead link ]
  8. ↑ Stanley Knutson Archived 2006-06-15 at the Wayback Machine , ICAD Chief Scientist
  9. ↑ "The last ICAD application to receive the KBE Innovation Award at the 2002 IIUG conference in Boston" (PDF). lr.tudelft.nl. Retrieved 11 April 2017.[ permanent dead link ]
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.