International System of Electrical and Magnetic Units

Last updated

The International System of Electrical and Magnetic Units is an obsolete system of units used for measuring electrical and magnetic quantities. It was proposed as a system of practical international units by unanimous recommendation at the International Electrical Congress (Chicago, 1893), discussed at other Congresses, and finally adopted at the International Conference on Electric Units and Standards in London in 1908. [1] It was rendered obsolete by the inclusion of electromagnetic units in the International System of Units (SI) at the 9th General Conference on Weights and Measures in 1948.

Contents

Earlier systems

The link between electromagnetic units and the more familiar units of length, mass and time was first demonstrated by Carl Friedrich Gauss in 1832 with his measurement of the Earth's magnetic field, [2] and the principle was extended to electrical measurements by Franz Ernst Neumann in 1845. [3] [4] A complete system of metric electrical and magnetic units was proposed by Wilhelm Eduard Weber in 1851, [5] based on the idea that electrical units could be defined solely in relation to absolute units of length, mass, and time. [6] [7] Weber's original proposal was based on a millimetre–milligram–second system of units.

The development of the electric telegraph (an invention of Gauss and Weber) demonstrated the need for accurate electrical measurements. At the behest of William Thomson, [8] the British Association for the Advancement of Science (B.A.) set up a committee in 1861, initially to examine standards for electrical resistance, [9] which was expanded in 1862 to include other electrical standards. [10] After two years of discussion, experiment and considerable differences of opinion, [8] the committee decided to adapt Weber's approach to the CGS system of units, [11] but used metre, gramme and second as their absolute units. However these units were both difficult to realize and (often) impractically small. [12] To overcome these handicaps, the B.A. also proposed a set of "practical" or "reproduceable" units, which were not directly linked to the CGS system but which were, as near as experimental accuracy allowed, equal to multiples of the corresponding CGS units. [13] The B.A. had developed two sets of CGS units. The practical units were based on the electromagnetic set of units rather than the electrostatic set. [13]

1893 system

The B.A. system of practical units gained considerable international support, and was adopted – with one important modification – by the First International Conference of Electricians (Paris, 1881). The British Association had constructed an artefact representation of the ohm (a standard length of resistance wire which had a resistance of 109 CGS units of electric resistance, that is one ohm) whereas the international conference preferred a method of realization that could be repeated in different laboratories in different countries. The chosen method was based on the resistivity of mercury, by measuring the resistance of a column of mercury of specified dimensions (106 cm × 1 mm2): however, the chosen length of column was almost 3 millimetres too short, leading to a difference of 0.28% between the new practical units and the CGS units which were supposedly their basis. [14]

The anomaly was resolved at another international conference, in Chicago in 1893, by a correction in the definition of the ohm. The units agreed at this conference were termed "international" units, to distinguish them from their predecessors.

The 1893 system had three base units: the international ampere, the international ohm and the international volt.

Unit1893 ("international") definition [Note 1] CGS ("absolute") equivalentNotes
ampere The unvarying current which, when passed through a solution of silver nitrate in water, deposits silver at the rate of 0.001 118 00 grams per secondThe current produced in a conductor with a 1 ohm resistance when there is a potential difference of 1 volt between its ends0.1 CGS-EMU units of electric current
ohm The resistance offered to an unvarying electric current by a column of mercury at the temperature of melting ice 14.4521 grams in mass, of a constant cross-sectional area and of the length of 106.3 centimetres109 CGS-EMU units of electric resistance
volt 1000⁄1434 of the electromotive force of a Clark cell at a temperature of 15 °CThe electromotive force produced in an electric circuit which cuts 108 magnetic lines of force per second108 CGS-EMU units of electromotive force

The international units did not have the same formal legal status as the metre and the kilogram through the Metre Convention (1875), although several countries adopted the definition within their national laws (e.g., the United States, through Public Law 105 of July 12, 1894 [15] ).

Overdefinition and the 1908 modification

The 1893 system of units was overdefined, as can be seen from an examination of Ohm's law:

V = I R.

By Ohm's law, knowing any two of the physical quantities V, I or R (potential difference, current or resistance) will define the third, and yet the 1893 system defines the units for all three quantities. With improvements in measurement techniques, it was soon recognised that

1 Vint ≠ 1 Aint × 1 Ωint.

The solution came at an international conference in London in 1908. The essential point was to reduce the number of base units from three to two by redefining the international volt as a derived unit. There were several other modifications of less practical importance: [1]

International coulomb
the electric charge transferred by a current of one international ampere in one second; [Note 2]
International farad
the capacitance of a capacitor charged to a potential of one international volt by one international coulomb of electricity; [Note 2]
Joule
107 units of work in the CGS system, represented sufficiently well for practical use by the energy expended in one second by an international ampere in an international ohm;
Watt
107 units of power in the CGS system, represented sufficiently well for practical use by the work done at the rate of one joule per second;
Henry
the inductance in a circuit when an electromotive force induced in this circuit is one international volt, while the inducing current varies at the rate of one ampere per second.

SI units

With advances in the theory of electromagnetism and in quantity calculus, it became apparent that, in addition to the base units of time, length and mass, a coherent system of units could include only one electromagnetic base unit. The first such system was proposed by Giorgi in 1901: [16] [17] [18] it used the ohm as the additional base unit in the MKS system, and so is often referred to as the MKSΩ system or the Giorgi system.

An additional problem with the CGS system of electrical units, pointed out as early as 1882 by Oliver Heaviside, [19] was that they were not "rationalized", that is they failed to properly take account of permittivity and permeability as properties of a medium. Giorgi was also a great proponent of rationalization of the electrical units. [17]

The choice of electrical unit for the base unit in a rationalized system depends only on practical considerations, particularly the ability to realize the unit accurately and reproducibly. The ampere rapidly gained support over the ohm, as many national standards laboratories were already realizing the ampere in absolute terms using ampere balances. [16] [20] The International Electrotechnical Commission (IEC) adopted the Giorgi system with the ampere replacing the ohm in 1935, and this choice of base units is often called the MKSA system. [17]

The International Committee for Weights and Measures (CIPM) approved a new set of definitions for electrical units, based on the rationalized MKSA system, in 1946, and these were internationally adopted under the Metre Convention by the 9th  General Conference on Weights and Measures in 1948. [21] Under this system, which would become the International System of Units (SI), the ohm is a derived unit. [Note 3]

The SI definitions of the electrical units are formally equivalent to the 1908 international definitions, and so there should not have been any change in the size of the units. Nevertheless, the international ohm and the international volt were not usually realized in absolute terms but by reference to a standard resistance and a standard electromotive force respectively. The realizations recommended in 1908 are not exactly equivalent to the absolute definitions: recommended conversion factors [22] are

1 Ωint ≈ 1.000 49 Ω
1 Vint ≈ 1.000 34 V

although slightly different factors may apply for individual standards in national measurement laboratories. [Note 4] As the international ampere was usually realized by means of an ampere balance rather than electrolytically, [16] 1 Aint = 1 A. The conversion factor for the "electrolytic" ampere (Aelec) can be calculated from modern values of the atomic weight of silver and the Faraday constant:

1 Aelec = 1.000 022(2) A

See also

Notes and references

Notes

  1. 1 2 The terminology of some of the definitions has been updated to modern usage.
  2. 1 2 The coulomb and the farad had been used in earlier B.A. systems of electrical units with slightly different definitions, hence the need to add the qualifier "international".
  3. ↑ The ohm is the electric resistance between two points of a conductor when a constant potential difference of 1 volt, applied to these points, produces in the conductor a current of 1 ampere, the conductor not being the seat of any electromotive force.
  4. ↑ Conversion factors for the U.S. national standards (NIST) are 1 Ωint = 1.000 495 Ω and 1 Vint = 1.000 330 V.

Related Research Articles

<span class="mw-page-title-main">Ampere</span> SI base unit of electric current

The ampere (, ; symbol: A), often shortened to amp, is the unit of electric current in the International System of Units (SI). One ampere is equal to 1 coulomb, or 6.241509074×1018 electrons' worth of charge, moving past a point in a second. It is named after French mathematician and physicist André-Marie Ampère (1775–1836), considered the father of electromagnetism along with Danish physicist Hans Christian Ørsted.

<span class="mw-page-title-main">Electric current</span> Flow of electric charge

An electric current is a flow of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is defined as the net rate of flow of electric charge through a surface. The moving particles are called charge carriers, which may be one of several types of particles, depending on the conductor. In electric circuits the charge carriers are often electrons moving through a wire. In semiconductors they can be electrons or holes. In an electrolyte the charge carriers are ions, while in plasma, an ionized gas, they are ions and electrons.

The centimetre–gram–second system of units is a variant of the metric system based on the centimetre as the unit of length, the gram as the unit of mass, and the second as the unit of time. All CGS mechanical units are unambiguously derived from these three base units, but there are several different ways in which the CGS system was extended to cover electromagnetism.

The joule is the unit of energy in the International System of Units (SI). It is equal to the amount of work done when a force of 1 newton displaces a mass through a distance of 1 metre in the direction of the force applied. It is also the energy dissipated as heat when an electric current of one ampere passes through a resistance of one ohm for one second. It is named after the English physicist James Prescott Joule (1818–1889).

<span class="mw-page-title-main">Kilogram</span> Metric unit of mass

The kilogram is the base unit of mass in the International System of Units (SI), having the unit symbol kg. It is a widely used measure in science, engineering and commerce worldwide, and is often simply called a kilo colloquially. It means 'one thousand grams'.

The International System of Units, internationally known by the abbreviation SI, is the modern form of the metric system and the world's most widely used system of measurement. Established and maintained by the General Conference on Weights and Measures (CGPM), it is the only system of measurement with an official status in nearly every country in the world, employed in science, technology, industry, and everyday commerce.

<span class="mw-page-title-main">Volt</span> SI derived unit of voltage

The volt is the unit of electric potential, electric potential difference (voltage), and electromotive force in the International System of Units (SI). It is named after the Italian physicist Alessandro Volta (1745–1827).

<span class="mw-page-title-main">Metric system</span> Metre-based systems of measurement

The metric system is a system of measurement that succeeded the decimalised system based on the metre that had been introduced in France in the 1790s. The historical development of these systems culminated in the definition of the International System of Units (SI) in the mid-20th century, under the oversight of an international standards body. Adopting the metric system is known as metrication.

<span class="mw-page-title-main">Coulomb</span> SI derived unit of electric charge

The coulomb (symbol: C) is the unit of electric charge in the International System of Units (SI). In the present version of the SI it is equal to the electric charge delivered by a 1 ampere constant current in 1 second and to 5×1027/801088317 elementary charges, e, (about 6.241509×1018e).

<span class="mw-page-title-main">Magnetomotive force</span>

In physics, the magnetomotive force (mmf) is a quantity appearing in the equation for the magnetic flux in a magnetic circuit, Hopkinson's law. It is the property of certain substances or phenomena that give rise to magnetic fields:

In physics, the weber is the unit of magnetic flux in the International System of Units (SI), whose units are volt-second. A magnetic flux density of one Wb/m2 is one tesla.

A magnetic circuit is made up of one or more closed loop paths containing a magnetic flux. The flux is usually generated by permanent magnets or electromagnets and confined to the path by magnetic cores consisting of ferromagnetic materials like iron, although there may be air gaps or other materials in the path. Magnetic circuits are employed to efficiently channel magnetic fields in many devices such as electric motors, generators, transformers, relays, lifting electromagnets, SQUIDs, galvanometers, and magnetic recording heads.

The abampere (abA), also called the biot (Bi) after Jean-Baptiste Biot, is the derived electromagnetic unit of electric current in the emu-cgs system of units. One abampere corresponds to ten amperes in the SI system of units. An abampere of current in a circular path of one centimeter radius produces a magnetic field of 2π oersteds at the center of the circle.

<span class="mw-page-title-main">Ohm</span> SI derived unit of electrical resistance

The ohm is the unit of electrical resistance in the International System of Units (SI). It is named after German physicist Georg Simon Ohm. Various empirically derived standard units for electrical resistance were developed in connection with early telegraphy practice, and the British Association for the Advancement of Science proposed a unit derived from existing units of mass, length and time, and of a convenient scale for practical work as early as 1861.

The MKS system of units is a physical system of measurement that uses the metre, kilogram, and second (MKS) as base units. The modern International System of Units (SI) was originally created as a formalization of the MKS system, and although the SI has been redefined several times since then and is now based entirely on fundamental physical constants, it still closely approximates the original MKS system for most practical purposes.

The International Electrical Congress was a series of international meetings, from 1881 - 1904, in the then new field of applied electricity. The first meeting was initiated by the French government, including official national representatives, leading scientists, and others. Subsequent meetings also included official representatives, leading scientists, and others. Primary aims were to develop reliable standards, both in relation to electrical units and electrical apparatus.

A conventional electrical unit is a unit of measurement in the field of electricity which is based on the so-called "conventional values" of the Josephson constant, the von Klitzing constant agreed by the International Committee for Weights and Measures (CIPM) in 1988, as well as ΔνCs used to define the second. These units are very similar in scale to their corresponding SI units, but are not identical because of the different values used for the constants. They are distinguished from the corresponding SI units by setting the symbol in italic typeface and adding a subscript "90" – e.g., the conventional volt has the symbol V90 – as they came into international use on 1 January 1990.

The watt is the unit of power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m2⋅s−3. It is used to quantify the rate of energy transfer. The watt is named in honor of James Watt (1736–1819), an 18th-century Scottish inventor, mechanical engineer, and chemist who improved the Newcomen engine with his own steam engine in 1776. Watt's invention was fundamental for the Industrial Revolution.

<span class="mw-page-title-main">International Exposition of Electricity</span> Worlds fair held in Paris, France

The first International Exposition of Electricity in Paris ran from August 15, 1881 through to November 15, 1881 at the Palais de l'Industrie on the Champs-Élysées. It served to display the advances in electrical technology since the small electrical display at the 1878 Universal Exposition. Exhibitors came from the United Kingdom, United States, Germany, Italy and the Netherlands, as well as from France. As part of the exhibition, the first International Congress of Electricians presented numerous scientific and technical papers, including definitions of the standard practical units volt, ohm and ampere.

<span class="mw-page-title-main">History of the metric system</span> History of the metric system measurement standards

The history of the metric system began during the Age of Enlightenment with measures of length and weight derived from nature, along with their decimal multiples and fractions. The system became the standard of France and Europe within half a century. Other measures with unity ratios were added, and the system went on to be adopted across the world.

References

  1. 1 2 Fleming, John Ambrose (1911). "Units, Physical"  . In Chisholm, Hugh (ed.). Encyclopædia Britannica . Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745, see page 742.
  2. ↑ Gauss, C. F. (1832–37), "Intensitas vis magneticae terrestris ad mensuram absolutam revocata", Commentationes Societatis Regiae Scientiarum Gottingensis Recentiores, 8: 3–44. English translation.
  3. ↑ Neumann, F. E. (1847), "Allgemeine Gesetze der induciten elektrischen Ströme", Abhandlungen der Königlichen Preußischen Akademie der Wissenschaften zu Berlin: Aus dem Jahre 1845: 1–87, archived from the original on 8 June 2011, retrieved 9 April 2018; Reprinted: "Die mathematischen Gesetze der induciten elektrischen Ströme", Franz Neumanns gesammelte Werke, vol. 3, Leipzig: B. G. Teubner, 1912, pp. 257–344.
  4. ↑ Neumann, F. (1849), "Über ein allgemeines Princip der mathematischen Theorie inducirter elektrischer Ströme", Abhandlungen der Königlichen Preußischen Akademie der Wissenschaften zu Berlin: Aus dem Jahre 1847: 1–71, archived from the original on 8 June 2011, retrieved 9 April 2018; Reprinted: Franz Neumanns gesammelte Werke, vol. 3, Leipzig: B. G. Teubner, 1912, pp. 345–424.
  5. ↑ Chisholm, Hugh, ed. (1911). "Weber, Wilhelm Eduard"  . Encyclopædia Britannica . Vol. 28 (11th ed.). Cambridge University Press. p. 458.
  6. ↑ Weber, W.E. (1851). "Messungen galvanischer Leitungswiderstände nach einem absoluten Maaße". Annalen der Physik und Chemie. 82 (3): 337–369. Bibcode:1851AnP...158..337W. doi:10.1002/andp.18511580302. Reprinted in: Weber, Wilhelm (1893). "Messungen galvanischer Leitungswiderstände nach einem absoluten Maasse". Wilhelm Weber's Werke. Springer. pp. 276–300. doi:10.1007/978-3-662-24693-1_9. ISBN   978-3-662-22762-6. and Weber, Wilhelm (1851). "Messungen galvanischer Leitungswiderstände nach einem absoluten Maasse". Annalen der Physik. 158 (3): 337–369. Bibcode:1851AnP...158..337W. doi:10.1002/andp.18511580302. English translation: Translated by E. Atkinson. "On the Measurement of Electric Resistance according to an absolute Standard". Philosophical Magazine. 22, Fourth Series: 226–240 and 261–269. 1840.
  7. ↑ G.C.F. (1891). "Wilhelm Eduard Weber". Nature. 44 (1132): 229–230. Bibcode:1891Natur..44..229G. doi: 10.1038/044229b0 . S2CID   4060786.
  8. 1 2 Fleming, John Ambrose (1911). "Units, Physical"  . In Chisholm, Hugh (ed.). Encyclopædia Britannica . Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745, see page 740.
  9. ↑ "Recommendations adopted by the General Committee at the Manchester meeting in September 1861". Report of the Thirty-First meeting of the British Association for the Advancement of Science. Vol. 31. London: John Murray. 1862. pp. xxxix–xl.
  10. ↑ "Recommendations adopted by the General Committee at the Cambridge meeting in October 1862". Report of the Thirty-Second meeting of the British Association for the Advancement of Science. Vol. 32. London: John Murray. 1863. pp. xxxix.
  11. ↑ "Report of the General Committee appointed by the British Association on Standards of Electrical Resistance". Report of the Thirty-Third Meeting of the British Association for the Advancement of Science. Vol. 33. London: John Murray. 1864. pp. 111–176.
  12. ↑ Fleming, John Ambrose (1911). "Units, Physical"  . In Chisholm, Hugh (ed.). Encyclopædia Britannica . Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745, see page 743.
  13. 1 2 Fleming, John Ambrose (1911). "Units, Physical"  . In Chisholm, Hugh (ed.). Encyclopædia Britannica . Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745, see page 741.
  14. ↑ ohm, sizes.com, retrieved 2010-08-11.
  15. ↑ T.C. Mendenhall (1895). "Legal Units of Electric Measure". Science. 1 (1): 9–15. Bibcode:1895Sci.....1....9M. doi:10.1126/science.1.1.9. JSTOR   1623949. PMID   17835949.
  16. 1 2 3 Fleming, John Ambrose (1911). "Units, Physical"  . In Chisholm, Hugh (ed.). Encyclopædia Britannica . Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745.
  17. 1 2 3 Giovanni Giorgi, International Electrotechnical Commission, retrieved 2014-02-21.
  18. ↑ Giorgi, G., Rational Units of Electromagnetism. Original manuscript with handwritten notes by Oliver Heaviside Archived 2019-10-29 at the Wayback Machine .
  19. ↑ Heaviside, O. (1882). "The Relations between Magnetic Force and Electric Current". The Electrician (18 November): 6..
  20. ↑ Glazebrook, R. T. (1936), "The fourth unit of the Giorgi system of electrical units", Proc. Phys. Soc., 48 (3): 452–455, Bibcode:1936PPS....48..452G, doi:10.1088/0959-5309/48/3/312 .
  21. ↑ International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 144, ISBN   92-822-2213-6, archived (PDF) from the original on 2021-06-04, retrieved 2021-12-16.
  22. ↑ International Union of Pure and Applied Chemistry (1993). Quantities, Units and Symbols in Physical Chemistry , 2nd edition, Oxford: Blackwell Science. ISBN   0-632-03583-8 . p. 114. Electronic version..
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.