Italian cruiser Monzambano

Last updated

Italian cruiser Monzambano.jpg
Monzambanoshortly after entering service in 1889
History
Flag of Italy (1861-1946) crowned.svg Kingdom of Italy
NameMonzambano
Builder Arsenale di La Spezia
Laid down25 August 1885
Launched14 March 1888
Commissioned11 August 1889
Stricken26 August 1901
Fate Broken up, 1901
General characteristics
Class and type Goito-class torpedo cruiser
Displacement856 long tons (870  t)
Length73.4 m (241 ft)
Beam7.88 m (25.9 ft)
Draft3.5 m (11 ft)
Installed power
Propulsion
Speed18  kn (33 km/h; 21 mph)
Range1,100 nautical miles (2,000 km; 1,300 mi) at 10 kn (19 km/h; 12 mph)
Complement105–121
Armament
Armor Deck: 1.5 in (38 mm)

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina (Royal Navy) in the 1880s. The ship was built at the Arsenale di La Spezia , beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots (33 km/h; 21 mph). The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

Contents

Design

Monzambano was 73.4 meters (241 ft) long overall and had a beam of 7.88 m (25.9 ft) and an average draft of 3.31 m (10.9 ft). She displaced 856 long tons (870  t ) normally. Her propulsion system consisted of three double-expansion steam engines each driving a single screw propeller, with steam supplied by four coal-fired locomotive boilers. Exact figures for the ship's performance have not survived, but the members of the Goito class could steam at a speed of about 18 knots (33 km/h; 21 mph) from 2,500 to 3,180 indicated horsepower (1,860 to 2,370 kW). Monzambano had a cruising radius of 1,100 nautical miles (2,000 km; 1,300 mi) at a speed of 10 knots (19 km/h; 12 mph). She had a crew of between 105 and 121. [1]

The primary armament for Monzambano was five 14 in (356 mm) torpedo tubes. She carried a light gun battery for defense against torpedo boats. This consisted of six 57 mm (2.2 in) 40-caliber guns, which were mounted singly. The ship was protected with an armored deck that was 1.5 in (38 mm) thick. [1]

Service history

Monzambano was laid down at the Arsenale di La Spezia on 25 August 1885, the first member of her class to begin construction. She was launched on 14 March 1888 and fitting-out work was completed on 11 August 1889. [1] In 1893, Monzambano was laid up in La Spezia for the year, along with several other torpedo cruisers of the Partenope class, her sister Goito, and Pietro Micca; at the time, the Italian fleet mobilized only a handful of vessels for the annual training maneuvers, preferring to keep the most modern vessels in reserve to reduce maintenance costs. [2] That year, Monzambano was activated for the major fleet maneuvers conducted in July with the 1st Division, with the ironclad battleships Lepanto and Ruggiero di Lauria, the torpedo cruiser Euridice, and four torpedo boats. She served in the attacking squadron during a set of exercises that simulated a French attack on Naples. [3] [4] On 1 October, she was stationed in Taranto along with the ironclads Affondatore and Ancona, the protected cruisers Liguria, Umbria, and Etruria, the torpedo cruisers Montebello and Confienza, and several other vessels. She remained there through 1894. [5]

In 1895, Monzambano was stationed in the 2nd Maritime Department, split between Taranto and Naples, along with most of the torpedo cruisers in the Italian fleet. These included her sister ships Goito, Montebello, and Confienza, the eight Partenope-class cruisers, and Tripoli. [6] In 1898, Monzambano was assigned to the Levant Squadron that patrolled the eastern Mediterranean. She served on the station with the ironclad battleship Sardegna, the protected cruiser Etruria, Montebello, and the torpedo cruiser Aretusa. [7] The ship was stricken on 26 August 1901 and broken up for scrap. [1]

Notes

  1. 1 2 3 4 Fraccaroli, p. 347.
  2. ↑ Garbett 1893, p. 567.
  3. ↑ Clarke & Thursfield, pp. 202–203.
  4. ↑ Lansdale, pp. 355–357.
  5. ↑ Garbett 1894, p. 201.
  6. ↑ Garbett 1895, p. 90.
  7. ↑ Garbett 1899, p. 855.

Related Research Articles

Italian ironclad <i>Affondatore</i> Ironclad warship of the Italian Royal Navy

Affondatore was an armoured ram of the Regia Marina, built in the 1860s by Harrison, Millwall, London. Construction commenced in 1863; the ship, despite being incomplete, was brought to Italy during the Third Italian War of Independence. Affondatore, which translates as "Sinker", was initially designed to rely on her ram as her only weapon, but during construction she was also equipped with two 300-pounder guns.

Italian ironclad <i>Lepanto</i> Ironclad warship of the Italian Royal Navy

Lepanto was an Italian ironclad battleship built for the Italian Regia Marina, the second and last ship of the Italia class. Lepanto was laid down in November 1876, launched in March 1883, and completed in August 1887. She was armed with a main battery of four 432 mm (17 in) guns mounted in a central barbette and was capable of a top speed of 17.8 knots. Unlike other capital ships of the era, Lepanto had an armored deck rather than the more typical belt armor.

Italian ironclad <i>Ruggiero di Lauria</i> Ironclad warship of the Italian Royal Navy

Ruggiero di Lauria was an ironclad battleship built in the 1880s for the Italian Regia Marina. She was the lead ship of the Ruggiero di Lauria class, which included two other ships, Francesco Morosini and Andrea Doria. Ruggiero di Lauria, named for the medieval Sicilian admiral Ruggiero di Lauria, was armed with a main battery of four 432 mm (17 in) guns, was protected with 451 mm (17.75 in) thick belt armor, and was capable of a top speed of 17 knots.

Italian cruiser <i>Stromboli</i> Protected cruiser of the Italian Royal Navy

Stromboli was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the second member of the Etna class, which included three sister ships. She was named for the volcanic island of Stromboli, and was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She returned to Italy in 1901 and spent the rest of her career in reserve or as an ammunition ship, apart from a brief stint in active service in 1904. Stromboli was stricken from the naval register in 1907 and sold for scrapping in 1911.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Minerva</i> Torpedo cruiser of the Italian Royal Navy

Minerva was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. The second of eight ships, Minerva was built by Gio. Ansaldo & C.; her keel was laid down in February 1889, she was launched in February 1892, and she was commissioned in August that year. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns. Minerva spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was converted into a minelayer in 1909–1910. She did not see significant action during the Italo-Turkish War in 1911 or World War I in 1915–1918, though she was used to lay defensive minefields during the latter conflict. The ship was sold for scrap in 1921.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Urania</i> Torpedo cruiser of the Italian Royal Navy

Urania was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantieri navali Odero shipyard; her keel was laid in February 1889, she was launched in June 1891, and was commissioned in July 1893. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Urania spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was still in service at the outbreak of the Italo-Turkish War in September 1911, but she did not take part in any operations. Instead, she remained in Italian waters and was broken up for scrap in January 1912.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Aretusa</i> Torpedo cruiser of the Italian Royal Navy

Aretusa was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in June 1889 at the Cantiere navale fratelli Orlando shipyard, she was launched in March 1891 and was commissioned in September 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Aretusa spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. At the start of the Italo-Turkish War in September 1911, she was assigned to the Red Sea Squadron in Italian Eritrea. She bombarded Ottoman positions in the Arabian Peninsula and took part in a blockade of the coast. Worn out by the end of the war in October 1912, Aretusa was sold for scrap that December and broken up.

Italian cruiser <i>Caprera</i> Torpedo cruiser of the Italian Royal Navy

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Saetta</i> Torpedo cruiser of the Italian Royal Navy

Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina in the 1880s. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in May 1887, and was completed in February 1888. Saetta spent the first decade of her career serving in the main Italian fleet, where she conducted peacetime training exercises. In 1897, she was withdrawn from front-line service and employed as a gunnery training ship, a role she filled for another decade. The Regia Marina ultimately sold Saetta for scrap in May 1908.

Italian cruiser <i>Folgore</i> Torpedo cruiser of the Italian Royal Navy

Folgore was a torpedo cruiser built for the Italian Regia Marina, the lead ship of the Folgore class. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in September 1886, and was completed in February 1887. The ship spent her first two years in service either conducting training maneuvers with the main Italian fleet or in reserve status. She was badly damaged in a collision with the cruiser Giovanni Bausan in 1889, which reduced her effectiveness and cut her career short. Folgore spent the next eleven years primarily in the reserve, until she was sold for scrap in April 1901 and broken up.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Confienza</i> Torpedo cruiser of the Italian Royal Navy

Confienza was the last of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 17 knots. The ship was built in the late 1880s, with her keel laying in September 1887 at the Arsenale di La Spezia; she was completed in April 1890 and thereafter entered service with the Italian fleet. Confienza had a short and uneventful career; she spent her time in Italian waters and did not see any action. Stricken from the naval register in August 1901, she was thereafter broken up for scrap.

<i>Goito</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Goito class was a group of four torpedo cruisers built for the Italian Regia Marina in the 1880s. The members of the class were Goito, Montebello, Monzambano, and Confienza. They were among the first torpedo cruisers built for the Italian fleet, and were built to improve on the previous vessel, Tripoli. Experimental ships, the four Goito-class vessels varied in their dimensions, machinery, and armament, though all were comparable in terms of capabilities, having a top speed of 17 to 18 knots and carrying an armament of four or five 14-inch (360 mm) torpedo tubes.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.