Goito-class cruiser

Last updated

Italian cruiser Goito.jpg
Goito early in her career with canvas awnings erected
Class overview
Operators Kingdom of Italy
Preceded by Tripoli
Succeeded by Folgore class
Built18851890
In commission18881920
Completed4
Scrapped4
General characteristics for Goito [lower-alpha 1]
Type Torpedo cruiser
Displacement
Length73.4 m (240 ft 10 in)
Beam7.88 m (25 ft 10 in)
Draft3.6 m (11 ft 10 in)
Installed power
Propulsion
Speed18  kn (33 km/h; 21 mph)
Range1,100 nautical miles (2,000 km; 1,300 mi) at 10 kn (19 km/h; 12 mph)
Complement105121
Armament
Armor Deck: 1.5 in (38 mm)

The Goito class was a group of four torpedo cruisers built for the Italian Regia Marina (Royal Navy) in the 1880s. The members of the class were Goito, Montebello, Monzambano, and Confienza. They were among the first torpedo cruisers built for the Italian fleet, and were built to improve on the previous vessel, Tripoli. Experimental ships, the four Goito-class vessels varied in their dimensions, machinery, and armament, though all were comparable in terms of capabilities, having a top speed of 17 to 18 knots (31 to 33 km/h; 20 to 21 mph) and carrying an armament of four or five 14-inch (360 mm) torpedo tubes.

Contents

All four ships spent the majority of their time in service with the main Italian fleet, alternating between active duty for training exercises and reserve status. In 1897, Goito was converted into a minelayer and Montebello became a training ship for engine room personnel. Monzambano and Confienza were simply sold for scrap in 1901. Goito laid defensive minefields after Italy entered World War I in 1915, but otherwise did not see action during the war. The two surviving vessels remained in the Italian fleet until 1920, when they too were broken up for scrap.

Design

The first three members of the Goito class was designed by Engineering General Inspector Benedetto Brin, while Confienza was designed by Engineering Director Giacinto Pullino. [1] Brin had previously designed several classes of very large ironclad battleships, including the Duilio and Italia classes, but by the 1880s, he had begun to embrace the ideas of the Jeune École , which emphasized small, fast, torpedo-armed vessels that could damage or destroy the much larger battleships at a fraction of the cost. [2] The four Goitos were similar to the preceding cruiser Tripoli, the first torpedo cruiser Brin designed. As these were among the initial designs prepared by the Italian navy, they were experimental; Brin and Pullino used different hull shapes for all four vessels and fitted them with a variety of propulsion systems and armament. [3]

General characteristics and machinery

Monzambano
shortly after entering service Italian cruiser Monzambano.jpg
Monzambano shortly after entering service

As a result of their experimental nature, the ships of the Goito class varied slightly in size. They all were 70 meters (229 ft 8 in) long at the waterline and 73.4 m (240 ft 10 in) long overall, but their beam varied from 7.88 to 8.05 m (25 ft 10 in to 26 ft 5 in) and their draft ranged from 3.04 to 3.6 m (10 ft 0 in to 11 ft 10 in). The ships were built with steel hulls. They displaced 756 to 856 long tons (768 to 870 t) normally and 955 to 974 long tons (970 to 990 t) at full load. They had a crew of between 105 and 121. [1]

The first three ships had similar propulsion systems that consisted of three steam engines, each driving a single screw propeller. Goito and Monzambano had double-expansion engines, while Montebello had more advanced triple-expansion engines. Confienza instead used a two-shaft configuration for her double-expansion engines. Steam for the engines was supplied by coal-fired locomotive boilers; Goito and Montebello had six boilers, while Monzambano and Confienza had four. The boilers for Goito and Monzambano were trunked into two funnels, Montebello had three, and Confienza only had one. [1]

Exact figures for the first three ships' performance have not survived, but they could steam at a speed of about 18 knots (33 km/h; 21 mph) from 2,500 to 3,180 indicated horsepower (1,860 to 2,370 kW). Confienza, with only two screws, had a top speed of 17 knots (31 km/h; 20 mph) from 1,962 ihp (1,463 kW). In 1894, Goito had her center engine and screw removed and her original boilers replaced with oil-fired models. With these changes, her engines were capable of producing 17.2 knots (31.9 km/h; 19.8 mph) from 2,521 ihp (1,880 kW). The ships had a cruising radius of 1,100 nautical miles (2,000 km; 1,300 mi) at a speed of 10 knots (19 km/h; 12 mph). They were originally fitted with a fore-and-aft sailing rig to supplement the steam engines, though they were later removed. [1]

Armament and armor

Confienza
; note the 4.7 in gun on her bow Italian cruiser Confienza.jpg
Confienza; note the 4.7 in gun on her bow

The primary armament for the Goito class was five 14 in (356 mm) torpedo tubes, though Montebello only had four tubes. The ships also carried a variety of light guns. Goito was equipped with five 57 mm (2.2 in) 40-caliber (cal.) guns, two 37 mm (1.5 in) 20-cal. guns, and three 37 mm revolving Hotchkiss guns, all mounted singly. Montebello had six 57 mm guns and two 37 mm guns, and Monzambano carried only six 57 mm guns. Confienza was the only vessel to carry a medium-caliber gun, a single 4.7 in (120 mm) 32-cal. gun mounted on her bow. She also carried six 57 mm guns and two 37 mm guns. The ships were protected with an armored deck that was 1.5 in (38 mm) thick. [1]

Ships

Construction data
NameBuilder [1] Laid down [1] Launched [1] Completed [1]
Goito Regio Cantiere di Castellammare di Stabia , Castellammare di Stabia September 18856 July 188716 February 1888
Monzambano Arsenale di La Spezia , La Spezia 25 August 188514 March 188811 August 1889
Montebello 25 September 188514 March 188821 January 1889
Confienza September 188728 July 188911 April 1890

Service history

Montebello
early in her career Italian cruiser Montebello.jpg
Montebello early in her career

All four Goito-class cruisers served with the main Italian fleet for the majority of their careers. This time was spent either laid up in the reserve component of the fleet, or activated for yearly training maneuvers. These frequently gamed a French attack on Italy, as in the case of the 1888 maneuversfor which only Goito had been completed in time to participatethat simulated a French attack on La Spezia, [4] or the 1893 maneuvers, which tested a French attack on Naples. [5] In 1898, Monzambano and Montebello participated in a rare deployment for members of the class when they were assigned to the Levant Squadron that was tasked with patrolling the eastern Mediterranean Sea. [6] Throughout this period, the ships of the class would either be distributed among the divisions of the fleet, as with the case of the annual training maneuvers, or stationed together while in reserve status; in 1895, for example, the four Goitos were assigned to the 2nd Maritime Department, along with Tripoli and the eight Partenope-class torpedo cruisers. [7]

In 1897, Goito was withdrawn from front-line service and converted in a minelayer, with a capacity for 60 naval mines in place of her torpedo tubes. Montebello remained on active duty until 1898, when she was converted into a training ship for engine room personnel, and was re-boilered with coal- and oil-fired equipment from several manufacturers in 1903. Confienza and Monzambano were the last members of the class to leave active service, being stricken from the naval register on the same day, 26 August 1901 and sold for scrapping. [1] Goito continued to take part in fleet maneuvers as late as 1907 in her minelayer configuration, [8] and both she and Manzambano remained in the Regia Marina's inventory during the Italo-Turkish War of 1911–1912 [9] and World War I. Neither ship saw action in either conflict, though Goito laid defensive minefields in the Adriatic Sea after Italy entered World War I in 1915. [10] Montebello was eventually stricken on 26 January 1920, and Goito followed her to the breakers' yard on 15 March. [1]

Footnotes

Notes

  1. Figures are for Goito; the other three vessels varied in armament and size

Citations

Related Research Articles

Italian ironclad <i>Affondatore</i> Ironclad warship of the Italian Royal Navy

Affondatore was an armoured ram of the Regia Marina, built in the 1860s by Harrison, Millwall, London. Construction commenced in 1863; the ship, despite being incomplete, was brought to Italy during the Third Italian War of Independence. Affondatore, which translates as "Sinker", was initially designed to rely on her ram as her only weapon, but during construction she was also equipped with two 300-pounder guns.

Italian ironclad <i>Lepanto</i> Ironclad warship of the Italian Royal Navy

Lepanto was an Italian ironclad battleship built for the Italian Regia Marina, the second and last ship of the Italia class. Lepanto was laid down in November 1876, launched in March 1883, and completed in August 1887. She was armed with a main battery of four 432 mm (17 in) guns mounted in a central barbette and was capable of a top speed of 17.8 knots. Unlike other capital ships of the era, Lepanto had an armored deck rather than the more typical belt armor.

Italian cruiser <i>Umbria</i> Protected cruiser of the Italian Royal Navy

Umbria was a protected cruiser of the Italian Regia Marina built in the 1890s. She was the lead ship of the Regioni class, which included five other vessels. All of the ships were named for current or former regions of Italy. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots. Umbria spent much of her career abroad, including several years in American waters. In service during a period of relative peace, Umbria never saw combat. In 1911, she was sold to Haiti and renamed Consul Gostrück, though she did not serve for very long under the Haitian flag. Her crew was too inexperienced to operate the ship, and she foundered shortly after being transferred to the Haitian Navy.

Italian cruiser <i>Coatit</i> Torpedo cruiser of the Italian Royal Navy

Coatit was a torpedo cruiser of the Italian Regia Marina built in the late 1890s. She was the second and final member of the Agordat class. The ship, which was armed with twelve 76 mm (3 in) guns and two 450 mm (17.7 in) torpedo tubes, was too slow and short-ranged to be able to scout effectively for the fleet, so her career was limited. She saw action during the Italo-Turkish War in 1911–1912, where she provided gunfire support to Italian troops in North Africa. She also caused a minor diplomatic incident from an attack on retreating Ottoman soldiers in Anatolia. Coatit was part of an international fleet sent to Constantinople when the city appeared to be at risk of falling to the Bulgarian Army during the First Balkan War. In 1919, she was converted into a minelayer and was sold for scrap in 1920.

Italian cruiser <i>Stromboli</i> Protected cruiser of the Italian Royal Navy

Stromboli was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the second member of the Etna class, which included three sister ships. She was named for the volcanic island of Stromboli, and was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She returned to Italy in 1901 and spent the rest of her career in reserve or as an ammunition ship, apart from a brief stint in active service in 1904. Stromboli was stricken from the naval register in 1907 and sold for scrapping in 1911.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Minerva</i> Torpedo cruiser of the Italian Royal Navy

Minerva was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. The second of eight ships, Minerva was built by Gio. Ansaldo & C.; her keel was laid down in February 1889, she was launched in February 1892, and she was commissioned in August that year. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns. Minerva spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was converted into a minelayer in 1909–1910. She did not see significant action during the Italo-Turkish War in 1911 or World War I in 1915–1918, though she was used to lay defensive minefields during the latter conflict. The ship was sold for scrap in 1921.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Urania</i> Torpedo cruiser of the Italian Royal Navy

Urania was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantieri navali Odero shipyard; her keel was laid in February 1889, she was launched in June 1891, and was commissioned in July 1893. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Urania spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was still in service at the outbreak of the Italo-Turkish War in September 1911, but she did not take part in any operations. Instead, she remained in Italian waters and was broken up for scrap in January 1912.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Saetta</i> Torpedo cruiser of the Italian Royal Navy

Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina in the 1880s. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in May 1887, and was completed in February 1888. Saetta spent the first decade of her career serving in the main Italian fleet, where she conducted peacetime training exercises. In 1897, she was withdrawn from front-line service and employed as a gunnery training ship, a role she filled for another decade. The Regia Marina ultimately sold Saetta for scrap in May 1908.

Italian cruiser <i>Folgore</i> Torpedo cruiser of the Italian Royal Navy

Folgore was a torpedo cruiser built for the Italian Regia Marina, the lead ship of the Folgore class. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in September 1886, and was completed in February 1887. The ship spent her first two years in service either conducting training maneuvers with the main Italian fleet or in reserve status. She was badly damaged in a collision with the cruiser Giovanni Bausan in 1889, which reduced her effectiveness and cut her career short. Folgore spent the next eleven years primarily in the reserve, until she was sold for scrap in April 1901 and broken up.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Monzambano</i> Torpedo cruiser of the Italian Royal Navy

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina in the 1880s. The ship was built at the Arsenale di La Spezia, beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

Italian cruiser <i>Confienza</i> Torpedo cruiser of the Italian Royal Navy

Confienza was the last of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 17 knots. The ship was built in the late 1880s, with her keel laying in September 1887 at the Arsenale di La Spezia; she was completed in April 1890 and thereafter entered service with the Italian fleet. Confienza had a short and uneventful career; she spent her time in Italian waters and did not see any action. Stricken from the naval register in August 1901, she was thereafter broken up for scrap.

<i>Folgore</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Folgore class was a pair of torpedo cruisers built for the Italian Regia Marina in the 1880s. The two ships—Folgore and Saetta—were designed by Benedetto Brin during a period of experimentation with the theories of the Jeune École in the 1880s. The vessels were armed with three 14 in (356 mm) torpedo tubes, and they had a top speed of 17 knots. Both ships' careers were uneventful, and they spent most of their time in service conducting training exercises. Folgore was seriously damaged in a collision in 1889, and was thereafter reduced to reserve status, as the damage could not be completely repaired. She was eventually sold for scrapping in 1900, while Saetta served as a gunnery training ship from 1897 to 1908, when she too was dismantled.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References