Italian battleship Dante Alighieri

Last updated

Italian battleship Dante Alighieri.jpg
Dante Alighieri on 29 March 1914
Class overview
OperatorsFlag of Italy (1861-1946) crowned.svg  Regia Marina
Preceded by Regina Elena class
Succeeded by Conte di Cavour class
Built1909–1913
In commission1913–1928
Completed1
Scrapped1
History
Flag of Italy (1861-1946) crowned.svg Italy
NameDante Alighieri
Namesake Dante Alighieri
Builder Regio Cantiere di Castellammare di Stabia, Castellammare di Stabia
Laid down6 June 1909
Launched20 August 1910
Completed15 January 1913
Stricken1 July 1928
Fate Scrapped, 1928
General characteristics
Type Dreadnought battleship
Displacement19,552 long tons (19,866  t) (normal)
Length168.1 m (551 ft 6 in) (o/a)
Beam26.6 m (87 ft 3 in)
Draught8.8 m (28 ft 10 in)
Installed power
Propulsion4 × shafts; 4 × steam turbines
Speed22 knots (41 km/h; 25 mph)
Range4,800  nmi (8,900 km; 5,500 mi) at 10 knots (19 km/h; 12 mph)
Complement981 officers and enlisted men
Armament
Armor

Dante Alighieri was the first dreadnought battleship built for the Regia Marina (Royal Italian Navy) and was completed in 1913. The ship served as a flagship during World War I, but saw very little action other than the Second Battle of Durazzo in 1918 during which she did not engage enemy forces. She never fired her guns in anger during her career. Dante Alighieri was refitted in 1923, stricken from the Navy List five years later and subsequently sold for scrap.

Contents

Description

Right elevation and plan of Dante Alighieri from Brassey's Naval Annual 1923; the shaded areas are armored DanteAligheriDrawing.jpg
Right elevation and plan of Dante Alighieri from Brassey's Naval Annual 1923; the shaded areas are armored

Dante Alighieri was designed by Rear Admiral Engineer Edoardo Masdea, Chief Constructor of the Regia Marina, based on the ideas of General Vittorio Cuniberti who advocated a battleship with main guns of a single caliber and optimized for broadside fire. In addition, the ship's superstructure and funnels were to be kept to a minimum. [1]

The dreadnought was 158.4 meters (519 ft 8 in) long at the waterline, and 168.1 meters (551 ft 6 in) overall. The ship had a beam of 26.6 meters (87 ft 3 in), and a draft of 8.8 meters (28 ft 10 in). She displaced 19,552 tonnes (19,243 long tons ) at normal load, and 21,600 tonnes (21,300 long tons) at deep load. [2] Dante Alighieri had two rudders, one behind the other, [3] and a crew of 31 officers and 950 enlisted men. [2]

The ship was propelled by four propeller shafts driven by Parsons steam turbines. Steam for the turbines was provided by 23 Blechynden water-tube boilers, seven of which burned oil and the remaining sixteen burned a mixture of oil and coal. The boilers were widely separated in two compartments, each with two funnels, and the turbines were positioned between the two center turrets. [3] Designed to reach a maximum speed of 23 knots (43 km/h; 26 mph) from 35,000 shaft horsepower (26,000  kW ), [1] Dante Alighieri failed to reach this goal on her sea trials, making a maximum speed of only 22.83 knots (42.28 km/h; 26.27 mph) from 32,190 shp (24,000 kW). [2] The ship could store a maximum of 3,000 tonnes (2,953 long tons) of coal and an unknown quantity of fuel oil [1] that gave her a range of 4,800 nautical miles (8,900 km; 5,500 mi) at 10 kn (19 km/h; 12 mph), and 1,000 nmi (1,900 km; 1,200 mi) at 22 knots (41 km/h; 25 mph). [2]

Dante Alighieri had a complete waterline armor belt that had a maximum thickness of 254 millimeters (10 in). The ship's armored deck was 38 mm (1.5 in) thick. The main turrets were protected by a maximum of 254 millimeters of armor while the secondary turrets and the casemates had 98 millimeters (3.9 in) of armor. The conning tower had walls 305 millimeters thick. [2]

Armament

Dante Alighieri's main armament consisted of a dozen 46-caliber 305-millimeter (12 inch) guns, [3] in four triple-gun turrets positioned on the ship's centerline. None of the turrets were superfiring. [2] While the later classes of battleships and battlecruisers designed for the Imperial Russian Navy shared the turret layout of the Dante Alighieri, all surviving evidence shows that the Russians decided on this layout for their own reasons. [4]

Sources disagree regarding these guns' performance, but naval historian Giorgio Giorgerini claims that they fired 452-kilogram (996 lb) armor-piercing (AP) projectiles at the rate of one round per minute and that they had a muzzle velocity of 840 metres per second (2,800 ft/s) which gave a maximum range of 24,000 meters (26,000 yd). [5] [Note 1]

Dante Alighieri in 1919 Dante Alighieri NH 47567.jpg
Dante Alighieri in 1919

The ship's secondary armament consisted of twenty 50-caliber 120-millimeter (4.7 in) guns. Eight of these guns were fitted in twin-gun turrets abreast the forward and aft main gun turrets while the remaining 12 guns were mounted in casemates on the sides of the hull. These guns could depress to 10 degrees and had a maximum elevation of +15 degrees; they had a rate of fire of six shots per minute. They could fire a 22.1-kilogram (49 lb) high-explosive projectile with a muzzle velocity of 850 meters per second (2,800 ft/s) to a maximum distance of 12,000 yards (11,000 m). For defense against torpedo boats, Dante Alighieri carried thirteen 50-caliber 76 mm (3 in) guns mounted on the turret tops. These guns had the same range of elevation as the secondary guns, although their rate of fire was higher at 10 rounds per minute. They fired a 6-kilogram (13 lb) AP projectile with a muzzle velocity of 815 meters per second (2,670 ft/s) to a maximum distance of 10,000 yards (9,100 m). [7] [Note 2] The ship was also fitted with three submerged 45-centimeter (17.7 in) torpedo tubes, one on each broadside and the third in the stern. [1]

Construction and service

Dante Alighieri in Taranto Dante Alighieri.png
Dante Alighieri in Taranto

Dante Alighieri was named after the medieval Italian poet. [9] She was laid down at the naval shipyard in Castellammare di Stabia on 6 June 1909, launched on 20 August 1910, and completed on 15 January 1913. [2] The ship was used to evaluate Curtiss floatplanes in 1913–14. [10] When Italy entered World War I in May 1915, Dante Alighieri was the flagship of the 1st Battle Squadron based at Taranto and remained with the squadron through 1916. For the rest of the war, the ship was assigned to the Southern Adriatic and Ionian Sea forces. [1] Under the command of Vice Admiral Paolo Thaon di Revel, the ship was positioned to intercept any Austro-Hungarian ships based at Cattaro if they sortied to attack the Allied ships bombarding Durazzo on 2 October 1918. The Austro-Hungarians remained in harbor and Dante Alighieri did not fire her guns during the battle. [11]

Dante Alighieri after being refitted, 1920s BB-1-1.jpg
Dante Alighieri after being refitted, 1920s

King Victor Emmanuel III entertained delegates to the Genoa Conference aboard Dante Alighieri in 1922. [12] The ship was refitted in 1923 with a tripod foremast and an aircraft flying-off platform on Turret No. 3, and her forward funnels were made taller to reduce smoke interference with the bridge. [3] She tested a new fire-control system in 1924 at ranges up to 26,000 meters (28,000 yd); her new tripod mast was not sturdy enough for the weight of the system, but it was judged to be successful and subsequently installed in the Conte di Cavour-class battleships. [13] That same year, the ship transported Benito Mussolini to Palermo, Sicily. [14] The Italian economy had been weakened by fighting in World War I, and by the late 1920s it could no longer afford to maintain a sizable fleet. As a result, Admiral Giovanni Sechi decided to scrap Dante Alighieri and the salvaged battleship Leonardo da Vinci to reduce the naval budget. [15] The ship was stricken on 1 July 1928 and was subsequently scrapped. [2]

Notes

  1. Friedman provides a variety of sources that show armor-piercing shell weights ranging from 416.92 to 452.32 kilograms (919.16 to 997.2 lb) and muzzle velocities around 861 metres per second (2,820 ft/s). [6]
  2. Sources disagree as to the type of 76 mm gun used aboard Dante Alighieri. Fraccaroli maintains that they were the older 40-caliber guns and replaced in 1915 with the newer 50-caliber guns, [2] but Preston [1] and Friedman say that they were 50-caliber guns from the beginning. [8]

Footnotes

  1. 1 2 3 4 5 6 Preston, p. 175
  2. 1 2 3 4 5 6 7 8 9 Fraccaroli, p. 259
  3. 1 2 3 4 Hore, p. 174
  4. McLaughlin, pp. 209–215
  5. Giorgerini, pp. 268, 276
  6. Friedman 2011, pp. 233–234
  7. Giorgerini, pp. 268, 277–278
  8. Friedman 2011, pp. 240–241
  9. Sandler, p. 102
  10. Cernuschi & O'Hara, p. 62
  11. Halpern, p. 175
  12. Fink, p. 41
  13. Friedman 2008, p. 262
  14. Dickie, p. 152
  15. Goldstein & Maurer, p. 226

Related Research Articles

Italian battleship <i>Giulio Cesare</i> Dreadnought battleship of the Italian Royal Navy

Giulio Cesare was one of three Conte di Cavour-class dreadnought battleships built for the Royal Italian Navy in the 1910s. Completed in 1914, she was little used and saw no combat during the First World War. The ship supported operations during the Corfu Incident in 1923 and spent much of the rest of the decade in reserve. She was rebuilt between 1933 and 1937 with more powerful guns, additional armor and considerably more speed than before.

<i>Conte di Cavour</i>-class battleship Battleship class of the Italian Royal Navy

The Conte di Cavour–class battleships were a group of three dreadnoughts built for the Royal Italian Navy in the 1910s. The ships were completed during World War I, but none saw action before the end of hostilities. Leonardo da Vinci was sunk by a magazine explosion in 1916 and sold for scrap in 1923. The two surviving ships, Conte di Cavour and Giulio Cesare, supported operations during the Corfu Incident in 1923. They were extensively reconstructed between 1933 and 1937 with more powerful guns, additional armor and considerably more speed than before.

Italian battleship <i>Conte di Cavour</i> Dreadnought battleship of the Italian Royal Navy

Conte di Cavour was the name ship of the three Conte di Cavour-class dreadnought battleships built for the Royal Italian Navy in the 1910s. Completed in 1915 she served during World War I, although she was little used and saw no combat. The ship supported operations during the Corfu Incident in 1923 and spent much of the rest of the decade in reserve. She was rebuilt between 1933 and 1937 with more powerful guns, additional armor and considerably more speed than before.

Italian battleship <i>Leonardo da Vinci</i> Dreadnought battleship of the Italian Royal Navy

Leonardo da Vinci was the last of three Conte di Cavour-class dreadnoughts built for the Regia Marina in the early 1910s. Completed just before the beginning of World War I, the ship saw no action and was sunk by a magazine explosion in 1916 with the loss of 248 officers and enlisted men. The Italians blamed Austro-Hungarian saboteurs for her loss, but it may have been accidental. Leonardo da Vinci was refloated in 1919 and plans were made to repair her. Budgetary constraints did not permit this, and her hulk was sold for scrap in 1923.

<i>Imperatritsa Mariya</i>-class battleship Imperial Russian Navys Imperatritsa Mariya-class dreadnoughts

The Imperatritsa Mariya-class battleships were the first dreadnoughts built for the Black Sea Fleet of the Imperial Russian Navy. All three ships were built in Nikolayev during World War I; two of the ships were built by the Rossud Dockyard and the third was built by the Associated Factories and Shipyards of Nikolayev. Two ships were delivered in 1915 and saw some combat against ex-German warships that had been 'gifted' to the Ottoman Empire, but the third was not completed until 1917 and saw no combat due to the disorder in the navy after the February Revolution earlier that year.

<i>Danton</i>-class battleship French semi-dreadnought battleship class

The Danton-class battleship was a class of six semi-dreadnought battleships built for the French Navy before World War I. The ships were assigned to the Mediterranean Fleet after commissioning in 1911. After the beginning of World War I in early August 1914, five of the sister ships participated in the Battle of Antivari. They spent most of the rest of the war blockading the Straits of Otranto and the Dardanelles to prevent warships of the Central Powers from breaking out into the Mediterranean. One ship was sunk by a German submarine in 1917.

<i>Andrea Doria</i>-class battleship Class of Italian battleships

The Andrea Doria class was a pair of dreadnought battleships built for the Royal Italian Navy between 1912 and 1916. The two ships—Andrea Doria and Duilio—were completed during World War I. The class was an incremental improvement over the preceding Conte di Cavour class. Like the earlier ships, Andrea Doria and Duilio were armed with a main battery of thirteen 305-millimeter (12.0 in) guns.

<i>Lyon</i>-class battleship Proposed fleet of battleships for the French Navy

The Lyon class was a set of battleships planned for the French Navy in 1913, with construction scheduled to begin in 1915. The class was to have comprised four ships, named Lyon, Lille, Duquesne, and Tourville. The first two were named for cities in France, and the latter pair honored the French admirals Abraham Duquesne and Anne Hilarion de Tourville. The Lyon class' design was an improvement on the previous Normandie class, utilizing a fourth quadruple-gun turret to mount a total of sixteen 34 cm (13.4 in) guns. Construction on the Lyons was cancelled due to the August 1914 outbreak of World War I, before any of the ships were laid down.

French battleship <i>Jauréguiberry</i> Pre-dreadnought battleship constructed for the French Navy

Jauréguiberry was a pre-dreadnought battleship constructed for the French Navy in the 1890s. Built in response to a naval expansion program of the British Royal Navy, she was one of a group of five roughly similar battleships, including Masséna, Bouvet, Carnot, and Charles Martel. Jauréguiberry was armed with a mixed battery of 305 mm (12 in), 274 mm (10.8 in) and 138 mm (5.4 in) guns. Constraints on displacement imposed by the French naval command produced a series of ships that were significantly inferior to their British counterparts, suffering from poor stability and a mixed armament that was difficult to control in combat conditions.

The Kii-class battleship was a planned class of four fast battleships to be built for the Imperial Japanese Navy (IJN) during the 1920s. Only two of the ships received names. They were intended to reinforce Japan's "eight-eight fleet" of eight battleships and eight battlecruisers after the United States announced a major naval construction program in 1919. However, after the signing of the Washington Naval Treaty in 1922, work on the ships was suspended; one pair was cancelled in November 1923 and the other in April 1924.

<i>Erzherzog Karl</i>-class battleship Austro-Hungarian battleship class

The Erzherzog Karl class was a class of pre-dreadnought battleships of the Austro-Hungarian Navy built before World War I. All of the battleships of the Erzherzog Karl-class were built in the Stabilimento Tecnico Triestino shipyards in Trieste. The first battleship, Erzherzog Karl was laid down in 1902. Construction on the remaining two battleships, Erzherzog Ferdinand Max and Erzherzog Friedrich continued up to 1905. Erzherzog Karl was commissioned in 1906, while Erzherzog Ferdinand Max and Erzherzog Friedrich were commissioned in 1907. The three Erzherzog Karl-class battleships were considered relatively modern by the time they were commissioned. However, small docking space and budget restraints resulted in the class being fairly compact. Nevertheless, they were well designed and properly protected. The Erzherzog Karl class were the last and largest pre-dreadnoughts built by the Austrian Navy. They were named after members of the Austrian Royal family.

The Number 13-class battleship was a planned class of four fast battleships to be built for the Imperial Japanese Navy (IJN) during the 1920s. The ships never received any names, being known only as Numbers 13–16. They were intended to reinforce Japan's "eight-eight fleet" of eight battleships and eight battlecruisers after the United States announced a major naval construction program in 1919. The Number 13 class was designed to be superior to all other existing battleships, planned or building. After the signing of the Washington Naval Treaty in 1922, they were cancelled in November 1923 before construction could begin.

<i>Satsuma</i>-class battleship Class of Japanese semi-dreadnoughts

The Satsuma class was a pair of semi-dreadnought battleships built for the Imperial Japanese Navy (IJN) in the first decade of the 20th century. They were the first battleships to be built in Japan and marked a transitional stage between the pre-dreadnought and true dreadnought designs. They saw no combat during World War I, although Satsuma led a squadron that occupied several German colonies in the Pacific Ocean in 1914. Both ships were disarmed and expended as targets in 1922–1924 in accordance with the terms of the Washington Naval Treaty of 1922.

<i>Francesco Caracciolo</i>-class battleship Cancelled dreadnought battleship of the Italian Royal Navy

The Francesco Caracciolo-class battleships were a group of four super-dreadnought battleships designed for the Regia Marina in 1913 and ordered in 1914. The first ship of the class, Francesco Caracciolo, was laid down in late 1914; the other three ships, Cristoforo Colombo, Marcantonio Colonna, and Francesco Morosini followed in 1915. Armed with a main battery of eight 381 mm (15 in) guns and possessing a top speed of 28 knots, the four ships were intended to be the equivalent of the fast battleships like the British Queen Elizabeth class.

French battleship <i>Henri IV</i> Pre-dreadnought battleship of the French Navy

Henri IV was a pre-dreadnought battleship of the French Navy built to test some of the ideas of the prominent naval architect Louis-Émile Bertin. She began World War I as guardship at Bizerte. She was sent to reinforce the Allied naval force in the Dardanelles campaign of 1915, although some of her secondary armament had been removed for transfer to Serbia in 1914. Afterwards, she was relegated to second-line roles before being sent to Taranto as a depot ship in 1918. She was struck from the navy list in 1920 and scrapped the following year.

<i>Pisa</i>-class cruiser Pisa class of three armored cruisers built

The Pisa class consisted of three armored cruisers built in Italy in the first decade of the 20th century. Two of these were for the Royal Italian Navy and the third was sold to the Royal Hellenic Navy and named Georgios Averof. This ship served as the Greek flagship for the bulk of her active career and participated in the Balkan Wars of 1912–1913, fighting in two battles against the Ottoman Navy. She played a minor role in World War II after escaping from Greece during the German invasion in early 1941. Influenced by communist agitators, her crew mutinied in 1944, but it was suppressed without any bloodshed. Georgios Averof returned to Greece after the German evacuation in late 1944 and became a museum ship in 1952. She is the only surviving armored cruiser in the world.

Italian monitor <i>Faà di Bruno</i> Italian monitor

Faà di Bruno was an Italian monitor built during World War I. Completed in 1917, the ship played a small role in the 11th Battle of the Isonzo later that year. She was decommissioned in 1924, but returned to service as the floating battery GM 194 at the beginning of World War II and was towed to Genoa and where she spent the rest of the war. The ship had her guns disabled when the Royal Navy bombarded Genoa in 1941. GM 194 was captured by the Germans after the Italian Armistice in 1943 and was turned over to the puppet Repubblica Sociale Italiana that they installed afterward. She was scuttled at the end of the war and subsequently scrapped.

Russian battleship <i>Imperator Nikolai I</i> (1916) Imperial Russian Navys dreadnought

Imperator Nikolai I was a Russian dreadnought built during World War I for service in the Black Sea. She was designed to counter multiple prospective Ottoman dreadnoughts which had been placed under order by the Ottoman government, since this raised the possibility that the Russian dreadnoughts being built for the Black Sea Fleet could be outclassed. The ship used the same main armament as the preceding Imperatritsa Mariya class, but was larger and more heavily armored. Imperator Nikolai I was launched in 1916, but construction was suspended on 24 October 1917. The Soviets considered completing her in 1923, but later rejected the idea. She was towed to Sevastopol in 1927 and scrapped.

<span class="mw-page-title-main">41 cm/45 3rd Year Type naval gun</span> Naval gun

The 41 cm/45 3rd Year Type naval gun is a 41-centimeter (16.1 in) breech-loading naval gun designed during World War I for the Imperial Japanese Navy. It served as the primary armament in the Nagato-class dreadnoughts completed after the end of the war and in coast defense mountings. Two turrets and their guns were salvaged during the 1970s from the wreck of the Japanese battleship Mutsu and are on display in Japan.

References