Italian cruiser Giovanni Bausan

Last updated

Italian cruiser Giovanni Bausan LOC 4a04852v.jpg
Giovanni Bausan
Class overview
Preceded byNone
Succeeded by Etna class
Completed1
History
Flag of Italy (1861-1946) crowned.svg Kingdom of Italy
NameGiovanni Bausan
Namesake Giovanni Bausan
Builder Elswick
Laid down21 August 1882
Launched15 December 1883
Commissioned9 May 1885
Decommissioned15 January 1920
FateSold for scrap, 1920
General characteristics
Type Protected cruiser
Displacement3,082 long tons (3,131  t)
Length89.32 m (293 ft) loa
Beam12.85 m (42 ft 2 in)
Draft5.98 m (19 ft 7 in)
Installed power
Propulsion
Speed17.4 knots (32.2 km/h; 20.0 mph)
Range3,500 nautical miles (6,500 km; 4,000 mi) at 10 knots (19 km/h; 12 mph)
Complement295
Armament
Armor Deck: 0.75–1.5-inch (19–38 mm)

Giovanni Bausan was a protected cruiser of the Italian Regia Marina (Royal Navy) that was designed and built by Sir W G Armstrong Mitchell & Co.'s Elswick Works in England in the mid-1880s. The finished ship entered service in May 1885. She was the first ship of this type to be built for the Italian fleet, and she provided the basis for subsequent designs built in Italy, including the Etna class. Giovanni Bausan was intended to serve as a "battleship destroyer", and was armed with a main battery of two 10-inch (254 mm) guns to give her the ability to defeat heavy armor, but design flaws rendered her unfit for this role.

Contents

Giovanni Bausan frequently served abroad. She participated in the conquest of Eritrea in 1887–1888 as the flagship of the Italian squadron during the campaign. She took part in the Venezuelan crisis of 1902–1903 alongside British and German warships. During the Italo-Turkish War of 1911–1912, she provided gunfire support to Italian troops ashore in North Africa. By the outbreak of the First World War, Giovanni Bausan had been relegated to secondary duties, first as a distilling ship, and later as a depot ship for seaplanes. The ship was disarmed during the conflict and ultimately was sold to ship-breakers in March 1920.

Design

The design of Giovanni Bausan was based on that of Elswick's earlier Esmeralda, built for Chile and designed by George Rendel, and was the first modern protected cruiser constructed for the Italian Navy. [1] The new ship was ordered in 1882 by Guglielmo Acton, then the Minister for the Navy, [2] and was named for Giovanni Bausan, a Neapolitan naval commander who fought in the French Revolutionary Wars and the Napoleonic Wars. [3] Referred to by some as a torpedo ram, [4] she was one of the first ships of her type. [5] Giovanni Bausan was intended for use as a "battleship destroyer", but the low rate of fire of her guns and her lack of steadiness as a gun platform made her ineffective in this role. [6] She nevertheless represented a temporary embrace of the theories of the Jeune École doctrine espoused by French naval architects and strategists. [7]

General characteristics and machinery

Plan and profile drawing of Giovanni Bausan Giovanni Bausan line-drawing.png
Plan and profile drawing of Giovanni Bausan

Giovanni Bausan was 84.12 meters (276 ft) long between perpendiculars and 89.32 m (293 ft) long overall. She had a beam of 12.85 m (42 ft 2 in) and a draft of 5.98 m (19 ft 7 in). The ship displaced 3,082 long tons (3,131  t ). Giovanni Bausan was steel-hulled, and had a crew of 295 officers and enlisted men, though later in her career this was reduced to 256. [8] The four Etna-class cruisers were half-sisters of Giovanni Bausan, built to a modified, slightly enlarged design. [6] She was equipped with a ram bow and initially fitted with rigging as a schooner. [9]

Giovanni Bausan was powered by two compound-expansion steam engines that each drove a screw propeller. Steam was provided by four cylindrical Scotch boilers, which were trunked into two funnels on the centerline. On trials, the engines produced 6,470 indicated horsepower (4,820 kW) for a top speed of 17.4 knots (32.2 km/h; 20.0 mph). At a cruising speed of 10 knots (19 km/h; 12 mph), the ship could steam for 5,000 nautical miles (9,300 km; 5,800 mi). The schooner rig was intended to provide an auxiliary method of propulsion if the ship's engines broke down; [8] by the time Giovanni Bausan entered service in the mid-1880s, marine steam engines had become reliable enough that auxiliary sails were no longer necessary, [10] and hers were later removed. [8]

Armament and armor

Armament was heavy for her size, with the main battery consisting of a pair of 10-inch (254 mm) 30-caliber breech-loading (BL) guns mounted in individual barbettes fore and aft, capable of training up to 30 degrees abaft of the beam. [11] These were Pattern G models manufactured by Elswick Ordnance Company. [12] Six BL 5.9-inch (150 mm), 32-caliber secondary guns were mounted in sponsons, three on a side, which comprised the secondary battery. Close-range defense against torpedo boats was provided by a tertiary battery of four quick-firing (QF) 6-pounder 57 mm (2.24 in) 40-caliber guns and two QF 1-pounder 37 mm (1.5 in) guns. She was also equipped with three 14-inch (356 mm) torpedo tubes, one on each broadside above water and one submerged tube in the bow. [11]

She was fitted with an armored deck that ran from stem to stern. It was 1.5 inches (38 mm) in thickness over the boilers and engines and reduced in thickness to 0.75 inches (19 mm) fore and aft. [5] The ship also had an "armor" belt of cork at her waterline, [9] which was intended to swell through water absorption after being hit. This proved to be unsuccessful as hits would result in the destruction of the cork. Giovanni Bausan's conning tower was protected with armor plating 2 inches (51 mm) thick and the breeches of her main guns were also protected by 2 inches of armor. [11]

Service history

Giovanni Bausan some time before 1913 Cruiser Giovanni Bausan.jpg
Giovanni Bausan some time before 1913

Giovanni Bausan was laid down at the Armstrong Whitworth shipyard in Elswick in England on 21 August 1882. Her completed hull was launched on 15 December 1883. [8] After her commissioning on 9 May 1885, she departed from England on 21 May to join the Squada Permamente (Permanent Squadron), and in 1887–1888 she participated in the conquest of Eritrea, where she acted as the flagship of the Italian Red Sea Squadron. [6] Following the conclusion of the Eritrean campaign, Giovanni Bausan returned to Italy. In 1888, she took part in the annual fleet maneuvers, along with four ironclads, three other protected cruisers, four torpedo cruisers, and numerous smaller vessels. The maneuvers consisted of close-order drills and a simulated attack on and defense of La Spezia. Later that year, the ship was present during a naval review held for the German Kaiser Wilhelm II during a visit to Italy. [13] On 5 July 1889, she collided with the torpedo cruiser Folgore, badly damaging her. [14] Giovanni Bausan thereafter spent much of her time in service overseas, particularly in the Americas. [6] During this service, she made a port visit to New York City in 1892, [15] during which she was the first foreign warship to be repaired at the Brooklyn Navy Yard in 15 years. [16]

In 1896, she took part in the annual summer maneuvers in July as part of the Second Division of the Active Squadron, which also included the ironclads Francesco Morosini and Andrea Doria and the torpedo cruiser Tripoli. [17] In 1897, she became part of the International Squadron, a multinational force made up of ships of the Austro-Hungarian Navy, French Navy, Imperial German Navy, Regia Marina, Imperial Russian Navy, and British Royal Navy that intervened in the 1897–1898 Greek Christian uprising against the Ottoman Empire′s rule in Crete. [18] In 1899, Giovanni Bausan had her 5.9-inch guns replaced by modern QF 6-inch (152 mm) guns. [19]

In late 1902, she was sent to Venezuelan waters during the Venezuelan crisis of 1902–1903, when an international force of British, German, and Italian warships blockaded Venezuela over the country's refusal to pay foreign debts. The Italian contingent also included the protected cruiser Elba and the armored cruiser Carlo Alberto. [20] The following year, she and the protected cruisers Etna and Dogali represented Italy at the international naval review in New York, held at the start of the World's Columbian Exposition in Chicago. The Exposition marked the 400th anniversary of Christopher Columbus's arrival in North America. Contingents from France, Germany, Britain, Spain, and several other nations also participated in the celebration. [21] In 1904, Giovanni Bausan returned to Italy, where she was assigned to the Reserve Division, and two of her 6-inch guns were removed, though she was slated to be replaced by the new armored cruiser Francesco Ferruccio, [22] when she entered service in September 1905. [23]

From 1905, Giovanni Bausan served as a training ship for stokers and mechanics until the outbreak of the Italo-Turkish War in 1912. Returning to active duty as Flagship Cyrenaica, she served in the shore bombardment role until the end of the war, when she was again returned to second-line service as a distilling ship. [6] Fitted with four distillers and capable of producing 200 tons of fresh water every 24 hours, she was operating in this role at the start of the First World War. Because of the pressing need for artillery for service with the army, [24] Giovanni Bausan was partially disarmed in 1915, losing her 10-inch guns and two of the 6-inch pieces. Later in the war, the rest of her armament was removed. [8] She was reassigned for service as a seaplane depot ship at Brindisi. [6] Decommissioned in 1919, [25] she was sold for scrap in March 1920 and broken up soon after. [6] [8]

Notes

  1. ↑ Marshall, p. 268.
  2. ↑ Sondhaus, p. 148.
  3. ↑ Clowes et al., p. 440.
  4. ↑ Bonghi, p. 316.
  5. 1 2 Brook, p. 94.
  6. 1 2 3 4 5 6 7 Brook, p. 97.
  7. ↑ Sondhaus, p. 149.
  8. 1 2 3 4 5 6 Fraccaroli, p. 348.
  9. 1 2 Reed & Simpson, p. 137.
  10. ↑ Woodward, p. 170.
  11. 1 2 3 Brook, p. 96.
  12. ↑ Friedman, p. 67.
  13. ↑ Brassey, p. 453.
  14. ↑ Fraccaroli, p. 347.
  15. ↑ "The Giovanni Bausan: Arrival Of The Italian Man-Of-War In This Port". The New York Times . 2 October 1892. p. 16.
  16. ↑ "Two Cruisers Compared: Differences Between The Giovanni Bausan And The Cincinnati". The New York Times. 12 November 1892. p. 10.
  17. ↑ Barry, p. 133.
  18. ↑ Clowes et al., pp. 444–446.
  19. ↑ Brook, pp. 96–97.
  20. ↑ Robinson, pp. 420–421.
  21. ↑ Neal, pp. 99–100.
  22. ↑ Garbett, p. 1429.
  23. ↑ Fraccaroli, p. 351.
  24. ↑ Moore, p. 220.
  25. ↑ Moore, p. 212.

Related Research Articles

<span class="mw-page-title-main">Protected cruiser</span> Type of naval warship

Protected cruisers, a type of cruising warship of the late 19th century, gained their description because an armored deck offered protection for vital machine-spaces from fragments caused by shells exploding above them. Protected cruisers notably lacked a belt of armour along the sides, in contrast to armored cruisers which carried both deck and belt armour. Protected cruisers were typically lighter in displacement and mounted fewer and/or lighter guns than armored cruisers. By the early 20th-century, with the advent of increasingly lighter yet stronger armour, even smaller vessels could afford some level of both belt and deck armour. In the place of protected cruisers, armored cruisers would evolve into heavy cruisers and light cruisers, the latter especially taking-up many of roles originally envisaged for that of protected cruisers.

Italian ironclad <i>Francesco Morosini</i> Ironclad warship of the Italian Royal Navy

Francesco Morosini was an ironclad battleship built in the 1880s and 1890s for the Italian Regia Marina. The ship, named for Francesco Morosini, the 17th-century Doge of Venice, was the second of three ships in the Ruggiero di Lauria class, along with Ruggiero di Lauria and Andrea Doria. She was armed with a main battery of four 356 mm (14 in) guns, was protected with 451 mm (17.75 in) thick belt armor, and was capable of a top speed of 17 knots.

Italian ironclad <i>Andrea Doria</i> Ironclad warship of the Italian Royal Navy

Andrea Doria was an ironclad battleship built for the Italian Regia Marina in the 1880s and 1890s. Named for the 16th-century Genoese admiral Andrea Doria, she was the third and final ship of the Ruggiero di Lauria class. The ship was armed with a main battery of four 432 mm (17 in) guns, was protected with 451 mm (17.75 in) thick belt armor, and was capable of a top speed of 17 knots.

<i>Etna</i>-class cruiser A series of protected cruisers built in the 1880s for the Royal Italian Navy

The Etna class was a series of protected cruisers that were built in the late 1880s for the Regia Marina. The four ships built were slightly enlarged copies of the Elswick Works' design for the protected cruiser Giovanni Bausan. Etna, the lead ship of the class, was the only ship still in service when World War I began, although she served as a stationary headquarters ship for the Navy Commander-in-Chief in Taranto for the duration of the war. The three later ships all participated in putting down the Boxer Rebellion as part of the Eight-Nation Alliance. The three were struck from the Navy List before 1912, but Etna was not sold for scrap until 1921.

Italian cruiser <i>Piemonte</i> Protected cruiser of the Italian Royal Navy

Piemonte was a unique protected cruiser built for the Italian Regia Marina in the 1880s by the British shipyard Armstrong Whitworth. She was the first major warship armed entirely with quick-firing (QF) guns and she was also the fastest cruiser in the world upon her completion in 1889. Piemonte was frequently deployed overseas, including a lengthy tour in East Asian waters from 1901 to 1904. She saw significant action during the Italo-Turkish War in 1911–1912 in the Red Sea, where she frequently bombarded Ottoman ports. During the Battle of Kunfuda Bay in January 1912, she and two destroyers sank four Ottoman gunboats and forced ashore three more. Piemonte participated in World War I but she saw little action during the conflict. She remained in service until 1920, when she was scrapped.

Italian cruiser <i>Dogali</i> Protected cruiser of the Italian Royal Navy

Dogali was a unique protected cruiser built for the Italian Regia Marina in the 1880s. Notably, she was the first warship equipped with triple-expansion engines. The ship was originally ordered by the Greek Navy and named Salamis, but she was sold to the Regia Marina before she was completed and renamed for the Battle of Dogali. She was armed with a main battery of six 15-centimeter (5.9 in) guns and reached a speed of 19.66 knots on her sea trials, making her one of the fastest cruisers at the time.

Italian cruiser <i>Etna</i> Protected cruiser of the Italian Royal Navy

Etna was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the lead ship of the Etna class, which included three sister ships. Named for Mount Etna on the island of Sicily, the ship was laid down in January 1883, was launched in September 1885, and was completed in December 1887. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots.

Italian cruiser <i>Stromboli</i> Protected cruiser of the Italian Royal Navy

Stromboli was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the second member of the Etna class, which included three sister ships. She was named for the volcanic island of Stromboli, and was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She returned to Italy in 1901 and spent the rest of her career in reserve or as an ammunition ship, apart from a brief stint in active service in 1904. Stromboli was stricken from the naval register in 1907 and sold for scrapping in 1911.

Italian cruiser <i>Vesuvio</i> Protected cruiser of the Italian Royal Navy

Vesuvio was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the third member of the Etna class, which included three sister ships. Named for the volcano Mount Vesuvius, the ship's keel was laid down in July 1883. She was launched in March 1886 and was commissioned into the fleet in March 1888. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She was stricken from the naval register in May 1911 and sold for scrap in 1915.

Italian cruiser <i>Ettore Fieramosca</i> Protected cruiser of the Italian Royal Navy

Ettore Fieramosca was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the fourth and final member of the Etna class, which included three sister ships of slightly smaller dimensions. Named for the condottiero of the same name, she was the only member of her class not named for a volcano. The ship was laid down in December 1885, launched in August 1888, and was commissioned in November 1889. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Urania</i> Torpedo cruiser of the Italian Royal Navy

Urania was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantieri navali Odero shipyard; her keel was laid in February 1889, she was launched in June 1891, and was commissioned in July 1893. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Urania spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was still in service at the outbreak of the Italo-Turkish War in September 1911, but she did not take part in any operations. Instead, she remained in Italian waters and was broken up for scrap in January 1912.

Italian cruiser <i>Aretusa</i> Torpedo cruiser of the Italian Royal Navy

Aretusa was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in June 1889 at the Cantiere navale fratelli Orlando shipyard, she was launched in March 1891 and was commissioned in September 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Aretusa spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. At the start of the Italo-Turkish War in September 1911, she was assigned to the Red Sea Squadron in Italian Eritrea. She bombarded Ottoman positions in the Arabian Peninsula and took part in a blockade of the coast. Worn out by the end of the war in October 1912, Aretusa was sold for scrap that December and broken up.

Italian cruiser <i>Caprera</i> Torpedo cruiser of the Italian Royal Navy

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Folgore</i> Torpedo cruiser of the Italian Royal Navy

Folgore was a torpedo cruiser built for the Italian Regia Marina, the lead ship of the Folgore class. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in September 1886, and was completed in February 1887. The ship spent her first two years in service either conducting training maneuvers with the main Italian fleet or in reserve status. She was badly damaged in a collision with the cruiser Giovanni Bausan in 1889, which reduced her effectiveness and cut her career short. Folgore spent the next eleven years primarily in the reserve, until she was sold for scrap in April 1901 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.