Italian cruiser Etruria

Last updated

Italian cruiser Etruria 1895 IWM Q 22388.jpg
Etruria in 1895
History
Flag of Italy (1861-1946) crowned.svg Italy
NameEtruria
NamesakeRegion of Etruria
Builder Cantiere navale fratelli Orlando , Livorno
Laid down1 April 1889
Launched23 April 1891
FateSunk, 13 August 1918
General characteristics
Class and type Regioni-class protected cruiser
Displacement
Length84.8 m (278 ft 3 in)
Beam12.03 m (39 ft 6 in)
Draft4.87 m (16 ft 0 in)
Installed power
Propulsion
Speed18.3 knots (33.9 km/h; 21.1 mph)
Range2,100  nmi (3,900 km; 2,400 mi) at 10 knots (19 km/h; 12 mph)
Complement213–278
Armament
Armor

Etruria was a protected cruiser of the Italian Regia Marina (Royal Navy) built in the 1891 by the Cantiere navale fratelli Orlando shipyard of Livorno. She was the third of six vessels of the Regioni class, all of which were named for current, or in the case of Etruria, former regions of Italy. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots (33 km/h; 21 mph).

Contents

Etruria spent her early career with the main fleet in the Mediterranean Sea. In the early 1900s, she spent much of her time in North and South American waters; she visited the United States for the Jamestown Exposition and the Hudson–Fulton Celebration in 1907 and 1909. The ship took part in the Italo-Turkish War of 1911–1912, primarily by providing gunfire support to Italian troops in North Africa. Reduced to a training ship by World War I, Etruria was deliberately sunk by the Regia Marina in Livorno to convince Austria-Hungary that its espionage network had not been compromised by double agents.

Design

Plan and profile drawing of the Regioni
class Regioni-class cruiser plan and profile.jpg
Plan and profile drawing of the Regioni class

Etruria was 84.8 meters (278 ft 3 in) long overall, had a beam of 12.03 m (39 ft 6 in) and a draft of 4.87 m (16 ft 0 in). Specific displacement figures have not survived for individual members of the class, but they displaced 2,245 to 2,689 long tons (2,281 to 2,732  t ) normally and 2,411 to 3,110 long tons (2,450 to 3,160 t) at full load. The ships had a ram bow and a flush deck. Each vessel was fitted with a pair of pole masts. She had a crew of between 213 and 278. [1]

Her propulsion system consisted of a pair of horizontal triple-expansion steam engines that drove two screw propellers. Steam was supplied by four cylindrical fire-tube boilers that were vented into two funnels. [1] On her speed trials, she reached a maximum of 18.3 knots (33.9 km/h; 21.1 mph) at 7,018 indicated horsepower (5,233 kW). [2] The ship had a cruising radius of about 2,100 nautical miles (3,900 km; 2,400 mi) at a speed of 10 knots (19 km/h; 12 mph). [1]

Etruria was armed with a main battery of four 15 cm (5.9 in) L/40 guns mounted singly, with two side by side forward and two side by side aft. A secondary battery of six 12 cm (4.7 in) L/40 guns were placed between them, with three on each broadside. Close-range defense against torpedo boats consisted of eight 57 mm (2.2 in) guns two 37 mm (1.5 in) guns, and a pair of machine guns. She was also equipped with two 450 mm (17.7 in) torpedo tubes. Etruria was protected by a 50 mm (2 in) thick deck, and her conning tower had 50 mm thick sides. [1]

Service history

Etruria was laid down at the Cantiere navale fratelli Orlando shipyard in Livorno on 1 April 1889. [1] Shortages of funding slowed the completion Etruria and her sister ships. Tight budgets forced the navy to reduce the pace of construction so that the funds could be used to keep the active fleet in service. [3] As a result, it took two years to complete her hull, which was launched on 23 April 1891. Fitting-out work proceeded even more slowly; she was not ready for commissioning until 11 July 1894. [1] Following her commissioning, Etruria was assigned to the Second Division of the Italian fleet in October 1894, along with the ironclad battleships Francesco Morosini, two cruisers and six torpedo boats. [4] In 1895, she and the other ships were replaced by the ironclads Sardegna and Ruggiero di Lauria and the torpedo cruiser Partenope. [5] On 20 June 1895, Etruria and a fleet that included the battleships Sardegna, Re Umberto, Andrea Doria, and Ruggiero di Lauria, visited Germany for the ceremony of the opening of the Kaiser Wilhelm Canal. Contingents from Britain, France, Russia, Spain, and several other countries joined the celebration. [6]

Etruria
during the Hudson-Fulton Celebration in 1909 Italian cruiser Etruria Hudson 1909 cropped LOC 4a16123v.jpg
Etruria during the Hudson–Fulton Celebration in 1909

Etruria was stationed in the Red Sea to support colonial forces in Italian Eritrea in 1902. [7] In April 1907, Etruria and the armored cruiser Varese crossed the Atlantic to represent Italy during the Jamestown Exposition, the commemoration of the 300th anniversary of the Jamestown colony, the first permanent English settlement in the Americas. In addition to the Austro-Hungarian delegation, the international fleet consisted of warships from Great Britain, Japan, Germany, Austria-Hungary, and several other nations. [8] Etruria returned to the United States in September 1909 for the Hudson–Fulton Celebration in New York City, which also included ships from the German, British, and French fleets, among others, in addition to the hosting US Navy. On this occasion, she was joined by the training cruiser Etna. [9]

Etruria also represented Italy at the commemoration of Peruvian pilot Jorge Chávez on 27 October 1910, who had been killed in a crash attempting to cross the Alps from France to Italy a month before. The French cruiser Montcalm joined Etruria for the event. [10] The ship made another visit to the United States in March 1911, this time in San Francisco. Her visit coincided with the 50th anniversary of the proclamation of the Kingdom of Italy on 17 March; Etruria fired a 21-gun salute in honor of the anniversary, which was returned by the US Navy training facility in the harbor. [11]

On 29 September 1911, Italy declared war on the Ottoman Empire in order to seize Libya. At the time, Etruria was still in American waters, but she was quickly recalled. On 18 October, she joined the escort for a troop convoy headed to Benghazi. The convoy was heavily protected against a possible Ottoman attack: the escort comprised the four Regina Elena-class pre-dreadnought battleships, her sister Liguria and another cruiser, and five destroyers. The Italian fleet bombarded the city the next morning after the Ottoman garrison refused to surrender. During the bombardment, parties from the ships and the infantry from the troopships went ashore. The Italians quickly forced the Ottomans to withdraw into the city by evening. After a short siege, the Ottoman forces withdrew on 29 October, leaving the city to the Italians. [12]

By December, Etruria had been moved to Tobruk, where she provided gunfire support to the Italians defending the city. She was joined there by Etna and twelve torpedo boats. In the meantime, most of the fleet had returned to Italy for refitting. In January 1912, Etruria was moved back to Benghazi. For the next six months she remained here, supporting the garrison against Ottoman counter-attacks. The ship repeatedly shelled the Ottoman camps outside the city. On 15 October, the Ottomans surrendered, ending the war. [13]

Etruria was stationed in Libya as part of the local defense force, which included the old ironclad battleships Lepanto and Enrico Dandolo, along with several smaller vessels. [14] By the outbreak of World War I, the ship had been reduced to a training cruiser. The Italian Navy deliberately blew up Etruria in Livorno on 13 August 1918, ostensibly as an act of sabotage by Austro-Hungarian agents in Italy. The purported agents had in fact been coopted as double agents, and the destruction of Etruria was meant to strengthen Austro-Hungarian confidence in their espionage network. [15]

Notes

  1. 1 2 3 4 5 6 Fraccaroli, p. 349.
  2. Notes on Ships and Torpedo Boats 1896, p. 68.
  3. Notes on Ships and Torpedo Boats 1891, p. 41.
  4. Garbett January 1895, p. 89.
  5. Brassey, p. 134.
  6. Garbett May 1895, pp. 518–519.
  7. Garbett August 1902, p. 1075.
  8. Final Report, p. 59.
  9. Kunz, pp. 317–318.
  10. Lawson, p. 431.
  11. Army and Navy Register, p. 22.
  12. Beehler, pp. 6, 11, 27–29.
  13. Beehler, pp. 47, 50, 81, 84, 95.
  14. Earle, p. 1349.
  15. O'Hara, Dickson, & Worth, p. 187.

Related Research Articles

Italian ironclad <i>Italia</i> Ironclad warship of the Italian Royal Navy

Italia was an Italian ironclad battleship built for the Italian Regia Marina, the lead ship of the Italia class. She and her single sister ship, Lepanto, had lengthy construction times. Italia was laid down in January 1876, launched in September 1880, and completed in October 1885. She was armed with a main battery of four 432 mm (17 in) guns mounted in a central barbette and was capable of a top speed of 17.8 knots. Unusually for ships of that era, Italia had an armored deck rather than the typical belt armor.

Italian ironclad <i>Lepanto</i> Ironclad warship of the Italian Royal Navy

Lepanto was an Italian ironclad battleship built for the Italian Regia Marina, the second and last ship of the Italia class. Lepanto was laid down in November 1876, launched in March 1883, and completed in August 1887. She was armed with a main battery of four 432 mm (17 in) guns mounted in a central barbette and was capable of a top speed of 17.8 knots. Unlike other capital ships of the era, Lepanto had an armored deck rather than the more typical belt armor.

Italian ironclad <i>Ruggiero di Lauria</i> Ironclad warship of the Italian Royal Navy

Ruggiero di Lauria was an ironclad battleship built in the 1880s for the Italian Regia Marina. She was the lead ship of the Ruggiero di Lauria class, which included two other ships, Francesco Morosini and Andrea Doria. Ruggiero di Lauria, named for the medieval Sicilian admiral Ruggiero di Lauria, was armed with a main battery of four 432 mm (17 in) guns, was protected with 451 mm (17.75 in) thick belt armor, and was capable of a top speed of 17 knots.

Regioni-class cruiser Protected cruiser class of the Italian Royal Navy

The Regioni class was a group of six protected cruisers built for the Italian Regia Marina in the late 1880s through the early 1900s. The class comprised Umbria, Lombardia, Etruria, Liguria, Elba, and Puglia, all of which were named for regions of Italy with the exception of Elba, which was named for the island. The class is sometimes referred as the Umbria class, for the first ship to be laid down. The ships, built by four different shipyards, varied slightly in their size, speed, and armament, but all could steam at about 18 knots and their main armament consisted of four 15-centimeter (5.9 in) guns and six 12 cm (4.7 in) guns.

Italian cruiser <i>Agordat</i> Torpedo cruiser of the Italian Royal Navy

Agordat was a torpedo cruiser of the Italian Regia Marina built in the late 1890s. She was the lead ship of the Agordat class, which had one other member, Coatit. The ship, which was armed with twelve 76 mm (3 in) guns and two 450 mm (17.7 in) torpedo tubes, was too slow and short-ranged to be able to scout effectively for the fleet, so her career was limited. She saw action during the Italo-Turkish War in 1911–1912, where she provided gunfire support to Italian troops in North Africa. She assisted in the occupation of Constantinople in the aftermath of World War I, and in 1919 she was reclassified as a gunboat. In January 1923, Agordat was sold for scrapping.

Italian cruiser <i>Coatit</i> Torpedo cruiser of the Italian Royal Navy

Coatit was a torpedo cruiser of the Italian Regia Marina built in the late 1890s. She was the second and final member of the Agordat class. The ship, which was armed with twelve 76 mm (3 in) guns and two 450 mm (17.7 in) torpedo tubes, was too slow and short-ranged to be able to scout effectively for the fleet, so her career was limited. She saw action during the Italo-Turkish War in 1911–1912, where she provided gunfire support to Italian troops in North Africa. She also caused a minor diplomatic incident from an attack on retreating Ottoman soldiers in Anatolia. Coatit was part of an international fleet sent to Constantinople when the city appeared to be at risk of falling to the Bulgarian Army during the First Balkan War. In 1919, she was converted into a minelayer and was sold for scrap in 1920.

Italian cruiser <i>Etna</i> Protected cruiser of the Italian Royal Navy

Etna was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the lead ship of the Etna class, which included three sister ships. Named for Mount Etna on the island of Sicily, the ship was laid down in January 1883, was launched in September 1885, and was completed in December 1887. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Minerva</i> Torpedo cruiser of the Italian Royal Navy

Minerva was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. The second of eight ships, Minerva was built by Gio. Ansaldo & C.; her keel was laid down in February 1889, she was launched in February 1892, and she was commissioned in August that year. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns. Minerva spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was converted into a minelayer in 1909–1910. She did not see significant action during the Italo-Turkish War in 1911 or World War I in 1915–1918, though she was used to lay defensive minefields during the latter conflict. The ship was sold for scrap in 1921.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Aretusa</i> Torpedo cruiser of the Italian Royal Navy

Aretusa was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in June 1889 at the Cantiere navale fratelli Orlando shipyard, she was launched in March 1891 and was commissioned in September 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Aretusa spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. At the start of the Italo-Turkish War in September 1911, she was assigned to the Red Sea Squadron in Italian Eritrea. She bombarded Ottoman positions in the Arabian Peninsula and took part in a blockade of the coast. Worn out by the end of the war in October 1912, Aretusa was sold for scrap that December and broken up.

Italian cruiser <i>Caprera</i> Torpedo cruiser of the Italian Royal Navy

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Folgore</i> Torpedo cruiser of the Italian Royal Navy

Folgore was a torpedo cruiser built for the Italian Regia Marina, the lead ship of the Folgore class. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in September 1886, and was completed in February 1887. The ship spent her first two years in service either conducting training maneuvers with the main Italian fleet or in reserve status. She was badly damaged in a collision with the cruiser Giovanni Bausan in 1889, which reduced her effectiveness and cut her career short. Folgore spent the next eleven years primarily in the reserve, until she was sold for scrap in April 1901 and broken up.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Monzambano</i> Torpedo cruiser of the Italian Royal Navy

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina in the 1880s. The ship was built at the Arsenale di La Spezia, beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References