Italian cruiser Lombardia

Last updated

Italian cruiser Etruria 1895 IWM Q 22388.jpg
Lombardia's sister ship Etruria in 1895
History
Flag of Italy (1861-1946) crowned.svgItaly
NameLombardia
NamesakeRegion of Lombardy
Builder Regio Cantiere di Castellammare di Stabia
Laid down19 November 1889
Launched12 July 1890
Commissioned16 February 1893
FateSold for scrap, 4 July 1920
General characteristics
Class and type Regioni-class protected cruiser
Displacement
Length84.8 meters (278 ft 3 in)
Beam12.03 m (39 ft 6 in)
Draft4.87 m (16 ft 0 in)
Installed power
Propulsion
Speed18.4 knots (34.1 km/h; 21.2 mph)
Range2,100  nmi (3,900 km; 2,400 mi) at 10 knots (19 km/h; 12 mph)
Complement213–278
Armament
Armor

Lombardia was a protected cruiser of the Italian Regia Marina (Royal Navy) built in the 1890s. The ship was the second of six vessels in its class, but was the first to enter service. Named for the region of Lombardy, she was laid down in November 1889, was launched in July 1890, and was completed in February 1893. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots (33 km/h; 21 mph).

Contents

Lombardia served in a variety of roles throughout her career. She was initially assigned as a scout for the main Italian fleet before a stint abroad in South America, where an outbreak of yellow fever killed half of her crew. Another period in the main fleet followed in the late 1890s, and in 1901, the ship was deployed to the China station. In late 1903, she cruised off Italian Somaliland, and in 1906 she was converted to a depot ship for submarines. She served in this role for the remainder of her career, including during the Italo-Turkish War in 1911–1912 and World War I in 1915–1918. Lombardia was eventually sold for scrap in July 1920.

Design

Plan and profile drawing of the Regioni class Regioni-class cruiser plan and profile.jpg
Plan and profile drawing of the Regioni class

Lombardia was 84.8 meters (278 ft 3 in) long overall and had a beam of 12.03 m (39 ft 6 in) and a draft of 4.87 m (16 ft 0 in). Specific displacement figures have not survived for individual members of the class, but they displaced 2,245 to 2,689 long tons (2,281 to 2,732  t ) normally and 2,411 to 3,110 long tons (2,450 to 3,160 t) at full load. The ships had a ram bow and a flush deck. Each vessel was fitted with a pair of pole masts. She had a crew of between 213 and 278. [1]

Her propulsion system consisted of a pair of horizontal triple-expansion steam engines that drove two screw propellers. Steam was supplied by four cylindrical fire-tube boilers that were vented into two funnels. [1] On her speed trials, she reached a maximum of 18.4 knots (34.1 km/h; 21.2 mph) at 6,010 indicated horsepower (4,480 kW). [2] The ship had a cruising radius of about 2,100 nautical miles (3,900 km; 2,400 mi) at a speed of 10 knots (19 km/h; 12 mph). [1]

Lombardia was armed with a main battery of four 15 cm (5.9 in) L/40 guns mounted singly, with two side by side forward and two side by side aft. A secondary battery of six 12 cm (4.7 in) L/40 guns were placed between them, with three on each broadside. Close-range defense against torpedo boats consisted of ten 57 mm (2.24 in) guns and a pair of machine guns. She was also equipped with two 450 mm (17.7 in) torpedo tubes. Lombardia was protected by a 50 mm (2 in) thick deck, and her conning tower had 50 mm thick sides. [1]

Service history

Lombardia was built by the Regio Cantieri di Castellammare di Stabia in the eponymous city; her keel was laid on 19 November 1889. She was launched on 12 July 1890, and after completing fitting-out work, the new cruiser was commissioned into the Italian fleet on 16 February 1893, the first member of her class to enter service. [1] The new ship did not immediately enter active service, however, and in 1894 was still kept in reserve status along with her sisters Umbria and Etruria. [3] Beginning on 14 October that year, the Italian fleet, including Lombardia, assembled in Genoa for a naval review held in honor of King Umberto I at the commissioning of the new ironclad Re Umberto. The festivities lasted three days. [4]

In 1896, Lombardia was in South American waters. An outbreak of yellow fever decimated the ship's crew while she was in Rio de Janeiro; 134 men died as a result of the epidemic. The men were buried in local cemeteries and were eventually re-interred in a large mausoleum in Rio de Janeiro in 1904. [5] After returning to Italy in 1897, the ship was assigned to the cruiser squadron, alongside Etna and Dogali. [6] For the periodic fleet maneuvers during the year, Lombardia was assigned to the First Division of the Reserve Squadron, which was centered on the ironclad battleships Duilio, Ruggiero di Lauria, and Lepanto. [7] She remained in the Reserve Squadron the following year. [8]

Lombardia was deployed to the China station in 1901 to replace her sister Elba. She was joined on the voyage by the armored cruiser Marco Polo, which in turn replaced Vettor Pisani. [9] In September 1902 Lombardia was in Nagasaki, Japan, with the Italian cruiser Piemonte. [10] The following month, she joined an international fleet that took part in the funeral of the Chinese Viceroy of Liangjiang, Liu Kunyi. Kunyi had protected Europeans during the Boxer Uprising in 1900–1901, for which he was lauded in the Western press. [11] On 10 May 1903, Lombardia went to Shanghai and steamed up the Yangtze River. [12] She thereafter departed the China station. Later that year, Lombardia was stationed in Italian Somaliland where she visited Illig, a small town on cliffs about 150 miles (240 km) northeast of Hobyo. A landing party attempted to go to shore to negotiate with a group of raiders who had fortified the town, but they were driven off by rifle fire. Lombardia shelled the town in response, but to no effect. [13] The ship then made a stop in Aden in late November – early December. [14]

In 1906, Lombardia was converted into a depot ship for submarines; this work lasted until 1908. [15] By the outbreak of the Italo-Turkish War in September 1911, she was still serving in this capacity, under the command of Prince Luigi Amedeo, then the Inspector of Torpedo Boats. Lombardia remained in the Adriatic Sea during the war and as a result she did not see action in the conflict. [16] [17] She served in this capacity through World War I until 4 July 1920, when she was sold for scrap and subsequently broken up. [1] [18]

Notes

  1. 1 2 3 4 5 6 Fraccaroli, p. 349.
  2. ↑ Notes on Ships and Torpedo Boats, p. 67.
  3. ↑ Garbett July 1894, p. 777.
  4. ↑ Garbett November 1894, p. 1295.
  5. ↑ Public Health Reports, p. 1999.
  6. ↑ Garbett February 1897, p. 232.
  7. ↑ Garbett June 1897, p. 789.
  8. ↑ Garbett 1898, p. 200.
  9. ↑ Garbett 1901, p. 1136.
  10. ↑ May, p. 84.
  11. ↑ Robinson, p. 448.
  12. ↑ May, p. 104.
  13. ↑ Brassey, p. 61.
  14. ↑ Reeve, pp. 103–105.
  15. ↑ Fraccaroli, p. 350.
  16. ↑ Beehler, p. 9.
  17. ↑ Wilson, p. 268.
  18. ↑ Frothingham, p. 307.

Related Research Articles

Italian corvette <i>Cristoforo Colombo</i> (1892) Screw corvette of the Italian Regia Marina

Cristoforo Colombo was a steel-hulled corvette built in the early 1890s for the Italian Regia Marina. The ship was built as a replacement for an earlier vessel of the same name, based on a nearly identical design. The new ship was intended to serve in Italy's colonial empire in eastern Africa, and was designed to be able to operate at long range, far from home ports, for an extended period of time.

Italian cruiser <i>Umbria</i> Protected cruiser of the Italian Royal Navy

Umbria was a protected cruiser of the Italian Regia Marina built in the 1890s. She was the lead ship of the Regioni class, which included five other vessels. All of the ships were named for current or former regions of Italy. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots. Umbria spent much of her career abroad, including several years in American waters. In service during a period of relative peace, Umbria never saw combat. In 1911, she was sold to Haiti and renamed Consul Gostrück, though she did not serve for very long under the Haitian flag. Her crew was too inexperienced to operate the ship, and she foundered shortly after being transferred to the Haitian Navy.

Regioni-class cruiser Protected cruiser class of the Italian Royal Navy

The Regioni class was a group of six protected cruisers built for the Italian Regia Marina in the late 1880s through the early 1900s. The class comprised Umbria, Lombardia, Etruria, Liguria, Elba, and Puglia, all of which were named for regions of Italy with the exception of Elba, which was named for the island. The class is sometimes referred as the Umbria class, for the first ship to be laid down. The ships, built by four different shipyards, varied slightly in their size, speed, and armament, but all could steam at about 18 knots and their main armament consisted of four 15-centimeter (5.9 in) guns and six 12 cm (4.7 in) guns.

Italian cruiser <i>Etna</i> Protected cruiser of the Italian Royal Navy

Etna was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the lead ship of the Etna class, which included three sister ships. Named for Mount Etna on the island of Sicily, the ship was laid down in January 1883, was launched in September 1885, and was completed in December 1887. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots.

Italian cruiser <i>Stromboli</i> Protected cruiser of the Italian Royal Navy

Stromboli was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the second member of the Etna class, which included three sister ships. She was named for the volcanic island of Stromboli, and was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She returned to Italy in 1901 and spent the rest of her career in reserve or as an ammunition ship, apart from a brief stint in active service in 1904. Stromboli was stricken from the naval register in 1907 and sold for scrapping in 1911.

Italian cruiser <i>Vesuvio</i> Protected cruiser of the Italian Royal Navy

Vesuvio was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the third member of the Etna class, which included three sister ships. Named for the volcano Mount Vesuvius, the ship's keel was laid down in July 1883. She was launched in March 1886 and was commissioned into the fleet in March 1888. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She was stricken from the naval register in May 1911 and sold for scrap in 1915.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Aretusa</i> Torpedo cruiser of the Italian Royal Navy

Aretusa was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in June 1889 at the Cantiere navale fratelli Orlando shipyard, she was launched in March 1891 and was commissioned in September 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Aretusa spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. At the start of the Italo-Turkish War in September 1911, she was assigned to the Red Sea Squadron in Italian Eritrea. She bombarded Ottoman positions in the Arabian Peninsula and took part in a blockade of the coast. Worn out by the end of the war in October 1912, Aretusa was sold for scrap that December and broken up.

Italian cruiser <i>Caprera</i> Torpedo cruiser of the Italian Royal Navy

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Saetta</i> Torpedo cruiser of the Italian Royal Navy

Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina in the 1880s. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in May 1887, and was completed in February 1888. Saetta spent the first decade of her career serving in the main Italian fleet, where she conducted peacetime training exercises. In 1897, she was withdrawn from front-line service and employed as a gunnery training ship, a role she filled for another decade. The Regia Marina ultimately sold Saetta for scrap in May 1908.

Italian cruiser <i>Folgore</i> Torpedo cruiser of the Italian Royal Navy

Folgore was a torpedo cruiser built for the Italian Regia Marina, the lead ship of the Folgore class. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in September 1886, and was completed in February 1887. The ship spent her first two years in service either conducting training maneuvers with the main Italian fleet or in reserve status. She was badly damaged in a collision with the cruiser Giovanni Bausan in 1889, which reduced her effectiveness and cut her career short. Folgore spent the next eleven years primarily in the reserve, until she was sold for scrap in April 1901 and broken up.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Monzambano</i> Torpedo cruiser of the Italian Royal Navy

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina in the 1880s. The ship was built at the Arsenale di La Spezia, beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

Italian cruiser <i>Confienza</i> Torpedo cruiser of the Italian Royal Navy

Confienza was the last of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 17 knots. The ship was built in the late 1880s, with her keel laying in September 1887 at the Arsenale di La Spezia; she was completed in April 1890 and thereafter entered service with the Italian fleet. Confienza had a short and uneventful career; she spent her time in Italian waters and did not see any action. Stricken from the naval register in August 1901, she was thereafter broken up for scrap.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.