Related Research Articles
A streamliner is a vehicle incorporating streamlining in a shape providing reduced air resistance. The term is applied to high-speed railway trainsets of the 1930s to 1950s, and to their successor "bullet trains". Less commonly, the term is applied to fully faired upright and recumbent bicycles. As part of the Streamline Moderne trend, the term was applied to passenger cars, trucks, and other types of light-, medium-, or heavy-duty vehicles, but now vehicle streamlining is so prevalent that it is not an outstanding characteristic. In land speed racing, it is a term applied to the long, slender, custom built, high-speed vehicles with enclosed wheels.
Talgo is a Spanish manufacturer of intercity, standard, and high-speed passenger trains. Talgo is an abbreviation of Tren Articulado Ligero Goicoechea Oriol
The AAR wheel arrangement system is a method of classifying locomotive wheel arrangements that was developed by the Association of American Railroads. Essentially a simplification of the European UIC classification, it is widely used in North America to describe diesel and electric locomotives. It is not used for steam locomotives, which use the Whyte notation instead.
The ALCO RS-3 is a 1,600 hp (1.2 MW), B-B diesel-electric locomotive manufactured from May 1950 to August 1956 by American Locomotive Company (ALCO) and its subsidiary Montreal Locomotive Works (MLW). A total of 1,418 were produced: 1,265 for American railroads, 98 for Canadian railroads, 48 for Brazilian railroads, and seven for Mexican railroads.
The Consolidation Line was a series of diesel-electric railway locomotive designs produced by Fairbanks-Morse and its Canadian licensee, the Canadian Locomotive Company. Railfans have dubbed these locomotives “C-liners”, however F-M referred to the models collectively as the C-Line. A combined total of 165 units were produced by F-M and the CLC between 1950 and 1955.
The H-24-66, or Train Master, was a diesel-electric railroad locomotive produced by Fairbanks-Morse and its licensee, Canadian Locomotive Company. These six-axle hood unit road switchers were deployed in the United States and Canada during the 1950s.
In rail transport, head-end power (HEP), also known as electric train supply (ETS), is the electrical power distribution system on a passenger train. The power source, usually a locomotive at the front or 'head' of a train, provides the electricity used for heating, lighting, electrical and other 'hotel' needs. The maritime equivalent is hotel electric power. A successful attempt by the London, Brighton and South Coast Railway in October 1881 to light the passenger cars on the London to Brighton route heralded the beginning of using electricity to light trains in the world.
The FM H-12-44TS was a light road switcher version of the Fairbanks-Morse H-12-44 yard switcher. Only three of the 1,200-horsepower (890 kW), six-cylinder opposed piston engine locomotives were manufactured especially for the Atchison, Topeka and Santa Fe Railway in May, 1956. The units had an extended frame to accommodate the addition of a short hood behind the cab, and were configured in a B-B wheel arrangement and mounted atop a pair of two-axle AAR Type-A switcher trucks with all axles powered. H-12-44TSs also came equipped with steam generator units as they were acquired solely for shuttling passenger cars in and around the Dearborn Station terminal in Chicago, Illinois.
The FM H-12-44 was a yard switcher produced by Fairbanks-Morse from May 1950 until March 1961. The units had a 1,200-horsepower (890 kW), six-cylinder opposed piston engine prime mover, and were configured in a B-B wheel arrangement mounted atop a pair of two-axle AAR Type-A switcher trucks, with all axles powered and geared for a top speed of 60 miles per hour (97 km/h).
The FM H-16-44 was a diesel-electric locomotive produced by Fairbanks-Morse from April 1950 – February 1963. The locomotive shared an identical platform and carbody with the predecessor Model FM H-15-44, and were equipped with the same eight-cylinder opposed piston engine that had been uprated to 1,600 horsepower (1,200 kW). The H-16-44 was configured in a B-B wheel arrangement, mounted atop a pair of two-axle AAR Type-B road trucks with all axles powered. In late 1950, the AAR trucks were almost exclusively replaced with the same units found on the company's "C-liner" locomotives.
The Erie-built was the first streamlined, cab-equipped dual service diesel locomotive built by Fairbanks-Morse, introduced as direct competition to such models as the ALCO PA and FA and EMD FT. F-M lacked the space and staff to design and manufacture large road locomotives in their own plant at Beloit, Wisconsin, and was concerned that waiting to develop the necessary infrastructure would cause them to miss out on the market opportunity for large road locomotives. Engineering and assembly work was subcontracted out to General Electric, which produced the locomotives at its Erie, Pennsylvania, facility, thereby giving rise to the name "Erie-built."
The P-12-42, also known as the Speed Merchant, was a streamlined, 1,200 hp (890 kW) locomotive built between 1957–1958 by Fairbanks-Morse, specifically to operate on each end of the Talgo train produced by American Car and Foundry. This model represented F-M's attempted entry into the lightweight locomotive market, but only four of the low-slung units were produced: the first pair was purchased by the New York, New Haven and Hartford Railroad for their John Quincy Adams train, while the second pair went to the Boston and Maine Railroad for their Speed Merchant train.
The OP800 was a lightweight, streamlined railcar built by the St. Louis Car Company in 1939. Fairbanks-Morse supplied the 800 hp (600 kW), five-cylinder 8 in × 10 in opposed piston engine prime mover. The units were configured in a highly unusual 2-A1A wheel arrangement (later converted to 3-A1A) mounted atop a pair of road trucks, and equipped with a front swing coupler pilot. The aft section was divided into two separate compartments: one was used to transport baggage and the other served as a small railway post office, or RPO.
The EMD LWT12 was a diesel–electric power car that was built in 1955 by General Motors Electro-Motive Division (EMD), to pull a lightweight passenger trainset. The General Motors Company developed both components under the project name, Train Y, but later marketed them as the Aerotrain. Diesel power was provided by an EMD 567C 12-cylinder engine, which produced 1,200 hp (890 kW). Two other GM Diesel engines provided current for train-heating, lighting and air-conditioning.
The Xplorer, or Ohio Xplorer, was a named train of the New York Central Railroad (NYC) that traveled between Cleveland and Cincinnati, Ohio. Although the railroad first announced the train in its April 29, 1956, timetable, that timetable did not contain its schedule. The train entered revenue service on June 3, 1956.
The RP-210 was a streamlined 1,000 hp (750 kW) locomotive built in 1956 by Baldwin-Lima-Hamilton, specifically to operate with the experimental, all-aluminum Train-X coaches that was built by the Pullman-Standard Car Manufacturing Company. The model represented Baldwin's attempted entry into the lightweight passenger locomotive market, but only three of the low-slung diesel-hydraulic units were produced. The first RP-210 was built for the New York Central Railroad to power their Ohio Xplorer train between Cleveland, Columbus, and Cincinnati, and a pair was purchased by the New York, New Haven and Hartford Railroad to double-end their Dan'l Webster, running between New York City and Boston.
The Roger Williams was a streamlined, six car, lightweight, DMU passenger train, built by the Budd Company in 1956 for the New York, New Haven and Hartford Railroad. The train was based on Budd's successful RDC DMU cars. The end two cars were equipped with streamlined locomotive style cabs and noses, resembling those on the Fairbanks-Morse P-12-42 Diesel locomotives. The four intermediate cars lacked operating controls and cabs.
The Speed Merchant or Talgo Train was a bi-directional five-car train used by the Boston and Maine Railroad in commuter service between 1958 and 1964 on the road's Eastern and Western routes. Power for the train was from two Fairbanks-Morse P-12-42 diesel-electric locomotives, one at each end of the train, connected by multiple-unit control. Fairbanks-Morse referred to the locomotives as "Speed Merchants" in its promotional literature, but the Boston and Maine never used this moniker. B&M timetables simply called it the "Talgo Train" in advance announcements but, once the train entered service, no names were attached in the printed schedules.
The Dan'l Webster was a named train of the New York, New Haven and Hartford Railroad that traveled between Grand Central Terminal, New York, New York, and South Station, Boston, Massachusetts. The Dan'l Webster was an attempt by the New Haven to modernize rail travel and lure people out of their cars.
The Gulf, Mobile and Northern Railroad Rebels were lightweight, streamlined diesel-electric trains built by American Car and Foundry. The first two trains, purchased in 1935, provided service over the roughly 450 miles (720 km) between New Orleans, Louisiana, and Jackson, Tennessee. The third train, purchased in 1937, allowed service to be added between Jackson and Mobile, Alabama. Unlike other earlier diesel streamliners, these trains were not articulated, as their normal operation required adding and removing cars from the consist.
References
- Kirkland, John F. (November 1985). The Diesel Builders Volume 1: Fairbanks-Morse and Lima-Hamilton. Interurban Press. ISBN 0-916374-69-6.
 | This United States train or rolling stock-related article is a stub. You can help Wikipedia by expanding it. |