M-10000

Last updated
M-10000
Union Pacific M10000 at Pullman 1934.jpg
M-10000
M-10000 observation car.jpg
Stock typeGasoline-electric passenger one-directional trainset
Designer Electro-Motive Corporation
Constructed1934
Entered service1934–1941
Scrapped1942
Number built1 trainset (3 cars)
Number scrapped1 trainset
Successor M-10001
Formation1 power cab car (with mail and baggage rooms),

1 trailer car (passenger),

1 trailer tail car (passenger)
Capacity108 (middle car 56 seat coach, end car 52 seat buffet-coach [1]
Operators Union Pacific Railroad
Specifications
Car body constructionaluminum
Train length204 feet 5 inches (62,310 mm)
Car length71 feet 9 inches (21,870 mm) (power car)
58 feet 0 inches (17,680 mm) (intermediate car)
71 feet 0 inches (21,640 mm) (tail car)
Width9 feet 3 inches (2,820 mm)
Height11 feet 11.5 inches (3.645 m)
Maximum speed110 mph (177km/h)
Weight85 tonnes (84 long tons; 94 short tons)
Traction system Gasoline–electric
Prime mover(s) Winton 191A
Engine typeTwo-stroke gasoline
Cylinder count45° V12
Cylinder size191 cubic inches (3,130 cm3)
Traction motors 2
Power output600  hp (447 kW)
TransmissionDC-DC
AAR wheel arrangement B-(2+2)-2
Wheels driven 2
Bogies 1 motor bogie,

2 non-motor Jacobs bogies,

1 non-motor bogie
Multiple working no
Seating open coach, 2+2
Track gauge 1,435 mm (4 ft 8+12 in)

The M-10000 was an early American streamlined passenger trainset that operated for the Union Pacific Railroad from 1934 until 1941. It was the first streamlined passenger train to be delivered in the United States, and the second to enter regular service after the Pioneer Zephyr of the Chicago, Burlington and Quincy Railroad. [2]

Contents

Development

Front view of M-10000 UP M-10000a.jpg
Front view of M-10000

The M-10000 car design built upon the efforts of William Bushnell Stout, an early designer of all-metal airplanes, who adapted fuselage design ideas to the Railplane (not to be confused with the Bennie Railplane ), a lightweight self-propelled railcar built by Pullman-Standard in 1932. The tapered car cross-section, lightweight tubular aluminum space frame construction, and Duralumin skin of the Railplane were carried over into the M-10000 design. [3] The performance of the Railplane in testing drew the attention of Union Pacific, who sought the services of Pullman-Standard in building a small, lightweight streamlined trainset for mainline service. Union Pacific ordered M-10000 from Pullman in May 1933 at a cost of $230,997, following an analysis of passenger traffic that concluded new, more cost effective equipment than heavyweight passenger cars and steam locomotives was required for maintaining profitability, especially on low-traffic routes. [2] [4] The streamlined body was developed from a series of wind tunnel tests that were carried out at the University of Michigan. [5]

The Electro-Motive Corporation (EMC) developed the internal combustion-electric propulsion system powered by a 600 hp spark-ignition engine. As was their practice as a system engineering firm at the time, they contracted manufacture of the components of their systems to primary equipment manufacturers. General Motors' Cleveland subsidiary, the Winton Engine Corporation, provided the prime mover. The air brake compressor, main generator, traction motors and control equipment were manufactured by the General Electric Company. Skepticism that development efforts for diesel engines underway in the early 1930s would provide timely release of an engine adequate for high speed rail service led to use of a spark-ignition distillate engine. [2] Trucks were strongly influenced by German passenger bogie design, as investigated by Union Pacific chief engineer A.H. Fetters.

Design

Rear view of M-10000 UP M-10000b.jpg
Rear view of M-10000

The M-10000 was a three-car trainset, with a combined power/baggage/railway post office car and two trailing passenger coaches. [5] The power car measured 71 feet 9 inches (21.87 m) long, followed by coaches measuring 58 feet (18 m) and 71 feet (22 m). [5] Including the space between cars, the trainset had a total length of 204 feet 5 inches (62.31 m), with a width of 9 feet 3 inches (2.82 m) and a height of 11 feet 11.5 inches (3.645 m) at the cab; the coaches were 1 foot (0.30 m) shorter. [5] The trainset was articulated using shared Jacobs bogies to reduce weight, making the train operate as one integrated unit rather than as a separable locomotive and cars. The integrated-body-and-frame construction using aluminum reduced the required structural weight to a fraction of that for conventional body-on-frame railcars, and the trainset's total weight of 85 tonnes (85,000 kg) was about the same as a single passenger coach of the time. [5]

The power car featured an elevated "turret cab" behind a nose featuring a large vertically-divided air intake grille formed by parabolic arches. On the roof of the cab were a headlamp and a vertical marker light. The train was powered by a single 600 horsepower (450 kW) spark-ignited distillate-burning engine built by the General Motors subsidiary Winton Engine Corporation driving a generator that powered two traction motors on the leading truck of the power car. [4] The two passenger coaches each had a capacity of 60 people; the last coach also included a small galley at the rear end to prepare meals that were served at passengers' seats. [5] Original livery consisted of Armour Yellow sides with a Leaf Brown nose, roof, rear, and lower panels, with red striping separating the two main colors. The nose was subsequently painted Armour Yellow consistent with other early Union Pacific streamliners.

Service history

Postcard photo of the M-10000 as the City of Salina Union Pacific City of Salina.JPG
Postcard photo of the M-10000 as the City of Salina

The trainset was delivered on February 12, 1934, and was sent on a publicity tour across the US, during which about a million people toured it and its stops became local media sensations. [2] During its 13,000-mile (21,000 km) exhibition tour across the US as The Streamliner, where it hit a top speed of 110 mph (177 km/h) during its journey, it visited Washington DC for inspection by Franklin Delano Roosevelt. [4] [6] The popular train was put on display at the 1934 World's Fair ("A Century of Progress") in Chicago from May 26 to October 31, 1934. It was somewhat overshadowed by the other lightweight streamliner, the diesel-powered Burlington Zephyr, which entered the fair after a record-setting "Dawn to Dusk Dash" speed run from Denver to Chicago, in time to arrive at the "Wings of a Century" transportation pageant. During its testing, demonstration, and display periods, the M-10000 trainset included the sleeper car Overland Trail, which was removed from the consist prior to revenue service and added to Union Pacific's next streamliner, M-10001.

M-10000 was placed in revenue service between Kansas City, Missouri and Salina, Kansas as The Streamliner on January 31, 1935. It was subsequently named City of Salina as Union Pacific adopted the "City of..." convention for its new streamliners, but was also nicknamed the "Tin Worm" or "Little Zip". [2] It operated until December 1941, by which time its engine, after powering the train for approximately 995,000 miles, required replacement that was deemed prohibitively expensive. [2] the train was put into storage and has stayed there since 1941

Legacy

Union Pacific commissioned five diesel-powered streamliners during 1934–1936, evolved from the M-10000 design. The color scheme originated with M-10000 was used for UP's later streamliners, and changed incrementally to the Armour Yellow and Harbor Mist Gray livery that became UP's standard. The "Streamliner" name for M-10000 became the general term for locomotives and passenger trains styled with clean lines and an aerodynamic look. The high-mounted, behind-the-nose cab design originated with M-10000 was later adopted for EMC's E-Series and F-Series locomotives, although without the front-mounted air intake. Integrated-body-and-frame, or carbody, designs became standard for rail equipment where weight was a concern, such as early mainline diesel locomotives, passenger cars, urban mass transit rail, and high speed passenger rail.

In the 1937 children's book "Choo Choo: The Story Of An Engine Who Ran Away" by Virginia Lee Burton, an M-10000 is cast as the streamliner train that helps Choo Choo's crew pursue the title engine after she runs away. Once Choo Choo is found on an old unused track, her engineer, Jim, uses a chain to help the streamliner tow Choo Choo back to the big city as the M-10000 lacks couplers.

Related Research Articles

<i>City of Portland</i> (train) Named passenger train in the U.S.

The City of Portland was a named passenger train on the Union Pacific Railroad between Chicago, Illinois, and Portland, Oregon. The first trip left Portland on June 6, 1935, using the streamlined M-10001 trainset. With only one set of equipment, the train left each terminal six times a month. A broken axle derailed the trip that left Chicago on July 23, 1935, and the repaired train resumed service with the trip leaving Portland on February 6, 1936. In May 1936 it started running five times a month instead of six, allowing more time in Chicago between trips.

<span class="mw-page-title-main">Streamliner</span> Vehicle incorporating streamlining in a shape providing reduced air resistance

A streamliner is a vehicle incorporating streamlining in a shape providing reduced air resistance. The term is applied to high-speed railway trainsets of the 1930s to 1950s, and to their successor "bullet trains". Less commonly, the term is applied to fully faired upright and recumbent bicycles. As part of the Streamline Moderne trend, the term was applied to passenger cars, trucks, and other types of light-, medium-, or heavy-duty vehicles, but now vehicle streamlining is so prevalent that it is not an outstanding characteristic. In land speed racing, it is a term applied to the long, slender, custom built, high-speed vehicles with enclosed wheels.

<i>City of Denver</i> (train) Streamlined passenger train of the Union Pacifiic Railroad

The City of Denver was a streamlined passenger train operated by the Union Pacific Railroad between Chicago, Illinois, and Denver, Colorado. It operated between 1936 and 1971. From 1936–1955 the Chicago and North Western Railway handled the train east of Omaha, Nebraska; the Chicago, Milwaukee, St. Paul and Pacific Railroad handled it thereafter. The train was the fastest long-distance train in the United States when it debuted in 1936, covering 1,048 miles (1,687 km) in 16 hours. For almost its entire career its principal competitor was the Chicago, Burlington and Quincy Railroad's Denver Zephyr. When Amtrak assumed operation of most intercity trains in the United States in 1971, it discontinued the City of Denver, preferring to use the Burlington's route between Chicago and Denver.

<i>City of Los Angeles</i> (train)

The City of Los Angeles was a streamlined passenger train between Chicago, Illinois, and Los Angeles, California via Omaha, Nebraska, and Ogden, Utah. Between Omaha and Los Angeles it ran on the Union Pacific Railroad; east of Omaha it ran on the Chicago and North Western Railway until October 1955 and on the Milwaukee Road thereafter. The train had number 103 westbound and number 104 eastbound.

<span class="mw-page-title-main">Illinois Central 121</span> North American trainset

Illinois Central 121 was a diesel streamliner built in 1936 by Pullman-Standard and powered by Electro-Motive Corporation, which was used by the Illinois Central Railroad on the Green Diamond. Its fixed five-car consist was also the end of an era; the popularity of the early streamliners was their undoing, because the trains could not be lengthened or shortened to handle varying loads. It was the last streamliner built with the power car articulated with the train; future streamliners featured a matched but separable locomotive. The train was painted in a two-tone green livery, "Cypress Green" on the nose and below the window sills with "Cedar Green" above, separated by an aluminum strip. Extensive aluminum trim was applied.

<span class="mw-page-title-main">EMC E2</span>

The EMC E2 was an American passenger-train diesel locomotive which as a single unit developed 1,800 horsepower (1,300 kW), from two (2) 900 horsepower (670 kW) prime movers. These locomotives were typically operated as a unit set or ; where the three unit lashup developed 5400 horsepower. This was almost the ideal horsepower required for the tonnage of a 15 - 18 car passenger train, operated over the ruling grades of virtually all of the mileage between major American cities. The units were of the A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation (EMC), later Electro-Motive Diesel (EMD) of La Grange, Illinois.

<span class="mw-page-title-main">EMC TA</span> American diesel-electric locomotive model

The EMC-TA was a model of diesel locomotive produced for the Chicago, Rock Island and Pacific Railroad by the Electro-Motive Corporation in 1937. The original six Rock Island Rockets streamliners were three- or four-car stainless-steel semi-articulated trainsets built by Budd Company, powered by six identical locomotives, #601-606. The locomotives were classified as model TA—the T indicating Twelve hundred hp (890 kW), the A indicating an A unit. The Rock Island Line was EMC's only customer for the TA locomotive model.

<span class="mw-page-title-main">EMC E1</span> Early American diesel-passenger locomotive

The EMC E1 was an early passenger-train diesel locomotive developing 1,800 hp, with an A1A-A1A wheel arrangement, and manufactured by Electro-Motive Corporation of La Grange, Illinois. They were built during 1937 and 1938 for the Atchison, Topeka and Santa Fe Railway for a new generation of diesel-powered streamlined trains. 8 cab-equipped lead A units and three cabless booster B units were built. The initial three locomotives were AB pairs built to haul the Santa Fe's Super Chief diesel streamliners, while the others were built as single A units to haul shorter trains. The locomotives were diesel-electrics with two 900 hp (670 kW) Winton 201-A engines each, with each engine driving its own generator to power the traction motors. The E1 was the second model in a long line of passenger diesels of similar design known as EMD E-units. All Winton 201A-engined Santa Fe passenger units, including the E1s, were extensively rebuilt into the 80-class E8M engines in 1952–53. These were similar to production E8 models, but derated to 2,000 hp so as not to burn out the early traction (axle) motors.

<span class="mw-page-title-main">EMC 1800 hp B-B</span> Locomotive class

Electro-Motive Corporation produced five 1800 hp B-B experimental passenger train-hauling diesel locomotives in 1935; two company-owned demonstrators, #511 and #512, the Baltimore and Ohio Railroad's #50, and two units for the Atchison, Topeka and Santa Fe Railway, Diesel Locomotive #1. The twin engine power unit layout and multiple unit control systems developed with the B-B locomotives were soon adopted for other locomotives such as the Burlington Route's Zephyr locomotives built by the Budd Company in 1936 and EMC's own EMD E-units introduced in 1937. The B-B locomotives worked as proof-of-concept demonstrators for diesel power with the service loads of full size trains, breaking out of its niche powering the smaller custom Streamliners.

<span class="mw-page-title-main">M-10001</span> Streamlined diesel trainset

The Union Pacific Railroad's M-10001 was a diesel-electric streamlined train built in 1934 by Pullman-Standard with a power system developed by General Motors Electro-Motive Corporation using a Winton 201A Diesel engine and General Electric generator, control equipment and traction motors. It was the UP's second streamliner after the M-10000, their first equipped with a diesel engine and was a longer train than its three-car predecessor. All cars were articulated—trucks were shared between each car. It was delivered on October 2, 1934, and was used for display, test and record-setting runs for the next two months before being returned to Pullman-Standard for an increase in power and capacity, following which it was placed into service as the City of Portland train. It has been nicknamed "The Banana".

<span class="mw-page-title-main">M-10002</span> Streamlined diesel trainset

The Union Pacific Railroad's M-10002 was a diesel-electric streamliner train built in 1936 by Pullman-Standard, with prime movers from the Winton Engine division of General Motors Corporation and General Electric generator, control equipment and traction motors. It was the UP's third streamliner, and the last turret-cab streamliner.

<span class="mw-page-title-main">M-10003 to M-10006</span> Streamlined diesel trainset

The Union Pacific Railroad's M-10003, M-10004, M-10005, and M-10006 were four identical streamlined 2-car power car diesel-electric train sets delivered in May, June, and July 1936 from Pullman-Standard, with prime movers from the Winton Engine Corporation of General Motors and General Electric generators, control equipment and traction motors. One was for the City of San Francisco, two were for the City of Denver, and one was a spare set intended for both routes. In 1939, M-10004 was split and converted into additional boosters for the other sets, now renumbered CD-05, CD-06, and CD-07, all running on the City of Denver. The M-10001 power car became the other third booster. In this form, the three power sets ran until they were replaced by E8 locomotives in 1953, at which point they were scrapped.

<i>Pioneer Zephyr</i> American train

The Pioneer Zephyr is a diesel-powered trainset built by the Budd Company in 1934 for the Chicago, Burlington & Quincy Railroad (CB&Q), commonly known as the Burlington Route. The trainset was the second internal combustion-powered streamliner built for mainline service in the United States, the first such train powered by a diesel engine, and the first to enter revenue service.

<span class="mw-page-title-main">Aerotrain (GM)</span> American streamlined trainset (1955–1966)

The Aerotrain was a streamlined trainset that the General Motors (GM) Electro-Motive Division (EMD) introduced in 1955. GM originally designated the light-weight consist as Train-Y before the company adopted the Aerotrain marketing name.

<span class="mw-page-title-main">British Rail Class D16/1</span> Class of diesel electric locomotives

LMS No. 10000 and 10001 were some of the first mainline diesel locomotives built in Great Britain. They were built in association with English Electric by the London, Midland and Scottish Railway at its Derby Works, using an English Electric 1,600 hp diesel engine, generator and electrics.

<i>Lark</i> (train) Historic passenger train service in California

The Lark was an overnight passenger train of the Southern Pacific Company on the 470-mile (760 km) run between San Francisco and Los Angeles. It became a streamliner in 1941 and was discontinued on April 8, 1968. The Lark ran along the same route as the Coast Daylight and was often pulled by a locomotive wearing the famous Daylight paint scheme of orange, red, and black.

<i>Twin Cities Hiawatha</i> Former passenger train from Chicago to Minneapolis–Saint Paul

The Twin Cities Hiawatha, often just Hiawatha, was a named passenger train operated by the Chicago, Milwaukee, St. Paul and Pacific Railroad, and traveled from Chicago to the Twin Cities. The original train takes its name from the epic poem The Song of Hiawatha by Henry Wadsworth Longfellow. There are a number of Hiawatha-themed names within the city of Minneapolis, the terminus of the original train. The first Hiawatha ran in 1935; in 1939 the Milwaukee Road introduced a second daily trip between Chicago and Minneapolis. The two trains were known as the Morning Hiawatha and Afternoon Hiawatha, or sometimes the AM Twin Cities Hiawatha and PM Twin Cities Hiawatha. The Milwaukee Road discontinued the Afternoon Hiawatha in 1970 while the Morning Hiawatha continued running until the formation of Amtrak in 1971.

<i>Roger Williams</i> (train)

The Roger Williams was a six-car streamlined lightweight DMU passenger train built by the Budd Company in 1956 for the New York, New Haven and Hartford Railroad. The train was based on Budd's successful RDC DMU cars. The end two cars were equipped with streamlined locomotive style cabs and noses, resembling those on the Fairbanks-Morse P-12-42 Diesel locomotives. The four intermediate cars lacked operating controls and cabs.

The streamliner cars are a class of streamlined passenger railroad cars built from the 1930s through the 1960s for long distance passenger train services in North America.

<span class="mw-page-title-main">GE steam turbine locomotives</span> Steam turbine locomotives

The General Electric steam turbine locomotives were two steam turbine locomotives built by General Electric (GE) for Union Pacific (UP) in 1938. The two units were streamlined, 90 feet 10 inches (27.69 m) in length, capable of producing 2,500 horsepower (1,900 kW), and reputedly able to attain speeds of 125 miles per hour (201 km/h). Stylistically, they resembled UP's Pullman-designed M-10003 through M-10006 power units and contemporary Electro-Motive Corporation (EMC) diesel designs.

References

Footnotes

  1. https://utahrails.net/pass/streamliner-1st-train.php
  2. 1 2 3 4 5 6 Wegman, p. 44-45
  3. Solomon, Brian (2015) (5 October 2015). Streamliners: Locomotives and Trains in the Age of Speed and Style, p. 32-37. Voyageur Press. ISBN   978-0760347478.{{cite book}}: CS1 maint: numeric names: authors list (link)
  4. 1 2 3 "Radical high-speed trains briefly brightened the Depression". The Baltimore Sun. March 8, 2009. Retrieved December 27, 2018.
  5. 1 2 3 4 5 6 Wegman, p.48-49
  6. "Union Pacific Streamliners M-10000 and M-10001 in 1934". YouTube . Archived from the original on 2021-12-05.

Bibliography