| M-103 | |
|---|---|
 | |
| Klimov M-103 on display at the Polish Aviation Museum | |
| Type | V12 inline engine |
| Manufacturer | Klimov |
| First run | October 1936 |
| Number built | 11,681 |
| Developed from | Klimov M-100 |
| Developed into | Klimov M-105 |
The Klimov M-103 is a V12 liquid-cooled piston aircraft engine used by Soviet aircraft during World War II. [1]
The M-103 was a further development of the Klimov M-100 engine that was itself a licensed copy of the French Hispano-Suiza 12Ybrs. It differed from both engines in a number of aspects such as increased compression ratio, increased supercharger ratio, increased rpm's, strengthened cylinder blocks, a new crankshaft, a more aggressive camshaft, and flat bottomed cylinders. Developed in 1936 it was ready for testing in October 1936. The first two models failed testing due to cracked cylinder blocks and the engine was resubmitted for testing in 1937. After passing its trials it was cleared for production in 1938 and 11,681 were produced until 1942 at its factory in Rybinsk. The M-103 was followed by the M-105.
Data from [2]
Related development
Related lists
The Hispano-Suiza 12Y was an aircraft engine produced by Hispano-Suiza for the French Air Force before the Second World War. The 12Y became the primary French 1,000 hp (750 kW) class engine and was used in a number of famous aircraft, including the Morane-Saulnier M.S.406 and Dewoitine D.520.
The 12Z, designated Type 89 by the company, was the final production evolution of the series of Hispano-Suiza V-12 aircraft engines. The Z model was in the middle of development when France fell to the Germans during World War II. A small number were produced before and during the war but following the occupation of Vichy France, the German occupation government did not allow full-scale production to start. After the war development would resume and small numbers were built to equip new designs, but the rapid introduction of the jet engine ended further development.
The Daimler-Benz DB 601 was a German aircraft engine built during World War II. It was a liquid-cooled inverted V12, and powered the Messerschmitt Bf 109, Messerschmitt Bf 110, and many others. Approximately 19,000 601's were produced before it was replaced by the improved Daimler-Benz DB 605 in 1942.
The Wright R-1820 Cyclone 9 is an American radial engine developed by Curtiss-Wright, widely used on aircraft in the 1930s through 1950s. It was produced under license in France as the Hispano-Suiza 9V or Hispano-Wright 9V, and in the Soviet Union as the Shvetsov M-25.
The Hispano-Suiza 8 is a water-cooled V8 SOHC aero engine introduced by Hispano-Suiza in 1914 that went on to become the most commonly used liquid-cooled engine in the aircraft of the Entente Powers during the First World War. The original Hispano-Suiza 8A was rated at 140 hp (100 kW) and the later, larger displacement Hispano-Suiza 8F reached 330 hp (250 kW).
The Daimler-Benz DB 600 was a German aircraft engine designed and built before World War II as part of a new generation of German engine technology. It was a liquid-cooled inverted V12 engine, and powered the Messerschmitt Bf 110 and Heinkel He 111 among others.
The Shvetsov ASh-82 (M-82) is a Soviet 14-cylinder, two-row, air-cooled radial aircraft engine developed from the Shvetsov M-62. The M-62 was the result of development of the M-25, which was a licensed version of the Wright R-1820 Cyclone.
The Daimler-Benz DB 603 was a German aircraft engine used during World War II. It was a liquid-cooled 12-cylinder inverted V12 enlargement of the 33.9 Liter DB 601, which was in itself a development of the DB 600. Production of the DB 603 commenced in May 1942, and with a 44.5 liter displacement figure, was the largest displacement inverted V12 aviation engine to be produced and used in front line aircraft of the Third Reich during World War II.
The JSC Klimov manufactures internationally certified gas turbine engines, main gearboxes and accessory drive gearboxes for transport aircraft.
The Klimov M-105 was a V12 liquid-cooled piston aircraft engine used by Soviet aircraft during World War II.
The Klimov VK-106 was an experimental liquid-cooled V12 piston aircraft engine intended for Soviet aircraft during World War II.
The Klimov VK-107 was a V-12 liquid-cooled piston aircraft engine used by Soviet aircraft during World War II.
The Curtiss V-1570 Conqueror was a V12 liquid-cooled aircraft engine. Representing a more powerful version of the Curtiss D-12, the engine entered production in 1926 and flew in numerous aircraft.
The Vedeneyev M14P is a Russian nine-cylinder, four-stroke, air-cooled, petrol-powered radial engine. Producing 360 hp (268 kW), its design dates from the 1940s, and is itself a development of the Ivchenko AI-14 engine. The engine has been used extensively by the Yakovlev and Sukhoi Design Bureaus. The M14P is also used in some experimental aircraft and kit designs such as the Murphy Moose, Radial Rocket, Pitts Model 12, and others.
The Hispano-Suiza 14AB, a.k.a. Hispano-Suiza Type 80, was a 14-cylinder twin-row air-cooled radial engine. In 1929 the Hispano-Suiza company bought a license to produce the Wright Whirlwind engine. The technology from that engine was used to produce a number of different radial engines with greater displacements, power, and number of cylinders.
The Shvetsov ASh-21 is a seven-cylinder single-row air-cooled radial aero engine.
The Hispano-Suiza 12X was an aircraft piston engine designed in France by Hispano-Suiza during the early 1930s. A 12-cylinder Vee, liquid-cooled design, the 12X was used on several aircraft types, some of them being used in limited numbers during World War II. Due to the 12X's limited power output, its derivative the more powerful Hispano-Suiza 12Y had a longer career.
The Kawasaki Ha40, also known as the Army Type 2 1,100 hp Liquid Cooled In-line and Ha-60, was a license-built Daimler-Benz DB 601Aa 12-cylinder liquid-cooled inverted-vee aircraft engine. The Imperial Japanese Army Air Service (IJAAS) selected the engine to power its Kawasaki Ki-61 fighter.
The Hispano-Suiza 12N was one of two new V-12 engine designs first run in 1928 and was manufactured by Hispano-Suiza's French subsidiary for the Armée de l’Air. It produced about 485 kW (650 hp), was the first to use gas nitride hardening and introduced wet cylinder liners into Hispano-Suiza's aircraft engine range. It powered the first non-stop flight from Europe to the United States.
Hispano-Suiza piston aero-engines were predominantly piston engines produced by Hispano-Suiza in France, Spain, and under licence in the United Kingdom, the United States and Russia from the First World War through to the 1950s. Development of these engines started with the very successful V-8 engines which introduced many new features which ensured the success of the Hispano-Suiza line.
