La Brugeoise cars (Buenos Aires Underground)

La Brugeoise cars
La Brugeoise cars
	La Brugeoise train at Plaza de Mayo station.
In service	1913 – 2013
Manufacturer	La Brugeoise, et Nicaise, et Delcuve
Built at	Bruges, Belgium
Constructed	1911–1919, 1944
Refurbished	1927
Number built	125 cars
Number in service	100 cars
Number preserved	1 car (number 10)
Number scrapped	21 cars (By 2012)
Formation	Maximum 6 cars per trainset (limited by platform length)
Capacity	42 sitting + 120 standing
Operators	Metrovías
Depots	Polvorín workshop
Lines served	Line A
Specifications
Car body construction	Wood
Car length	15,800 mm (51 ft 10 in)
Width	2,600 mm (8 ft 6 in)
Height	3,380 mm (11 ft 1 in)
Doors	3 pairs per side
Maximum speed	50 km/h (31 mph)
Weight	27 tonnes (27 long tons; 30 short tons) per car
Traction motors	Two "U 109" (one per bogie)
Power output	115 hp (86 kW)
Electric system(s)	550/1,100 V DC Overhead
Current collector(s)	one double-arm pantograph per car
Bogies	Two per car
Braking system(s)	Air brakes (regular and emergency purposes); manual mechanical brakes (emergency only)
Safety system(s)	Mechanical ATS; overhead lever (one per cab)
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge

Last updated June 15, 2024

La Brugeoise cars were Buenos Aires Underground (Subte) Line A rolling stock since its inauguration in 1913 till 2013 when replaced by new Chinese stock. They were built by the Belgian railway rolling stock manufacturer La Brugeoise et Nivelles between 1911 and 1919 for the Anglo-Argentine Tramways Company's (Compañía de Tranvías Anglo-Argentina (CTAA) in Spanish) first underground line. They were originally designed to run both as metro and tramway cars, but they were refurbished in 1927 for underground use only. They became the oldest underground rolling stock in commercial service in the world ^[1] as well as a tourist attraction and part of Buenos Aires cultural heritage.

Technical information

Some cars were refurbished, such as this El Lagarto model used temporarily on the Premetro. Lagarto-2-1.jpg — Some cars were refurbished, such as this *El Lagarto* model used temporarily on the Premetro.

The La Brugeoise trains were designed to run using either 550 VDC (as surface tramways did until the system was closed in 1962) or 1,100 VDC in the tunnels. Traction was controlled through a 9-power run (originally 11-power run) handle, known as the "controller". The motorman would spin the handle anticlockwise to increase acceleration. Its loose end was fitted with the dead man's switch, a button-shaped mechanism that allowed the motorman to either enable or cut current flow to the motors in normal conditions. This system was also meant to serve as an emergency train stop, that is, if anything should prevent the motorman from keeping this button pressed, the train would automatically stop accelerating.^[2]

In normal driving conditions, braking was entirely achieved by means of a traditional air brake system. Because of their long life-span, La Brugeoise trains used custom-made brake shoes made of hard wood embedded with creosote for additional resistance. Friction between the steel wheels and the brake shoes released a peculiar fragrance that Line A became known for among porteños (as Buenos Aires inhabitants call themselves) and tourists. The emergency brakes operation was entirely mechanical. The motorman applied these brakes by spinning a wheel located on the right-hand side of the driving cab, tensing up a chain connected to the brake mechanism. If emergency brakes were engaged for more than 10 seconds, current flow to the traction motors and the auxiliary equipment was interrupted by the main fuse.^[3]

The trains were equipped with mechanical ATS at the CTAA's workshops. Initially, train traffic on Line A was controlled using manually operated signalling. In the mid-1920s this system was automated by Siemens, including the installation of mechanical ATS and traffic lights. Each train was fitted with two levers called anthennas on top of each driving cab, which was lowered by train stops fixed to the tunnel's wall in case a train passed by a red light, thus applying the brakes and cutting off traction current flow. By 2010, train stops were automatically controlled by digital signal system ATP ( Automatic Train Protection ) developed and installed by Alstom.

History

La Brugeoise trains were the first electric multiple units (EMU) to run in Argentina. Commissioned by the Anglo-Argentine Tramways Company Ltd for their first underground line, they were designed to run either on the surface as regular tramways or as underground rail cars. Thanks to a ramp built after Primera Junta station, Line A's terminus from 1914 to 2008, two cars were decoupled from arriving trains and continued service as tramways until the intersection of avenida Rivadavia and avenida Lacarra. Thus, each car had a tramway-like platform on both ends used by passengers to board and leave the train when on the surface. When running in the tunnels, passengers entered or exited the car by using the pair of sliding doors on each side of the car body.

The CTAA bought 115 cars, all with the same technical characteristics but with two different car body layouts (or "series"). The first series cars numbered 5 to 50, together with four English Electric luxury cars (numbered 1 to 4 and forming a special train), began service on 1 December 1913.

First series (5 to 50)

The first series arrived in Buenos Aires by mid-1913, in time to run preliminary tests. They had six wide windows per side with rolling curtains to protect passengers from sunlight when running on surface. The interior was entirely made of finely carved wood, lit with 38 solid bronze globes using incandescent light bulbs.

Their seats, each with the capacity for two passengers, were upholstered in scarlet leather and arranged in two groups of two seats facing each other. On both sides of each sliding door, a seat was placed longitudinally to allow extra room for standing passengers to travel comfortably.

Second series (51 to 120)

The second series arrived in Buenos Aires in two separate groups. Those numbered from 51 to 84 arrived by mid-December 1913, when the line was already operating. The remaining cars, numbered 85 to 120, arrived in 1919 after the end of the First World War.

The second series cars had the same decoration, number and distribution of seats and lights as those of the first series, but they also had some easily recognisable differences. For instance, the second series cars had their tramway-like platform roof at the same level as the salon roof. They also had two smaller windows at the end of the salon instead of the wider ones seen in the first series. This shape and size of windows was later adopted as a model to reform all of the wide windows due to serious structure torsion and stress caused by the tunnel's sharp curves.

Refurbishing

After a few years in service, the CTAA began refurbishing the cars after some problems were detected during service. As mentioned above, the windows were gradually narrowed and, after 1923, one pantograph was removed from each car.

On 31 December 1926, the CTAA cancelled the mixed "tramway-metro" service as growing surface traffic caused delays to trains travelling through Rivadavia avenue. Thus, a major reform was decided: 116 units lost their tramway-style platforms, which were replaced by the curved fronts. Also, a third sliding door was added and the seats scarlet-leather upholstery was replaced with wooden bars. Later, minor changes took place. The windows next to the doors were given blinds, with mirrors taking their place on the inside. Also, most cars lost their air intakes except for car 81, which kept them on its sides.

Modernisation

From 1921, several attempts were made to modernise the cars, so prototypes were built using working and scrapped units. Some of them, such as units 90 and 121, were imitations of the Siemens-Schuckert Orenstein & Koppel cars running in lines C, D and E while others were entirely new designs. Units 124 and 125 were newly manufactured at the Polvorín workshop in 1944 to enhance Subte services during World War II as a lack of imported spare parts for tramways and buses left most of the surface transport out of order.

In 1987, fifteen cars were taken to EMEPA, a workshop established in the city of Chascomús (Buenos Aires province) which specialised in rolling stock overhauls, where a new car body made of metal was built upon the original 1913 chassis and mechanics. These cars were in service up to the day the cars retired.

Maintenance

As spare parts for these trains were no longer available, parts had to be custom-made by request at the Polvorín workshop, where La Brugeoise trains and other Buenos Aires Underground rolling stock were repaired by highly skilled and qualified personnel. According to Metrovías, Buenos Aires Underground private operator, every 20 days cars underwent a routine check-up, while every four years the cars underwent heavy maintenance. Despite their 100 years of uninterrupted service, La Brugeoise trains had one of the lowest mechanical failure averages in the network: 19 every 100,000 km.^[4]

Transport authorities replaced the cars with new rolling stock as soon as Line A reaches its new terminus, San Pedrito station. Nevertheless, financial problems affecting the network's expansion from late 2008 made it possible for these trains to reach nearly a century in service. The Buenos Aires City Legislature passed a law^[5] indicating that two trains should be restored and preserved in operational condition. They were formed by cars 24 - 107 - 121 - 124 - 125 and 100 - 86 - 22 - 89 - 48. It also ordered that cars 27, 81 and 114 be preserved due to certain unique details in their decoration and structure that distinguished them from the rest. In January 2010, national transport authorities announced that an agreement for the provision of 279 cars had been reached with Chinese rolling stock manufacturer CITIC. Forty-five of these cars were to be operational by late 2011 on Line A, thus gradually replacing the La Brugeoise units. However, the cars were not retired until January 12, 2013, when local authorities suspended service on line A in order to finally replace the aging cars with new Chinese-made 200 series cars. The upgrade was completed in two months.

After retirement, certain units were used as decoration in parks. Others were kept as museum pieces, but the majority went to the Polvorín workshop.

Heritage service

After the sanction of law 4886, it was determined that some of the preserved cars would be used in a heritage service, which was finally implemented in September 2017.^[6]^[7]

Related Research Articles

The Buenos Aires Underground, locally known as Subte, is a rapid transit system that serves the area of the city of Buenos Aires, Argentina. The first section of this network opened in 1913, making it the 13th earliest subway network in the world and the first underground railway in Latin America, the Southern Hemisphere, and the Spanish-speaking world, with the Madrid Metro opening nearly six years later, in 1919. As of 2023, Buenos Aires is the only Argentine city with a metro system.

Line A is the oldest line of the Buenos Aires Underground. Opened to the public on 1 December 1913, it was the first underground line in South America, the Southern Hemisphere and the Spanish-speaking world. It made Buenos Aires the 13th city in the world to have an underground transport service. The line stretches 9.8 km (6.1 mi) from Plaza de Mayo and San Pedrito and runs under the full length of the Avenida de Mayo and part of the Avenida Rivadavia, and is used by 258,000 people per day.

Line B of the Buenos Aires Underground runs 11.75 kilometres (7.30 mi) from Leandro N. Alem to Juan Manuel de Rosas in Villa Urquiza. Line B opened to the public on 17 October 1930.

Line C of the Buenos Aires Underground, that runs from Retiro to Constitución terminus, opened on 9 November 1934, and it has a length of 4.3 km (2.7 mi). It runs under Lima Sur, Bernardo de Irigoyen, Carlos Pellegrini, Esmeralda, la Plaza San Martín and Avenida Ramos Mejia streets. It not only connects to every other line on the system, but its termini at Retiro and Constitución also connect it to some of the most important commuter rail networks in Buenos Aires, such as the Mitre and Roca lines and also long-distance passenger services. It is thus an important artery in Buenos Aires' transport system. At the same time, it is also the shortest line in both terms of length and number of stations.

Line H is a line of the Buenos Aires Underground. The first phase, between Plaza Once and Caseros, which opened on 18 October 2007, currently stretches over 8.8 km between Hospitales and Facultad de Derecho stations. It is the first entirely new line built in Buenos Aires since the opening of Line E on 20 June 1944.

Line E of the Buenos Aires Underground runs from Retiro to Plaza de los Virreyes, a total distance of 12 km. Opened in 1944, the Line E was the last completely new line to be added to the Buenos Aires Underground, until 2007 when Line H was opened. The line has a history of being re-routed and extended due to having been historically the line with the lowest passenger numbers on the network.

Caballito is a barrio (neighborhood) of the Argentine capital, Buenos Aires. It is the only barrio in the administrative division Comuna 6.

The Premetro is a 7.4-kilometer long (4.6 mi) light rail line that runs along the outskirts of Buenos Aires, connecting with the Buenos Aires Underground line E, at Plaza de los Virreyes station and then to General Savio, with a short branch to Centro Cívico. It opened in 1987 and is operated by Metrovías. Originally, the Premetro was to include many more lines, but shortly after the privatisation of the railways the projects were postponed and never materialised and only "Premetro E2" was built.

Emepa Group S.A. is an Argentine manufacturer of railway vehicles and owner of Ferrovías, with headquarters located in the city of Buenos Aires. It had formerly owned Ferrocentral, which ran services from Buenos Aires to Córdoba and San Miguel de Tucumán on the Mitre Network, however the state-owned company SOFSE took over these services in 2014 and the subsidiary now remains inactive.

The first trams in Buenos Aires began operating in 1863 in what quickly became a vast network of tramways with the city being known as the "City of Trams" for having the highest tramway-to-population ratio in the world. In the 1920s, Buenos Aires had 875 km (544 mi) of tramways and 99 tram lines using 3000 carriages running throughout the city. By 1963, the vast majority of the network began to be dismantled, though some minor tram services continue in the city today.

The Polvorín Workshop is a rolling stock storage and maintenance workshop in Buenos Aires that primarily serves Line A of the Buenos Aires Underground. It also serves as the main storage and restoration area for the Association of Friends of the Tramway (AAT), who run a heritage tramway in the neighborhood of Caballito, near to where the workshop is located.

<span class="mw-page-title-main">UEC Preston</span> Tram in Buenos Aires, Argentina

The UEC Preston is a tram/subway car built by the British manufacturer United Electric Car Company for the Anglo-Argentine Tramways Company (AATC) in 1912 for use on its then newly built underground tramway in Buenos Aires, which was later to become Line A of the Buenos Aires Underground. Only 4 trams were built and they served on the line up until their retirement in 1977.

The Fiat-Materfer Buenos Aires Underground rolling stock was built by the Argentine company Materfer - then a subsidiary of Fiat Ferroviaria - beginning in 1980 and continuing on through that decade. It was originally conceived to standardise the diverse rolling stock of the Buenos Aires Underground with the use of one model throughout all the lines. However, with the economic and political turmoil faced in the country during and following the collapse of the National Reorganisation Process junta in 1983, its production ended up being far more limited. During the 2010s, the cars were used as temporary stock for two lines, being phased out as newer models arrived from overseas.

The 200 Series is a set of underground cars manufactured by China CNR Corporation and CITIC Construction for use on Line A of the Buenos Aires Underground in Argentina. The cars replace the 100-year-old La Brugeoise cars which operated on the line up until 2013. The Buenos Aires Underground ordered 45 of these units, followed by a further 105 which have been put into service on the line.

The CSR EMU is a series of electric multiple unit cars manufactured by CSR Corporation Limited for use on Buenos Aires' commuter rail network. As of 2015, the trains operated on three of the city's lines and 705 cars were manufactured, with each line using a different number of cars per train. They were created for use on lines electrified using both third rail and overhead lines.

The Siemens-Schuckert Orenstein & Koppel is an underground car formerly used on the Buenos Aires Underground first built by Siemens-Schuckert and Orenstein & Koppel in 1934, 1937 and 1944 with a smaller number of cars built in Argentina during the 1950s. The Siemens O&K rolling stock made up the entirety of the trains used on the three lines built by the Hispanic-Argentine Company for Public Works and Finances (CHADOPyF) and has since served on every line of the Underground from 1934 to 2016, with cars refurbished by the Emepa Group and Alstom continued to function on the network till 2017.

The Buenos Aires Underground has one of the most diverse metro fleets in the world, and has had some of the oldest models in operation on any network. The network began with a relatively standardised fleet, but throughout its over 100-year-long history, it has seen numerous purchases which have created cases where some lines operate numerous models. Recently there have been increased efforts to modernise and standardise the fleets, with large purchases from China CNR Corporation and Alstom.

The Anglo-Argentine Tramways Company, known simply as La Anglo in Argentina, was a large transportation company which operated the majority of the trams in the Buenos Aires network, which was also one of the largest in the world at the time having lines totalling 875 km (544 mi) in length. The company also created Buenos Aires' first underground tram line, which would go on to become Line A of the Buenos Aires Underground. The company also owned other tramways around the country.

The 100 Series are a series of underground railway cars manufactured by Alstom in Brazil and Argentina for use on the Buenos Aires Underground. They are used on Line D of the network, where they make up the vast majority of the fleet, serving alongside some 300 Series and Fiat-Materfer cars. Since 2019, some units have also been used on the Line E.

<span class="mw-page-title-main">Buenos Aires Underground 300 Series</span> Railcars used on the Buenos Aires Underground

The 300 Series are a set of underground cars manufactured by Alstom in Brazil for use on the Buenos Aires Underground. They are used on Line H of the network, and more have been introduced on Line D where they operate alongside the similar 100 Series.

References

↑ "La línea A avanza hasta los años ochenta". enelSubte (in Spanish). 30 November 2001.
↑ Scartaccini, Alejandro. "Los coches de la línea A del subterráneo porteño" (in Spanish)."Information and photografs herein reproduced thanks to the author's kind permission"
↑ Ciarleglio, Gonzalo (28 August 2009). "El taller Polvorín, centro de la historia del Subte". enelSubte (in Spanish). Archived from the original on 21 January 2010.
↑ Dema, Verónica (21 January 2009). "Puesta a punto de los históricos vagones de la línea A". La Nación (in Spanish).
↑ "Anexo de la Ley 2796" (in Spanish). Archived from the original on 4 June 2011.
↑ GCBA (5 September 2017). "Conocé cómo fue el paseo histórico en los coches belgas en la Línea A" (in Spanish). Retrieved 6 September 2017.
↑ "Y un día volvieron las Brujas". enElSubte (in Spanish). 4 September 2017. Retrieved 6 September 2017.

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "La línea A avanza hasta los años ochenta". enelSubte (in Spanish). 30 November 2001.

[2] Scartaccini, Alejandro. "Los coches de la línea A del subterráneo porteño" (in Spanish)."Information and photografs herein reproduced thanks to the author's kind permission"

[3] Ciarleglio, Gonzalo (28 August 2009). "El taller Polvorín, centro de la historia del Subte". enelSubte (in Spanish). Archived from the original on 21 January 2010.

[4] Dema, Verónica (21 January 2009). "Puesta a punto de los históricos vagones de la línea A". La Nación (in Spanish).

[5] "Anexo de la Ley 2796" (in Spanish). Archived from the original on 4 June 2011.

[6] GCBA (5 September 2017). "Conocé cómo fue el paseo histórico en los coches belgas en la Línea A" (in Spanish). Retrieved 6 September 2017.

[7] "Y un día volvieron las Brujas". enElSubte (in Spanish). 4 September 2017. Retrieved 6 September 2017.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

v t e Buenos Aires Underground rolling stock
Present	100 Series 200 Series 300 Series Eidan 500 CAF 5000 CAF 6000 Fiat-Materfer Nagoya 5000 Siemens-Emepa-Alstom
Past	Fabricaciones Militares La Brugeoise Metropolitan Cammell Osgood-Bradley Siemens-Schuckert Orenstein & Koppel UEC Preston
Argentinaportal