Machine fly

Last updated

A machine fly, alternatively called a seated lever fly or "pec deck" fly is a strength training exercise based on the free weight chest fly. As with the chest fly, the hand and arm move through an arc while the elbow is kept at a constant angle. Flyes are used to work the muscles of the upper body, primarily the sternal head of the pectoralis major. Because these exercises use the arms as levers at their longest possible length, the amount of weight that can be moved is significantly less than equivalent press exercises for the same muscles (the military press and bench press for the shoulder and chest respectively). Denie Walter is credited with calling it the Peck Dec back in the 1970s.[ citation needed ]

Equipment

There are two designs of weight training machines available for this exercise. The seated lever fly machine, and the Pec Dec. The seated lever fly involves grasping two handles at shoulder height, and pushing them together while keeping the elbows at a constant angle. [1] When using the Pec Dec machine the hands grip two handles at head height, while the forearms push against two pads at chest height. [2] The anterior deltoids are used as synergists in both variations. The biceps brachii act as a synergist in the seated lever exercise, but not on the Pec Dec due to the raised arm position.

In some machines, the seated lever can be adjusted to perform a rear delt fly exercise.

Related Research Articles

<span class="mw-page-title-main">Calisthenics</span> Form of strength training exercises

Calisthenics or callisthenics (/ˌkælɪsˈθɛnɪks/) is a form of strength training consisting of a variety of movements that exercise large muscle groups, such as standing, grasping, pushing, etc. These exercises are often performed rhythmically and with minimal equipment, as bodyweight exercises.

<span class="mw-page-title-main">Bench press</span> Exercise of the upper body

The bench press, or chest press, is a weight training exercise where a person presses a weight upwards while lying horizontally on a weight training bench. Although the bench press is a full-body exercise, the muscles primarily used are the pectoralis major, the anterior deltoids, and the triceps, among other stabilizing muscles. A barbell is generally used to hold the weight, but a pair of dumbbells can also be used.

<span class="mw-page-title-main">Push-up</span> Calisthenics exercise

The push-up is a common calisthenics exercise beginning from the prone position. By raising and lowering the body using the arms, push-ups exercise the pectoral muscles, triceps, and anterior deltoids, with ancillary benefits to the rest of the deltoids, serratus anterior, coracobrachialis and the midsection as a whole. Push-ups are a basic exercise used in civilian athletic training or physical education and commonly in military physical training. They are also a common form of punishment used in the military, school sport, and some martial arts disciplines. Variations of push-ups, such as wide-arm push-ups, diamond push-ups target specific muscle groups and provide further challenges.

Bicep curls are a group of weight training exercises in which a person bends their arm towards their body at the elbow in order to make their biceps stronger.

Body for Life (BFL) is a 12-week nutrition and exercise program, and also an annual physique transformation competition. The program utilizes a low-fat high-protein diet. It was created by Bill Phillips, a former competitive bodybuilder and previous owner of EAS, a manufacturer of nutritional supplements. It has been popularized by a bestselling book of the same name.

<span class="mw-page-title-main">Deadlift</span> Weight training exercise

The deadlift is a weight training exercise in which a loaded barbell or bar is lifted off the ground to the level of the hips, torso perpendicular to the floor, before being placed back on the ground. It is one of the three powerlifting exercises, along with the squat and bench press, as well as a frequent lift in strongman.

<span class="mw-page-title-main">Isometric exercise</span> Static contraction exercises

An isometric exercise is a form of exercise involving the static contraction of a muscle without any visible movement in the angle of the joint. The term "isometric" combines the Greek words isos (equal) and -metria (measuring), meaning that in these exercises the length of the muscle and the angle of the joint do not change, though contraction strength may be varied. This is in contrast to isotonic contractions, in which the contraction strength does not change, though the muscle length and joint angle do.

<span class="mw-page-title-main">Lying triceps extension</span> Strength exercise

The lying triceps extension, also known as skull crusher and French extension or French press, is a strength exercise used in many different forms of strength training. It is one of the most stimulating exercises to the entire triceps muscle group in the upper arm, and works the triceps from the elbow all the way to the latissimus dorsi. Due to its full use of the triceps muscle group, the lying triceps extensions are used by many as part of their training regimen.

<span class="mw-page-title-main">Kettlebell</span> Cast iron or cast steel ball with a handle attached to the top

In weight training, a kettlebell is a cast-iron or cast-steel ball with a handle attached to the top. It is used to perform many types of exercises, including ballistic exercises that combine cardiovascular, strength and flexibility training. Kettlebells are the primary equipment used in the weight-lifting sport of kettlebell lifting.

<span class="mw-page-title-main">Exercise equipment</span>

Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise by providing either fixed or adjustable amounts of resistance, or to otherwise enhance the experience or outcome of an exercise routine.

A bent-over row is a weight training exercise that targets a variety of back muscles. Which ones are targeted varies on form. The bent over row is often used for both bodybuilding and powerlifting.

<span class="mw-page-title-main">Pull-down (exercise)</span> Strength training exercise

The pull-down exercise is a strength training exercise designed to develop the latissimus dorsi muscle. It performs the functions of downward rotation and depression of the scapulae combined with adduction and extension of the shoulder joint.

<span class="mw-page-title-main">Fly (exercise)</span> Strength training exercise

A fly or flye is a strength training exercise in which the hand and arm move through an arc while the elbow is kept at a constant angle. Flies are used to work the muscles of the upper body. Because these exercises use the arms as levers at their longest possible length, the amount of weight that can be moved is significantly less than equivalent press exercises for the same muscles . Due to this leverage, fly exercises of all types have a large potential to damage the shoulder joint and its associated ligaments and the tendons of the muscles connecting to it. They should be done with caution and their effects first tested while using very light weights; which are gradually incremented after more strength is gained.

<span class="mw-page-title-main">Dip (exercise)</span> Upper-body strength exercise

A dip is an upper-body strength exercise. Close grip dips primarily train the triceps, with major synergists being the anterior deltoid, the pectoralis muscles, and the rhomboid muscles of the back. Wide shoulder width dips place additional emphasis on the pectoral muscles, similar in respect to the way a wide grip bench press would focus more on the pectorals and less on the triceps.

<span class="mw-page-title-main">Power tower (exercise)</span>

A power tower, also known as a knee raise station, and as a captain's chair, is a piece of exercise equipment that allows one to build upper body and abdominal muscle strength. When only the forearm pads alone are used for performing abdominal exercises, the power tower requires minimal arm strength as it is stable and movement occurs in the hips and torso. The equipment commonly has a backrest and forearm rests that form the chair, with vertical handles at the ends of the arm rests. The word "power" comes from the addition of other powerful arm exercises such as parallel horizontal handles for performing dips, a pull-up bar attached to the top for chin-ups and pull-ups, and push-up handles that are usually found on the bottom for Atlas ("deep") push-ups.

The rear delt raise, also known as the rear deltoid raise, or rear shoulder raise is an exercise in weight training. This exercise is an isolation exercise that heavily works the posterior deltoid muscle. The movement is primarily limited to the two shoulder joints: the glenohumeral joint and the scapulothoracic joint. Scapular movement will also cause movement in the sternoclavicular joint and acromioclavicular joint. If the elbow bends during the extension exercises, it gravitates into a rowing motion.

<span class="mw-page-title-main">Plank (exercise)</span> Isometric strength exercise

The plank is an isometric core strength exercise that involves maintaining a position similar to a push-up for the maximum possible time.

<span class="mw-page-title-main">Kettlebell lifting</span> Form of lifting exercise

Kettlebell Sport lifting a.k.a. Girya is a repetitive weight lifting sport performed with kettlebells in a given period of time.

<span class="mw-page-title-main">Anatomical terms of muscle</span> Muscles terminology

Anatomical terminology is used to uniquely describe aspects of skeletal muscle, cardiac muscle, and smooth muscle such as their actions, structure, size, and location.

References

  1. Lever Seated Fly at exrx.com
  2. Pec Dec fly at exrx.com