Malta Mill, Middleton

Last updated

Malta Mill.jpg
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (mule twist mill)
Location Chadderton, Greater Manchester, England
Serving canal Rochdale Canal
Serving railway Lancashire and Yorkshire Railway
OwnerMalta Mill Company
Further ownership
Coordinates 53°32′53″N2°10′09″W / 53.5481°N 2.1692°W / 53.5481; -2.1692
Construction
Completed1904
Design team
Architect Frederick Dixon
Power
Date1904
Engine maker Buckley & Taylor
Decommissioned1963
Engine typevertical triple expansion engine
Valve Gear Corliss valves on all cylinders
Cylinder diameter and throw20"HP, 32"IP, 52"LP X 4ft stroke.
rpm72rpm
Installed horse power (ihp)1200
Flywheel diameter22ft
Transmission typerope
No. of ropes32
Boiler configuration
BoilersTwin Lancashire, coal fired
Pressure160psi
Equipment
Mule Framestwist
References
[1]

Malta Mill, Middleton is a former cotton spinning mill in the Mills Hill area of Chadderton, Greater Manchester. It lies alongside the Rochdale Canal. It was built in 1904 as a new mule mill, by F. W. Dixon The engine stopped in 1963. The building still stands.

Contents

Prior to 1933 boundary changes the mill lay within Middleton.

History

Historically a part of Lancashire, Middleton took its name from being situated in the centre of several circumjacent settlements. In 1770, Middleton was a village of 20 houses; during the 18th and 19th centuries it grew into a thriving and populous seat of textile manufacture, so much so that Middleton was granted borough status in 1886.

During the Middle Ages, Middleton was a centre of domestic flannel and woollen cloth production. Industrial scale textile manufacture was introduced to Middleton as a result of the Industrial Revolution. Middleton became a centre for silk production in the 18th century, which developed into a cotton spinning industry by the mid 19th-century and which continued through to the mid-20th century. [2] Rochdale rose to prominence during the 19th century as a major mill town and centre for textile manufacture during the Industrial Revolution. It was a boomtown of the Industrial Revolution, and amongst the first ever industrialised towns. [3] The Rochdale Canal—one of the major navigable broad canals of the United Kingdom—was a highway of commerce during this time used for the haulage of cotton, wool, coal to and from the area. [3] In 1882, Rochdale the home of industrial co-operatives, embraced the joint stock limited company and new mills were financed and built. [4] Its ownership model was slightly different from that of Oldham, and more shares remained in the hands of the operatives. The Rochdale Limiteds were some of the first to adopt ring spinning.

Malta Mill was one of a cluster of mills built in 1904–05.

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [5] Malta Mill, Middleton was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950. The mill closed in 1963. [6]

Malta Mill still stands in 2010 and is used by many businesses; including for document storage and as a bonded warehouse.

Architecture

Designed by F. W. Dixon and built in 1905. A substantial building from Accrington brick.

Power

Driven by a 1200 hp vertical triple expansion engine by Buckley & Taylor, 1904. It had a 22 ft flywheel, 32 ropes operating at 72rpm. Its cylinders, 20"HP, 32"IP, 52"LP, had a 4 ft stroke. It was steamed at 160psi. 72rpm. 22 ft flywheel, 32 ropes. Corliss valves on all cylinders. The air pump was driven from LP crosshead. It had an eight bearing crankshaft. [7]

Equipment

110,160 mule spindles in 1915.

Owners


See also

Related Research Articles

<span class="mw-page-title-main">Regent Mill, Failsworth</span> Cotton mill in Greater Manchester, England

Regent Mill, Failsworth is a Grade II listed former cotton spinning mill in Failsworth, Oldham, Greater Manchester, England. It was built by the Regent Mill Co Ltd. in 1905, and purchased by the Lancashire Cotton Corporation in 1930. It was taken over by the Courtaulds Group in 1964. On ceasing textile production it was occupied by Pifco Ltd, and then by Salton Europe Ltd who now occupy this site. It was driven by an 1800 hp twin tandem compound engine by Buckley & Taylor. It became a ring mill with 60,000 spindles in 1915, all provided by Platt Brothers.

<span class="mw-page-title-main">Trent Mill</span> Cotton mill in Greater Manchester, England

Trent Mill was a cotton spinning mill on Duchess Street in Shaw and Crompton, Greater Manchester, England. It was built by F.W. Dixon & Son in 1908. It closed and was taken over by the Lancashire Cotton Corporation in 1929 reopened in 1938 and closed again in 1962, and was demolished in 1967.

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

<span class="mw-page-title-main">Ace Mill, Hollinwood</span>

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

<span class="mw-page-title-main">Arkwright Mill, Rochdale</span> Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

<span class="mw-page-title-main">Bolton Union Mill, Bolton</span> Cotton mill in Bolton, Greater Manchester, England

Bolton Union Mill was a cotton spinning mill in Halliwell, Bolton, Greater Manchester. It was built in 1875 and 1880. It was taken over by the Lancashire Cotton Corporation in the 1930s and brought back into production. Subsequently, it passed to Tootals and Dewhurst Dent in 1964. Production finished in 1967.

<span class="mw-page-title-main">Brunswick Mill, Ancoats</span> Cotton mill in Manchester, England

Brunswick Mill, Ancoats is a former cotton spinning mill on Bradford Road in Ancoats, Manchester, England. The mill was built around 1840, part of a group of mills built along the Ashton Canal, and at that time it was one of the country's largest mills. It was built round a quadrangle, a seven-storey block facing the canal. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967.

<span class="mw-page-title-main">Mavis Mill</span> Cotton mill in Lancashire, England

Mavis Mill was a cotton spinning mill in Coppull, Chorley, Lancashire

<span class="mw-page-title-main">Dawn Mill, Shaw</span> Cotton mill in Greater Manchester, England

Dawn Mill, Shaw was a cotton spinning mill in Shaw and Crompton, Oldham, Greater Manchester. It was built on the site of Shaw Mill at the "dawn" of the 20th century. Dawn Mill was equipped with mule weft spindles in 1950. It was powered by Engines named Venus and Mars, 1800 hp twin tandem compound engine by George Saxon of Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was sold again and used by distribution company DTS Logistics for storing and distributing clothing. It was demolished in 2006 to make way for an Asda supermarket.

<span class="mw-page-title-main">Fox Mill</span>

Fox Mill was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

<span class="mw-page-title-main">Wilton Mill, Radcliffe</span> Cotton mill in Greater Manchester, England

Wilton Mill, Radcliffe was a cotton spinning mill in Radcliffe, Bury, Greater Manchester. It was built in 1907 and was taken over by the Lancashire Cotton Corporation in 1930 and passed to Courtaulds in 1964. Production finished in 1965, after which it was used by the East Lancashire Paper Company but has now been demolished leaving an empty site next to the railways and the River Irwell.

<span class="mw-page-title-main">Pilot Mill, Bury</span> Cotton mill in Greater Manchester, England

Pilot Mill, Bury is a four-storey cotton spinning mill in Bury, Greater Manchester, England. It was built in 1905 for the Pilot Spinning Co. It was taken over by the Lancashire Cotton Corporation in 1939. The mill closed in 1962 and was later sold to Antler Luggage. The Mill is currently occupied by Baum Trading Ltd and Metzuyan Ltd they have opened a retail outlet with an on site cafe.

<span class="mw-page-title-main">Kent Mill, Chadderton</span> Cotton spinning mill in England

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 for the Kent Mill Co. It was taken over by the Lancashire Cotton Corporation in 1938 and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

<span class="mw-page-title-main">Manor Mill, Chadderton</span> Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

<span class="mw-page-title-main">Heron Mill, Hollinwood</span> Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994 with the Andrew Design Procurement further holding the site until 1998.

<span class="mw-page-title-main">Royd Mill, Oldham</span> Cotton mill in Greater Manchester, England

Royd Mill, Oldham was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was built in 1907, and extended in 1912 and 1924. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1981. The mill was demolished in 2015 to make way for a "DifRent" housing scheme.

<span class="mw-page-title-main">Laurel Mill, Middleton Junction</span> Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

<span class="mw-page-title-main">Junction Mill, Middleton Junction</span> Cotton mill in Greater Manchester, England

Junction Mill, Middleton Junction is a cotton spinning mill at Middleton junction, Chadderton in Greater Manchester alongside the Rochdale Canal.

<span class="mw-page-title-main">Harp Mill, Castleton</span> Cotton mill in Greater Manchester, England

Harp Mill was a former cotton spinning mill in the Castleton, Rochdale, Greater Manchester, England. Queensway, Castleton was a hub of cotton mills including the three 't', Th'Arrow, Th'Harp, and Th'Ensor. The 1908 Castleton map includes: Marland Cotton Mill, Castleton Cotton Mill, Globe Works, Arrow Cotton Mill, Harp Cotton Mill, Globe Leather Works, Castleton Size Works and Castleton Iron Works. Th'Harp was built in 1908 for the Harp Doubling Company and was taken over by the Lancashire Cotton Corporation in 1938. The mill closed in 1958, and was sold to the hosiery manufacturer N. Corah Ltd.

<span class="mw-page-title-main">Mars Mill, Castleton</span> Cotton mill in Greater Manchester, England

Mars Mill was a former cotton spinning mill in Castleton, Rochdale, Greater Manchester, England. Castleton joined the Borough of Rochdale in 1899. Queensway, Castleton was a hub of cotton mills; Mars, Marland, and Castleton Mill were a group of three. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964 and demolished in the 1990s; Marland survived until 2004.

References

  1. ↑ LCC 1951
  2. ↑ Rochdale Metropolitan Borough Council (N.D.), p. 29.
  3. 1 2 McNeil, R.; Nevell, M. (2000), A Guide to the Industrial Archaeology of Greater Manchester, Association for Industrial Archaeology, ISBN   0-9528930-3-7
  4. ↑ Williams & Farnie 1992 , p. 44
  5. ↑ Dunkerley 2009
  6. ↑ The Times, 24 January 1964, p. 22
  7. ↑ Roberts 1921

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.