Malta Mill, Middleton

Last updated

Malta Mill.jpg
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (mule twist mill)
Location Chadderton, Greater Manchester, England
Serving canal Rochdale Canal
Serving railway Lancashire and Yorkshire Railway
OwnerMalta Mill Company
Further ownership
Coordinates 53°32′53″N2°10′09″W / 53.5481°N 2.1692°W / 53.5481; -2.1692 Coordinates: 53°32′53″N2°10′09″W / 53.5481°N 2.1692°W / 53.5481; -2.1692
Construction
Completed1904
Design team
Architect Frederick Dixon
Power
Date1904
Engine maker Buckley & Taylor
Decommissioned1963
Engine typevertical triple expansion engine
Valve Gear Corliss valves on all cylinders
Cylinder diameter and throw20"HP, 32"IP, 52"LP X 4ft stroke.
rpm72rpm
Installed horse power (ihp)1200
Flywheel diameter22ft
Transmission typerope
No. of ropes32
Boiler configuration
BoilersTwin Lancashire, coal fired
Pressure160psi
Equipment
Mule Framestwist
References
[1]

Malta Mill, Middleton is a former cotton spinning mill in the Mills Hill area of Chadderton, Greater Manchester. It lies alongside the Rochdale Canal. It was built in 1904 as a new mule mill, by F. W. Dixon The engine stopped in 1963. The building still stands.

Contents

Prior to 1933 boundary changes the mill lay within Middleton.

History

Historically a part of Lancashire, Middleton took its name from being situated in the centre of several circumjacent settlements. In 1770, Middleton was a village of 20 houses; during the 18th and 19th centuries it grew into a thriving and populous seat of textile manufacture, so much so that Middleton was granted borough status in 1886.

During the Middle Ages, Middleton was a centre of domestic flannel and woollen cloth production. Industrial scale textile manufacture was introduced to Middleton as a result of the Industrial Revolution. Middleton became a centre for silk production in the 18th century, which developed into a cotton spinning industry by the mid 19th-century and which continued through to the mid-20th century. [2] Rochdale rose to prominence during the 19th century as a major mill town and centre for textile manufacture during the Industrial Revolution. It was a boomtown of the Industrial Revolution, and amongst the first ever industrialised towns. [3] The Rochdale Canal—one of the major navigable broad canals of the United Kingdom—was a highway of commerce during this time used for the haulage of cotton, wool, coal to and from the area. [3] In 1882, Rochdale the home of industrial co-operatives, embraced the joint stock limited company and new mills were financed and built. [4] Its ownership model was slightly different from that of Oldham, and more shares remained in the hands of the operatives. The Rochdale Limiteds were some of the first to adopt ring spinning.

Malta Mill was one of a cluster of mills built in 1904–05.

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [5] Malta Mill, Middleton was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950. The mill closed in 1963. [6]

Malta Mill still stands in 2010 and is used by many businesses; including for document storage and as a bonded warehouse.

Architecture

Designed by F. W. Dixon and built in 1905. A substantial building from Accrington brick.

Power

Driven by a 1200 hp vertical triple expansion engine by Buckley & Taylor, 1904. It had a 22 ft flywheel, 32 ropes operating at 72rpm. Its cylinders, 20"HP, 32"IP, 52"LP, had a 4 ft stroke. It was steamed at 160psi. 72rpm. 22 ft flywheel, 32 ropes. Corliss valves on all cylinders. The air pump was driven from LP crosshead. It had an eight bearing crankshaft. [7]

Equipment

110,160 mule spindles in 1915.

Owners


See also

Related Research Articles

Trencherfield Mill Cotton mill in Greater Manchester, England

Trencherfield Mill is a cotton spinning mill standing next to the Leeds and Liverpool Canal in Wigan, Greater Manchester, England. It was built in 1907. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The mill was driven by a 2,500 hp triple-expansion four-cylinder engine built by J & E Wood of Bolton in 1907. The two halves of the engine were called Rina and Helen. They drove a 26-foot flywheel with 54 ropes at 68 rpm. The engine was stopped in 1968. The mill is now part of the Wigan Pier redevelopment area and is used for other purposes.

Regent Mill, Failsworth Cotton mill in Greater Manchester, England

Regent Mill, Failsworth is a Grade II listed former cotton spinning mill in Failsworth, Oldham, Greater Manchester, England. It was built by the Regent Mill Co Ltd. in 1905, and purchased by the Lancashire Cotton Corporation in 1930. It was taken over by the Courtaulds Group in 1964. On ceasing textile production it was occupied by Pifco Ltd, and then by Salton Europe Ltd who now occupy this site. It was driven by an 1800 hp twin tandem compound engine by Buckley & Taylor. It became a ring mill with 60,000 spindles in 1915, all provided by Platt Brothers.

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

Ace Mill, Hollinwood

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

Arkwright Mill, Rochdale Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

Bolton Union Mill, Bolton Cotton mill in Bolton, Greater Manchester, England

Bolton Union Mill was a cotton spinning mill in Halliwell, Bolton, Greater Manchester. It was built in 1875 and 1880. It was taken over by the Lancashire Cotton Corporation in the 1930s and brought back into production. Subsequently, it passed to Tootals and Dewhurst Dent in 1964. Production finished in 1967.

Brunswick Mill, Ancoats Cotton mill in Manchester, England

Brunswick Mill, Ancoats is a former cotton spinning mill on Bradford Road in Ancoats, Manchester, England. The mill was built around 1840, part of a group of mills built along the Ashton Canal, and at that time it was one of the country's largest mills. It was built round a quadrangle, a seven-storey block facing the canal. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967.

Coppull Mill Cotton mill in Chorley, Lancashire, England

Coppull Mill is a former cotton spinning mill in Coppull, Chorley, Lancashire. It was opened in 1906, and its sister mill, Mavis Mill in 1908. Together they employed 700 workers. The mill was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The building is a Grade II listed building and is now used as an enterprise centre. This was a ring mill. It was driven by a 1600 hp triple-expansion four-cylinder engine by J & E Wood built in 1906. Its 26-foot (7.9 m) flywheel operated at 68 rpm and ran 36 ropes.

Mavis Mill Cotton mill in Lancashire, England

Mavis Mill was a cotton spinning mill in Coppull, Chorley, Lancashire

Fox Mill

Fox Mill, Hollinwood is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Pilot Mill, Bury Cotton mill in Greater Manchester, England

Pilot Mill, Bury is a four-storey cotton spinning mill in Bury, Greater Manchester, England. It was built in 1905 for the Pilot Spinning Co. It was taken over by the Lancashire Cotton Corporation in 1939. The mill closed in 1962 and was later sold to Antler Luggage. The Mill is currently occupied by Baum Trading Ltd and Metzuyan Ltd they have opened a retail outlet with an on site cafe.

Kent Mill, Chadderton

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 for the Kent Mill Co. It was taken over by the Lancashire Cotton Corporation in 1938 and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

Manor Mill, Chadderton Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

Heron Mill, Hollinwood Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

Royd Mill, Oldham Cotton mill in Greater Manchester, England

Royd Mill, Oldham was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was built in 1907, and extended in 1912 and 1924. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1981. The mill was demolished in 2015 to make way for a "DifRent" housing scheme.

Orme Mill, Waterhead Cotton mill in Greater Manchester, England

Orme Mill, Waterhead is a cotton spinning mill in Waterhead, Oldham, Greater Manchester, England. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1930s and production finished in 1960. The mill was passed on to Ferranti in 1964, and is now in multiple usage.

Laurel Mill, Middleton Junction Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

Junction Mill, Middleton Junction Cotton mill in Greater Manchester, England

Junction Mill, Middleton Junction is a cotton spinning mill at Middleton junction, Chadderton in Greater Manchester alongside the Rochdale Canal.

Harp Mill, Castleton Cotton mill in Greater Manchester, England

Harp Mill was a former cotton spinning mill in the Castleton, Rochdale, Greater Manchester, England. Queensway, Castleton was a hub of cotton mills including the three 't', Th'Arrow, Th'Harp, and Th'Ensor. The 1908 Castleton map includes: Marland Cotton Mill, Castleton Cotton Mill, Globe Works, Arrow Cotton Mill, Harp Cotton Mill, Globe Leather Works, Castleton Size Works and Castleton Iron Works. Th'Harp was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The site now houses industrial units.

Mars Mill, Castleton Cotton mill in Greater Manchester, England

Mars Mill was a former cotton spinning mill in Castleton, Rochdale, Greater Manchester, England. Castleton joined the Borough of Rochdale in 1899. Queensway, Castleton was a hub of cotton mills; Mars, Marland, and Castleton Mill were a group of three. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964 and demolished in the 1990s; Marland survived until 2004.

References

  1. ↑ LCC 1951
  2. ↑ Rochdale Metropolitan Borough Council (N.D.), p. 29.
  3. 1 2 McNeil, R.; Nevell, M. (2000), A Guide to the Industrial Archaeology of Greater Manchester, Association for Industrial Archaeology, ISBN   0-9528930-3-7
  4. ↑ Williams & Farnie 1992 , p. 44
  5. ↑ Dunkerley 2009
  6. ↑ The Times, 24 January 1964, p. 22
  7. ↑ Roberts 1921

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.