| T3M | |
|---|---|
 | |
| T3M-2 floatplane | |
| Role | Torpedo bomber |
| Manufacturer | Glenn L. Martin Company |
| First flight | 1926 |
| Introduction | 1926 |
| Retired | 1932 |
| Primary user | United States Navy |
| Number built | 124 |
| Developed from | Curtiss CS |
| Variants | Martin T4M |
The Martin T3M was an American torpedo bomber of the 1920s. A single-engined three-seat biplane, it became a standard torpedo bomber of the U.S. Navy, operating from both land bases and from aircraft carriers from 1926 to 1932.
Having built 75 examples of the Martin SC, the production version of the Curtiss CS in 1925, the Glenn L. Martin Company was able to offer an improved version when the U.S. Navy had a requirement for an improved torpedo-bomber/scout aircraft. This aircraft, which was designated the T3M-1, first flew in July 1926. [1]
The T3M was a large single-engined biplane capable of being fitted with either a conventional tailwheel undercarriage or floats. The fuselage was constructed of welded steel tube in place of the riveted steel frame of the CS/SC, [2] with the pilot and bombardier seated side by side in the front cockpit situated forward of the wing, with the bombardier having a position under the nose for aiming the aircraft's bombs or torpedoes, while the gunner had a cockpit well aft of the wing, with a radiator slung under the top wing between the cockpits. [3] Power was from a 575 hp (429 kW) Wright T-3B V-12 engine. 24 T3M-1s were built. [4]
As the T3M-1 was underpowered, [2] a new version was produced with the much more powerful (770 hp/574 kW) Packard 3A-2500 engine. This version, the T3M-2 had revised wings with the upper and lower wings of equal span (while in the T3M-1 the lower wings were of greater span), and the radiator was replaced by two radiators on the fuselage side, allowing the crew to be moved to three individual tandem cockpits. [4] The U.S. Navy ordered 100 T3M-2s, one of which was re-engined with the Pratt & Whitney Hornet and the Wright Cyclone radial engines as the XT3M-3 and XT3M-4 respectively. [4] These aircraft formed the basis of the Martin T4M that would replace the T3M in service with the U.S. Navy.
Deliveries of the T3M-1 to the U.S. Navy started in September 1926. [1] The T3M-1 was not heavily used, however, and was replaced in service by the more powerful T3M-2 from 1927. Although the T3M-2 itself was replaced in frontline service by its radial-powered development, the T4M, it remained in squadron service until at least 1932. [1]
United States Data from United States Navy Aircraft since 1911 [6]
General characteristics
Performance
Armament
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Thomas-Morse MB-3 was an open-cockpit biplane fighter primarily manufactured by the Boeing Company for the U.S. Army Air Service in 1922. The MB-3A was the mainstay fighter for the Air Service between 1922 and 1925.
The Boeing Model 15 was a United States single-seat open-cockpit biplane fighter aircraft of the 1920s, manufactured by the Boeing company. The Model 15 saw service with the United States Army Air Service and with the United States Navy as a carrier-based fighter.
The Curtiss F6C Hawk was a late 1920s American naval biplane fighter aircraft. It was part of the long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.
The Vought FU was a biplane fighter aircraft of the United States Navy in service during the late 1920s.
The Douglas O-2 was a 1920s American observation aircraft built by the Douglas Aircraft Company.
The Boeing TB was an American torpedo bomber biplane designed by the US Navy and built by Boeing in 1927.
The Mitsubishi 2MR was a Japanese carrier-based reconnaissance aircraft of the 1920s, also known as the Navy Type 10 Carrier Reconnaissance Aircraft or the C1M in the Navy's short designation scheme. Designed for Mitsubishi by the British aircraft designer Herbert Smith, the 2MR was used by the Imperial Japanese Navy through the 1920s and 1930s.
The Naval Aircraft Factory PN was a series of open cockpit American flying boats of the 1920s and 1930s. A development of the Felixstowe F5L flying boat of the First World War, variants of the PN were built for the United States Navy by Douglas, Keystone and Martin.
The Curtiss CS was a reconnaissance and torpedo bomber aircraft used by the United States Navy during the 1920s. It was a large single-engine biplane with single-bay unstaggered wings, the design conventional in all respects other than that the lower wing was of greater span than the upper. The CS was built to allow its undercarriage to be quickly and easily interchangeable between wheeled, tailskid undercarriage, and twin pontoons for operation from water. Provision for the carriage of a torpedo was semi-recessed into the underside of the fuselage, blended in behind an aerodynamic fairing. The pilot and gunner sat in tandem open cockpits, while accommodation inside the fuselage was provided for a third crewmember who served as bombardier and radio operator. This station was also provided with a dorsal hatch aft of the gunner's position, and a ventral blister aft of the torpedo recess, which was used for aiming bombs or torpedoes.
The Huff-Daland LB-1 was an American biplane light bomber aircraft operated by the United States Army Air Service in the 1920s.
The Dornier Do H Falke was a German single-seat fighter, designed by Claude Dornier and built by Dornier Flugzeugwerke. Although an advanced design for its time, being evaluated by the United States Navy as the Wright WP-1, it did not go into production.
The Great Lakes BG was an American carrier-based dive bomber of the 1930s. Designed and built by the Great Lakes Aircraft Company of Cleveland, Ohio, 61 were used by the United States Navy and United States Marine Corps from 1934 to 1940.
The Hall PH was an American flying boat of the 1930s. It was a twin-engined biplane, developed from the Naval Aircraft Factory PN and could hence trace its lineage back to the Felixstowe flying boats of World War I. The PH was purchased in small numbers by the United States Navy and the United States Coast Guard. It remained in service with the Coast Guard until 1944, being used for anti-submarine and search and rescue duties.
The Martin MB-1 was an American large biplane bomber designed and built by the Glenn L. Martin Company for the United States Army Air Service in 1918. It was the first purpose-built bomber produced by the United States.
The Martin T4M was an American torpedo bomber of the 1920s. A development by the Glenn L. Martin Company of their earlier Martin T3M, and, like it a single-engined biplane, the T4M served as the standard torpedo bomber aboard the aircraft carriers of the United States Navy through much of the 1930s.
The Verville VCP was an American single-engined biplane fighter aircraft of the 1920s. A single example of the VCP-1 was built by the United States Army Air Service's Engineering Division, which was later rebuilt into a successful racing aircraft, while a second, modified fighter was built as the PW-1.
The Waco F series is a series of American-built general aviation and military biplane trainers of the 1930s from the Waco Aircraft Company.
The Curtiss CT-1 model 24, a twin engine torpedo bomber mounted on floats, was first flown in 1921.
The Thomas Morse MB-9 was an experimental American fighter aircraft of the 1920s. It was a single-engined, single-seat parasol winged monoplane, but was unsuccessful, being quickly abandoned.
Naval Aircraft Factory NO was an American short-range reconnaissance/gun spotting aircraft of the 1920s. A single-engined three-seat biplane with alternative floats or wheels, six were built for the U.S. Navy.
 | Wikimedia Commons has media related to Martin T3M . |