T.2 Dart | |
---|---|
General information | |
Type | Torpedo bomber |
Manufacturer | Blackburn Aircraft |
Primary user | Royal Air Force (Fleet Air Arm) |
Number built | 118 (plus eight Swift export models) |
History | |
Manufactured | 1922–1928 |
Introduction date | 1922 |
First flight | October 1921 |
Retired | 1933 |
Variants | Blackburn Velos |
The Blackburn Dart was a carrier-based torpedo bomber biplane aircraft, designed and manufactured by the British aviation company Blackburn Aircraft. It was the standard single-seat torpedo bomber operated by the Fleet Air Arm (FAA) between 1923 and 1933.
Work on what would become the Dart started in 1919 as a private venture. Originally known as the T.1 Swift, it performed its maiden flight in September 1920. Three aircraft were ordered for evaluation to fulfil Air Ministry Specification 3/20, which received the name Dart. First flown in October 1921, its performance quickly impressed officials and a production order was issued to Blackburn on behalf of the FAA. The Swift name was retained for the pursuit of export sales. Several Darts were supplied to overseas operators, including the Japanese Navy, Spanish Navy and the United States Navy. Greece opted to procure a modified seaplane variant of the aircraft, the Blackburn Velos, which was operated by the Greek Navy as a torpedo bomber.
During late 1919, Blackburn commenced design work on what would become the Dart; it was initially pursued as a private venture. Around this time, the Air Ministry had reissued its requirement for a new carrier-based torpedo-bomber that would replace the Sopwith Cuckoo, the standard torpedo bomber of the era being flown from the aircraft carriers of the Royal Navy. [1] Blackburn's efforts were led by their chief designer, Major [[Frank Arnold Bumpus|Frank Bumpus]. Designing was undertaken in close collaboration with the British engineering company D. Napier & Son. This new aircraft was originally named the T.1 Swift. [2] [1]
It was a relatively large single-seat biplane, which was in several respects considered to be a conventional design for the era. [1] It was built around a central nucleus in which the centre fuselage, top centre section, lower wing roots, and undercarriage attachments were one rigid structure composed of steel tubing. This structure provided sufficient strength to withstand the high stresses of carrier operations and carry a heavy concentrated payload, while also being relatively easy to maintain and repair. [3] A similar tubular structure was used for the rear fuselage. The fuselage had an unusual humped appearance due to the decking forward of the pilot sloping sharply downwards to maximise forward visibility over the engine, which was particularly useful during landings. [3]
The Swift had staggered two-bay equal-span wings that could be folded for storage; this arrangement meant Blackburn was the first British company to address the issue of a foldable staggered wing cellule. [4] The centre section of the wing structure was steel, while the outer sections were composed of wood, all of which were covered by fabric. Ailerons were present on all four wings. [4] The tail unit had a braced tailplane and fin with a balanced rudder. The divided landing gear had main wheels on shock absorber (oleo) legs that allowed the fitting of a standard torpedo below the fuselage. [5] [6]
A novelty was the detachable mounting for the engine, which facilitated its replacement as a complete power unit and enabled its swapping in a matter of hours. [3] Another advanced feature was the presence of a fireproof bulkhead between the engine bay and the self-sealing fuel tank in the fuselage, which could accommodate up to 66 imp gal (300 L; 79 US gal) of fuel; a gravity-fed tank housing up to 15 imp gal (68 L; 18 US gal) was present in the centre-top section. It was not necessary to jettison the undercarriage wheels prior to releasing the torpedo, unlike some contemporary aircraft, they were releasable to minimise the tendency for the aircraft to nose over during a forced water landing, for which floatation bags were present in the fuselage. [3] The undercarriage incorporated a triangular support structure, a lengthy support axle, and a rubber compression shock absorber leg. Slings fitted to the top centre section were used to hoist the aircraft aboard ship. [3]
By July 1920, the prototype Swift was sufficiently complete as to permit it to go on be static display to the public at the Olympia Aero Show but without a radiator or controls. [1] The aircraft had already been placed on the British Government's secret list, which meant that it could only be displayed without specialised naval equipment, such as its torpedo release apparatus. The torpedo had to be placed on the ground between the undercarriage rather than being placed in its operational position. [1]
During September 1920, the prototype Swift conducted its maiden flight; it reportedly almost crashed during the flight on account of its miscalculated centre of gravity. [7] [3] This problem was solved by sweeping back the wings. Following this modification, the Swift proved largely satisfactory in flight; on 23 December 1920, it was brought to RAF Martlesham Heath for performance trials by the Aeroplane and Armament Experimental Establishment. [8] One requested change, made in January 1921, was the fitting of an enlarged rudder to improve directional control. By 20 April, the trials had been completed. [8]
On 9 May 1921, following the installation of a new engine, a stiffened cowling, and arrestor claws on the stub axles, the prototype was dispatched to Gosport. [8] Shortly thereafter, the type's first deck landing was performed by the Canadian pilot Gerald Boyce onboard HMS Argus. [8] Having suitably impressed officials, Blackburn received an order for three aircraft to conduct service trials as per Air Ministry Specification 3/20. These aircraft, which were equipped to Admiralty requirements, received the name Dart. [9] [10]
The Dart had its wingspan reduced by 2 ft 11 in (0.89 m), which brought the twin tips closer to the outboard interplane struts, was the most visually distinctive change. [10] Other modifications included the adoption of more powerful engines, either a Napier Lion IIB or V engine that was mounted with a thrust line angled upward. The claw arrestor gear that had been fitted experimentally to the Swift prototype was also fitted as standard. [10]
During October 1921, the prototype Dart performed its first flight; on 24 October, it was flown from Brough to RAF Martlesham for performance testing. [10] It reportedly handled well, in spite of its size and exhibited a remarkable stalling speed of only 43 mph (69 km/h). The first prototype also participated in deck handling trials aboard Argus. The second and third prototypes underwent various evaluations, most of which were performed at Martlesham. [11] A series of competitive trials against the Handley Page Hanley were conducted at Gosport, during which the Dart emerged as the victor and became the new standard torpedo bomber of the Fleet Air Arm. An initial production contract for 26 aircraft was issued to Blackburn. [12]
During March 1922, deliveries commenced, having been built at Blackburn's Olympia Works and tested at Brough. [12] Three additional batches of ten Darts each were produced between 1923 and 1924; a larger contract for 32 aircraft was issued in August 1924. As late as November 1926, more small orders for replacement aircraft were also received. Production to the Dart came to an close during 1928, by when, 117 aircraft had been produced for the FAA. [13]
An export model of the Dart retained the Swift name. This was powered by the Napier Lion engine, capable of producing up to 450 hp (340 kW). The aircraft's ability to carry up to 1,500 lb (680 kg) of bombs or an 18 in (460 mm) torpedo was attractive to international operators. [14] Seven aircraft were built as the Swift Mk II, two for the Japanese Navy, three for the Spanish Navy and two for the United States Navy. The U.S. Navy aircraft were designated Swift F by Blackburn and Blackburn BST-1 by the U.S. Navy; following competitive trials held during 1921, the U.S. Navy chose the Douglas DT-2 instead. The aircraft were retained in San Diego for a time, being used for experimental purposes. [15]
During 1923, the Dart T.2 entered service with the Fleet Air Arm (FAA). The first units to receive the type were No 460 Flight aboard HMS Eagle stationed in the Mediterranean and with 461 and 462 Flights on HMS Furious based in home waters. Shore training was conducted by "D3" Flight at Gosport. According to the aviation author Audrey Jackson, the Dart played an important role in the FAA's development and perfection of techniques for torpedo-bombing. [12]
During 1928, the Blackburn Dart flew with Nos. 463 and 464 Flights embarked on HMS Courageous in the Mediterranean fleet. [13] The following year, a Dart was delivered to 36 Squadron (Coastal Defence Torpedo Flight) RAF, initially for smokescreen trials and later to form part of the complement of torpedo bombers in the first fully operational torpedo bomber squadron of the Royal Air Force. [16]
Three Darts were converted into two-seat seaplanes to provide advanced training at Blackburn's RAF Reserve School on the River Humber between 1925 and 1929. These conversions led to a new variant, the T.3 Velos, which was procured by Greece in 1925 for use as a torpedo bomber by the Greek Navy.
The Dart continued in service with the Blackburn Reserve School, alongside a number of T.3s converted to landplanes, until their eventual replacement by the Blackburn Ripon and Blackburn Baffin during 1933. [17]
Perhaps the most notable event in the career of the Dart occurred on 6 May 1926 when Air Commodore G. H. Boyce became the first pilot to carry out a night deck landing, alighting his Dart aboard Furious. [16] The flight deck was illuminated by floodlights for the attempt but the docile Dart reportedly handled the task with ease. Within a few years, night time flights from aircraft carriers would become a routine operation. [16]
Data fromJane's Encyclopedia of Aviation, [18] Blackburn Aircraft since 1909 [19]
General characteristics
Performance
Armament
Related development
The Fairey Swordfish was a biplane torpedo bomber, designed by the Fairey Aviation Company. Originating in the early 1930s, the Swordfish, nicknamed "Stringbag", was principally operated by the Fleet Air Arm of the Royal Navy. It was also used by the Royal Air Force (RAF), as well as several overseas operators, including the Royal Canadian Air Force (RCAF) and the Royal Netherlands Navy. It was initially operated primarily as a fleet attack aircraft. During its later years, the Swordfish was increasingly used as an anti-submarine and training platform. The type was in frontline service throughout the Second World War.
The Fairey Barracuda was a British carrier-borne torpedo and dive bomber designed by Fairey Aviation. It was the first aircraft of this type operated by the Royal Navy's Fleet Air Arm (FAA) to be fabricated entirely from metal.
The Blackburn Roc was a naval fighter aircraft designed and produced by the British aviation company Blackburn Aircraft. It took its name from the mythical bird of the tales of the Arabian Nights, the Roc. It was operated by the Fleet Air Arm (FAA) and was active during the Second World War.
The Blackburn B-24 Skua was a carrier-based low-wing, two-seater, single-radial engine aircraft by the British aviation company Blackburn Aircraft. It was the first Royal Navy carrier-borne all-metal cantilever monoplane aircraft, as well as the first dive bomber in Fleet Air Arm (FAA) service. The aircraft took its name from the sea bird which 'divebombs' any potential predators that come too close to its nest.
The Sopwith T.1 Cuckoo was a British biplane torpedo bomber used by the Royal Naval Air Service (RNAS), and its successor organization, the Royal Air Force (RAF). The T.1 was the first landplane specifically designed for carrier operations, but it was completed too late for service in the First World War. After the Armistice, the T.1 was named the Cuckoo.
The Supermarine Attacker is a British single-seat naval jet fighter designed and produced by aircraft manufacturer Supermarine for the Royal Navy's Fleet Air Arm (FAA). It was the first jet fighter to enter operational service with the FAA.
The Fairey Gannet is a carrier-borne aircraft that was designed and produced by the British aircraft manufacturer the Fairey Aviation Company. It was developed for the Royal Navy, being the first fixed-wing aircraft to combine both the search and strike portions of anti-submarine warfare (ASW) operations to be operated by the Fleet Air Arm (FAA).
The Blackburn T.5 Ripon was a carrier-based torpedo bomber and reconnaissance biplane designed and produced by the British aircraft manufacturer Blackburn Aircraft. It was the basis for both the license-produced Mitsubishi B2M and the improved Blackburn Baffin.
The Blackburn Shark was a carrier-borne torpedo bomber designed and built by the British aviation manufacturer Blackburn Aircraft. It was originally known as the Blackburn T.S.R., standing for "torpedo-spotter-reconnaissance", in reference to its intended roles. The Shark was the last of Blackburn's biplane torpedo bombers.
The Blackburn B-5 Baffin biplane torpedo bomber designed and produced by the British aircraft manufacturer Blackburn Aircraft. It was a development of the Ripon, the chief change being that a 545 hp (406 kW) Bristol Pegasus I.MS radial engine had replaced the Ripon's Napier Lion water-cooled inline engine.
The Blackburn B-54 and B-88 were prototype carrier-borne anti-submarine warfare aircraft of the immediate post-Second World War era developed for the Royal Navy's Fleet Air Arm (FAA). They shared a conventional monoplane design with a mid-mounted inverted-gull wing and tricycle undercarriage. The pilot and observer sat in tandem under a long canopy atop the fuselage. The B-54 had a piston engine while the B-88 had a gas turbine driving large contra-rotating propellers. The radar scanner was mounted in a retractable radome in the rear fuselage, behind a long internal weapons bay. The program was cancelled in favour of the Fairey Gannet aircraft.
The Fairey Spearfish was a British carrier-based, single-engined, torpedo bomber/dive bomber that was ordered from Fairey Aviation for the Fleet Air Arm during World War II. Designed during the war, the prototype did not fly until July 1945. Much larger than earlier naval bombers, it was designed for use aboard the large Malta-class aircraft carriers that were cancelled after the war and was itself cancelled thereafter. Seven prototypes were ordered, but only five were built, of which four actually flew. They were mostly used for experimental work until the last aircraft was scrapped in 1952.
The Blackburn Firebrand was a British single-engine strike fighter for the Fleet Air Arm of the Royal Navy designed during World War II by Blackburn Aircraft. Originally intended to serve as a pure fighter, its unimpressive performance and the priority allocation by the Ministry of Aircraft Production of Napier Sabre engines to the Hawker Typhoon caused it to be redesigned with an alternate engine as a strike fighter to take advantage of its load-carrying capability. Development was slow and the first production aircraft was not delivered until after the end of the war. Only a few hundred were built before it was withdrawn from front-line service in 1953.
The Blackburn R-1 Blackburn was a 1920s British single-engine fleet spotter/reconnaissance aircraft built by Blackburn Aircraft.
The Blackburn B.26 Botha was a four-seat reconnaissance and torpedo bomber. It was produced by the British aviation company Blackburn Aircraft at its factories at Brough and Dumbarton.
The Blackburn T.3 Velos was a 1920s British two-seat coastal defence seaplane built by Blackburn Aeroplane & Motor Company Limited, Brough Aerodrome and the Greek National Aircraft Factory.
The Blackburn T.4 Cubaroo was a British prototype biplane torpedo bomber of the 1920s. Built by Blackburn Aircraft and intended to carry a large 21 in (533 mm) torpedo, the Cubaroo was claimed to be the largest single-engined aircraft in the world at the time of its first flight.
The Blackburn R.2 Airedale was a single-engine three-seat monoplane deck-landing aircraft for land and sea reconnaissance, built in the UK in 1924. Only two were built.
The Blackburn T.R.1 Sprat was a British single-engine two-seat biplane trainer, built in 1926 for advanced training, deck-landing and seaplane experience. Just one was built.
The Blackburn B.T.1 Beagle was a British single-engine, two-seat biplane bomber/torpedo aircraft from 1928. Designed to Air Ministry specifications which led to no contracts for any manufacturer, only one Beagle was built.