Douglas DT

Last updated
DT
Douglas DT-2 taking off from USS Langley (CV-1) on 2 April 1925 (NH 93180).jpg
Douglas DT-2 launched from USS Langley, San Diego, California
General information
TypeTorpedo bomber
Manufacturer Douglas Aircraft Company
Primary user United States Navy
Number built90
History
Manufactured1921–1929
First flightNovember 1921
Variants Douglas World Cruiser

The Douglas DT bomber was the Douglas Aircraft Company's first military contract, forging a link between the company and the United States Navy. Navy Contract No. 53305 of April 1, 1921, required only 18 pages to set out the specifications that resulted in the purchase of three DT (D for Douglas, T for torpedo) folding-wing aircraft.

Contents

The DT used a welded steel fuselage with aluminum covering the forward and center sections and fabric covering the rear section. Douglas built 46 DT-1 and DT-2 torpedo bombers for the U.S. Navy, Norwegian Navy, and Peruvian Navy. 20 DT-2 aircraft were built under license by the L-W-F Engineering Company Inc., six by the Naval Aircraft Factory (NAF), and 11 by the Dayton-Wright Company. Another seven were built for Norway under license by Marinens Flyvebåtfabrik. Although still in service when the Germans invaded Norway, the Norwegian DTs did not see action in the Norwegian Campaign. The DT could be fitted either with pontoons or wheeled landing gear and could carry a 1,800 lb (816 kg) torpedo.

The first flight was in November 1921 and production continued until 1929. The DT operated off the U.S. Navy's first aircraft carrier, USS Langley, from land bases, and from seaplane tenders. Several were flown by the Marine Corps.

Variations of the DT-2 aircraft were designated DT-4, DT-5, DT-6, and DTB. Machines licence-built by Dayton-Wright were internally designated SDW by that company. The type became the basis for the Douglas World Cruiser.

Variants

DT-1
Preproduction prototypes; three built.
Douglas DT-2 at Langley EL-2002-00568.jpg
Douglas DT-2 at Langley
DT-2
Two-seat torpedo-bomber biplane, powered by a 450 hp (340 kW) Liberty V-12 piston engine; 64 built.
DT-3
Proposed version of the DT-2. Not built.
DT-4
Four DT-2s converted into bomber aircraft by the Naval Aircraft Factory. The aircraft were fitted with direct-drive Wright T-2 V-12 engines.
DT-5
Redesignation of two DT-4s fitted with a geared 650 hp (480 kW) Wright T-2B V-12 engine.
DT-6
One DT-2 aircraft fitted with a 450 hp (340 kW) Wright P-1 radial piston engine.
DT-2B
This designation was given to one DT-2 aircraft supplied to the Norwegian government. Seven similar aircraft were built under licence in Norway.
DTB
Export version for Peru. Four aircraft built for the Peruvian navy, fitted with 650 hp (480 kW) Wright Typhoon V-12 piston engines.
SDW-1
Redesignation of three DT-2s modified by the Dayton-Wright company.

Operators

A Douglas DT of the U.S. Navy dropping a torpedo. Douglas DT dropping torpedo NAN6-75.jpg
A Douglas DT of the U.S. Navy dropping a torpedo.
Flag of Norway.svg  Norway
Flag of Peru.svg  Peru
Flag of the United States (23px).png  United States

Specifications (DT-2 floatplane)

Data fromMcDonnell Douglas Aircraft since 1920 Vol.1. [1]

General characteristics

Performance

Armament

See also

Related development

Related Research Articles

<span class="mw-page-title-main">Curtiss Falcon</span> American multirole aircraft

The Curtiss Falcon was a family of military biplane aircraft built by the American aircraft manufacturer Curtiss Aeroplane and Motor Company during the 1920s. Most saw service as part of the United States Army Air Corps as observation aircraft with the designations O-1 and O-11, or as the attack aircraft designated the A-3 Falcon.

<span class="mw-page-title-main">Aichi B7A</span> Japanese carrier-borne torpedo and dive bomber

The Aichi B7A Ryusei was a large and powerful carrier-borne torpedo-dive bomber produced by Aichi Kokuki for the Imperial Japanese Navy Air Service during the Second World War. Built in only small numbers and deprived of the aircraft carriers it was intended to operate from, the type had little chance to distinguish itself in combat before the war ended in August 1945.

<span class="mw-page-title-main">Douglas YOA-5</span> American seaplane bomber prototype

The Douglas YOA-5 was an amphibious aircraft designed for the United States Army Air Corps, based on the Navy's Douglas XP3D. Although a prototype was built, it did not enter production.

<span class="mw-page-title-main">Douglas XB-19</span> American bomber prototype

The Douglas XB-19 was a four-engined, piston-driven heavy bomber produced by the Douglas Aircraft Company for the United States Army Air Forces (USAAF) during the early 1940s. The design was originally given the designation XBLR-2. It was the largest bomber built for the USAAF until 1946, with the Convair B-36 surpassing it in size.

<span class="mw-page-title-main">Kyushu Q1W</span> Japanese anti-submarine patrol aircraft

The Kyūshū Q1WTōkai was a land-based anti-submarine patrol bomber aircraft developed for the Imperial Japanese Navy in World War II. The Allied reporting name was Lorna. Although similar in appearance to the German Junkers Ju 88 medium bomber, the Q1W was a much smaller aircraft with significantly different design details.

<span class="mw-page-title-main">Mitsubishi B1M</span> Japanese carrier-borne torpedo bomber

The Mitsubishi B1M was a Japanese torpedo bomber of the 1920s, also known as the Navy Type 13 Carrier-Borne Attack Aircraft. It was designed and built by Mitsubishi and used in combat against China. The aircraft was used by the air services of the Imperial Japanese Navy and Imperial Japanese Army.

<span class="mw-page-title-main">Douglas BTD Destroyer</span> 1943 dive/torpedo bomber model by Douglas

The Douglas BTD Destroyer is an American dive/torpedo bomber developed for the United States Navy during World War II. A small number had been delivered before the end of the war, but none saw combat.

<span class="mw-page-title-main">Mitsubishi B2M</span> Japanese torpedo bomber

The Mitsubishi B2M was a Japanese carrier-based torpedo bomber of the 1920s and 1930s. It was built by Mitsubishi to a design by Blackburn Aircraft of Britain and was operated by the Imperial Japanese Navy.

<span class="mw-page-title-main">Nakajima G5N</span> Type of aircraft

The Nakajima G5N Shinzan was a four-engined long-range heavy bomber designed and built for the Imperial Japanese Navy prior to World War II. The Navy designation was "Experimental 13-Shi Attack Bomber"; the Allied code name was "Liz".

<span class="mw-page-title-main">Blackburn Dart</span> 1921 torpedo bomber series by Blackburn

The Blackburn Dart was a carrier-based torpedo bomber biplane aircraft, designed and manufactured by the British aviation company Blackburn Aircraft. It was the standard single-seat torpedo bomber operated by the Fleet Air Arm (FAA) between 1923 and 1933.

<span class="mw-page-title-main">Douglas T2D</span> Type of aircraft

The Douglas T2D was an American twin-engined torpedo bomber contracted by the military, and required to be usable on wheels or floats, and operating from aircraft carriers. It was the first twin-engined aircraft to be operated from an aircraft carrier.

<span class="mw-page-title-main">Avro 571 Buffalo</span> Type of aircraft

The Avro 571 Buffalo was a prototype British carrier-based torpedo bomber biplane, designed and built by Avro in the 1920s. It was not selected for service, the Blackburn Ripon being ordered instead.

<span class="mw-page-title-main">Caproni Ca.135</span> Type of aircraft

The Caproni Ca.135 was an Italian medium bomber designed in Bergamo in Italy by Cesare Pallavicino. It flew for the first time in 1935, and entered service with the Peruvian Air Force in 1937, and with the Regia Aeronautica in January 1938.

<span class="mw-page-title-main">Curtiss Model R</span> Type of aircraft

The Curtiss Model R was a utility aircraft produced for the United States Army and Navy during World War I. It was a conventional, two-bay biplane with slightly staggered wings of unequal span. The aircraft was provided with two open cockpits in tandem and fixed tailskid undercarriage, but many were built for the Navy with twin floats replacing the wheels. During the course of the war, Model Rs were used for general liaison and communication duties, as well for observation, training, and as air ambulances. In practice, the Curtiss powerplants supplied with these aircraft proved insufficient and were mostly replaced with Liberty engines. The Navy's Model R-3 floatplane had extended-span, three-bay wings, and was intended for use as a torpedo bomber. Some of these were later fitted with wheeled undercarriage and transferred to the Army as bombers under the designation Model R-9.

<span class="mw-page-title-main">Martin T3M</span> Type of aircraft

The Martin T3M was an American torpedo bomber of the 1920s. A single-engined three-seat biplane, it became a standard torpedo bomber of the U.S. Navy, operating from both land bases and from aircraft carriers from 1926 to 1932.

<span class="mw-page-title-main">Fokker T.IV</span> Type of aircraft

The Fokker T.IV was a Dutch torpedo bomber/maritime reconnaissance floatplane of the 1920s and 1930s. First flying in 1927, it served with the Dutch Naval Aviation Service in the Dutch East Indies until the remaining aircraft were destroyed during the Japanese invasion in 1942.

<span class="mw-page-title-main">Mitsubishi K3M</span> Japanese trainer aircraft

The Mitsubishi K3M was a trainer built by Mitsubishi which was used by the Imperial Japanese Navy in an extremely wide variety of roles, including light transport, liaison aircraft, utility aircraft and occasionally light bomber. Its Allied reporting name was Pine.

<span class="mw-page-title-main">Handley Page Hanley</span> Type of aircraft

The Handley Page Hanley was a British torpedo bomber aircraft of the 1920s. A single-engine, single-seat biplane intended to operate from the Royal Navy's aircraft carriers, it was not successful, with only three aircraft being built.

The Marinens Flyvebaatfabrikk M.F.3 was a reconnaissance floatplane built by the Royal Norwegian Navy Air Service aircraft factory Marinens Flyvebaatfabrikk in 1917. The aircraft was financed by extraordinary appropriations during the First World War and served until October 1924.

<span class="mw-page-title-main">G Elias & Brother</span> American Aircraft Manufacturer

G Elias & Brother was an American manufacturer of cabinets and aircraft based in Buffalo, New York in the 1920s. A.G. Elias sat on the Manufacturers Aircraft Association's board of directors along with President Frank H. Russell, VP Glenn L. Martin, Charles L. Laurence, Chance M. Vought, S.S. Bradley, George P. Tidmarsh, and Donald Douglas. E.J Elias promoted the construction of a Buffalo municipal airport to aid the local fledgling airplane industry of five aviation companies constructing airplanes and airplane parts. From 1920 to 1925, Elias company's chief engineer, David Earle Dunlap (1896-1957), designed the Elias EM-2 Expeditionary planes. He designed the NBS-3 bomber fuselage and the Elias M-1 Mail plane. Dunlap's Elias TA-1 design was the first United States Army Air Corps Trainer to have a radial engine. After tests a McCook Field, the Army Air Corps selected other manufacturers over the Elias bomber and trainer. The company designed the Elias EM-1 to meet requirements for a multirole amphibian marine expeditionary aircraft. Elias delivered six production Elias EM-2 aircraft with Liberty engines to the United States Navy in 1922.

References

  1. Francillon, Rene J. (1988). McDonnell Douglas Aircraft since 1920. Vol. 1 (2nd revised ed.). London: Putnam & Company Ltd. pp. 45–55. ISBN   0-87021-428-4.

Commons-logo.svg Media related to Douglas DT at Wikimedia Commons