| NO | |
|---|---|
 | |
| Martin M2O-1 leading a Martin MS-1 in July 1923 | |
| Role | Naval observation floatplane |
| National origin | United States |
| Manufacturer | Naval Aircraft Factory, Martin |
| Designer | Bureau of Aeronautics |
| First flight | 1923 |
| Retired | 1927 |
| Primary user | United States Navy |
| Number built | 6 |
Naval Aircraft Factory NO was an American short-range reconnaissance/gun spotting aircraft of the 1920s. A single-engined three-seat biplane with alternative floats or wheels, six were built for the U.S. Navy.
The NO was designed at the U.S. Navy Bureau of Aeronautics (BuAer) as a single-engined single-bay sesquiplane capable of being fitted with either a conventional tailwheel undercarriage or two floats. It was fitted with a 435 hp (324 kW) Curtiss D-12 water-cooled V-12 engine, with a radiator installed between the floats or wheels, depending on such configuration. [1]
The design featured the use of W-type (aka Warren truss) and N-type wing bracing struts, that offered both compression and tension resistance to static and dynamic loads, instead of the traditional tension wires employed on many biplanes of the period. This structural principle had been incorporated successfully in the design of the Naval Aircraft Factory TS fighter, as designed by Rex Beisel when employed at BuAer, and later also used on the Martin MS submarine-based biplane that required rapid assembly and rigging. [1]
The three crew occupied separate open cockpit stations, and the rearmost cockpit was equipped with a swivel-mounted machine gun for defense. [1] Small differences observed between the Martin and NAF versions included exhaust stacks, fin and rudder shapes, and presence or omission of a propeller spinner. [2]
In 1923, pre-production construction contracts were issued to both the Naval Aircraft Factory (NAF) and Glenn L. Martin Company (as Martin Model 60), each for three aircraft, designated Naval Aircraft Factory NO and Martin M2O respectively. Deliveries of the Martin M2O-1 started in 1923, and all six aircraft were completed by the end of 1924. The NAF-built aircraft were assigned serial numbers A-6431 to A-6433 (initially designated as NO-1), and A-6452 to A-6454 were assigned to the Martin M2O-1 aircraft. Subsequently, the third NO-1 (serial number A-6433) was converted with a 440 hp Packard 1A-1500 and redesignated as NO-2. Photos have shown that at least two Martin M2O-1 (A-6452 and A-6454), were configured with wheeled undercarriage during their service. [1] [3] [4]
The type proved to be no better than the Vought UO in the gun spotting role, [5] and was never placed into quantity production. All six were withdrawn from use by the end of 1927. [1]
Data from United States Navy Aircraft since 1911 [2]
General characteristics
Performance
Armament
The Curtiss Falcon was a family of military biplane aircraft built by the American aircraft manufacturer Curtiss Aeroplane and Motor Company during the 1920s. Most saw service as part of the United States Army Air Corps as observation aircraft with the designations O-1 and O-11, or as the attack aircraft designated the A-3 Falcon.
The Naval Aircraft Factory (NAF) was established by the United States Navy in 1918 in Philadelphia, Pennsylvania. It was created to help solve aircraft supply issues which faced the Navy Department upon the entry of the U.S. into World War I. The US Army’s requirements for an enormous quantity of airplanes created a decided lack of interest among aircraft manufacturers in the Navy's requirements for a comparatively small quantity of aircraft. The Navy Department concluded that it was necessary to build a Navy-owned aircraft factory in order to assure a part of its aircraft supply; to obtain cost data for the department’s guidance in its dealings with private manufacturers; and to have under its own control a factory capable of producing experimental designs.
The Curtiss SBC Helldiver was a two-seat scout bomber and dive bomber built by the Curtiss-Wright Corporation. It was the last military biplane procured by the United States Navy. Delivered in 1937, it became obsolete even before World War II and was kept well away from combat with Axis fighters.
The Curtiss SOC Seagull was an American single-engined scout observation seaplane, designed by Alexander Solla of the Curtiss-Wright Corporation for the United States Navy. The aircraft served on battleships and cruisers in a seaplane configuration, being launched by catapult and recovered from a sea landing. The wings folded back against the fuselage for storage aboard ship. When based ashore or on carriers the single float was replaced by fixed wheeled landing gear.
The Hall XPTBH was a prototype American twin-engined seaplane, submitted to the United States Navy by the Hall Aluminum Aircraft Corporation in response to a 1934 specification for new bomber and scout aircraft. Constructed in an innovative fashion that made extensive use of aluminum, the XPTBH proved successful in flight testing, but failed to win favor with the U.S. Navy. No production contract was awarded, and the single aircraft built served in experimental duties before its destruction in a hurricane during 1938.
The Boeing Model 15 was a United States single-seat open-cockpit biplane fighter aircraft of the 1920s, manufactured by the Boeing company. The Model 15 saw service with the United States Army Air Service and with the United States Navy as a carrier-based fighter.
The Naval Aircraft Factory TS-1 was an early biplane fighter aircraft of the United States Navy, serving from 1922 to 1929.
The Curtiss 18T, unofficially known as the Wasp and by the United States Navy as the Kirkham, was an early American triplane fighter aircraft designed by Curtiss for the US Navy.
The Naval Aircraft Factory PN was a series of open cockpit American flying boats of the 1920s and 1930s. A development of the Felixstowe F5L flying boat of the First World War, variants of the PN were built for the United States Navy by Douglas, Keystone and Martin.
The Curtiss CS was a reconnaissance and torpedo bomber aircraft used by the United States Navy during the 1920s. It was a large single-engine biplane with single-bay unstaggered wings, the design conventional in all respects other than that the lower wing was of greater span than the upper. The CS was built to allow its undercarriage to be quickly and easily interchangeable between wheeled, tailskid undercarriage, and twin pontoons for operation from water. Provision for the carriage of a torpedo was semi-recessed into the underside of the fuselage, blended in behind an aerodynamic fairing. The pilot and gunner sat in tandem open cockpits, while accommodation inside the fuselage was provided for a third crewmember who served as bombardier and radio operator. This station was also provided with a dorsal hatch aft of the gunner's position, and a ventral blister aft of the torpedo recess, which was used for aiming bombs or torpedoes.
The Curtiss Model R was a utility aircraft produced for the United States Army and Navy during World War I. It was a conventional, two-bay biplane with slightly staggered wings of unequal span. The aircraft was provided with two open cockpits in tandem and fixed tailskid undercarriage, but many were built for the Navy with twin floats replacing the wheels. During the course of the war, Model Rs were used for general liaison and communication duties, as well for observation, training, and as air ambulances. In practice, the Curtiss powerplants supplied with these aircraft proved insufficient and were mostly replaced with Liberty engines. The Navy's Model R-3 floatplane had extended-span, three-bay wings, and was intended for use as a torpedo bomber. Some of these were later fitted with wheeled undercarriage and transferred to the Army as bombers under the designation Model R-9.
The Great Lakes BG was an American carrier-based dive bomber of the 1930s. Designed and built by the Great Lakes Aircraft Company of Cleveland, Ohio, 61 were used by the United States Navy and United States Marine Corps from 1934 to 1940.
The Martin T3M was an American torpedo bomber of the 1920s. A single-engined three-seat biplane, it became a standard torpedo bomber of the U.S. Navy, operating from both land bases and from aircraft carriers from 1926 to 1932.
The Martin T4M was an American torpedo bomber of the 1920s. A development by the Glenn L. Martin Company of their earlier Martin T3M, and, like it a single-engined biplane, the T4M served as the standard torpedo bomber aboard the aircraft carriers of the United States Navy through much of the 1930s.
The Thomas Brothers T-2 was an American-built biplane which served with the Royal Navy.
The Berliner-Joyce OJ was an American biplane observation floatplane developed by the Berliner-Joyce Aircraft for the United States Navy during the early 1930s.
The Vought O5U was a 1930s prototype American observation floatplane to meet a United States Navy requirement for a catapult launched scouting aircraft. The contract was won by Curtiss who went on to produce the SOC Seagull; only one O5U was built.
The Curtiss CT-1 model 24, a twin engine torpedo bomber mounted on floats, was first flown in 1921.
The Curtiss GS aircraft were two types of similar scout aircraft designed and built by the Curtiss Aeroplane and Motor Company for the United States Navy.
The Naval Aircraft Factory N-1 or Davis Gun Carrier was a 1918 maritime patrol aircraft built by the Naval Aircraft Factory (NAF), the in-house aircraft production arm of the United States Navy. A floatplane of biplane configuration with a single Liberty L-12 engine driving a pusher propeller, it was the first aircraft to be both designed and built by the NAF, and was designed to carry the Davis gun, the first recoilless gun. The first prototype crashed during its maiden flight due to poorly designed floats but was rebuilt. However, the aircraft's performance did not meet expectations, and navy leaders canceled the program after 2 of the 4 prototypes were subsequently damaged in serious crashes.
 | This article on an aircraft of the 1920s is a stub. You can help Wikipedia by expanding it. |