Molasse basin

Last updated

The Molasse basin (or North Alpine foreland basin) is a foreland basin north of the Alps which formed during the Oligocene and Miocene epochs. The basin formed as a result of the flexure of the European plate under the weight of the orogenic wedge of the Alps that was forming to the south.

Contents

In geology, the name "molasse basin" is sometimes also used in a general sense for a synorogenic (formed contemporaneously with the orogen) foreland basin of the type north of the Alps. The basin is the type locality of molasse, a sedimentary sequence of conglomerates and sandstones, material that was removed from the developing mountain chain by erosion and denudation, that is typical for foreland basins.

The Bavarian Alps rise from the green hills of the Molasse basin. The hills consist of tilted molasse beds, erosional material transported from the mountains into their foreland. Bavarian Alps 2002.jpg
The Bavarian Alps rise from the green hills of the Molasse basin. The hills consist of tilted molasse beds, erosional material transported from the mountains into their foreland.

Geographic location

The Molasse basin stretches over 1000 kilometers along the long axis of the Alps, in France, Switzerland, Germany and Austria. The west end is at Lake Geneva, where the basin's outcrop is just 20 km wide. Further to the northeast the basin becomes wider. It forms the subsurface of the Swiss Mittelland and reaches its widest (circa 130 km) in the Bavarian foreland of the Alps. From Amstetten to Sankt Pölten the basin forms a narrow band, just 10 km wide. After that it widens again to the east. North of the Danube River it connects with the Vienna basin, and is thus connected with the Pannonian Basin further east.

The region where the molasse crops out is divided into two: the Subalpine Molasse zone along the Alps and the Foreland Molasse zone further into the foreland. In the Foreland Molasse zone the molasse sediments are relatively undisturbed; in the Subalpine Molasse zone the beds are often tilted, folded and thrust over each other.

Tectonic history

Before the development of the Molasse basin, in the Mesozoic era, the region was covered by a shallow sea that was the northern margin of the Alpine part of the Tethys Ocean (Valais Ocean in the west, Tethys Ocean proper in the east). The Molasse basin was formed when the orogenic wedge of the forming Alps was pushed north over the European continental margin, due to the convergent movement of the European and Apulian plates during the Paleogene period. The weight of the orogenic wedge made the European plate bend downward, forming a deep marine foredeep. In the Eocene epoch (55 to 34 million years ago) the basin became deeper until north of the developing orogen it formed a small oceanic trench, in which flysch sediments were deposited.

The huge amounts of sediments eroded from the forming mountain chain filled the basin and made it shallower. During the Oligocene and Miocene epochs (more exactly, between 10 and 30 million years ago), shallow marine to continental molasse was deposited in the basin. Around 10 to 5 million years ago, tectonic uplift had raised the basin so high that net sedimentation stopped. From the south, the molasse deposits were overthrust about 10 kilometers by the Helvetic nappes, which caused the deformation in the Subalpine Molasse zone. The Jura mountains, a fold and thrust belt along the present Swiss-French border, also originated from this tectonic phase. In some places in the Jura mountains, molasse deposits were folded together with older Mesozoic limestones. In present-day central Switzerland, however, the molasse formed a thick competent mass that was thrust northward in one piece over a decollement horizon at the base of the Mesozoic, in Triassic evaporites. Deformation instead localized further north, thus forming the relatively flat Swiss Mittelland between the Alps and the Jura Mountains. [1] The Swiss part of the Molasse basin is now between the Alps and the Jura mountains, as a large piggyback basin. In the Eastern Alps an external mountain range such as the Jura Mountains never developed. Due to the last phase of tectonic uplift around 5 million years ago, the molasse in the Swiss Plateau, the South Bavarian plain and Eastern Austria is now 350 to 400 meters above sea level at its northern rim, slowly rises southwards and can reach more than 1,000 m at its contact with the Alps.

Alternating grey fluviatile sands and red silty marls of the Lower Freshwater Molasse at Wallenried, Switzerland. USM fluviatile sandstone Wallenried.JPG
Alternating grey fluviatile sands and red silty marls of the Lower Freshwater Molasse at Wallenried, Switzerland.

Stratigraphy

The molasse deposits in the basin can be up to 6 kilometers thick. Lithostratigraphically, this molasse is treated as a group divided into four formations. This division is made on whether the sedimentary facies is continental or marine.

The lowermost formation is the Lower Marine Molasse (in German: Untere Meeresmolasse). Its age is Rupelian (early Oligocene, 34 to 28 million years old) and it consists of shallow marine sand, clay and marl.

On top of this is the Lower Freshwater Molasse (German: Untere Süsswassermolasse) of Chattian and Aquitanian age (late Oligocene-early Miocene, 28 to 22 million years old). Due to a eustatic drop of the sea level combined by tectonic uplift, the basin was now above sea level. This second formation therefore consists of fluviatile sands and clays and huge alluvial fan systems (conglomerates and breccias) originating from the Alps to the south.

By 22 million years ago, the Alpine foreland was flooded again due to tectonic subsidence. A shallow (intertidal) marine environment formed from Lyon to Vienna. In this environment the third formation, the Upper Marine Molasse (German: Obere Meeresmolasse), was formed. It consists of marine sands, clays and marls and new fan conglomerates and is of Burdigalian to Langhian age (early Miocene, 22 to 16 million years old).

More tectonic uplift caused the sea to retreat one final time and during the Serravallian, Tortonian and Messinian/Pontian ages (late Miocene, 16 to 5 million years ago), the basin was in a continental facies again. The fluviatile sands and clays and fan conglomerates of this time form the Upper Freshwater Molasse (German: Obere Süsswassermolasse), the topmost molasse formation. [2]

Around 5 million years ago a phase of uplift occurred in the Alps. During this phase the Molasse basin ceased to be an area of net sedimentation.

Related Research Articles

<span class="mw-page-title-main">Orogeny</span> The formation of mountain ranges

Orogeny is a mountain-building process that takes place at a convergent plate margin when plate motion compresses the margin. An orogenic belt or orogen develops as the compressed plate crumples and is uplifted to form one or more mountain ranges. This involves a series of geological processes collectively called orogenesis. These include both structural deformation of existing continental crust and the creation of new continental crust through volcanism. Magma rising in the orogen carries less dense material upwards while leaving more dense material behind, resulting in compositional differentiation of Earth's lithosphere. A synorogenic process or event is one that occurs during an orogeny.

<span class="mw-page-title-main">Geology of the Alps</span> The formation and structure of the European Alps

The Alps form part of a Cenozoic orogenic belt of mountain chains, called the Alpide belt, that stretches through southern Europe and Asia from the Atlantic all the way to the Himalayas. This belt of mountain chains was formed during the Alpine orogeny. A gap in these mountain chains in central Europe separates the Alps from the Carpathians to the east. Orogeny took place continuously and tectonic subsidence has produced the gaps in between.

<span class="mw-page-title-main">Tethys Ocean</span> Prehistoric ocean between Gondwana and Laurasia

The Tethys OceanTEETH-iss, TETH-, also called the Tethys Sea or the Neo-Tethys, was a prehistoric ocean during much of the Mesozoic Era and early-mid Cenozoic Era. It was the predecessor to the modern Indian Ocean, the Mediterranean Sea, and the Eurasian inland marine basins.

<span class="mw-page-title-main">Flysch</span> Type of sedimentary rock sequence

Flysch is a sequence of sedimentary rock layers that progress from deep-water and turbidity flow deposits to shallow-water shales and sandstones. It is deposited when a deep basin forms rapidly on the continental side of a mountain building episode. Examples are found near the North American Cordillera, the Alps, the Pyrenees and the Carpathians.

<span class="mw-page-title-main">Swiss Plateau</span> Plateau in the European Alps

The Swiss Plateau or Central Plateau is one of the three major landscapes in Switzerland, lying between the Jura Mountains and the Swiss Alps. It covers about 30% of the Swiss surface area, and is partly flat but mostly hilly. The average height is between 400 metres (1,300 ft) and 700 metres (2,300 ft) AMSL. It is by far the most densely populated region of Switzerland, the center of economy and important transportation.

<span class="mw-page-title-main">Helvetic (geology)</span>

The Helvetic zone, Helvetic system or the Helveticum is a geologic subdivision of the Alps. The Helvetic zone crops out mainly in Switzerland, hence the name. Rocks in the Helvetic zone are sedimentary and were originally deposited at the southern margin of the European plate. The Helvetic zone correlates with the French Dauphinois zone, French geologists often prefer the French name but normally this is considered the same thing.

<span class="mw-page-title-main">Foreland basin</span> Structural basin that develops adjacent and parallel to a mountain belt

A foreland basin is a structural basin that develops adjacent and parallel to a mountain belt. Foreland basins form because the immense mass created by crustal thickening associated with the evolution of a mountain belt causes the lithosphere to bend, by a process known as lithospheric flexure. The width and depth of the foreland basin is determined by the flexural rigidity of the underlying lithosphere, and the characteristics of the mountain belt. The foreland basin receives sediment that is eroded off the adjacent mountain belt, filling with thick sedimentary successions that thin away from the mountain belt. Foreland basins represent an endmember basin type, the other being rift basins. Space for sediments is provided by loading and downflexure to form foreland basins, in contrast to rift basins, where accommodation space is generated by lithospheric extension.

<span class="mw-page-title-main">Paratethys</span> Prehistoric shallow inland sea in Eurasia

The Paratethys sea, Paratethys ocean, Paratethys realm or just Paratethys was a large shallow inland sea that stretched from the region north of the Alps over Central Europe to the Aral Sea in Central Asia.

The Helvetic nappes are a series of nappes in the Northern part of the Alps and part of the Helvetic zone. They consist of Mesozoic limestones, shales and marls that were originally deposited on the southern continental margin of the European continent. During the Alpine orogeny they were thrust north over a décollement and at the same time were internally deformed by folding and thrusting.

<span class="mw-page-title-main">Geology of the Western Carpathians</span>

The Western Carpathians are an arc-shaped mountain range, the northern branch of the Alpine-Himalayan fold and thrust system called the Alpide belt, which evolved during the Alpine orogeny. In particular, their pre-Cenozoic evolution is very similar to that of the Eastern Alps, and they constitute a transition between the Eastern Alps and the Eastern Carpathians.

<span class="mw-page-title-main">Geology of the Pyrenees</span> European regional geology

The Pyrenees are a 430-kilometre-long, roughly east–west striking, intracontinental mountain chain that divide France, Spain, and Andorra. The belt has an extended, polycyclic geological evolution dating back to the Precambrian. The chain's present configuration is due to the collision between the microcontinent Iberia and the southwestern promontory of the European Plate. The two continents were approaching each other since the onset of the Upper Cretaceous (Albian/Cenomanian) about 100 million years ago and were consequently colliding during the Paleogene (Eocene/Oligocene) 55 to 25 million years ago. After its uplift, the chain experienced intense erosion and isostatic readjustments. A cross-section through the chain shows an asymmetric flower-like structure with steeper dips on the French side. The Pyrenees are not solely the result of compressional forces, but also show an important sinistral shearing.

<span class="mw-page-title-main">Andean orogeny</span> Ongoing mountain-forming process in South America

The Andean orogeny is an ongoing process of orogeny that began in the Early Jurassic and is responsible for the rise of the Andes mountains. The orogeny is driven by a reactivation of a long-lived subduction system along the western margin of South America. On a continental scale the Cretaceous and Oligocene were periods of re-arrangements in the orogeny. The details of the orogeny vary depending on the segment and the geological period considered.

<span class="mw-page-title-main">Geology of Germany</span> Overview of the geology of Germany

The geology of Germany is heavily influenced by several phases of orogeny in the Paleozoic and the Cenozoic, by sedimentation in shelf seas and epicontinental seas and on plains in the Permian and Mesozoic as well as by the Quaternary glaciations.

The geology of Morocco formed beginning up to two billion years ago, in the Paleoproterozoic and potentially even earlier. It was affected by the Pan-African orogeny, although the later Hercynian orogeny produced fewer changes and left the Maseta Domain, a large area of remnant Paleozoic massifs. During the Paleozoic, extensive sedimentary deposits preserved marine fossils. Throughout the Mesozoic, the rifting apart of Pangaea to form the Atlantic Ocean created basins and fault blocks, which were blanketed in terrestrial and marine sediments—particularly as a major marine transgression flooded much of the region. In the Cenozoic, a microcontinent covered in sedimentary rocks from the Triassic and Cretaceous collided with northern Morocco, forming the Rif region. Morocco has extensive phosphate and salt reserves, as well as resources such as lead, zinc, copper and silver.

The geology of Austria consists of Precambrian rocks and minerals together with younger marine sedimentary rocks uplifted by the Alpine orogeny.

<span class="mw-page-title-main">Geology of Kyrgyzstan</span>

The geology of Kyrgyzstan began to form during the Proterozoic. The country has experienced long-running uplift events, forming the Tian Shan mountains and large, sediment filled basins.

The geology of Romania is structurally complex, with evidence of past crustal movements and the incorporation of different blocks or platforms to the edge of Europe, driving recent mountain building of the Carpathian Mountains. Romania is a country located at the crossroads of Central, Eastern, and Southeastern Europe. It borders the Black Sea to the southeast, Bulgaria to the south, Ukraine to the north, Hungary to the west, Serbia to the southwest, and Moldova to the east.

The geology of Greece is highly structurally complex due to its position at the junction between the European and African tectonic plates.

<span class="mw-page-title-main">Geology of Italy</span> Overview of the geology of Italy

The geology of Italy includes mountain ranges such as the Alps and the Apennines formed from the uplift of igneous and primarily marine sedimentary rocks all formed since the Paleozoic. Some active volcanoes are located in Insular Italy.

The geology of Argentina includes ancient Precambrian basement rock affected by the Grenville orogeny, sediment filled basins from the Mesozoic and Cenozoic as well as newly uplifted areas in the Andes.

References

  1. Labhart (2005), p. 64
  2. Labhart (2005), pp. 20-24

Literature

47°46′08″N10°08′25″E / 47.76889°N 10.14028°E / 47.76889; 10.14028