Norfolk and Western 2050

Last updated
Norfolk and Western 2050
Norfolk & Western 2050.jpg
Norfolk and Western 2050 on static display at the Illinois Railway Museum on September 19, 2015
Type and origin
References: [1] [2] [3]
Power typeSteam
Builder ALCO's Richmond Works
Serial number64070
Build dateMarch 1923
Specifications
Configuration:
​
 •  Whyte 2-8-8-2
 •  UIC (1′D)D1′ hv4
Gauge 4 ft 8+1⁄2 in (1,435 mm)
Leading dia. 30 in (760 mm)
Driver dia.57 in (1,400 mm)
Trailing dia. 30 in (760 mm)
Tender wheels33 in (840 mm)
Wheelbase 67 ft 4 in (20.52 m) ​
 • incl. tender93 ft 3 in (28.42 m)
Length113 ft 3 in (34.52 m)
Width11 ft 3 in (3.43 m)
Height15 ft 8+5⁄8 in (4.79 m)
Adhesive weight 478,000 lb (217,000 kg)
Loco weight531,000 lb (241,000 kg)
Tender weight209,100 lb (94,800 kg)
Total weight740,100 lb (335,700 kg)
Fuel type Coal
Fuel capacity30 t (30 long tons; 33 short tons)
Water cap.22,000 US gal (83,000 L; 18,000 imp gal)
Firebox:​
 • Grate area96 sq ft (8.9 m2)
Boiler:
​
 • TypeStraight Top
 • Diameter98 in (2,500 mm)
 • Small tubes2+1⁄4 in (57 mm)
 • Large tubes5+1⁄2 in (140 mm)
Boiler pressure270 psi (1.862 MPa)
Heating surface:​
 • Firebox435 sq ft (40.4 m2)
 • Tubes3,860 sq ft (359 m2)
 • Flues1,825 sq ft (169.5 m2)
 • Total surface6,120 sq ft (569 m2)
Superheater:
​
 • Heating area145 sq ft (13.5 m2)
Cylinders Four: two low-pressure (front), two high-pressure (rear)
High-pressure cylinder25 in × 32 in (640 mm × 810 mm)
Low-pressure cylinder39 in × 32 in (990 mm × 810 mm)
Valve gear Baker
Valve typePiston
Loco brake 6ET [4]
Performance figures
Tractive effort (Simple: 136,985 lbf (609.3 kN)) (Compound: 114,154 lbf (507.8 kN)) [5]
Career
Operators Norfolk and Western Railway
Class Y3a
Number in class1 of 30
NumbersN&W 2050
Retired1959
Preserved1975
Current owner Illinois Railway Museum
DispositionOn static display

Norfolk and Western 2050 is a Y3a class 2-8-8-2 Compound Mallet steam locomotive built in March 1923 by the American Locomotive Company's (ALCO) Richmond, Virginia Works for the Norfolk and Western Railway (N&W). The locomotive primarily helped haul the N&W's freight and coal trains, but by the end of the 1950s, it was relegated as a hump yard switcher.

Contents

Retired from service in 1959, No. 2050 was sold for scrap to the Armco Steel Corporation of Middletown, Ohio, but it was withheld as a stationary boiler. Following some conversations and sentimentality between Armco employees and Illinois Railway Museum (IRM) members, the locomotive was donated to the IRM in 1975, and it was moved to their property in Union, Illinois the following year. As of 2024, No. 2050 is on static display at the IRM.

History

Construction and design

Throughout 1919, the Norfolk and Western Railway (N&W), which was in need of larger steam locomotives to handle their rising coal traffic over the Blue Ridge Mountains, received fifty United States Railroad Administration (USRA) 2-8-8-2 compound "Mallets" from the American Locomotive Company (ALCO) and the Baldwin Locomotive Works, and the railway classified them as Y3's (Nos. 2000-2049). [1] The USRA 2-8-8-2's were based on the N&W's prototype Y2 class 2-8-8-2 No. 1700, but with some alterations being made to improve its performance. [6]

They were built with 57-inch (1,400 mm) diameter driving wheels, 25-by-32-inch (640 mm × 810 mm) high-pressure cylinders, 36-by-32-inch (910 mm × 810 mm) low-pressure cylinders, and an operating boiler pressure of 240 psi (1.7 MPa), and they were capable of producing 106,000 lbf (471.51 kN) of tractive effort with compound expansion. [1] [2] They were also equipped with a Mellin type by-pass and intercepting valve to change its operations between Simple and Compound. [7] Their tenders originally carried 16 short tons (32,000 lb) of coal and 12,000 US gallons (45,000 L) of water. [2]

The N&W was so satisfied with the Y3's performances that throughout 1923, the company ordered thirty identical copies of the USRA 2-8-8-2's from ALCO's Richmond, Virginia works, and they were classified as Y3a's (Nos. 2050-2079). [1] [8] Beginning in the late 1920s, the N&W rebuilt and modified their Y3's and Y3a's; their boiler pressure was boosted to 270 psi (1.9 MPa), which in turn boosted their tractive effort to 136,985 lbf (609.34 kN) with simple expansion and 114,154 lbf (507.78 kN) with compound expansion. [5] Their tenders were upgraded to hold 30 short tons (60,000 lb) of coal and 22,000 US gallons (83,000 L) of water. [5]

Revenue service and retirement

No. 2050 was the first locomotive of the Y3a class, being built as part of the first batch of ten locomotives in March 1923. [8] [3] No. 2050 quickly joined the older Y3 locomotives in service, being used to pull heavy drag-speed coal trains over steep grades in the Blue Ridge Mountains. [1] [9] By the early 1950s, No. 2050 was reassigned to pull local freight trains in the N&W's Radford Division in and out of Roanoke, Virginia. [10]

Towards the end of the decade, No. 2050 was reassigned again as a hump switcher in Williamson, West Virginia, and then it was transferred to Portsmouth, Ohio, where the locomotive spent its final days of revenue service before it was retired in 1959. [10] Simultaneously, all the other Y3a's and Y3's were also removed from service, as the N&W began dieselizing their roster. [3]

Armco Steel and Illinois Railway Museum ownership

By the end of 1959, No. 2050 was among several Mallet locomotives the N&W sold for scrap to the Armco Steel Corporation in Middletown, Ohio. [9] [10] While most of the other N&W mallets were dismantled, No. 2050 was one of three such locomotives that Armco chose at random to be used as portable stationary boilers around their plant. [10] [11] They were equipped with a 6-inch (15 cm) line on their steam dome, but they were only used as stationary boilers twice before they were left in outdoor storage. [10]

Sometime in the mid-1960s, the other two remaining mallets were scrapped, while No. 2050 was retained as an emergency back-up boiler, but it was never used as such again. [9] [11] As time progressed, some Armco employees had become fond of the No. 2050 locomotive; one of them chalked a poem on the side of its tender, which subsequently became featured in Trains magazine. [10] [12]

My engine now is cold and still.
No water does my boiler fill.
My coal affords its flame no more.
My days of usefulness are o’er.
My wheels denied their wanted speed.
No more thy guiding hand they need.
My whistle too has lost its tone.
Its shrill and thrilling sounds are gone.
My valves are now thrown open wide.
My flanges all refuse to guide.
My steam is now condensed, in death.

— The poem an anonymous Armco employee wrote on N&W No. 2050's tender, [10]

In 1973, the Illinois Railway Museum (IRM) of Union, Illinois became aware of No. 2050's deteriorating status and solicited for it to be donated to them, but Armco—believing the museum wanted to receive the locomotive in good mechanical condition—asked the IRM to pay $37,500, consequently ending the negotiations. [10] Two other museums, including the Roanoke Transportation Museum, also tried to obtain No. 2050 as a donation, but to no avail. [10] [11] In the spring of 1975, one Armco employee, Neil Easter, visited the IRM along with his wife and sons while returning home from a vacation, and upon learning the IRM's interest in No. 2050 from IRM member J. David Conrad, Neil promised to help arrange a donation. [10]

Neil Easter informed Armco management that the IRM was able to perform some required mechanical work on No. 2050 and paying for the shipping costs themselves, and Armco agreed to donate the locomotive to the museum. [9] [10] [13] In September 1975, the IRM authorized a team of mechanics—led by Dave Conrad—to repair No. 2050 to ensure the locomotive would be safely shipped on its wheels, but work did not begin until January 1976, when the IRM formally contracted with Armco to remove the Y3a from their property. [10] [14] No. 2050 was found to be in poor condition, and the crews had to thoroughly clean and lubricate the axles to make the locomotive roll, with Penn Central (PC) having to inspect it twice for eligibility to be moved on their mainline. [9] [10]

Per request of PC, several additional tasks were made to ready No. 2050; old coal was unloaded from the tender; the tender brake cylinder and the footboards were replaced with duplicates; the locked brake rigging was oiled and loosened; and part of the locomotive was jacked up to repair a broken driving wheel spring. [10] On April 19, No. 2050 was towed out of the Armco property and towed in a special consist via Conrail—PC's successor. [10] Upon arrival in Chicago, No. 2050 was transferred to a Chicago and North Western (C&NW) fast freight consist, which towed it to the IRM interchange, and then two of the museum's diesels towed it onto one of the IRM's sidings. [10] Following its arrival at the IRM, No. 2050 underwent a cosmetic restoration led by Jim Kehrein. [10] [14]

Today, 2050 resides inside one of the buildings at the Illinois Railway Museum.

See also

Related Research Articles

<span class="mw-page-title-main">Mallet locomotive</span> Articulated locomotive with compound steam power

A Mallet locomotive is a type of compound articulated steam locomotive, invented by the Swiss engineer Anatole Mallet (1837–1919).

<span class="mw-page-title-main">Norfolk and Western Railway</span> Former US Class I railroad

The Norfolk and Western Railway, commonly called the N&W, was a US class I railroad, formed by more than 200 railroad mergers between 1838 and 1982. It was headquartered in Roanoke, Virginia, for most of its existence. Its motto was "Precision Transportation"; it had a variety of nicknames, including "King Coal" and "British Railway of America". In 1986, N&W merged with Southern Railway to form today's Norfolk Southern Railway.

A 2-8-8-2, in the Whyte notation for describing steam locomotive wheel arrangements, is an articulated locomotive with a two-wheel leading truck, two sets of eight driving wheels, and a two-wheel trailing truck. The equivalent UIC classification is, refined to Mallet locomotives, (1'D)D1'. These locomotives usually employ the Mallet principles of articulation—with the rear engine rigidly attached to the boiler and the front engine free to rotate—and compounding. The 2-8-8-2 was a design largely limited to American locomotive builders. The last 2-8-8-2 was retired in 1962 from the N&W's roster, two years past the ending of steam though steam was still used on steel mill lines and other railroads until 1983.

Under the Whyte notation for the classification of steam locomotives, 0-8-0 represents the wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles and no trailing wheels. Locomotives of this type are also referred to as eight coupled.

Under the Whyte notation for the classification of steam locomotives by wheel arrangement, a 2-6-6-2 is a locomotive with one pair of unpowered leading wheels, followed by two sets of three pairs of powered driving wheels and one pair of trailing wheels. The wheel arrangement was principally used on Mallet-type articulated locomotives, although some tank locomotive examples were also built. A Garratt locomotive or Golwé locomotive with the same wheel arrangement is designated 2-6-0+0-6-2 since both engine units are pivoting.

<span class="mw-page-title-main">USRA 2-6-6-2</span>

The USRA 2-6-6-2 is a standardized design of 2-6-6-2 Mallet locomotives developed by the United States Railroad Administration during World War I.

<span class="mw-page-title-main">Norfolk and Western 2156</span> Preserved N&W Y6a class 2-8-8-2 locomotive

Norfolk and Western 2156 is a preserved Y6a class 2-8-8-2 compound Mallet steam locomotive. The Norfolk and Western Railway (N&W) built it in 1942 at its own Shops in Roanoke, Virginia as the second member of the N&W's Y6a class. No. 2156 and its class are considered to be the world's strongest-pulling extant steam locomotive to ever be built.

The USRA 2-8-8-2 was a USRA standard class of steam locomotive designed under the control of the United States Railroad Administration, the nationalized railroad system in the United States during World War I. These locomotives were of 2-8-8-2 wheel arrangement in the Whyte notation, or (1'D)'D1' in UIC classification. A total of 106 locomotives were built to this plan for the USRA; postwar, it became a de facto standard design.

<span class="mw-page-title-main">Southern Railway 630</span> Preserved American 2-8-0 locomotive (SOU Ks-1 class)

Southern Railway 630 is a 2-8-0 "Consolidation" type steam locomotive built in February 1904 by American Locomotive Company (ALCO) of Richmond, Virginia for the Southern Railway (SOU) as a member of the Ks-1 class. It was primarily assigned to haul freight trains on the Murphy Branch between Asheville and Murphy, North Carolina until its retirement in the 1950s. No. 630, along with sister locomotive No. 722, were sold to the East Tennessee and Western North Carolina Railroad (ET&WNC) to be served as switchers.

<span class="mw-page-title-main">South African Class MA 2-6-6-0</span> 1909 articulated steam locomotive

The South African Railways Class MA 2-6-6-0 of 1909 was a steam locomotive from the pre-Union era in the Natal Colony.

<span class="mw-page-title-main">South African Class MB 2-6-6-0</span> 1910 articulated steam locomotive

The South African Railways Class MB 2-6-6-0 of 1910 was a articulated steam locomotive from the pre-Union era in the Colony of Natal.

The South African Railways Class MC 2-6-6-0 of 1912 was a steam locomotive.

The South African Railways Class MG 2-6-6-2 of 1911 was a steam locomotive from the pre-Union era in Transvaal.

Maine Central Railroad Class O locomotives were originally intended for heavy freight service. They were of 4-6-0 wheel arrangement in the Whyte notation, or "2'C" in UIC classification. They replaced earlier class P 2-6-0 locomotives beginning in 1903. They were in turn replaced by class W 2-8-0 locomotives for the heaviest freight service beginning in 1910, but remained in use on branch line trains until replaced by diesel locomotives after World War II. They proved so well-suited for branch line service the design was among the last steam locomotives built for the Maine Central.

<span class="mw-page-title-main">Atlantic Coast Line 1504</span> Preserved ACL P-5-A class 4-6-2 locomotive

Atlantic Coast Line 1504 is a 4-6-2 steam locomotive built in March 1919 by American Locomotive Company (ALCO) of Richmond, Virginia, for the Atlantic Coast Line Railroad (ACL) as a member of the P-5-A class under the United States Railroad Administration (USRA) standard. No. 1504 was assigned to pull ACL's premier mainline passenger trains during the 1920s to early 40s and even secondary passenger trains and mainline freight trains in the late 1940s until it was retired from revenue service at the end of 1952.

<span class="mw-page-title-main">Atlantic Coast Line R-1 class</span>

The Atlantic Coast Line R-1 was a class of 12 4-8-4 Northern type steam locomotives built by Baldwin Locomotive Works (BLW) in 1938 and operated by the Atlantic Coast Line Railroad until the early 1950s. They were immediately assigned to passenger service but eventually saw service pulling freight.

<span class="mw-page-title-main">Western Maryland Scenic Railroad 734</span> Preserved American 2-8-0 locomotive (LS&I class SC-1)

Western Maryland Scenic Railroad No. 734, also known as Mountain Thunder, is an SC-1 class 2-8-0 “Consolidation” type steam locomotive originally built by the Baldwin Locomotive Works in 1916 for the Lake Superior and Ishpeming Railroad (LS&I) as No. 18. It was renumbered to 34 in 1925. No. 34 was used to pull heavy iron ore trains for the LS&I, until it was retired in 1961. The locomotive was subsequently sold to the Marquette and Huron Mountain Railroad, where it was stored in a sideline alongside other LS&I steam locomotives. In 1971, No. 34 was sold to the Illinois Railway Museum for static display.

<span class="mw-page-title-main">Norfolk and Western 578</span> Preserved N&W Class E2a 4-6-2 locomotive


Norfolk and Western 578 is a preserved 4-6-2 "Pacific" type steam locomotive. Built by ALCO's Richmond Works in 1910, No. 578 was assigned to pull premiere passenger trains for the Norfolk and Western Railway before it was downgraded to secondary passenger service. It was retired from revenue service altogether in 1958, and it was subsequently donated to the Ohio Railway Museum in Worthington, Ohio. The Ohio Railway Museum used No. 578 to pull some tourist trains on their trackage, until it was sidelined as a result of mechanical problems in the early 1970s. As of 2023, No. 578 remains on static display next to the Ohio Railway Museum's depot.

<span class="mw-page-title-main">Norfolk and Western 2174</span> Scrapped N&W Y-6b class 2-8-8-2 locomotive

Norfolk and Western 2174 was a Y6b class 2-8-8-2 compound Mallet steam locomotive, built by the Norfolk and Western Railway's (N&W) own Roanoke Shops, in 1948. No. 2174 and the other Y6bs were notably some of the most powerful steam locomotives ever built, being able to pull heavy freight and coal trains, unassisted. They were also some of the last steam locomotives ever built in the United States.

<span class="mw-page-title-main">Norfolk and Western Y3 and Y3a classes</span> Class of 80 American 2-8-8-2 locomotive

The Norfolk and Western Y3 Class was a class of 2-8-8-2 "Mallet" articulated steam locomotives with a total of 80 locomotives built for the Norfolk and Western Railway between 1919 and 1923.

References

  1. 1 2 3 4 5 Dixon, Parker & Huddleston (2009), p. 45
  2. 1 2 3 Dixon, Parker & Huddleston (2009), p. 46
  3. 1 2 3 Dixon, Parker & Huddleston (2009), p. 59
  4. ↑ "Norfolk & Western 2050". Illinois Railway Museum. Retrieved 2023-10-19.
  5. 1 2 3 Dixon, Parker & Huddleston (2009), p. 48
  6. ↑ Dixon, Parker & Huddleston (2009) , p. 35
  7. ↑ Dixon, Parker & Huddleston (2009) , p. 47
  8. 1 2 Young (2013) , p. 18
  9. 1 2 3 4 5 "Rail Museum Gift Lacks 'Horsepower'". Springfield News-Sun. Vol. 48, no. 39. February 1, 1976. p. 40. Retrieved October 26, 2024– via Newspapers.com.
  10. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Brown, Scott (August 3, 1978). "The 2050 at home in "a place made of dreams"". The Marengo Beacon News. Vol. 7, no. 27. pp.  52–53 . Retrieved October 26, 2024– via Newspapers.com.
  11. 1 2 3 "Steam News Photos" . Trains. Vol. 31, no. 6. Kalmbach Publishing. April 1971. p. 17. Retrieved June 27, 2024.
  12. ↑ "The romance of the rails—alive and well in Union". Chicago Tribune. Vol. 130, no. 237. August 24, 1976. p. 49. Retrieved October 26, 2024– via Newspapers.com.
  13. ↑ Young (2013) , p. 172
  14. 1 2 Huddleston (2002) , p. 86

Bibliography

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.