Norton-Villiers

Last updated

Norton-Villiers
IndustryMotorcycles
Founded1966
Defunct1972
FateMerger
Successor Norton-Villiers-Triumph

Norton-Villiers was a British motorcycle manufacturer formed in the 1960s following the collapse of AMC. With the general decline of the British motorcycle industry, under a British Government initiative it was later combined with the remnants of BSA Triumph to form Norton-Villiers-Triumph.

Contents

Norton Villiers (1966–1973)

In 1966 AMC went bankrupt and were taken over by Manganese Bronze Holdings which formed Norton-Villiers to oversee operations. At the time Norton was the only motorcycle marque in the company that was making money. The AJS and Matchless traditional single cylinder four-stroke models were finished. Matchless and AJS badged models, with Norton motors, were assembled till 1969. In 1968 all models had new carburettors, ignition systems and an ignition lock. The G15CS, N15CS and M33CS had improved cycle parts for 1968–69.

The P11 series was a completely new development for 1967 and was further developed for 1968–69. The P11 was available either as Norton or Matchless.

Norton Commando

For Norton-Villiers the development of a new engine to market was cost-prohibitive, but the vibration of the 750 cc vertical twin was so well transmitted to the rider through the Featherbed frame of the Norton Atlas, that it was dropped in favour of an earlier experimental frame (based on a concept bike designated P10, and later Z26 as an improvement) that would separate the engine from the frame with rubber bushes, creating a more rider-friendly experience. [1]

The Norton Isolastic frame was developed in time for the 1967 Earls CourtShow. Production began in April 1968, but bending problems with the frame resulted in a more-developed frame being introduced in January 1969.

The Norton Commando promptly turned up in racing events, amongst the first being London dealer Vincent Davey running a team under the Gus Kuhn name with riders Dave Croxford and Mick Andrew. [2]

The 1969 Commando S was introduced fitted with a high-level left-side exhaust and a 2.5-imperial-gallon (11 L) petrol tank, primarily aimed at the export (US) market. The original model was thereafter referred to as the Commando Fastback.

Manufacture

In late 1968 the Plumstead works at Burrage Grove, where engines from the Wolverhampton plant and frames from the Manchester plant were assembled into complete machines, were presented with a Greater London Council compulsory purchase order. The Plumstead works closed in July 1969.

A Government subsidy allowed assembly to move to a factory at North Way, Andover, with an aircraft hangar on nearby Thruxton Airfield housing the Test Department. Manufacturing was concentrated at Wolverhampton, with 80 complete machines produced there each week. Wolverhampton also shipped components, assembled engines, and gearboxes to the Andover assembly line.

NV Motorcycle models

Combat engine

The high performance Combat engine gave 65 bhp (48 kW) at 6,500 rpm using 10 :1 compression ratio. It was too much for the stretched old 1948 [3] Model 7 497 cc-based design, with main bearing failures and broken pistons being reported in the press, along with quality control issues. The solution to the main bearing problems was the much-fabled bearings designated "Superblend" by Norton in a 1972 Service Release. [4] These bearings were a 'special' with additional crowning, marked 6/MRJA30 and made by R&M (later RHP). Early in 1973 a superseding service release referred to Extra High Capacity Main Bearings. These were in reality just a higher load capacity roller bearing NJ306E made by FAG. [4] The piston issues were resolved by removing the slot for oil drainage behind the oil ring, and drilling a series of holes instead, so that the piston crown didn't separate from the piston at higher RPMs.

Forced merger

This brought a deterioration in finances. By the middle of 1972 the BSA group was in serious financial trouble as a result of its BSA and Triumph motorcycle activities. The government offered a financial rescue package contingent on a merger of the two groups and Norton-Villiers-Triumph was born.

Sources

Motorcycle History (retrieved 21 October 2006)

Related Research Articles

Norton Motorcycle Company British Motorcycle Manufacturer

The Norton Motorcycle Company is a brand of motorcycles, originally based in Birmingham, England. This company is owned by Indian multinational giant TVS Motor Company. For some years around 1990, the rights to use the name on motorcycles was owned by North American financiers. From 2008 to 2020, a line of motorcycles was produced under owner and chief executive Stuart Garner. Due to financial failure with large debts, in April 2020 administrators BDO agreed to sell certain aspects of Garner's business to Project 303 Bidco Limited, a new business established for the purpose with links to Indian motorcycle producer TVS Motor Company.

AJS British automobile and motorcycle manufacturer from 1909 to 1931

A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles till 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.

Dennis Poore

Roger Dennistoun "Dennis" Poore was a British entrepreneur, financier and sometime racing driver. He became chairman of NVT during the dying days of the old British motorcycle industry.

Matchless British motorcycle and automobile manufacturer

Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.

Geoff Monty British motorcycle racer

Geoff Monty was an English professional motorcycle racer, constructor, rider-sponsor and retail dealer, initially based in Kingston on Thames and later – under the name Monty and Ward – Twickenham areas, near London, with a move to Edenbridge, Kent by 1968.

Associated Motor Cycles former British motorcycle manufacturer

Associated Motor Cycles (AMC) was a British motorcycle manufacturer founded by the Collier brothers as a parent company for the Matchless and AJS motorcycle companies. It later absorbed Francis-Barnett, James, and Norton before incorporation into Norton-Villiers. Henry Herbert Collier founded Matchless as a cycle company in 1878. His sons Henry (Harry) and Charles (Charlie) joined him and the name was changed to H. Collier & Sons.

Norton Villiers Triumph (NVT) was a British motorcycle manufacturer, formed by the British government to continue the UK motorcycling industry, until the company's ultimate demise.

Norton Commando British motorcycle produced from 1967 to 1977

The Norton Commando is a British Norton-Villiers motorcycle with an OHV pre-unit parallel-twin engine, produced by the Norton Motorcycle company from 1967 until 1977. Initially having a nominal 750 cc displacement, actually 745 cc (45.5 cu in), in 1973 it became an 850 cc, actually 828 cc (50.5 cu in). It had a hemi-type head, similar to all OHV Norton engines since the early 1920s.

Peter Williams (motorcyclist) British motorcycle racer

Peter Williams was a British former professional motorcycle racer. He competed in Grand Prix motorcycle road racing from 1966 to 1973. He also competed at many levels on home short-circuit races. He raced many times on the Isle of Man TT course from 1966 to 1973. His father was Jack Williams who ran the Associated Motor Cycles (AMC) race department. Williams trained in mechanical engineering and introduced via racing alloy wheels, an innovation which is commonplace on today's road bikes, and was also an early pioneer of solo-motorcycle disc brakes.

Matchless G50

The Matchless G50 is an historic racing British motorcycle made by Associated Motorcycles (AMC) at the former Matchless works in Plumstead, London. Developed in 1958 from the 350 cc AJS 7R, but with the engine capacity increased to 500 cc, 180 G50s were built in the next four years. Although less powerful than its main competitor the Norton Manx the G50 proved highly competitive at three hundred pounds and was faster round bends. If success is measured by longevity then this is the most successful Matchless motorcycle, and high specification replicas are still being produced to this day, although financial problems at AMC ended production in 1963.

Matchless G12

The Matchless G12 is a British motorcycle made by Associated Motorcycles at the former Matchless works in Plumstead, London. Developed in 1958 specifically to capture the potentially lucrative US market, the last G12 was produced in 1966.

Norton Atlas

The Norton Atlas was a Norton motorcycle made between 1962 and 1968, until it was replaced by the Norton Commando.

Norton P11

The Norton P11 was a 745 cc (45.5 cu in) air-cooled OHV parallel twin motorcycle made by Norton-Villiers from 1967 to 1969. Designed as an extremely light high power-to-weight ratio desert racer, P11 was revised in 1968 to the P11A and marketed as the Norton Ranger, a road legal version of the P11 with a more comfortable seat to make it suitable for normal road use. The Norton P11 gained a reputation as a 'desert racer' in the late 1960s but by 1969 lighter two stroke desert racers began to dominate the sport and the Norton had begun Commando production and it was selling well. Norton ended production of the P11 series to concentrate on the Commando, which used a number of ideas developed on the P11 series.

Norton Isolastic frame

The isolastic frame, designated by Norton as GlideRide, used a system of engine-to-frame mountings incorporating rubber bushes to isolate the vibration of the vertical twin engine from the frame and rider. The isolastic frame was developed for use with the Commando inclined engine, whilst the Featherbed frame continued in production for the Mercury with a softer-specification 650 cc vertical-engine until 1970.

Colin Jordan Seeley was a British motorcycle retailer who later became a motorcycle sidecar racer, motorcycle designer, constructor and retailer of accessories. In 1992 he was involved in running the Norton Rotary race team.

BSA motorcycles

BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

BSA unit twins

The BSA unit twins were a range of unit construction twin-cylinder motorcycles made by the Birmingham Small Arms Company (BSA) and aimed at the US market. A range of 500 cc (31 cu in), 650 cc (40 cu in) and 750 cc (46 cu in) twins were produced between 1962 and 1972, but they were really developments of the older pre-unit A7/A10 model range with less weight. The engines had a reputation for vibration, but acceleration was good for the time, to a top speed of 100 miles per hour (160 km/h).

Norton Commando Production Racer

The Norton Commando Production Racer was a hand built production racer produced by Norton-Villiers from 1970 - 1972. It was based on the road-going Norton Commando, and although fitted with lights it was never intended as a road bike. The model was commonly known as the Yellow Peril.

Norton Interpol

The Norton Interpol was a police motorcycle produced by the British manufacturer Norton between 1969 and 1976. The Interpol was based on the company's Commando model. The 'Interpol' name was retained for Norton's later Norton Interpol 2 rotary engined police motorcycle.

References

  1. Bob Currie, Classic Bikers Club, Retrieved 2013-03-01
  2. Gus Kuhn Racing, Retrieved 2013-03-01
  3. Bacon, Roy (1987). Norton Twin Restoration. London: Osprey. p. 11. ISBN   0-85045-708-4.
  4. 1 2 Heathwood, Andrew (1 March 2018). "A summary of data and information on Norton Commando main bearings" (PDF). Norton Owners Club.