New Imperial Motors

Last updated

New Imperial
Industry Motorcycle
Founded1887
FounderNorman Downes
Defunct1939
FateResurrected by Mutt Motorcycles [1]
Headquarters Digbeth Mutt HQ, ,
Key people
Norman Downes
Products Motorcycles

New Imperial was a British motorcycle manufacturer founded by Norman Downes in Birmingham, between 1887 and 1901, and became New Imperial Motors Ltd in 1912, when serious production commenced. New Imperial made innovative motorcycles that employed unit construction and sprung heel frames long before they became commonplace, and were moderately successful in competition. The 1920s were a financially successful decade, enabling the innovations of the 1930s that fought decline.

Contents

New Imperial suffered financially from the sales-destroying Great Depression of the 1930s, and then the founder died in 1938.[ citation needed ] New Imperial was sold, and sold again, and then ended production in late 1939, its former facilities subsequently serving the needs of a nation at war.

Before First World War

The history of New Imperial, founded by Norman Downes, goes back to the early days of the bicycle industry in Birmingham. From 1887 New Imperial made bicycle fittings and, later, complete bicycles, [2] possibly after he bought the ailing bicycle business of Hearl and Tonks (founded 1892). [3]

It is also said that he created New Imperial in 1901, but no official record of the earliest company formation has been found. Official records do show the formation of a limited company in 1908 called the New Imperial Cycle Company. [4]

In 1901 New Imperial made their first motorcycle. The engine was mounted forward of the handlebars with a leather belt driving the front wheel. It failed to sell. [2] In 1910 a bike went into production using a 293 cc JAP engine. [3]

New Imperial Motors Ltd

1920 New Imperial Light Tourist 300cc New Imperial Light Tourist 300 cc 1920.jpg
1920 New Imperial Light Tourist 300cc

In 1912 the registration of New Imperial Motors Ltd is recorded, [4] and they offered a range of three motorcycles. A New Imperial ridden by A S Jones in the 1913 Senior TT race was one of the 63 that failed to finish that year. (24 competitors finished.)

In 1914, the 300 cc New Imperial Light Tourist model appeared. Its light weight enabled it to outperform some of the heavier 500 cc bikes of its time. The Light Tourist was the beginning of a line of advanced and innovative motorcycles. [2] A New Imperial ridden by Bert le Vack in the 1914 Senior TT race was one of the 44 that failed to finish that year (22 competitors finished). He had a similar result in 1915.

New Imperial used Precision and JAP engines of 250 to 1000 cc in their motorcycles until 1925 after which they manufactured their own engines of 146 cc to 498 cc. [5] The First World War came and went, and New Imperial continued production.

After the First World War

New Imperial made sales-boosting news with a win in the 250 cc class of the 1921 TT (rider Doug Prentice). [2] [6] This was the first of six Isle of Man Lightweight wins by New Imperial, and there was one Junior victory. [6] (The race was not a TT until 1922, therefore the first win was not a proper TT win, but a 250 cc class win.)

By the mid-1920s New Imperial was doing well, making about 300 machines a month, and continued to do so until the Great Depression of the 1930s. From 1926 they manufactured their own engines. [4] Jessie Hole (later Ennis) was sponsored by Norman Downes to be the company's trials rider in 1927. He hoped that this would sell more bikes to women. [7] In 1929 New Imperial production moved from Princip Street in the Gun Quarter to a 6-acre (24,000 m2) purpose-built facility on Spring Road in Hall Green. [4]

Unit construction engines

New Imperial New Imperial 19XX.jpg
New Imperial
1937 New Imperial 500cc 1937 New Imperial 500cc.jpg
1937 New Imperial 500cc

In 1932, New Imperial started to use unit construction, where the engine crankcase and gearbox are incorporated in the same casting. They made a Unit Minor 150 and Unit Super 250. They continued to use unit-construction, and some models used Bentley and Draper sprung frames, in an era still dominated by rigid frames. By 1938 all New Imperial engines employed unit construction. [3] In 1934 Ginger Wood, riding a New Imperial 500 cc V-twin for one hour, achieved a 102.2 mph (164.4 km/h) average at Brooklands. [8] In September 1935 R J D 'Bob' Burnie of Sketty, Swansea, completed 'The Flying Kilometre' at Southport Sands in the British Open Speed Championship on the same bike with a speed of 100.76 mph.

Bob Foster won the 1936 Lightweight TT handsomely on a unit-construction model. This was the last time that Great Britain won a Lightweight TT. [2] Despite the advanced engineering, and the spectacular TT win by Foster, sales did not improve.

Final year

In 1938 Norman Downes died. New Imperial went into liquidation, and a receiver was appointed by Lloyds Bank on 7 November 1938. The receiver advertised the sale of New Imperial on 18 November.

Jack Sangster

Jack Sangster, of Ariel and Triumph, announced on 30 December that he had purchased New Imperial and that production would continue, and on 27 January 1939, production resumed.

Solomon Clifford Joseph

Within a week there were rumours that the company was already being sold to Solomon Joseph, owner of Clifford Covering and Motor Components. The sale was confirmed on 10 February, and production continued. Following the start of World War II, on 22 September 1939 all spare parts were sold to the Colliers, of AMC, who then appointed New Imperial spares dealers.

Clifford Aero and Auto Ltd

Board of Trade records show New Imperial Ltd officially changed their name to Clifford Aero & Auto Ltd., Aeronautical Engineers, on 6 October 1939, and they then produced aeronautical components for the war effort.

Ownership of the name

The name, New Imperial, was reportedly sold to BSA at a later date by Sangster, perhaps when he joined the board of BSA in 1951. The most likely explanation for this is that Sangster bought the name back from Clifford Aero and Auto when they changed over to wartime production, or that Sangster had retained the name and allowed Solomon Joseph to trade under it until war broke out and circumstances changed, but these details are not verifiable. [4] Despite plans to revive the name, it was all over for New Imperial. Mutt motorcycles bought the rights to the New Imperial brand and restarted production of New Imperial motorcycles in Birmingham. [1] The 2018 New Imperial Roadster 125 was the first bike produced since 1939. [9] This was later followed by the New Imperial Tracker 125 in 2019. [1]

See also

Related Research Articles

<span class="mw-page-title-main">Birmingham Small Arms Company</span> Major British industrial combine

The Birmingham Small Arms Company Limited (BSA) was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. A new company, Triumph Motorcycles Ltd, based in Hinckley, gained the name rights after the end of the company in the 1980s and is now one of the world's major motorcycle manufacturers.

<span class="mw-page-title-main">Velocette</span> English motorcycle manufacturer, 1904–1971

Velocette is a line of motorcycles made by Veloce Ltd, in Hall Green, Birmingham, England. One of several motorcycle manufacturers in Birmingham, Velocette was a small, family-owned firm, selling almost as many hand-built motorcycles during its lifetime, as the mass-produced machines of the giant BSA and Norton concerns. Renowned for the quality of its products, the company was "always in the picture" in international motorcycle racing from the mid-1920s until the 1950s, culminating in two World Championship titles and its legendary and still-unbeaten 24 hours at over 100 mph (161 km/h) record. Veloce, while small, was a great technical innovator and many of its patented designs are commonplace on motorcycles today, including the positive-stop foot shift and swinging arm rear suspension with hydraulic dampers. The business suffered a gradual commercial decline during the late 1960s, eventually closing in February 1971.

<span class="mw-page-title-main">AJS</span> British automobile and motorcycle manufacturer from 1909 to 1931

A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles until 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.

<span class="mw-page-title-main">Excelsior Motor Company</span>

Excelsior, based in Coventry, was a British bicycle, motorcycle and car maker. They were Britain’s first motorcycle manufacturer, starting production of their own ‘motor-bicycle’ in 1896. Initially they had premises at Lower Ford Street, Coventry, and 287-295 Stoney Stanton Road, Hillfields, Coventry, Warwickshire before moving to Kings Road, Tyseley, Birmingham in 1921.

<span class="mw-page-title-main">Sunbeam Cycles</span>

Sunbeam Cycles made by John Marston Limited of Wolverhampton was a British brand of bicycles and, from 1912 to 1956 motorcycles.

<span class="mw-page-title-main">Cotton (motorcycle)</span> Former British motorcycle manufacturer

The Cotton Motor Company, was a British motorcycle manufacturer of 11a Bristol Road, Gloucester, and was founded by Frank Willoughby Cotton in 1918. F.W. presided over the company until his retirement in 1953. The company was reconstituted as E. Cotton (Motorcycles) Ltd, and traded until 1980. The marque was later resurrected in the late 1990s by a business which manufactured replicas of earlier machines.

<span class="mw-page-title-main">Ariel Motorcycles</span>

Ariel Motorcycles was a British maker of bicycles and then motorcycles in Bournbrook, Birmingham. It was an innovator in British motorcycling, part of the Ariel marque. The company was sold to BSA in 1951 but the brand survived until 1967. Influential Ariel designers included Val Page and Edward Turner. The last motorcycle-type vehicle to carry the Ariel name was a short-lived three-wheel tilting moped in 1970.

<span class="mw-page-title-main">BSA Gold Star</span> Motorcycle made by BSA from 1938 to 1963.

The BSA Gold Star is a motorcycle made by BSA from 1938 to 1963. They were 350 cc and 500 cc single-cylinder four-stroke production motorcycles known for being among the fastest bikes of the 1950s. Being hand built and with many optional performance modifications available, each motorcycle came from the factory with documented dynamometer test results, allowing the new owner to see the horsepower (bhp) produced.

<span class="mw-page-title-main">Rudge-Whitworth</span> British bicycle, motorcycle and sports car manufacturer

Rudge Whitworth Cycles was a British bicycle, bicycle saddle, motorcycle and sports car wheel manufacturer that resulted from the merger of two bicycle manufacturers in 1894, Whitworth Cycle Co. of Birmingham, founded by Charles Henry Pugh and his two sons Charles Vernon and John, and Rudge Cycle Co. of Coventry.

OK-Supreme was a British motorcycle manufacturer from 1899 to 1939 located in Birmingham. Grass-track racing versions of the machines continued to be available until 1946.

<span class="mw-page-title-main">Edward Turner (motorcycle designer)</span>

Edward Turner was an English motorcycle designer. He was born in Camberwell in the London Borough of Southwark, on the day King Edward VII was proclaimed King. In 1915, Turner had his first ride on a motorcycle, a Light Tourist New Imperial.

<span class="mw-page-title-main">Motorcycle frame</span> Frame of a motorcycle

A motorcycle frame is a motorcycle's core structure. It supports the engine, provides a location for the steering and rear suspension, and supports the rider and any passenger or luggage. Also attached to the frame are the fuel tank and battery. At the front of the frame is found the steering head tube that holds the pivoting front fork, while at the rear there is a pivot point for the swingarm suspension motion. Some motorcycles include the engine as a load-bearing stressed member; while some other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine.

<span class="mw-page-title-main">BSA Rocket Gold Star</span> Type of motorcycle

The BSA Rocket Gold Star (RGS) was a 646 cc (39.4 cu in) air-cooled parallel twin motorcycle produced by Birmingham Small Arms Company (BSA) at Small Heath, Birmingham. Launched in February 1962, it was one of the final range of A10 twins, using a tuned A10 Super Rocket engine in the double-downtube Gold Star frame.

<span class="mw-page-title-main">Excelsior Manxman</span> Type of motorcycle

The Manxman was a motorcycle designed and built by H. J. Hatch and Eric Walker of the Excelsior Motor Company in Tyseley, Birmingham. Although it never won the Isle of Man TT, the Manxman was a very popular and reliable motorcycle which was successful in international racing and the Manx Grand Prix. Production was halted by World War II and did not resume.

<span class="mw-page-title-main">New Imperial Model 76</span> Type of motorcycle

The Model 76 was a New Imperial Motors Ltd motorcycle marketed under the slogan "The King of Motors" between 1936 and 1939, when the company was turned over to wartime production.

The Rover Company was a British bicycle and motorcycle manufacturer before it began the manufacture of motor cars. Rover was established in 1878 by John Kemp Starley in Coventry to produce bicycles. The company developed and produced the Rover Imperial motorcycle in November 1902. Between 1903 and 1924, Rover produced more than 10,000 motorcycles.

Colin Jordan Seeley was a British motorcycle retailer who later became a motorcycle sidecar racer, motorcycle designer, constructor and retailer of accessories. In 1992 he was involved in running the Norton Rotary race team.

<span class="mw-page-title-main">Bill Van Tichelt</span>

Bill VanTichelt ; born February 17, 1935, in Kalamazoo, Michigan, is the creator of VanTech Motorcycles.

<span class="mw-page-title-main">BSA motorcycles</span> Former British motorcycle marque

BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

References

  1. 1 2 3 "Mutt Motorcycles New Imperial Tracker". Mutt Motorcycles.
  2. 1 2 3 4 5 "New Imperial Owners Association History". Archived from the original on 10 October 2006. Retrieved 16 October 2006.
  3. 1 2 3 "Ian Chadwick History" . Retrieved 16 October 2006.
  4. 1 2 3 4 5 "Birmingham Clifford Aero History". Archived from the original on 31 January 2011. Retrieved 16 October 2006.
  5. "CyberMotorcycle History" . Retrieved 16 October 2006.
  6. 1 2 "Isle of Man History" . Retrieved 16 October 2006.
  7. Hewitt, Sam (6 March 2020). "Celebrating heroic women in motorcycling for International Women's Day" . Retrieved 21 July 2023.
  8. "Is-it-a-lemon precis" . Retrieved 16 October 2006.
  9. "New Imperial Roadster Mutt Motorcycles". Mutt Motorcycles.